Start pairing, then briefly press key C on the wireless module (behind the service flap on the column). The luminaire then shows up in Home Assistant.
Commands below go to this head.
Each button changes only that setting. Color temperature only sticks when VTL is off.
Sent as-is after the D2 RORG byte. The first byte holds the head index in the high nibble and the command id in the low nibble.
| Time | Dir | Sender | dBm | Bytes | Decoded |
|---|
The bridge publishes discovery config for every luminaire, and Home Assistant creates the entities from it. Republish if entities are missing.
waldmann-enocean is an independent project and is not affiliated with or endorsed by Waldmann GmbH & Co. KG.