HPE ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 7 Server kmod-hpsa-3.4.16-148.rhel7.x86_64.rpm Storage 儲存裝置 Server 伺服器 Driver - Storage Controller 驅動程式 ─ 儲存裝置控制器 美式英文 Login as the system administrator (root), download the RPM to a directory on
your hard drive and change to that directory.

To install or upgrade the driver type:

 

  • # rpm -Uvh kmod-hpsa-<version>.el7.x86_64.rpm  

 

Setup is now complete. Please REBOOT your computer NOW!!

NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

  • # rpm -e kmod-hpsa-<version>.el7.x86_64.rpm

Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support

 

]]> Login as the system administrator (root), download the RPM to a directory on
your hard drive and change to that directory.

To install or upgrade the driver type:

 

  • # rpm -Uvh kmod-hpsa-<version>.el7.x86_64.rpm  

 

Setup is now complete. Please REBOOT your computer NOW!!

NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

  • # rpm -e kmod-hpsa-<version>.el7.x86_64.rpm

Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support

 

]]> 103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3351 103c 323b 103c 3352 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1928 103c 3239 103c 21BD 103c 3239 103c 21bf 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21c3 103c 3239 103c 21c6 103c 3239 103c 21c7 103c 3239 103c 21c8 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca 103c 3239 103c 21c1 103c 3239 103c 21CD 103c 3239 103c 21ce 103c 3239 103c 21cc kmod-hpsa-3.4.16-148.rhel7u3.x86_64.rpm kmod-hpsa-3.4.16-148.rhel7u1.x86_64.rpm kmod-hpsa-3.4.16-148.rhel7u2.x86_64.rpm kmod-hpsa-3.4.16-148.rhel7u0.x86_64.rpm HPE H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) LSI Logic Corporation LSI Logic Corporation Red Hat Enterprise Linux 7 Server Storage 儲存裝置 Server 伺服器 Driver - Storage Controller 驅動程式 ─ 儲存裝置控制器 美式英文 To install the driver, type the following command:
# rpm -ivh kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm (x.x.x.x-x represents the version number)

To upgrade the driver, type the following command:
# rpm -Uvh kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm (x.x.x.x-x represents the version number)

A REBOOT is required for your computer when the setup is complete.

Note: If HPE System Insight Manager support is required, install the latest ProLiant Support Pack and kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm after the OS has completed its installation process and system has rebooted.

]]> To install the driver, type the following command:
# rpm -ivh kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm (x.x.x.x-x represents the version number)

To upgrade the driver, type the following command:
# rpm -Uvh kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm (x.x.x.x-x represents the version number)

A REBOOT is required for your computer when the setup is complete.

Note: If HPE System Insight Manager support is required, install the latest ProLiant Support Pack and kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm after the OS has completed its installation process and system has rebooted.

]]> 1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 kmod-mpt2sas-15.10.04.00-4.rhel7u0.x86_64.rpm kmod-mpt2sas-15.10.05.00-3.rhel7u3.x86_64.rpm kmod-mpt2sas-15.10.04.00-8.rhel7u2.x86_64.rpm kmod-mpt2sas-15.10.04.00-4.rhel7u1.x86_64.rpm Red Hat Enterprise Linux 7 Server FCoE/FC Driver Kit for HPE QLogic CNAs, HBAs and mezzanine HBAs and CNAs 適用於 HPE QLogic CNA、HBA 及夾層 HBA 與 CNA 的 Red Hat Enterprise Linux 7 Server FCoE/FC 驅動程式套件 Red Hat Enterprise Linux 7 Server FCoE/FC Driver Kit for HPE QLogic CNAs, HBAs and mezzanine HBAs and CNAs 適用於 HPE QLogic CNA、HBA 及夾層 HBA 與 CNA 的 Red Hat Enterprise Linux 7 Server FCoE/FC 驅動程式套件 Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 7 Server ServerOptions ServerOptions Storage 儲存裝置 Networking 網路 Driver - Storage Fibre Channel and Fibre Channel Over Ethernet 驅動程式 - 儲存裝置光纖通道與乙太網路光纖通道 美式英文, 日文 Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

]]> Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

]]> 1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install or upgrade the driver, type the following command at the prompt:
                   
                    # rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

                    Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm

4. When the installation or upgrade is complete, the following message displays:

                    Setup is now complete. Please REBOOT your computer NOW!!

IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                      # rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

]]> 1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install or upgrade the driver, type the following command at the prompt:
                   
                    # rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

                    Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm

4. When the installation or upgrade is complete, the following message displays:

                    Setup is now complete. Please REBOOT your computer NOW!!

IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                      # rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

]]> 1077 2532 1077 015C 1077 2532 1077 015D 1077 8021 103c 3348 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2532 103C 3263 1077 2532 103C 3262 1077 8021 103C 1957 1077 2031 103C 1939 1077 2532 103C 338E 1077 2532 103C 3261 1077 2031 103C 8002 1077 2261 1590 00FA 1077 2261 1590 00F9 1077 2532 1590 00FC kmod-qlgc-qla2xxx-8.07.00.34.07.0_k1-3.rhel7u1.x86_64.rpm kmod-qlgc-qla2xxx-8.07.00.34.07.0_k1-3.rhel7u2.x86_64.rpm kmod-qlgc-qla2xxx-8.07.00.34.07.0_k1-1.rhel7u3.x86_64.rpm HPE Fibre Channel Enablement Kit for Linux - QLogic 適用於 Linux 的 HPE 光纖通道啟用套件 - QLogic HPE Fibre Channel Enablement Kit HPE 光纖通道啟用套件 Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 ServerOptions ServerOptions Storage 儲存裝置 Networking 網路 Software - Storage Fibre Channel HBA 軟體 ─ 儲存裝置光纖通道 HBA 美式英文 There has been a change to the enablement kits. They are now vendor specific kits. It is recommended that you uninstall any previous kits prior to installation of this component.

To uninstall the hp-fc-enablement RPM use the following command:

   # rpm -e hp-fc-enablement-<version>.noarch.rpm

To install the vendor specific enablement RPM use the following command:

  # rpm -ivh HP-CNA_FC-hpqlgc-enablement-<version>.noarch.rpm 

This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:

http://www.hpe.com/storage/spock/

 

]]> 啟用套件有所變更。 它們現為廠商特定套件。 建議您先解除安裝任何先前套件，然後再安裝此元件。

若要解除安裝 hp-fc-enablement RPM，請使用下列命令：

   # rpm -e hp-fc-enablement-<版本>.noarch.rpm

若要安裝廠商特定啟用套件 RPM，請使用下列命令：

  # rpm -ivh HP-CNA_FC-hpqlgc-enablement-<版本>.noarch.rpm 

此版本的啟用套件不像先前版本那樣提供額外的重建 ram 磁碟或設定驅動程式參數的功能。如需如何執行這些功能的指示，請參閱「Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays (適用於 HPE StorageWorks 陣列的原生 Linux 裝置對應程式多路徑)」參考指南的「Additional setup (額外設定)」一節。您可從下列連結取得參考指南：

http://www.hpe.com/storage/spock/

 

]]> 1077 2432 103C 7041 1077 2432 103C 7040 1077 2432 103C 1705 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 338E 1077 8021 103c 3348 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 1077 8021 103C 1957 1077 8020 103C 1957 1077 8022 103C 1957 1077 2031 103C 8002 1077 2261 1590 00FA 1077 2261 1590 00F9 1077 2532 1590 00FC HP-CNA-FC-hpqlgc-Enablement-Kit-6.0.0.0-2.noarch.rpm HPE Fibre Channel Enablement Kit for Red Hat Enterprise Linux 7 Server - Emulex 適用於 Red Hat Enterprise Linux 7 伺服器的 HPE 光纖通道啟用套件 - Emulex HPE Fibre Channel Enablement Kit for Red Hat Enterprise Linux 7 Server - Emulex 適用於 Red Hat Enterprise Linux 7 伺服器的 HPE 光纖通道啟用套件 - Emulex Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 7 Server ServerOptions ServerOptions Storage 儲存裝置 Networking 網路 Software - Storage Fibre Channel HBA 軟體 ─ 儲存裝置光纖通道 HBA 美式英文 There has been a change to the enablement kits in this release.  They are now vendor specific kits.   It is recommended that you uninstall any previous kits prior to installation of this component.

To uninstall the hp-fc-enablement RPM use the following command:

   # rpm -e hp-fc-enablement-<version>.noarch.rpm

To install the hp-fc-enablement RPM use the following command:

   # rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm

This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:
 
               http://www.hpe.com/storage/spock/
 

]]> There has been a change to the enablement kits in this release.  They are now vendor specific kits.   It is recommended that you uninstall any previous kits prior to installation of this component.

To uninstall the hp-fc-enablement RPM use the following command:

   # rpm -e hp-fc-enablement-<version>.noarch.rpm

To install the hp-fc-enablement RPM use the following command:

   # rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm

This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:
 
               http://www.hpe.com/storage/spock/
 

]]> 10DF F100 103C 1719 10DF F100 103C 338F 10DF E200 103C 1956 10DF F100 10DF F100 10DF F100 103C 2238 19A2 0714 103C 3344 10DF 0724 103C 21D4 10DF 0724 1590 8153 10DF F100 103C 3281 10DF F100 103C 3282 10DF E200 103C 17E4 10DF E200 103C 17E5 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 1590 00FB 19A2 0714 103C 337B 19A2 0714 103C 3376 19A2 0714 103C 337C 10DF 0724 103C 220A 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 8144 10DF E200 103C 8001 19A2 0714 103C 3315 10DF E300 1590 0214 10DF E300 1590 0213 10DF E300 1590 0202 10DF E300 1590 0201 HP-CNA-FC-Emulex-Enablement-Kit-11.1.183.22-1.rhel7.x86_64.rpm HP Fibre Channel Enablement Kit for Linux - QLogic BR-Series 適用於 Linux 的 HP 光纖通道啟用套件 - QLogic BR-系列 HP Fibre Channel Enablement Kit HP 光纖通道啟用套件 Hewlett-Packard Development Company, L.P. Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Server ServerOptions ServerOptions Networking 網路 Software - Storage Fibre Channel HBA 軟體 ─ 儲存裝置光纖通道 HBA 美式英文 There has been a change to the enablement kits in this release.  They are now vendor specific kits.   It is recommended that you uninstall any previous kits prior to installation of this component.

To uninstall the hp-fc-enablement RPM use the following command:

   # rpm -e hp-fc-enablement-<version>.noarch.rpm

To install the hp-fc-enablement RPM use the following command:

  # rpm -ivh HP-FC-Brocade-enablement-<version>.<arch>.rpm

This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:
 

http://ww.hp.com/storage/spock/

 

]]> 此版本中的啟用套件有所變更。它們現為廠商特定套件。   建議您先解除安裝任何先前套件，然後再安裝此元件。

若要解除安裝 hp-fc-enablement RPM，請使用下列命令：

   # rpm -e hp-fc-enablement-<版本>.noarch.rpm

若要安裝 hp-fc-enablement RPM，請使用下列命令：

  # rpm -ivh HP-FC-Brocade-enablement-<版本>..rpm

此版本的啟用套件不像先前版本那樣提供額外的重建 ram 磁碟或設定驅動程式參數的功能。如需如何執行這些功能的指示，請參閱「Native Linux Device-Mapper Multipath for HP StorageWorks Arrays (適用於 HP StorageWorks 陣列的原生 Linux 裝置對應程式多路徑)」參考指南的「Additional setup (額外設定)」一節。您可從下列連結取得參考指南：
 

http://ww.hp.com/storage/spock/

 

]]> 1657 0013 1657 0014 1657 0017 1657 0014 1657 0017 103c 1743 1657 0013 103c 1742 1657 0021 103c 1779 HP-FC-Brocade-Enablement-Kit-5.0.0.0-3.x86_64.rpm HPE Emulex Smart SAN Enablement Kit for Linux 適用於 Linux 的 SmartSAN SmartSAN 啟用套件 HPE Emulex Smart SAN Enablement Kit SmartSAN SmartSAN 啟用套件 Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Server Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) ServerOptions ServerOptions Storage 儲存裝置 Networking 網路 Software - Storage Fibre Channel HBA 軟體 ─ 儲存裝置光纖通道 HBA 美式英文 Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. Use the appropriate driver included in the HP Service Pack for ProLiant 2016.04.0, which is available at www.hpe.com/servers/spp/download.

However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.

 

]]> Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. Use the appropriate driver included in the HP Service Pack for ProLiant 2016.04.0, which is available at www.hpe.com/servers/spp/download.

However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.

 

]]> This is a configurable component.  It requires a configuration file in order to enable/disable Smart SAN functionality.  If no configuration is performed, the current Smart SAN status is stated and the execution is complete.  No further action is taken.

For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.

Component execution outside of HPE Service Pack for Proliant:

1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install, type the following command at the prompt:

                    # rpm -ivh hpe-emulex-smartsan-enablement-kit-<version>.noarch.rpm

                    Example: # rpm -ivh hpe-emulex-smartsan-enablement-kit-1.0.0.0-1.noarch.rpm

4. When the installation or upgrade is complete, the following message displays:

                    Installation complete

 

]]> This is a configurable component.  It requires a configuration file in order to enable/disable Smart SAN functionality.  If no configuration is performed, the current Smart SAN status is stated and the execution is complete.  No further action is taken.

For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.

Component execution outside of HPE Service Pack for Proliant:

1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install, type the following command at the prompt:

                    # rpm -ivh hpe-emulex-smartsan-enablement-kit-<version>.noarch.rpm

                    Example: # rpm -ivh hpe-emulex-smartsan-enablement-kit-1.0.0.0-1.noarch.rpm

4. When the installation or upgrade is complete, the following message displays:

                    Installation complete

 

]]> 10DF E200 103C 1956 10DF F100 10DF F100 10DF F100 103C 2238 10DF F100 103C 3281 10DF F100 103C 3282 10DF E200 103C 17E4 10DF E200 103C 17E5 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 1590 00FB hpe-emulex-smartsan-enablement-kit-1.0.0.0-2.noarch.rpm HPE QLogic Smart SAN enablement kit for Linux 適用於 Linux 的 QLogic SmartSAN 啟用套件 HPE QLogic Smart SAN Enablement Kit QLogic SmartSAN 啟用套件 Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 ServerOptions ServerOptions Networking 網路 Storage 儲存裝置 Software - Storage Fibre Channel HBA 軟體 ─ 儲存裝置光纖通道 HBA 美式英文 Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. Use the appropriate driver included in the HP Service Pack for ProLiant 2016.04.0, which is available at www.hpe.com/servers/spp/download.

However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.

 

 

]]> Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. Use the appropriate driver included in the HP Service Pack for ProLiant 2016.04.0, which is available at www.hpe.com/servers/spp/download.

However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.

 

 

]]> This is a configurable component.  It requires a configuration file in order to enable/disable Smart SAN functionality.  If no configuration is performed, the current Smart SAN status is stated and the execution is complete.  No further action is taken.

For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.

Component execution outside of HPE Service Pack for Proliant:

1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install, type the following command at the prompt:

                    # rpm -ivh hpe-qlogic-smartsan-enablement-kit-<version>.noarch.rpm

                    Example: # rpm -ivh hpe-qlogic-smartsan-enablement-kit-3.3-1.noarch.rpm

4. When the installation or upgrade is complete, the following message displays:

                    Installation complete

 

]]> This is a configurable component.  It requires a configuration file in order to enable/disable Smart SAN functionality.  If no configuration is performed, the current Smart SAN status is stated and the execution is complete.  No further action is taken.

For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.

Component execution outside of HPE Service Pack for Proliant:

1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install, type the following command at the prompt:

                    # rpm -ivh hpe-qlogic-smartsan-enablement-kit-<version>.noarch.rpm

                    Example: # rpm -ivh hpe-qlogic-smartsan-enablement-kit-3.3-1.noarch.rpm

4. When the installation or upgrade is complete, the following message displays:

                    Installation complete

 

]]> 1077 2532 103C 3262 1077 2532 103C 3263 1077 2532 1077 015C 1077 2532 1077 015D 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 1077 2261 1590 00FA 1077 2261 1590 00F9 hpe-qlogic-smartsan-enablement-kit-3.3-1.noarch.rpm Fibreutils for HPE Storage Fibre Channel Host Bus Adapters for Linux (x86_64) 適用於 Linux (x86_64) 版 HPE Storage 光纖通道主機匯流排配接卡的 Fibreutil Fibreutils for HPE Storage Fibre Channel Host Bus Adapters (x86_64) 適用於 HPE Storage 光纖通道主機匯流排配接卡的 Fibreutil (x86_64) 版 Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 fibreutils-3.3-1.x86_64.rpm ServerOptions ServerOptions Storage 儲存裝置 Networking 網路 Software - Storage Fibre Channel HBA 軟體 ─ 儲存裝置光纖通道 HBA 美式英文 ]]> ]]> Use rpm -Uvh command to install/upgrade RPM.]]> 使用 rpm -Uvh 命令來安裝/升級 RPM。]]> 10DF F100 103C 1719 10DF F100 103C 338F 10DF E200 103C 1956 1077 2532 103C 338E 1077 2031 103C 1939 1077 2432 103C 1705 1077 2532 103C 3261 10DF F100 10DF F100 10DF F100 103C 2238 1077 2532 1590 00FC 1077 2532 1077 015D 1077 2532 1077 015C 1077 8021 103c 3348 19A2 0714 103C 3344 10DF 0724 103C 21D4 10DF 0724 1590 8153 1657 0017 103c 1743 10DF F100 103C 3281 1077 2532 103C 3262 1657 0013 103c 1742 10DF F100 103C 3282 1077 2532 103C 3263 1077 2432 103C 7040 1077 2432 103C 7041 10DF E200 103C 17E4 10DF E200 103C 17E5 1077 2031 103C 17E7 1077 2031 103C 17E8 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 1590 00FB 1077 2261 1590 00FA 1077 2261 1590 00F9 1077 8021 103C 1957 19A2 0714 103C 337B 19A2 0714 103C 3376 19A2 0714 103C 337C 10DF 0724 103C 220A 10DF 0724 103C 1935 10DF 0724 103C 1934 19A2 0714 103C 3315 10DF 0724 103C 8144 10DF E200 103C 8001 1077 2031 103C 8002 fibreutils-3.3-1.x86_64.rpm HPE ProLiant Agentless Management Service for Red Hat Enterprise Linux 7 Server 適用於 Red Hat Enterprise Linux 7 伺服器的 HPE ProLiant 無代理管理服務 hp-ams hp-ams Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 7 Server Lights Out Lights-Out Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文
  • hp-ams supported on HP ProLiant Gen8 and Gen9 Servers.
  • hp-ams provides information to the HP iLO 4 service providing SNMP support.
  • SNMP PASS-THRU on the HP iLO 4 MUST be disabled, and SNMP should be configured on the HP iLO 4. The HP iLO 4 may need to be reset after changing these settings.
  • Requirements:
    • Minimum HP iLO 4 Firmware Version = 1.05
    • Minimum supported OS Versions = Red Hat Enterprise Linux 5.6, Red Hat Enterprise Linux 6.0, SuSE Linux Enterprise Server 10 SP4, SuSE Linux Enterprise Server 11 SP1
    • ]]>
  • HP ProLiant Gen8 及 Gen9 伺服器支援 hp-ams。
  • hp-ams 可提供 HP iLO 4 服務 (其提供 SNMP 支援) 的相關資訊。
  • 您必須停用 HP iLO 4 上的 SNMP PASS-THRU，且必須在 HP iLO 4 上設定 SNMP。變更這些設定後，可能需要重新啟動 HP iLO 4。
  • 需求：
    • 最低的 HP iLO 4 韌體版本 = 1.05
    • 最低支援的 OS 版本 = Red Hat Enterprise Linux 5.6、Red Hat Enterprise Linux 6.0、SuSE Linux Enterprise Server 10 SP4、SuSE Linux Enterprise Server 11 SP1
    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-ams-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-ams status

    Additional help is available by typing:

          man hp-ams

    ]]>         以系統管理員 (root) 的身分登入，將 RPM 下載至硬碟上的目錄，並變更至該目錄。

    要安裝此套件，請鍵入：

          rpm -ivh hp-ams-<版本>.rpm

    若要確認是否正確載入套件，請鍵入：

          /etc/init.d/hp-ams status

    鍵入以下命令可以取得其他說明：

          man hp-ams

    ]]>         Diagnosing connection issues:

    Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    Verify that HP AMS is operating on the Server:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         診斷連線問題：

    確認 HP iLO 4 正利用已安裝的 net-snmp 公用程式，從 Linux 系統來與 SNMP 通訊：

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    確認 HP AMS 在伺服器上正確運作：

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         hp-ams-2.5.0-1969.33.rhel7.x86_64.rpm     HPE System Health Application and Command Line Utilities for Red Hat Enterprise Linux 7 Server 適用於 Red Hat Enterprise Linux 7 伺服器的 HPE 系統健康狀況應用程式與命令列公用程式 hp-health hp-health Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 7 Server Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文 The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-health, type:

          rpm –qp –requires hp-health-< version >.rpm

    ]]>         The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-health, type:

          rpm –qp –requires hp-health-< version >.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-health-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-health status

    Additional help is available by typing:

          man hp-health

                or

          man hp_mgmt_install

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-health-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-health status

    Additional help is available by typing:

          man hp-health

                or

          man hp_mgmt_install

    ]]>         hp-health-10.50-1826.40.rhel7.x86_64.rpm     HPE SNMP Agents for Red Hat Enterprise Linux 7 Server 適用於 Red Hat Enterprise Linux 7 伺服器 的 HPE SNMP 代理程式 hp-snmp-agents hp-snmp-agents Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 7 Server Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文 The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-snmp-agents type:

             rpm –qp –-requires hp-snmp-agents-<version>.rpm

    ]]>         The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

    To get the list of all dependency files for hp-snmp-agents type:

             rpm –qp –-requires hp-snmp-agents-<version>.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package, type:

             rpm -ivh hp-snmp-agents-<version>.rpm

    To check whether the package is loaded properly type:

             /etc/init.d/hp-snmp-agents status

    Additional help is available by typing:

             man hp-snmp-agents

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package, type:

             rpm -ivh hp-snmp-agents-<version>.rpm

    To check whether the package is loaded properly type:

             /etc/init.d/hp-snmp-agents status

    Additional help is available by typing:

             man hp-snmp-agents

    ]]>         hp-snmp-agents-10.50-2926.49.rhel7.x86_64.rpm     HPE System Management Homepage Templates for Linux 適用於 Linux 的 HPE System Management Homepage (系統管理首頁) 範本 hp-smh-templates hp-smh-templates Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hp-smh-templates-10.1.0-%build.version_subst%.noarch Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文 To get the list of all dependency files for hp-smh-templates type:

    rpm –qp –-requires hp-smh-templates-<version>.rpm

    ]]>         To get the list of all dependency files for hp-smh-templates type:

    rpm –qp –-requires hp-smh-templates-<version>.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

             rpm -ivh hp-smh-templates-<version>.rpm

    To check whether the package is installed type:

             rpm –q hp-smh-templates

    Additional help is available by typing:

             man hp-smh-templates

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

             rpm -ivh hp-smh-templates-<version>.rpm

    To check whether the package is installed type:

             rpm –q hp-smh-templates

    Additional help is available by typing:

             man hp-smh-templates

    ]]>         hp-smh-templates-10.5.0-1462.26.noarch.rpm     HPE System Management Homepage for Linux (AMD64/EM64T) 適用於 Linux (AMD64/EM64T) 的 HPE System Management Homepage HPE System Management Homepage for Linux (AMD64/EM64T) 適用於 Linux (AMD64/EM64T) 的 HPE System Management Homepage Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) Citrix XenServer 5.x SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Workstation (x86-64) Red Hat Enterprise Linux 5 Desktop (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpsmh-7.6.0-11.x86_64.rpm Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文 Before installing the SMH software, the RPM verifies that the required versions of Linux library dependencies are present. If any dependencies are not present, then a list of the missing dependencies is provided. The user must manually install all missing dependencies to satisfy the prerequisites before proceeding with the RPM installation.

    ]]>         Before installing the SMH software, the RPM verifies that the required versions of Linux library dependencies are present. If any dependencies are not present, then a list of the missing dependencies is provided. The user must manually install all missing dependencies to satisfy the prerequisites before proceeding with the RPM installation.

    ]]>
  • Installation: rpm -ivh hpsmh-< version >.x86_64.rpm
  • Upgrade (from lower version to higher version): rpm -Uvh hpsmh-<version>.x86_64.rpm>
  • Reinstallation (of same version): rpm -Uvh hpsmh-<version>.x86_64.rpm
  • Downgrade (from higher version to lower version): User needs to uninstall the higher version (rpm –e hpsmh-<version>) and then install the lower version (rpm -ivh hpsmh-<version>.x86_64.rpm).
    • ]]>
  • Installation: rpm -ivh hpsmh-< version >.x86_64.rpm
  • Upgrade (from lower version to higher version): rpm -Uvh hpsmh-<version>.x86_64.rpm>
  • Reinstallation (of same version): rpm -Uvh hpsmh-<version>.x86_64.rpm
  • Downgrade (from higher version to lower version): User needs to uninstall the higher version (rpm –e hpsmh-<version>) and then install the lower version (rpm -ivh hpsmh-<version>.x86_64.rpm).
    • ]]>         SMH 7.6.0 will be aligned with “Service Pack for ProLiant [SPP] October 2016”.

    ]]>         SMH 7.6.0 will be aligned with “Service Pack for ProLiant [SPP] October 2016”.

    ]]>         As per SMH EOL terms, future patch releases will continue to provide fixes for security vulnerabilities & will not provide support to any new OS or Browser.

    ]]>         As per SMH EOL terms, future patch releases will continue to provide fixes for security vulnerabilities & will not provide support to any new OS or Browser.

    ]]>         hpsmh-7.6.0-11.x86_64.rpm     HPE Smart Storage Administrator (HPE SSA) CLI for Linux 64-bit 適用於 Linux 64 位元的 HPE Smart Storage Administrator (HPE SSA) CLI HPE Smart Storage Administrator (HPE SSA) CLI for Linux 64-bit 適用於 Linux 64 位元的 HPE Smart Storage Administrator (HPE SSA) CLI Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 3 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 8 (AMD64) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 ssacli-2.60-18.0.x86_64.rpm Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文, 德文, 法文, 義大利文, 西班牙文
  • HPE SSA CLI is distributed using Red Hat Package Manager (RPM) packages.
    • If there is an older version of HPE SSA CLI installed on the system (Before version 2.60.18.0), please use "rpm -e hpssacli" to remove it first.
    • If there is an older version of HPE SSA CLI installed on the system (2.60.18.0 and later), please use "rpm -e ssacli" to remove it first.
    • Use "rpm -i " to install the application.
    ]]>
  • HPE SSA CLI is distributed using Red Hat Package Manager (RPM) packages.
    • If there is an older version of HPE SSA CLI installed on the system (Before version 2.60.18.0), please use "rpm -e hpssacli" to remove it first.
    • If there is an older version of HPE SSA CLI installed on the system (2.60.18.0 and later), please use "rpm -e ssacli" to remove it first.
    • Use "rpm -i " to install the application.
    ]]>         ssacli-2.60-18.0.x86_64.rpm     HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI for Linux 64-bit 適用於 Linux 64 位元的 HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI for Linux 64-bit 適用於 Linux 64 位元的 HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 3 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 8 (AMD64) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 ssaducli-2.60-18.0.x86_64.rpm Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文, 德文, 法文, 義大利文, 西班牙文
  • HPE SSADUCLI is distributed using Red Hat Package Manager (RPM) packages.
    • If there is an older version of HPE SSADUCLI installed on the system (Before version 2.60.18.0), please use "rpm -e hpssaducli" to remove it first.
    • If there is an older version of HPE SSADUCLI installed on the system (2.60.18.0 and later), please use "rpm -e ssaducli" to remove it first.
    • Use "rpm -i " to install the application.
    ]]>
  • HPE SSADUCLI is distributed using Red Hat Package Manager (RPM) packages.
    • If there is an older version of HPE SSADUCLI installed on the system (Before version 2.60.18.0), please use "rpm -e hpssaducli" to remove it first.
    • If there is an older version of HPE SSADUCLI installed on the system (2.60.18.0 and later), please use "rpm -e ssaducli" to remove it first.
    • Use "rpm -i " to install the application.
    ]]>         ssaducli-2.60-18.0.x86_64.rpm     Insight Diagnostics Online Edition for Linux (x86-64) 適用於 Linux 的 HP Insight Diagnostics Online Edition (HP Insight 診斷程式線上版) (x86-64) Insight Diagnostics Online Edition for Linux (x86-64) Insight Diagnostics Online Edition for Linux (x86-64) Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpdiags-10.60.2109.linux.x86_64.rpm Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文, 德文, 法文, 義大利文, 西班牙文, 簡體中文 The following component(s) are required for Insight Diagnostics Online Edition for Linux:

    • System Management Homepage, version 7.0.0-12 or higher

    The following component(s) are recommended for Insight Diagnostics Online Edition for Linux to make full use of its capabilities:

    • System Health Application, version 9.0.0 or higher

    You can install them by using the SPP or downloading them individually from HPE Support Center.

    ]]>         The following component(s) are required for Insight Diagnostics Online Edition for Linux:

    • System Management Homepage, version 7.0.0-12 or higher

    The following component(s) are recommended for Insight Diagnostics Online Edition for Linux to make full use of its capabilities:

    • System Health Application, version 9.0.0 or higher

    You can install them by using the SPP or downloading them individually from HPE Support Center.

    ]]>         Login with a privileged acount and download the Insight Diagnostics rpm to a local directory and change to that directory. Enter the following command to install the utility:

    • rpm -Uvh < rpmFilename >

    For example, rpm -Uvh hpdiags-< version >.x86_64.rpm

    The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags

    For other Insight Diagnostics command line options:

    • cd /opt/hp/hpdiags/
      ./hpdiags -?

    Note: Insight Diags can also be installed by using the SPP. See Service Pack for ProLiant Quick Start Guide for more information.

    ]]>         Login with a privileged acount and download the Insight Diagnostics rpm to a local directory and change to that directory. Enter the following command to install the utility:

    • rpm -Uvh < rpmFilename >

    For example, rpm -Uvh hpdiags-< version >.x86_64.rpm

    The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags

    For other Insight Diagnostics command line options:

    • cd /opt/hp/hpdiags/
      ./hpdiags -?

    Note: Insight Diags can also be installed by using the SPP. See Service Pack for ProLiant Quick Start Guide for more information.

    ]]>         hpdiags-10.60.2109-2176.linux.x86_64.rpm