Copyright	(c) 2013-2018 Brendan Hay
License	Mozilla Public License, v. 2.0.
Maintainer	Brendan Hay <brendan.g.hay+amazonka@gmail.com>
Stability	auto-generated
Portability	non-portable (GHC extensions)
Safe Haskell	None
Language	Haskell2010

Network.AWS.Firehose.UpdateDestination

Contents

Creating a Request
Request Lenses
Destructuring the Response
Response Lenses

Description

Updates the specified destination of the specified delivery stream.

Use this operation to change the destination type (for example, to replace the Amazon S3 destination with Amazon Redshift) or change the parameters associated with a destination (for example, to change the bucket name of the Amazon S3 destination). The update might not occur immediately. The target delivery stream remains active while the configurations are updated, so data writes to the delivery stream can continue during this process. The updated configurations are usually effective within a few minutes.

Switching between Amazon ES and other services is not supported. For an Amazon ES destination, you can only update to another Amazon ES destination.

If the destination type is the same, Kinesis Data Firehose merges the configuration parameters specified with the destination configuration that already exists on the delivery stream. If any of the parameters are not specified in the call, the existing values are retained. For example, in the Amazon S3 destination, if EncryptionConfiguration is not specified, then the existing EncryptionConfiguration is maintained on the destination.

If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift, Kinesis Data Firehose does not merge any parameters. In this case, all parameters must be specified.

Kinesis Data Firehose uses CurrentDeliveryStreamVersionId to avoid race conditions and conflicting merges. This is a required field, and the service updates the configuration only if the existing configuration has a version ID that matches. After the update is applied successfully, the version ID is updated, and can be retrieved using DescribeDeliveryStream . Use the new version ID to set CurrentDeliveryStreamVersionId in the next call.

Synopsis

Creating a Request

updateDestination #

Arguments

:: Text	`udDeliveryStreamName`
-> Text	`udCurrentDeliveryStreamVersionId`
-> Text	`udDestinationId`
-> UpdateDestination

Creates a value of UpdateDestination with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

udSplunkDestinationUpdate - Describes an update for a destination in Splunk.
udS3DestinationUpdate - [Deprecated] Describes an update for a destination in Amazon S3.
udRedshiftDestinationUpdate - Describes an update for a destination in Amazon Redshift.
udElasticsearchDestinationUpdate - Describes an update for a destination in Amazon ES.
udExtendedS3DestinationUpdate - Describes an update for a destination in Amazon S3.
udDeliveryStreamName - The name of the delivery stream.
udCurrentDeliveryStreamVersionId - Obtain this value from the VersionId result of DeliveryStreamDescription . This value is required, and helps the service perform conditional operations. For example, if there is an interleaving update and this value is null, then the update destination fails. After the update is successful, the VersionId value is updated. The service then performs a merge of the old configuration with the new configuration.
udDestinationId - The ID of the destination.

data UpdateDestination #

See: updateDestination smart constructor.

Instances

Eq UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods (==) :: UpdateDestination -> UpdateDestination -> Bool # (/=) :: UpdateDestination -> UpdateDestination -> Bool #
Data UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> UpdateDestination -> c UpdateDestination # gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c UpdateDestination # toConstr :: UpdateDestination -> Constr # dataTypeOf :: UpdateDestination -> DataType # dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c UpdateDestination) # dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c UpdateDestination) # gmapT :: (forall b. Data b => b -> b) -> UpdateDestination -> UpdateDestination # gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> UpdateDestination -> r # gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> UpdateDestination -> r # gmapQ :: (forall d. Data d => d -> u) -> UpdateDestination -> [u] # gmapQi :: Int -> (forall d. Data d => d -> u) -> UpdateDestination -> u # gmapM :: Monad m => (forall d. Data d => d -> m d) -> UpdateDestination -> m UpdateDestination # gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> UpdateDestination -> m UpdateDestination # gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> UpdateDestination -> m UpdateDestination #
Show UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods showsPrec :: Int -> UpdateDestination -> ShowS # show :: UpdateDestination -> String # showList :: [UpdateDestination] -> ShowS #
Generic UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Associated Types type Rep UpdateDestination :: * -> * # Methods from :: UpdateDestination -> Rep UpdateDestination x # to :: Rep UpdateDestination x -> UpdateDestination #
Hashable UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods hashWithSalt :: Int -> UpdateDestination -> Int # hash :: UpdateDestination -> Int #
ToJSON UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods toJSON :: UpdateDestination -> Value # toEncoding :: UpdateDestination -> Encoding # toJSONList :: [UpdateDestination] -> Value # toEncodingList :: [UpdateDestination] -> Encoding #
AWSRequest UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Associated Types type Rs UpdateDestination :: * # Methods request :: UpdateDestination -> Request UpdateDestination # response :: (MonadResource m, MonadThrow m) => Logger -> Service -> Proxy UpdateDestination -> ClientResponse -> m (Response UpdateDestination) #
ToHeaders UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods toHeaders :: UpdateDestination -> [Header] #
ToPath UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods toPath :: UpdateDestination -> ByteString #
ToQuery UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods toQuery :: UpdateDestination -> QueryString #
NFData UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods rnf :: UpdateDestination -> () #
type Rep UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination type Rep UpdateDestination = D1 (MetaData "UpdateDestination" "Network.AWS.Firehose.UpdateDestination" "amazonka-kinesis-firehose-1.6.0-AKYSCfStBdQJaPHUMyI6Vv" False) (C1 (MetaCons "UpdateDestination'" PrefixI True) (((S1 (MetaSel (Just "_udSplunkDestinationUpdate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe SplunkDestinationUpdate)) :: S1 (MetaSel (Just "_udS3DestinationUpdate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe S3DestinationUpdate))) :: (S1 (MetaSel (Just "_udRedshiftDestinationUpdate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe RedshiftDestinationUpdate)) :: S1 (MetaSel (Just "_udElasticsearchDestinationUpdate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe ElasticsearchDestinationUpdate)))) :: ((S1 (MetaSel (Just "_udExtendedS3DestinationUpdate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe ExtendedS3DestinationUpdate)) :: S1 (MetaSel (Just "_udDeliveryStreamName") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 Text)) :: (S1 (MetaSel (Just "_udCurrentDeliveryStreamVersionId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 Text) :*: S1 (MetaSel (Just "_udDestinationId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 Text)))))
type Rs UpdateDestination #
Instance details Defined in Network.AWS.Firehose.UpdateDestination type Rs UpdateDestination = UpdateDestinationResponse

Request Lenses

udSplunkDestinationUpdate :: Lens' UpdateDestination (Maybe SplunkDestinationUpdate) #

Describes an update for a destination in Splunk.

udS3DestinationUpdate :: Lens' UpdateDestination (Maybe S3DestinationUpdate) #

Deprecated: Describes an update for a destination in Amazon S3.

udRedshiftDestinationUpdate :: Lens' UpdateDestination (Maybe RedshiftDestinationUpdate) #

Describes an update for a destination in Amazon Redshift.

udElasticsearchDestinationUpdate :: Lens' UpdateDestination (Maybe ElasticsearchDestinationUpdate) #

Describes an update for a destination in Amazon ES.

udExtendedS3DestinationUpdate :: Lens' UpdateDestination (Maybe ExtendedS3DestinationUpdate) #

Describes an update for a destination in Amazon S3.

udDeliveryStreamName :: Lens' UpdateDestination Text #

The name of the delivery stream.

udCurrentDeliveryStreamVersionId :: Lens' UpdateDestination Text #

Obtain this value from the VersionId result of DeliveryStreamDescription . This value is required, and helps the service perform conditional operations. For example, if there is an interleaving update and this value is null, then the update destination fails. After the update is successful, the VersionId value is updated. The service then performs a merge of the old configuration with the new configuration.

udDestinationId :: Lens' UpdateDestination Text #

The ID of the destination.

Destructuring the Response

updateDestinationResponse #

Arguments

:: Int	`udrsResponseStatus`
-> UpdateDestinationResponse

Creates a value of UpdateDestinationResponse with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

udrsResponseStatus - -- | The response status code.

data UpdateDestinationResponse #

See: updateDestinationResponse smart constructor.

Instances

Eq UpdateDestinationResponse #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods (==) :: UpdateDestinationResponse -> UpdateDestinationResponse -> Bool # (/=) :: UpdateDestinationResponse -> UpdateDestinationResponse -> Bool #
Data UpdateDestinationResponse #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> UpdateDestinationResponse -> c UpdateDestinationResponse # gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c UpdateDestinationResponse # toConstr :: UpdateDestinationResponse -> Constr # dataTypeOf :: UpdateDestinationResponse -> DataType # dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c UpdateDestinationResponse) # dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c UpdateDestinationResponse) # gmapT :: (forall b. Data b => b -> b) -> UpdateDestinationResponse -> UpdateDestinationResponse # gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> UpdateDestinationResponse -> r # gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> UpdateDestinationResponse -> r # gmapQ :: (forall d. Data d => d -> u) -> UpdateDestinationResponse -> [u] # gmapQi :: Int -> (forall d. Data d => d -> u) -> UpdateDestinationResponse -> u # gmapM :: Monad m => (forall d. Data d => d -> m d) -> UpdateDestinationResponse -> m UpdateDestinationResponse # gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> UpdateDestinationResponse -> m UpdateDestinationResponse # gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> UpdateDestinationResponse -> m UpdateDestinationResponse #
Read UpdateDestinationResponse #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods readsPrec :: Int -> ReadS UpdateDestinationResponse # readList :: ReadS [UpdateDestinationResponse] # readPrec :: ReadPrec UpdateDestinationResponse # readListPrec :: ReadPrec [UpdateDestinationResponse] #
Show UpdateDestinationResponse #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods showsPrec :: Int -> UpdateDestinationResponse -> ShowS # show :: UpdateDestinationResponse -> String # showList :: [UpdateDestinationResponse] -> ShowS #
Generic UpdateDestinationResponse #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Associated Types type Rep UpdateDestinationResponse :: * -> * # Methods from :: UpdateDestinationResponse -> Rep UpdateDestinationResponse x # to :: Rep UpdateDestinationResponse x -> UpdateDestinationResponse #
NFData UpdateDestinationResponse #
Instance details Defined in Network.AWS.Firehose.UpdateDestination Methods rnf :: UpdateDestinationResponse -> () #
type Rep UpdateDestinationResponse #
Instance details Defined in Network.AWS.Firehose.UpdateDestination type Rep UpdateDestinationResponse = D1 (MetaData "UpdateDestinationResponse" "Network.AWS.Firehose.UpdateDestination" "amazonka-kinesis-firehose-1.6.0-AKYSCfStBdQJaPHUMyI6Vv" True) (C1 (MetaCons "UpdateDestinationResponse'" PrefixI True) (S1 (MetaSel (Just "_udrsResponseStatus") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 Int)))

Response Lenses

udrsResponseStatus :: Lens' UpdateDestinationResponse Int #

- | The response status code.