# Python Bindings for ContamX 

This is the initial implementation of a Python wrapper for `contamx-lib.lib` which is a statically linked library with an API wrapper around ContamX. `contamx-lib` enables control of CONTAM simulations via C-language API. This Python package, `contamxpy`, provides another layer of access, i.e., Python bindings, to `contamx-lib`.  

Driver modules are provided that demonstrate the use of `contamxpy.py`. These drivers import `contamxpy`, obtain a `state`, get properties of the simulation necessary to run from beginning to end, then steps through all the time steps.  

## Usage

Typically, one would work within a Python virtual environment which can be created and activated using the following commands.  
```
$ python -m venv .venv
$ .venv\Scripts\activate  (on Windows)
```   
Install `contamxpy` from PyPI.  
```
$(.venv) python -m pip install contamxpy
```   
Get help for the test module from the command line.
```
test_cxcffi.py -h

Usage: test_cxcffi.py [options] arg1  
    arg1=PRJ filename

Options:
  -h, --help    show this help message and exit
  -v VERBOSE, --verbose=VERBOSE
                define verbose output level: 0=Min, 1=Medium,
                2=Max
```

## Driver Modules

Run example driver modules and associated CONTAM models, i.e., PRJ files. This example command line runs the `test_OneZoneWthCtm.py` module with `test_GetPrjInfo.prj` using the `--verbose=2` command line option and redirects it to a text file named `out.txt`. Review `out.txt` for detailed information obtained from the PRJ file via the `contamxpy` module.  

```
test_OneZoneWthCtm.py test_GetPrjInfo.prj --verbose=2 > out.txt
```
* test_OneZoneWthCtm.py

    - test_OneZoneWthCtm-UseApi.prj
    - test_OneZoneWthCtmStack-UseApi.prj
    - valThreeZonesWthCtm-UseApi.prj
    - testGetPrjInfo.prj

* test_cxcffi.py

    - test_OneZoneWthCtm.prj
    - test_OneZoneWthCtmStack.prj
    - valThreeZonesWthCtm.prj

* test_OneFloorWpcAddMf.py

    - test_OneFloorWpcAddMf-UseApi.prj

# Documentation

The *docs* folder in the source distribution file (e.g., *contamxpy-#.#.#.zip*) contains a PDF with detailed documentation of the API.

# Developer Notes

These bindings were developed using the **C Foreign Function Interface (CFFI)**. CFFI utilizes C header files that define the `contamx-lib` API. `contamx-lib.lib` is a statically linked build of ContamX with an API, i.e., `contamx-lib`. A dynamic Python module (.pyd) is built that incorporates the static build.  

**NIST Developer NOTE:** The static build of `contamx-lib.lib` must include the following dependencies: `WSock32.lib`, `WS2_32.lib`, and `user32.lib`.  

## Steps to Develop Python Bindings

### 1. Create directory for *contamxpy*  
- Either clone the repo (NIST developers only) OR
- Download the source distribution from https://pypi.org/project/contamxpy/  
#### Source files:  

```
contamxpy\  
|
| setup.py
| setup.cfg
| MANIFEST.in 
| LICENSE.txt
| README.md
| contamxpy_build.py
| contamxpy.py
| contamx-lib.lib
|
├── include\
|   └── contam-x-cosim.h
|       string-len-max.h
|       types.h
|
└── demo_files\
    └── cxResults.py
        test_cxcffi.py
        test_OneZoneWthCtm.prj/.wth/.ctm
        test_OneZoneWthCtmStack.prj/.wth/.ctm
        valThreeZonesWth.prj/.wth/.ctm
        test_OneFloorWpcAddMf.prj
        test_OneFloor.wpc
        test_OneZoneWthCtm.py
        test_OneZoneWthCtm-UseApi.prj
        test_OneZoneWthCtmStack-UseApi.prj
        test_GetPrjInfo.prj
        test_OneFloorWpcAddMf.py
        test_OneFloorWpcAddMf-UseApi.prj

```
### 2. Create virtual environment
   `python -m venv .venv`  
   
### 3. Activate virtual environment
   + Windows => `.venv\Scripts\activate.bat`
   
### 4. Install required packages:  

   `$ python -m pip install cffi, wheel, numpy`

* *cffi* and *wheel* are required for development
* *cffi* and *numpy* are required to run example driver modules  

### 5. Generate *contamxpy* 

Run the build module.
```
contamxpy_build.py
```   
This should generate *_contamxpy.c*, etc.
```
contamxpy\  
|
├── Release\
|   └── ... *.exp/.lib/.obj
|
└── _contamxpy.c
    _contamxpy.cp310-win_amd64.pyd
```

Most importantly it will generate a .pyd file, e.g., 
`_contamxpy-0.0.3-abi3-cp310-win_amd64.pyd`. This is a dynamic Python module that provides a wrapper to `contamx-lib.lib` and can be imported into driver programs.

### 6. Install the development version locally
```
$(.venv) pip install .
```
### 7. Generate Files for Distribution
Built distribution, i.e., wheel file:
```
$(.venv) python -m setup bdist_wheel
```
Source distribution, i.e., compressed archive (.zip, .gz):
```
$(.venv) python -m setup sdist --format=zip
AND/OR
$(.venv) python -m setup sdist
```

## Development Files  

### cxcffi_build.py

This module is used to produce the dynamic python module using CFFI to wrap the static library, `contamx-lib`.  

```python
from __future__ import annotations

# Using the "out-of-line", "API mode"
from cffi import FFI


CDEF = '''\
    // NOT SHOWN: typedef and function prototypes for contamx-lib.lib
'''

SRC = '''\
    #include "include//contam-x-cosim.h"
'''

ffibuilder = FFI()
ffibuilder.cdef(CDEF)
ffibuilder.set_source(
    "_contamxpy", SRC,
    include_dirs=['.','include'],  # C header files for contam-x-lib
    libraries=['contamx-lib'],     # Library to link with (.lib, .dll)
)

if __name__ == "__main__":
    ffibuilder.compile(verbose=True)
```
### contamxpy
`contamxpy` implements the `cxLib` class that provides the wrapper to `contamx-lib`. This module is imported for use by driver programs listed above. 

NOTE: Code not shown here.

### setup.py  

```python
from __future__ import annotations

import platform
import sys

from setuptools import setup

if platform.python_implementation() == 'CPython':
    try:
        import wheel.bdist_wheel
    except ImportError:
        cmdclass = {}
    else:
        class bdist_wheel(wheel.bdist_wheel.bdist_wheel):
            def finalize_options(self) -> None:
                self.py_limited_api = f'cp3{sys.version_info[1]}'
                super().finalize_options()

        cmdclass = {'bdist_wheel': bdist_wheel}
else:
    cmdclass = {}

setup(
    cffi_modules=['contamxpy_build.py:ffibuilder'], cmdclass=cmdclass
    )
```

### setup.cfg

```ini
[metadata]
name = contamxpy
version = 0.0.5
description = Python wrapper for the CONTAM Simulation Engine, ContamX
long_description = file: README.md
long_description_content_type = text/markdown
author = W. Stuart Dols, Brian Polidoro, NIST
author_email = william.dols@nist.gov
license = Public Domain
license_files = LICENSE.txt
classifiers =
    License :: Public Domain 
    License :: OSI Approved :: BSD License
    Programming Language :: Python :: 3
    Programming Language :: Python :: 3 :: Only
    Programming Language :: Python :: Implementation :: CPython
    Programming Language :: Python :: Implementation :: PyPy
    Topic :: Scientific/Engineering
project_urls=
    Web Page= https://www.nist.gov/el/energy-and-environment-division-73200/nist-multizone-modeling/
    Source  = https://pypi.org/project/contamxpy/
[options]
py_modules = contamxpy
python_requires = >=3.7
install_requires =
    cffi>=1
setup_requires =
    cffi>=1
```

### MANIFEST.in
The manifest file is used to add files to the source builds.  

```
include include\*.h
include contamx-lib.*
include demo_files\*.py
include demo_files\*.prj
include demo_files\*.wth
include demo_files\*.ctm
```

# REFERENCES
1. https://www.youtube.com/watch?v=X5irxO5VCHw
2. https://github.com/asottile/ukkonen
3. https://cffi.readthedocs.io/en/latest/index.html
4. https://docs.python.org/3.10/distutils/index.html
5. https://setuptools.pypa.io/en/latest/setuptools.html
6. https://packaging.python.org/en/latest/tutorials/packaging-projects/

# TODO  
- Test on Linux  
