Copyright	(c) 2013-2018 Brendan Hay
License	Mozilla Public License, v. 2.0.
Maintainer	Brendan Hay <brendan.g.hay+amazonka@gmail.com>
Stability	auto-generated
Portability	non-portable (GHC extensions)
Safe Haskell	None
Language	Haskell2010

Network.AWS.EC2.RevokeSecurityGroupEgress

Contents

Creating a Request
Request Lenses
Destructuring the Response

Description

EC2-VPC only: Removes one or more egress rules from a security group for EC2-VPC. This action doesn't apply to security groups for use in EC2-Classic. To remove a rule, the values that you specify (for example, ports) must match the existing rule's values exactly.

Each rule consists of the protocol and the IPv4 or IPv6 CIDR range or source security group. For the TCP and UDP protocols, you must also specify the destination port or range of ports. For the ICMP protocol, you must also specify the ICMP type and code. If the security group rule has a description, you do not have to specify the description to revoke the rule.

Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur.

Creating a Request

revokeSecurityGroupEgress #

Arguments

:: Text	`rsgeGroupId`
-> RevokeSecurityGroupEgress

Creates a value of RevokeSecurityGroupEgress with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

rsgeFromPort - Not supported. Use a set of IP permissions to specify the port.
rsgeIPPermissions - One or more sets of IP permissions. You can't specify a destination security group and a CIDR IP address range in the same set of permissions.
rsgeIPProtocol - Not supported. Use a set of IP permissions to specify the protocol name or number.
rsgeToPort - Not supported. Use a set of IP permissions to specify the port.
rsgeCidrIP - Not supported. Use a set of IP permissions to specify the CIDR.
rsgeSourceSecurityGroupOwnerId - Not supported. Use a set of IP permissions to specify a destination security group.
rsgeSourceSecurityGroupName - Not supported. Use a set of IP permissions to specify a destination security group.
rsgeDryRun - Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation . Otherwise, it is UnauthorizedOperation .
rsgeGroupId - The ID of the security group.

data RevokeSecurityGroupEgress #

Contains the parameters for RevokeSecurityGroupEgress.

See: revokeSecurityGroupEgress smart constructor.

Instances

Eq RevokeSecurityGroupEgress #
Methods (==) :: RevokeSecurityGroupEgress -> RevokeSecurityGroupEgress -> Bool # (/=) :: RevokeSecurityGroupEgress -> RevokeSecurityGroupEgress -> Bool #
Data RevokeSecurityGroupEgress #
Methods gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> RevokeSecurityGroupEgress -> c RevokeSecurityGroupEgress # gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c RevokeSecurityGroupEgress # toConstr :: RevokeSecurityGroupEgress -> Constr # dataTypeOf :: RevokeSecurityGroupEgress -> DataType # dataCast1 :: Typeable (* -> ) t => (forall d. Data d => c (t d)) -> Maybe (c RevokeSecurityGroupEgress) # dataCast2 :: Typeable ( -> * -> *) t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c RevokeSecurityGroupEgress) # gmapT :: (forall b. Data b => b -> b) -> RevokeSecurityGroupEgress -> RevokeSecurityGroupEgress # gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> RevokeSecurityGroupEgress -> r # gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> RevokeSecurityGroupEgress -> r # gmapQ :: (forall d. Data d => d -> u) -> RevokeSecurityGroupEgress -> [u] # gmapQi :: Int -> (forall d. Data d => d -> u) -> RevokeSecurityGroupEgress -> u # gmapM :: Monad m => (forall d. Data d => d -> m d) -> RevokeSecurityGroupEgress -> m RevokeSecurityGroupEgress # gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> RevokeSecurityGroupEgress -> m RevokeSecurityGroupEgress # gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> RevokeSecurityGroupEgress -> m RevokeSecurityGroupEgress #
Read RevokeSecurityGroupEgress #
Methods readsPrec :: Int -> ReadS RevokeSecurityGroupEgress # readList :: ReadS [RevokeSecurityGroupEgress] # readPrec :: ReadPrec RevokeSecurityGroupEgress # readListPrec :: ReadPrec [RevokeSecurityGroupEgress] #
Show RevokeSecurityGroupEgress #
Methods showsPrec :: Int -> RevokeSecurityGroupEgress -> ShowS # show :: RevokeSecurityGroupEgress -> String # showList :: [RevokeSecurityGroupEgress] -> ShowS #
Generic RevokeSecurityGroupEgress #
Associated Types type Rep RevokeSecurityGroupEgress :: * -> * # Methods from :: RevokeSecurityGroupEgress -> Rep RevokeSecurityGroupEgress x # to :: Rep RevokeSecurityGroupEgress x -> RevokeSecurityGroupEgress #
Hashable RevokeSecurityGroupEgress #
Methods hashWithSalt :: Int -> RevokeSecurityGroupEgress -> Int # hash :: RevokeSecurityGroupEgress -> Int #
NFData RevokeSecurityGroupEgress #
Methods rnf :: RevokeSecurityGroupEgress -> () #
AWSRequest RevokeSecurityGroupEgress #
Associated Types type Rs RevokeSecurityGroupEgress :: * # Methods request :: RevokeSecurityGroupEgress -> Request RevokeSecurityGroupEgress # response :: (MonadResource m, MonadThrow m) => Logger -> Service -> Proxy * RevokeSecurityGroupEgress -> ClientResponse -> m (Response RevokeSecurityGroupEgress) #
ToHeaders RevokeSecurityGroupEgress #
Methods toHeaders :: RevokeSecurityGroupEgress -> [Header] #
ToPath RevokeSecurityGroupEgress #
Methods toPath :: RevokeSecurityGroupEgress -> ByteString #
ToQuery RevokeSecurityGroupEgress #
Methods toQuery :: RevokeSecurityGroupEgress -> QueryString #
type Rep RevokeSecurityGroupEgress #
type Rep RevokeSecurityGroupEgress = D1 * (MetaData "RevokeSecurityGroupEgress" "Network.AWS.EC2.RevokeSecurityGroupEgress" "amazonka-ec2-1.6.0-Dm9BQRbqSOK72xbfLZMG4m" False) (C1 * (MetaCons "RevokeSecurityGroupEgress'" PrefixI True) ((::) ((::) ((::) (S1 * (MetaSel (Just Symbol "_rsgeFromPort") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe Int))) (S1 * (MetaSel (Just Symbol "_rsgeIPPermissions") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe [IPPermission])))) ((::) (S1 * (MetaSel (Just Symbol "_rsgeIPProtocol") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe Text))) (S1 * (MetaSel (Just Symbol "_rsgeToPort") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe Int))))) ((::) ((::) (S1 * (MetaSel (Just Symbol "_rsgeCidrIP") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe Text))) (S1 * (MetaSel (Just Symbol "_rsgeSourceSecurityGroupOwnerId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe Text)))) ((::) (S1 * (MetaSel (Just Symbol "_rsgeSourceSecurityGroupName") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe Text))) ((::) (S1 * (MetaSel (Just Symbol "_rsgeDryRun") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe Bool))) (S1 * (MetaSel (Just Symbol "_rsgeGroupId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * Text)))))))
type Rs RevokeSecurityGroupEgress #
type Rs RevokeSecurityGroupEgress = RevokeSecurityGroupEgressResponse

Request Lenses

rsgeFromPort :: Lens' RevokeSecurityGroupEgress (Maybe Int) #

Not supported. Use a set of IP permissions to specify the port.

rsgeIPPermissions :: Lens' RevokeSecurityGroupEgress [IPPermission] #

One or more sets of IP permissions. You can't specify a destination security group and a CIDR IP address range in the same set of permissions.

rsgeIPProtocol :: Lens' RevokeSecurityGroupEgress (Maybe Text) #

Not supported. Use a set of IP permissions to specify the protocol name or number.

rsgeToPort :: Lens' RevokeSecurityGroupEgress (Maybe Int) #

Not supported. Use a set of IP permissions to specify the port.

rsgeCidrIP :: Lens' RevokeSecurityGroupEgress (Maybe Text) #

Not supported. Use a set of IP permissions to specify the CIDR.

rsgeSourceSecurityGroupOwnerId :: Lens' RevokeSecurityGroupEgress (Maybe Text) #

Not supported. Use a set of IP permissions to specify a destination security group.

rsgeSourceSecurityGroupName :: Lens' RevokeSecurityGroupEgress (Maybe Text) #

Not supported. Use a set of IP permissions to specify a destination security group.

rsgeDryRun :: Lens' RevokeSecurityGroupEgress (Maybe Bool) #

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation . Otherwise, it is UnauthorizedOperation .

rsgeGroupId :: Lens' RevokeSecurityGroupEgress Text #

The ID of the security group.

Destructuring the Response

revokeSecurityGroupEgressResponse :: RevokeSecurityGroupEgressResponse #

Creates a value of RevokeSecurityGroupEgressResponse with the minimum fields required to make a request.

data RevokeSecurityGroupEgressResponse #

See: revokeSecurityGroupEgressResponse smart constructor.

Instances

Eq RevokeSecurityGroupEgressResponse #
Methods (==) :: RevokeSecurityGroupEgressResponse -> RevokeSecurityGroupEgressResponse -> Bool # (/=) :: RevokeSecurityGroupEgressResponse -> RevokeSecurityGroupEgressResponse -> Bool #
Data RevokeSecurityGroupEgressResponse #
Methods gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> RevokeSecurityGroupEgressResponse -> c RevokeSecurityGroupEgressResponse # gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c RevokeSecurityGroupEgressResponse # toConstr :: RevokeSecurityGroupEgressResponse -> Constr # dataTypeOf :: RevokeSecurityGroupEgressResponse -> DataType # dataCast1 :: Typeable (* -> ) t => (forall d. Data d => c (t d)) -> Maybe (c RevokeSecurityGroupEgressResponse) # dataCast2 :: Typeable ( -> * -> *) t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c RevokeSecurityGroupEgressResponse) # gmapT :: (forall b. Data b => b -> b) -> RevokeSecurityGroupEgressResponse -> RevokeSecurityGroupEgressResponse # gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> RevokeSecurityGroupEgressResponse -> r # gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> RevokeSecurityGroupEgressResponse -> r # gmapQ :: (forall d. Data d => d -> u) -> RevokeSecurityGroupEgressResponse -> [u] # gmapQi :: Int -> (forall d. Data d => d -> u) -> RevokeSecurityGroupEgressResponse -> u # gmapM :: Monad m => (forall d. Data d => d -> m d) -> RevokeSecurityGroupEgressResponse -> m RevokeSecurityGroupEgressResponse # gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> RevokeSecurityGroupEgressResponse -> m RevokeSecurityGroupEgressResponse # gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> RevokeSecurityGroupEgressResponse -> m RevokeSecurityGroupEgressResponse #
Read RevokeSecurityGroupEgressResponse #
Methods readsPrec :: Int -> ReadS RevokeSecurityGroupEgressResponse # readList :: ReadS [RevokeSecurityGroupEgressResponse] # readPrec :: ReadPrec RevokeSecurityGroupEgressResponse # readListPrec :: ReadPrec [RevokeSecurityGroupEgressResponse] #
Show RevokeSecurityGroupEgressResponse #
Methods showsPrec :: Int -> RevokeSecurityGroupEgressResponse -> ShowS # show :: RevokeSecurityGroupEgressResponse -> String # showList :: [RevokeSecurityGroupEgressResponse] -> ShowS #
Generic RevokeSecurityGroupEgressResponse #
Associated Types type Rep RevokeSecurityGroupEgressResponse :: * -> * # Methods from :: RevokeSecurityGroupEgressResponse -> Rep RevokeSecurityGroupEgressResponse x # to :: Rep RevokeSecurityGroupEgressResponse x -> RevokeSecurityGroupEgressResponse #
NFData RevokeSecurityGroupEgressResponse #
Methods rnf :: RevokeSecurityGroupEgressResponse -> () #
type Rep RevokeSecurityGroupEgressResponse #
type Rep RevokeSecurityGroupEgressResponse = D1 * (MetaData "RevokeSecurityGroupEgressResponse" "Network.AWS.EC2.RevokeSecurityGroupEgress" "amazonka-ec2-1.6.0-Dm9BQRbqSOK72xbfLZMG4m" False) (C1 * (MetaCons "RevokeSecurityGroupEgressResponse'" PrefixI False) (U1 *))