<?xml version="1.0"?>
<!-- 777 tutorial, (c) 2011 Thorsten Brehm -->

<PropertyList>

	<name>Checklist: Pushback/Startup</name>
	<description>
You've prepared your cockpit. Now it's time to start the engines and leave the parking position.

Are you ready to take controls?
	</description>

	<audio-dir>Aircraft/777/Tutorials</audio-dir>

	<init>
		<set>
			<property>controls/electric/battery-switch</property>
			<value>1</value>
		</set>
		<set>
			<property>/controls/flight/flaps</property>
			<value>0.0</value>
		</set>
		<set>
			<property>/controls/APU/off-start-run</property>
			<value>1</value>
		</set>
		<set>
			<property>/controls/APU/apu_status</property>
			<value>3</value>
		</set>
		<set>
			<property>/controls/electric/APU-generator</property>
			<value>1</value>
		</set>
		<set>
			<property>controls/electric/engine[0]/bus-tie</property>
			<value>1</value>
		</set>
		<set>
			<property>controls/electric/engine[1]/bus-tie</property>
			<value>1</value>
		</set>
		<set>
			<property>controls/engines/engine[0]/cutoff</property>
			<value>1</value>
		</set>
		<set>
			<property>controls/engines/engine[1]/cutoff</property>
			<value>1</value>
		</set>
		<set>
			<property>controls/electric/engine/generator</property>
			<value>0</value>
		</set>
		<set>
			<property>controls/electric/engine[1]/generator</property>
			<value>0</value>
		</set>
		<set>
			<property>/sim/model/armrest</property>
			<value>1</value>
		</set>
	</init>

	<step>
		<message>Ok, I'll read the engine start-up checklist...</message>
	</step>

	<step>
		<message>Check: left side, aircraft and engine CLEAR</message>
		<view>
			<heading-offset-deg>134.1</heading-offset-deg>
			<pitch-offset-deg>-19.4</pitch-offset-deg>
			<roll-offset-deg>0.0</roll-offset-deg>
			<x-offset-m>-1.4</x-offset-m>
			<y-offset-m>0.9</y-offset-m>
			<z-offset-m>-28.0381</z-offset-m>
		</view>
	</step>

	<step>
		<message>Check: right side, aircraft and engine CLEAR. That's my side: CLEAR, check.</message>
		<view>
			<heading-offset-deg>360.0</heading-offset-deg>
			<pitch-offset-deg>0</pitch-offset-deg>
			<roll-offset-deg>0.0</roll-offset-deg>
			<x-offset-m>-0.6</x-offset-m>
			<y-offset-m>0.8</y-offset-m>
			<z-offset-m>-28.0381</z-offset-m>
		</view>
	</step>

	<step>
		<message>Check: parking-brake SET</message>
		<marker>
			<x-m>-1.3258</x-m>
			<y-m>-0.1842</y-m>
			<z-m>0.0683</z-m>
			<scale>3.0000</scale>
		</marker>
		<exit>
			<condition>
				<property>/controls/gear/brake-parking</property>
			</condition>
		</exit>
		<view>
			<heading-offset-deg>3.8</heading-offset-deg>
			<pitch-offset-deg>-57.8</pitch-offset-deg>
			<roll-offset-deg>0.0</roll-offset-deg>
			<x-offset-m>-0.3</x-offset-m>
			<y-offset-m>0.7</y-offset-m>
			<z-offset-m>-28.0381</z-offset-m>
		</view>
	</step>

	<step>
		<message>Check: both throttle-levers IDLE</message>
		<marker>
			<x-m>-1.3258</x-m>
			<y-m>0.0400</y-m>
			<z-m>0.1942</z-m>
			<scale>9.0000</scale>
		</marker>
		<exit>
			<condition>
				<and>
					<less-than>
						<property>controls/engines/engine[0]/throttle-lever</property>
						<value>0.1</value>
					</less-than>
					<less-than>
						<property>controls/engines/engine[1]/throttle-lever</property>
						<value>0.1</value>
					</less-than>
				</and>
			</condition>
		</exit>
		<view>
			<heading-offset-deg>312.0</heading-offset-deg>
			<pitch-offset-deg>-29.6</pitch-offset-deg>
			<roll-offset-deg>0.0</roll-offset-deg>
			<x-offset-m>-0.6</x-offset-m>
			<y-offset-m>0.8</y-offset-m>
			<z-offset-m>-28.0381</z-offset-m>
		</view>
	</step>
	
	<step>
		<message>Check: left/right/center fuel pumps ON (6 switches)</message>
		<exit>
			<condition>
				<and>
					<property>controls/fuel/tank/boost-pump</property>
					<property>controls/fuel/tank/boost-pump[1]</property>
					<property>controls/fuel/tank[1]/boost-pump</property>
					<property>controls/fuel/tank[1]/boost-pump[1]</property>
					<property>controls/fuel/tank[2]/boost-pump</property>
					<property>controls/fuel/tank[2]/boost-pump[1]</property>
				</and>
			</condition>
		</exit>
		<marker>
			<x-m>-1.2792</x-m>
			<y-m>0.0908</y-m>
			<z-m>1.1758</z-m>
			<scale>7.4000</scale>
		</marker>
		<view>
			<heading-offset-deg>314.2</heading-offset-deg>
			<pitch-offset-deg>63.1</pitch-offset-deg>
			<roll-offset-deg>0.0</roll-offset-deg>
			<x-offset-m>-0.1</x-offset-m>
			<y-offset-m>0.6</y-offset-m>
			<z-offset-m>-28.0381</z-offset-m>
		</view>
	</step>

	<step>
		<message>Set #1(left)Engine start knob to START</message>
		<exit>
			<condition>
				<equals>
					<property>controls/engines/autostart-knob[0]</property>
					<value>-1</value>
				</equals>
			</condition>
		</exit>
		<view>
			<heading-offset-deg>355.3</heading-offset-deg>
			<pitch-offset-deg>83.4</pitch-offset-deg>
			<roll-offset-deg>0.0</roll-offset-deg>
			<x-offset-m>-0.0</x-offset-m>
			<y-offset-m>0.7</y-offset-m>
			<z-offset-m>-28.0381</z-offset-m>
			<field-of-view>65.5</field-of-view>
		</view>
		<marker>
			<x-m>-1.0817</x-m>
			<y-m>0.0383</y-m>
			<z-m>1.2945</z-m>
			<scale>2.6500</scale>
		</marker>
	</step>

	<step>
		<message>Check: #1(left) engine CUTOFF switches RUN</message>
		<marker>
			<x-m>-1.2892</x-m>
			<y-m>0.0417</y-m>
			<z-m>0.0933</z-m>
			<scale>5.0000</scale>
		</marker>
		<exit>
			<condition>
				<not>
					<property>controls/engines/engine[0]/cutoff</property>
				</not>
			</condition>
		</exit>
		<view>
			<heading-offset-deg>312.0</heading-offset-deg>
			<pitch-offset-deg>-29.6</pitch-offset-deg>
			<roll-offset-deg>0.0</roll-offset-deg>
			<x-offset-m>-0.6</x-offset-m>
			<y-offset-m>0.8</y-offset-m>
			<z-offset-m>-28.0381</z-offset-m>
		</view>
	</step>

	<step>
		<message>Set #2(right)Engine start knob to START</message>
		<exit>
			<condition>
				<equals>
					<property>controls/engines/autostart-knob[1]</property>
					<value>-1</value>
				</equals>
			</condition>
		</exit>
		<view>
			<heading-offset-deg>355.3</heading-offset-deg>
			<pitch-offset-deg>83.4</pitch-offset-deg>
			<roll-offset-deg>0.0</roll-offset-deg>
			<x-offset-m>-0.0</x-offset-m>
			<y-offset-m>0.7</y-offset-m>
			<z-offset-m>-28.0381</z-offset-m>
			<field-of-view>65.5</field-of-view>
		</view>
		<marker>
			<x-m>-1.0817</x-m>
			<y-m>0.1353</y-m>
			<z-m>1.2945</z-m>
			<scale>2.6500</scale>
		</marker>
	</step>

	<step>
		<message>Check: #2(right) engine CUTOFF switches RUN</message>
		<marker>
			<x-m>-1.2892</x-m>
			<y-m>0.0417</y-m>
			<z-m>0.0933</z-m>
			<scale>5.0000</scale>
		</marker>
		<exit>
			<condition>
				<not>
					<property>controls/engines/engine[1]/cutoff</property>
				</not>
			</condition>
		</exit>
		<view>
			<heading-offset-deg>312.0</heading-offset-deg>
			<pitch-offset-deg>-29.6</pitch-offset-deg>
			<roll-offset-deg>0.0</roll-offset-deg>
			<x-offset-m>-0.6</x-offset-m>
			<y-offset-m>0.8</y-offset-m>
			<z-offset-m>-28.0381</z-offset-m>
		</view>
	</step>

	<step>
		<message>Phew! Nice work so far!</message>
		<view>
			<heading-offset-deg>321.6</heading-offset-deg>
			<pitch-offset-deg>-15.2</pitch-offset-deg>
			<roll-offset-deg>0.0</roll-offset-deg>
			<x-offset-m>-0.6</x-offset-m>
			<y-offset-m>0.7</y-offset-m>
			<z-offset-m>-28.0381</z-offset-m>
			<field-of-view>32.7</field-of-view>
		</view>
		<marker>
			<x-m>-1.8192</x-m>
			<y-m>-0.0458</y-m>
			<z-m>0.4291</z-m>
			<scale>5.6667</scale>
		</marker>
	</step>

	<step>
		<message>Wait for power generator cross-feeds ON</message>
		<exit>
			<condition>
				<and>
					<property>controls/electric/engine/generator</property>
					<property>controls/electric/engine[1]/generator</property>
				</and>
			</condition>
		</exit>
		<marker>
			<x-m>-1.3217</x-m>
			<y-m>-0.2950</y-m>
			<z-m>1.2075</z-m>
			<scale>7.0000</scale>
		</marker>
		<view>
			<heading-offset-deg>301.3</heading-offset-deg>
			<pitch-offset-deg>50.7</pitch-offset-deg>
			<roll-offset-deg>0.0</roll-offset-deg>
			<x-offset-m>-0.6</x-offset-m>
			<y-offset-m>0.8</y-offset-m>
			<z-offset-m>-28.0381</z-offset-m>
		</view>
	</step>

	<step>
		<message>Check: auxiliary power unit (APU) OFF (main engines providing power now)</message>
		<exit>
			<condition>
				<not>
					<property>/controls/electric/APU-generator</property>
				</not>
			</condition>
		</exit>
		<marker>
			<x-m>-1.1353</x-m>
			<y-m>-0.2467</y-m>
			<z-m>1.2275</z-m>
			<scale>3.0000</scale>
		</marker>
	</step>

	<end>
		<message>Use "pushback" dialog to reverse your aircraft from the parking positon. Taxi to the runway. Select "Takeoff" tutorial.</message>
	</end>

</PropertyList>
