# Runs the build-bot as a Windows service.
# To use:
# * Install and configure buildbot as per normal (ie, running
#  'setup.py install' from the source directory).
#
# * Configure any number of build-bot directories (slaves or masters), as
#   per the buildbot instructions.  Test these directories normally by
#   using the (possibly modified) "buildbot.bat" file and ensure everything
#   is working as expected.
#
# * Install the buildbot service.  Execute the command:
#   % python buildbot_service.py
#   To see installation options.  You probably want to specify:
#   + --username and --password options to specify the user to run the
#   + --startup auto to have the service start at boot time.
#
#   For example:
#   % python buildbot_service.py --user mark --password secret \
#     --startup auto install
#   Alternatively, you could execute:
#   % python buildbot_service.py install
#   to install the service with default options, then use Control Panel
#   to configure it.
#
# * Start the service specifying the name of all buildbot directories as
#   service args.  This can be done one of 2 ways:
#   - Execute the command:
#     % python buildbot_service.py start "dir_name1" "dir_name2"
#   or:
#   - Start Control Panel->Administrative Tools->Services
#   - Locate the previously installed buildbot service.
#   - Open the "properties" for the service.
#   - Enter the directory names into the "Start Parameters" textbox.  The
#     directory names must be fully qualified, and surrounded in quotes if
#    they include spaces.
#   - Press the "Start"button.
#   Note that the service will automatically use the previously specified
#   directories if no arguments are specified. This means the directories
#   need only be specified when the directories to use have changed (and
#   therefore also the first time buildbot is configured)
#
# * The service should now be running.  You should check the Windows
#   event log.  If all goes well, you should see some information messages
#   telling you the buildbot has successfully started.
#
# * If you change the buildbot configuration, you must restart the service.
#   There is currently no way to ask a running buildbot to reload the
#   config.  You can restart by executing:
#   % python buildbot_service.py restart
#
# Troubleshooting:
# * Check the Windows event log for any errors.
# * Check the "twistd.log" file in your buildbot directories - once each
#   bot has been started it just writes to this log as normal.
# * Try executing:
#   % python buildbot_service.py debug
#   This will execute the buildbot service in "debug" mode, and allow you to
#   see all messages etc generated. If the service works in debug mode but
#   not as a real service, the error probably relates to the environment or
#   permissions of the user configured to run the service (debug mode runs as
#   the currently logged in user, not the service user)
# * Ensure you have the latest pywin32 build available, at least version 206.

# Written by Mark Hammond, 2006.

import sys
import os
import threading

import pywintypes
import winerror
import win32con
import win32api
import win32event
import win32file
import win32pipe
import win32process
import win32security
import win32service
import win32serviceutil
import servicemanager

# Are we running in a py2exe environment?
is_frozen = hasattr(sys, "frozen")

# Taken from the Zope service support - each "child" is run as a sub-process
# (trying to run multiple twisted apps in the same process is likely to screw
# stdout redirection etc).
# Note that unlike the Zope service, we do *not* attempt to detect a failed
# client and perform restarts - buildbot itself does a good job
# at reconnecting, and Windows itself provides restart semantics should
# everything go pear-shaped.

# We execute a new thread that captures the tail of the output from our child
# process. If the child fails, it is written to the event log.
# This process is unconditional, and the output is never written to disk
# (except obviously via the event log entry)
# Size of the blocks we read from the child process's output.
CHILDCAPTURE_BLOCK_SIZE = 80
# The number of BLOCKSIZE blocks we keep as process output.
CHILDCAPTURE_MAX_BLOCKS = 200


class BBService(win32serviceutil.ServiceFramework):
    _svc_name_ = 'BuildBot'
    _svc_display_name_ = _svc_name_
    _svc_description_ = 'Manages local buildbot slaves and masters - ' \
                        'see http://buildbot.sourceforge.net'

    def __init__(self, args):
        win32serviceutil.ServiceFramework.__init__(self, args)

        # Create an event which we will use to wait on. The "service stop"
        # request will set this event.
        # * We must make it inheritable so we can pass it to the child
        #   process via the cmd-line
        # * Must be manual reset so each child process and our service
        #   all get woken from a single set of the event.
        sa = win32security.SECURITY_ATTRIBUTES()
        sa.bInheritHandle = True
        self.hWaitStop = win32event.CreateEvent(sa, True, False, None)

        self.args = args
        self.dirs = None
        self.runner_prefix = None

        # Patch up the service messages file in a frozen exe.
        # (We use the py2exe option that magically bundles the .pyd files
        # into the .zip file - so servicemanager.pyd doesn't exist.)
        if is_frozen and servicemanager.RunningAsService():
            msg_file = os.path.join(os.path.dirname(sys.executable),
                                    "buildbot.msg")
            if os.path.isfile(msg_file):
                servicemanager.Initialize("BuildBot", msg_file)
            else:
                self.warning("Strange - '%s' does not exist" % (msg_file, ))

    def _checkConfig(self):
        # Locate our child process runner (but only when run from source)
        if not is_frozen:
            # Running from source
            python_exe = os.path.join(sys.prefix, "python.exe")
            if not os.path.isfile(python_exe):
                # for ppl who build Python itself from source.
                python_exe = os.path.join(sys.prefix, "PCBuild", "python.exe")
            if not os.path.isfile(python_exe):
                self.error("Can not find python.exe to spawn subprocess")
                return False

            me = __file__
            if me.endswith(".pyc") or me.endswith(".pyo"):
                me = me[:-1]

            self.runner_prefix = '"%s" "%s"' % (python_exe, me)
        else:
            # Running from a py2exe built executable - our child process is
            # us (but with the funky cmdline args!)
            self.runner_prefix = '"' + sys.executable + '"'

        # Now our arg processing - this may be better handled by a
        # twisted/buildbot style config file - but as of time of writing,
        # MarkH is clueless about such things!

        # Note that the "arguments" you type into Control Panel for the
        # service do *not* persist - they apply only when you click "start"
        # on the service. When started by Windows, args are never presented.
        # Thus, it is the responsibility of the service to persist any args.

        # so, when args are presented, we save them as a "custom option". If
        # they are not presented, we load them from the option.
        self.dirs = []
        if len(self.args) > 1:
            dir_string = os.pathsep.join(self.args[1:])
            save_dirs = True
        else:
            dir_string = win32serviceutil.GetServiceCustomOption(self,
                                                            "directories")
            save_dirs = False

        if not dir_string:
            self.error("You must specify the buildbot directories as "
                       "parameters to the service.\nStopping the service.")
            return False

        dirs = dir_string.split(os.pathsep)
        for d in dirs:
            d = os.path.abspath(d)
            sentinal = os.path.join(d, "buildbot.tac")
            if os.path.isfile(sentinal):
                self.dirs.append(d)
            else:
                msg = "Directory '%s' is not a buildbot dir - ignoring" \
                      % (d, )
                self.warning(msg)
        if not self.dirs:
            self.error("No valid buildbot directories were specified.\n"
                       "Stopping the service.")
            return False
        if save_dirs:
            dir_string = os.pathsep.join(self.dirs).encode("mbcs")
            win32serviceutil.SetServiceCustomOption(self, "directories",
                                                    dir_string)
        return True

    def SvcStop(self):
        # Tell the SCM we are starting the stop process.
        self.ReportServiceStatus(win32service.SERVICE_STOP_PENDING)
        # Set the stop event - the main loop takes care of termination.
        win32event.SetEvent(self.hWaitStop)

    # SvcStop only gets triggered when the user explictly stops (or restarts)
    # the service.  To shut the service down cleanly when Windows is shutting
    # down, we also need to hook SvcShutdown.
    SvcShutdown = SvcStop

    def SvcDoRun(self):
        if not self._checkConfig():
            # stopped status set by caller.
            return

        self.logmsg(servicemanager.PYS_SERVICE_STARTED)

        child_infos = []

        for bbdir in self.dirs:
            self.info("Starting BuildBot in directory '%s'" % (bbdir, ))
            hstop = self.hWaitStop

            cmd = '%s --spawn %d start %s' % (self.runner_prefix, hstop, bbdir)
            #print "cmd is", cmd
            h, t, output = self.createProcess(cmd)
            child_infos.append((bbdir, h, t, output))

        while child_infos:
            handles = [self.hWaitStop] + [i[1] for i in child_infos]

            rc = win32event.WaitForMultipleObjects(handles,
                                                   0, # bWaitAll
                                                   win32event.INFINITE)
            if rc == win32event.WAIT_OBJECT_0:
                # user sent a stop service request
                break
            else:
                # A child process died.  For now, just log the output
                # and forget the process.
                index = rc - win32event.WAIT_OBJECT_0 - 1
                bbdir, dead_handle, dead_thread, output_blocks = \
                                                        child_infos[index]
                status = win32process.GetExitCodeProcess(dead_handle)
                output = "".join(output_blocks)
                if not output:
                    output = "The child process generated no output. " \
                             "Please check the twistd.log file in the " \
                             "indicated directory."

                self.warning("BuildBot for directory %r terminated with "
                             "exit code %d.\n%s" % (bbdir, status, output))

                del child_infos[index]

                if not child_infos:
                    self.warning("All BuildBot child processes have "
                                 "terminated.  Service stopping.")

        # Either no child processes left, or stop event set.
        self.ReportServiceStatus(win32service.SERVICE_STOP_PENDING)

        # The child processes should have also seen our stop signal
        # so wait for them to terminate.
        for bbdir, h, t, output in child_infos:
            for i in range(10): # 30 seconds to shutdown...
                self.ReportServiceStatus(win32service.SERVICE_STOP_PENDING)
                rc = win32event.WaitForSingleObject(h, 3000)
                if rc == win32event.WAIT_OBJECT_0:
                    break
            # Process terminated - no need to try harder.
            if rc == win32event.WAIT_OBJECT_0:
                break

            self.ReportServiceStatus(win32service.SERVICE_STOP_PENDING)
            # If necessary, kill it
            if win32process.GetExitCodeProcess(h)==win32con.STILL_ACTIVE:
                self.warning("BuildBot process at %r failed to terminate - "
                             "killing it" % (bbdir, ))
                win32api.TerminateProcess(h, 3)
            self.ReportServiceStatus(win32service.SERVICE_STOP_PENDING)

            # Wait for the redirect thread - it should have died as the remote
            # process terminated.
            # As we are shutting down, we do the join with a little more care,
            # reporting progress as we wait (even though we never will <wink>)
            for i in range(5):
                t.join(1)
                self.ReportServiceStatus(win32service.SERVICE_STOP_PENDING)
                if not t.isAlive():
                    break
            else:
                self.warning("Redirect thread did not stop!")

        # All done.
        self.logmsg(servicemanager.PYS_SERVICE_STOPPED)

    #
    # Error reporting/logging functions.
    #

    def logmsg(self, event):
        # log a service event using servicemanager.LogMsg
        try:
            servicemanager.LogMsg(servicemanager.EVENTLOG_INFORMATION_TYPE,
                                  event,
                                  (self._svc_name_,
                                   " (%s)" % self._svc_display_name_))
        except win32api.error, details:
            # Failed to write a log entry - most likely problem is
            # that the event log is full.  We don't want this to kill us
            try:
                print "FAILED to write INFO event", event, ":", details
            except IOError:
                # No valid stdout!  Ignore it.
                pass

    def _dolog(self, func, msg):
        try:
            func(msg)
        except win32api.error, details:
            # Failed to write a log entry - most likely problem is
            # that the event log is full.  We don't want this to kill us
            try:
                print "FAILED to write event log entry:", details
                print msg
            except IOError:
                pass

    def info(self, s):
        self._dolog(servicemanager.LogInfoMsg, s)

    def warning(self, s):
        self._dolog(servicemanager.LogWarningMsg, s)

    def error(self, s):
        self._dolog(servicemanager.LogErrorMsg, s)

    # Functions that spawn a child process, redirecting any output.
    # Although builtbot itself does this, it is very handy to debug issues
    # such as ImportErrors that happen before buildbot has redirected.

    def createProcess(self, cmd):
        hInputRead, hInputWriteTemp = self.newPipe()
        hOutReadTemp, hOutWrite = self.newPipe()
        pid = win32api.GetCurrentProcess()
        # This one is duplicated as inheritable.
        hErrWrite = win32api.DuplicateHandle(pid, hOutWrite, pid, 0, 1,
                                       win32con.DUPLICATE_SAME_ACCESS)

        # These are non-inheritable duplicates.
        hOutRead = self.dup(hOutReadTemp)
        hInputWrite = self.dup(hInputWriteTemp)
        # dup() closed hOutReadTemp, hInputWriteTemp

        si = win32process.STARTUPINFO()
        si.hStdInput = hInputRead
        si.hStdOutput = hOutWrite
        si.hStdError = hErrWrite
        si.dwFlags = win32process.STARTF_USESTDHANDLES | \
                     win32process.STARTF_USESHOWWINDOW
        si.wShowWindow = win32con.SW_HIDE

        # pass True to allow handles to be inherited.  Inheritance is
        # problematic in general, but should work in the controlled
        # circumstances of a service process.
        create_flags = win32process.CREATE_NEW_CONSOLE
        # info is (hProcess, hThread, pid, tid)
        info = win32process.CreateProcess(None, cmd, None, None, True,
                                          create_flags, None, None, si)
        # (NOTE: these really aren't necessary for Python - they are closed
        # as soon as they are collected)
        hOutWrite.Close()
        hErrWrite.Close()
        hInputRead.Close()
        # We don't use stdin
        hInputWrite.Close()

        # start a thread collecting output
        blocks = []
        t = threading.Thread(target=self.redirectCaptureThread,
                             args = (hOutRead, blocks))
        t.start()
        return info[0], t, blocks

    def redirectCaptureThread(self, handle, captured_blocks):
        # One of these running per child process we are watching.  It
        # handles both stdout and stderr on a single handle. The read data is
        # never referenced until the thread dies - so no need for locks
        # around self.captured_blocks.
        #self.info("Redirect thread starting")
        while 1:
            try:
                ec, data = win32file.ReadFile(handle, CHILDCAPTURE_BLOCK_SIZE)
            except pywintypes.error, err:
                # ERROR_BROKEN_PIPE means the child process closed the
                # handle - ie, it terminated.
                if err[0] != winerror.ERROR_BROKEN_PIPE:
                    self.warning("Error reading output from process: %s" % err)
                break
            captured_blocks.append(data)
            del captured_blocks[CHILDCAPTURE_MAX_BLOCKS:]
        handle.Close()
        #self.info("Redirect capture thread terminating")

    def newPipe(self):
        sa = win32security.SECURITY_ATTRIBUTES()
        sa.bInheritHandle = True
        return win32pipe.CreatePipe(sa, 0)

    def dup(self, pipe):
        # create a duplicate handle that is not inherited, so that
        # it can be closed in the parent.  close the original pipe in
        # the process.
        pid = win32api.GetCurrentProcess()
        dup = win32api.DuplicateHandle(pid, pipe, pid, 0, 0,
                                       win32con.DUPLICATE_SAME_ACCESS)
        pipe.Close()
        return dup


# Service registration and startup


def RegisterWithFirewall(exe_name, description):
    # Register our executable as an exception with Windows Firewall.
    # taken from  http://msdn.microsoft.com/library/default.asp?url=\
    #/library/en-us/ics/ics/wf_adding_an_application.asp
    from win32com.client import Dispatch
    #  Set constants
    NET_FW_PROFILE_DOMAIN = 0
    NET_FW_PROFILE_STANDARD = 1

    # Scope
    NET_FW_SCOPE_ALL = 0

    # IP Version - ANY is the only allowable setting for now
    NET_FW_IP_VERSION_ANY = 2

    fwMgr = Dispatch("HNetCfg.FwMgr")

    # Get the current profile for the local firewall policy.
    profile = fwMgr.LocalPolicy.CurrentProfile

    app = Dispatch("HNetCfg.FwAuthorizedApplication")

    app.ProcessImageFileName = exe_name
    app.Name = description
    app.Scope = NET_FW_SCOPE_ALL
    # Use either Scope or RemoteAddresses, but not both
    #app.RemoteAddresses = "*"
    app.IpVersion = NET_FW_IP_VERSION_ANY
    app.Enabled = True

    # Use this line if you want to add the app, but disabled.
    #app.Enabled = False

    profile.AuthorizedApplications.Add(app)


# A custom install function.


def CustomInstall(opts):
    # Register this process with the Windows Firewaall
    import pythoncom
    try:
        RegisterWithFirewall(sys.executable, "BuildBot")
    except pythoncom.com_error, why:
        print "FAILED to register with the Windows firewall"
        print why


# Magic code to allow shutdown.  Note that this code is executed in
# the *child* process, by way of the service process executing us with
# special cmdline args (which includes the service stop handle!)


def _RunChild(runfn):
    del sys.argv[1] # The --spawn arg.
    # Create a new thread that just waits for the event to be signalled.
    t = threading.Thread(target=_WaitForShutdown,
                         args = (int(sys.argv[1]), )
                         )
    del sys.argv[1] # The stop handle
    # This child process will be sent a console handler notification as
    # users log off, or as the system shuts down.  We want to ignore these
    # signals as the service parent is responsible for our shutdown.

    def ConsoleHandler(what):
        # We can ignore *everything* - ctrl+c will never be sent as this
        # process is never attached to a console the user can press the
        # key in!
        return True
    win32api.SetConsoleCtrlHandler(ConsoleHandler, True)
    t.setDaemon(True) # we don't want to wait for this to stop!
    t.start()
    if hasattr(sys, "frozen"):
        # py2exe sets this env vars that may screw our child process - reset
        del os.environ["PYTHONPATH"]

    # Start the buildbot/buildslave app
    runfn()
    print "Service child process terminating normally."


def _WaitForShutdown(h):
    win32event.WaitForSingleObject(h, win32event.INFINITE)
    print "Shutdown requested"

    from twisted.internet import reactor
    reactor.callLater(0, reactor.stop)

def DetermineRunner(bbdir):
   '''Checks if the given directory is a buildslave or a master and returns the
   appropriate run function.'''
   try:
      import buildslave.scripts.runner
      tacfile = os.path.join(bbdir, 'buildbot.tac')

      if os.path.exists(tacfile):
         with open(tacfile, 'r') as f:
            contents = f.read()
            if 'import BuildSlave' in contents:
               return buildslave.scripts.runner.run

   except ImportError:
      # Use the default
      pass

   import buildbot.scripts.runner
   return buildbot.scripts.runner.run

# This function is also called by the py2exe startup code.


def HandleCommandLine():
    if len(sys.argv)>1 and sys.argv[1] == "--spawn":
        # Special command-line created by the service to execute the
        # child-process.
        # First arg is the handle to wait on
        # Fourth arg is the config directory to use for the buildbot/slave
        _RunChild(DetermineRunner(sys.argv[4]))
    else:
        win32serviceutil.HandleCommandLine(BBService,
                                           customOptionHandler=CustomInstall)


if __name__ == '__main__':
    HandleCommandLine()
