Metadata-Version: 1.0
Name: Bluedesk
Version: 1.8
Summary: CLI tool to control lower energy actuator systems (office desks) through bluetooth.
Home-page: UNKNOWN
Author: Alexandros Fotiadis
Author-email: fotiadis90@gmail.com
License: UNKNOWN
Description: # Bluedesk
        
        Connects to a low energy actuator system via bluetooth and allows remote control via command line or internal managed interface.
        
        ## Supported and Tested Desks
        
        - [Linak Desk 8721 (Module)](https://www.linak.com/products/controls/desk-control-basic-app/) / [IKEA IDÅSEN](https://www.ikea.com/gb/en/p/idasen-desk-sit-stand-brown-beige-s79280917/)
        
        > Other devices may also work.
        
        # Requirements
        
        ## Prepare **bluepy** system dependencies:
        
        The code needs an executable `bluepy-helper` to be compiled from C source. This is done
        automatically if you use the recommended pip installation method (see below). Otherwise,
        you can rebuild it using the Makefile in the `bluepy` directory.
        
        To install the current released version, on most Debian-based systems:
        
            $ sudo apt-get install python-pip libglib2.0-dev
        
        On Fedora do:
        
            $ sudo dnf install python-pip glib2-devel
        
        For Python 3, you may need to use `pip3`:
        
            $ sudo apt-get install python3-pip libglib2.0-dev
        
        
        # Installation
        
            sudo pip install bluedesk
        
        
        
        > To use the command without `sudo` run this command:
        
            sudo setcap 'cap_net_raw,cap_net_admin+eip' /usr/local/lib/(python3.7 OR your version)/dist-packages/bluepy/bluepy-helper
        
        > where python3.7 is relative to your current used version.
        
        
        # CLI Usage
        
        ## HELP
        
            $ bluedesk -h
        
            usage: bluedesk [-h] {connect} ...
        
            Controls lower energy actuator systems (office desks) via bluetooth.
        
            positional arguments:
            {connect}
        
            optional arguments:
            -h, --help  show this help message and exit
        
        ## Connect
        
            $ bluedesk connect
        
            Scanning ...
            [?] Choice device: Desk 8721 [e4:d1:a7:xx:xx:xx]
            > Desk 8721 [e4:d1:a7:xx:xx:xx]
            None [02:c3:85:xx:xx:xx]
        
            Device: e4:d1:a7:xx:xx:xx connected successfully.
        
        > Note: After the desk is connected, the CLI tool should provide additional actions:
        
            usage: bluedesk [-h] {connect,disconnect,up,down,move} ...
        
            Controls lower energy actuator systems (office desks) via bluetooth.
        
            positional arguments:
            {connect,disconnect,up,down,move}
        
            optional arguments:
            -h, --help            show this help message and exit
        
        ## Move up and down
        
            $ bluedesk up
        
            OR
        
            $ bluedesk down
        
        ## Move to a specific position
        
            $ bluedesk move --to 50
        
        > This command will move the desk to the 50% height 
        
Platform: UNKNOWN
