Metadata-Version: 1.1
Name: IOT_GD
Version: 1.0.3
Summary: IoT. You can read moacon modules (Modbus communication - cubloc.com) and mcp3208 - 8 channel 12Bit ADC from Rpi 3 and others.
Home-page: https://github.com/sergiosanchezs/IOT-GD
Author: Sergio Sanchez, Ruben Morales
Author-email: sergio.sanchezs@ingenieros.com
License: BSD
Description: 
        ====================================
        MOACON MODULES LIBRARY
        ====================================
        #### RS-ADIN4 AND RS-SADIN6 MODULES FROM CUBLOC.COM
        
        IoT. You can read moacon modules (Modbus communication - cubloc.com) and mcp3208 - 8 channel 12Bit ADC from Rpi 3 and others.
        
        You can install this package by typing the following code in terminal in the rapsberry Pi:
        
        	$ sudo pip install IOT_GD
        
        This package include serveral modules:
        Module moacon.py: This module contains the folling functions:
        
        #### OpenSerialMoacon():
        
        This function allows to open a serial port in raspberry pi 3 named 'Serial0'
        and Baud Rate speed at 115200, to communicate well with the 
        In Rpi 3 you have to disable bluetooth device and swippe the serial port. 
        When you execute the following command and you have 'Serial0 -> ttyAMA0'::
        				
        	$ ls -l /dev/
        
        #### CloseSerialMoacon(): 
        
        This function close the serial connection oppened by OpenSerialMoacon().
        
        #### RS_ADIN4(Module Number):
        
        This function read the RS-ADIN4 moacon module from Cubloc.com.
        - Module Number: The number of moacon module from 0 to 9 on the device. 
        With a little modification in hardwrare you could read from 10 to 15.
        
        #### RS_SADIN6(Module Number):
        
        This function read the RS-SADIN6 moacon module from Cubloc.com.
        - Module Number: The number of moacon module from 0 to 9 on the device. 
        With a little modification in hardwrare you could read from 10 to 15.
        
        When data result in each channel is:
        
        - (-1): probably the channel is damaged.
        - (-2): Probably the data received is incomplete.
        - (-3): It tried to read 3 times and it couldn't get an answer from the module. 
        - (-4): Module is Disconnected. Please verify the connection.
        
        
        #### READING EXAMPLE CODE FOR RS_ADIN4. TESTING AND WORKING:
        
        	import serial
        	import time
        	from IOT_GD import moacon
        	ModuleNumber = 1
        	if __name__ == '__main__':
        			if moacon.OpenSerialMoacon() is True:
        					results = moacon.RS_ADIN4(ModuleNumber)
        					# print results
        					print "Module " + str(ModuleNumber)
        					for res in range(0, 4):
        							print "Channel " + str(res+1) + ": " + str(results[res])
        			moacon.CloseSerialMoacon()
        
        #### READING EXAMPLE CODE FOR RS_SADIN6. TESTING AND WORKING:
        
        	import serial
        	import time
        	from IOT_GD import moacon
        	ModuleNumber = 7
        	if __name__ == '__main__':
        			if moacon.OpenSerialMoacon() is True:
        					results = moacon.RS_SADIN6(ModuleNumber)
        					# print results
        					print "Module " + str(ModuleNumber)
        					for res in range(0, 6):
        							print "Channel " + str(res+1) + ": " + str(results[res])
        			moacon.CloseSerialMoacon()
        
        ====================================
        SPI MODULE LIBRARY
        ====================================
        
        #### ADC with MCP3208
        
        This module let you use the chip ADC MCP3208 which have 8 analog channels to use in differents purposes. Per example, You can connect a LM35 sensor to measure and control the temperature in a close place to control. You can use a different many sensor  depending your application. You can measure the voltage, current, humidity and many things more. 
        
        #### *Note: You need to add a voltage divider to measure voltages higher than the Vdd Vref*
        
        This module use the SPI protocol to send to RPI all measured data.
        
        The module use the function **_readadc(n)_**  where n is the ADC channel where the sensor is connected. You can use a cycle "for" from n=0 to n=7 if you have connected eight sensors to chip and you want take every measure of these at the same time.
        
        	import time
        	from IOT_GD import mcp3208
        	if __name__ == "__main__":
        		while True:
        			channels = []
        			for n in range(0, 8):
        				data = mcp3208.readadc(n)
        				channels.insert(n, data)
        			#print channels
        			print "----------------------"
        			for n in range(0, 8):
        				print "channel " + str(n+1) + ": " + str(channels[n])
        			print "",
        			time.sleep(1)
Keywords: IOT_GD moacon ADC modbus rs-485 spi
Platform: UNKNOWN
Classifier: Development Status :: 4 - Beta
Classifier: Intended Audience :: Education
Classifier: Intended Audience :: Developers
Classifier: Topic :: System :: Hardware :: Hardware Drivers
Classifier: License :: OSI Approved :: BSD License
Classifier: Programming Language :: Python :: 2
Classifier: Programming Language :: Python :: 2.6
Classifier: Programming Language :: Python :: 2.7
Classifier: Operating System :: POSIX :: Linux
Classifier: Natural Language :: English
