PW PicoPWM Web 0.0.0-debug
Disconnected

Dashboard

Device information

Product--
Board model--
Serial / UID--
System clock--
Firmware RAM reserved / total--
Firmware version--

Boot configuration

Edit the boot settings, then save and reboot to apply them.

Pin assignment

GPIO assignments reported by the connected board. GPIO numbers are not physical header pin numbers. Signals are 3.3 V only; I2C requires external pull-ups.

Connect a board to read its pin assignment.

Hardware PWM
ChannelGPIO
PIO PWM
ChannelGPIO
Software PWM
ChannelGPIO
Board functions
FunctionGPIO
I2C SDA--
I2C SCL--
Board LED--

Reboot Board?

The board will restart and USB will disconnect. Unsaved settings will not be saved. PWM outputs will be interrupted. The host will reconnect to the selected board after restart.

Save & Reboot?

Saving erases and programs flash. The board stops answering HID, CDC, and I2C for a moment, and software generators and monitors are disturbed. Stop software generators first. The board will restart and USB will disconnect. The host will reconnect to verify the applied settings.

Runtime status

Uptime--
Board temperature--
Service load (Core 0 / Core 1)--

PWM control and monitoring 0–23

Click generator values to edit
Hardware PWM --
Channel (GPIO)FrequencyDuty
PIO PWM --
Channel (GPIO)FrequencyDuty
Software PWM --
Channel (GPIO)FrequencyDuty

Edit channel

Values start from the current realized output, which may differ from the requested frequency due to hardware rounding. Apply changes the live output immediately; no save or reboot.