HPE ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) Hewlett Packard Enterprise 惠普企业 Red Hat Enterprise Linux 7 Server kmod-hpsa-3.4.16-148.rhel7.x86_64.rpm Storage 存储设备 Server 服务器 Driver - Storage Controller 驱动程序 - 存储控制器英语（美国） Login as the system administrator (root), download the RPM to a directory on
your hard drive and change to that directory.

To install or upgrade the driver type:

# rpm -Uvh kmod-hpsa-<version>.el7.x86_64.rpm

Setup is now complete. Please REBOOT your computer NOW!!

NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

# rpm -e kmod-hpsa-<version>.el7.x86_64.rpm

Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support

]]> Login as the system administrator (root), download the RPM to a directory on
your hard drive and change to that directory.

To install or upgrade the driver type:

# rpm -Uvh kmod-hpsa-<version>.el7.x86_64.rpm

Setup is now complete. Please REBOOT your computer NOW!!

# rpm -e kmod-hpsa-<version>.el7.x86_64.rpm

Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support

]]> 103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3351 103c 323b 103c 3352 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1928 103c 3239 103c 21BD 103c 3239 103c 21bf 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21c3 103c 3239 103c 21c6 103c 3239 103c 21c7 103c 3239 103c 21c8 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca 103c 3239 103c 21c1 103c 3239 103c 21CD 103c 3239 103c 21ce 103c 3239 103c 21cc kmod-hpsa-3.4.16-148.rhel7u3.x86_64.rpm kmod-hpsa-3.4.16-148.rhel7u1.x86_64.rpm kmod-hpsa-3.4.16-148.rhel7u2.x86_64.rpm kmod-hpsa-3.4.16-148.rhel7u0.x86_64.rpm HPE H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) HPE H2xx SAS/SATA Host Bus Adapter Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T) LSI Logic Corporation LSI Logic Corporation Red Hat Enterprise Linux 7 Server Storage 存储设备 Server 服务器 Driver - Storage Controller 驱动程序 - 存储控制器英语（美国） To install the driver, type the following command:
# rpm -ivh kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm (x.x.x.x-x represents the version number)

To upgrade the driver, type the following command:
# rpm -Uvh kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm (x.x.x.x-x represents the version number)

A REBOOT is required for your computer when the setup is complete.

Note: If HPE System Insight Manager support is required, install the latest ProLiant Support Pack and kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm after the OS has completed its installation process and system has rebooted.

]]> To install the driver, type the following command:
# rpm -ivh kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm (x.x.x.x-x represents the version number)

To upgrade the driver, type the following command:
# rpm -Uvh kmod-mpt2sas-X.X.X.X-X.rhel7xx.x86_64.rpm (x.x.x.x-x represents the version number)

A REBOOT is required for your computer when the setup is complete.

]]> 1000 0087 1590 0044 1000 0087 1590 0042 1000 0087 1590 0043 1000 0087 1590 0041 1000 0070 1590 0046 kmod-mpt2sas-15.10.04.00-4.rhel7u0.x86_64.rpm kmod-mpt2sas-15.10.05.00-3.rhel7u3.x86_64.rpm kmod-mpt2sas-15.10.04.00-8.rhel7u2.x86_64.rpm kmod-mpt2sas-15.10.04.00-4.rhel7u1.x86_64.rpm Red Hat Enterprise Linux 7 Server FCoE/FC Driver Kit for HPE QLogic CNAs, HBAs and mezzanine HBAs and CNAs 用于HPE QLogic CNA、HBA、mezzanine HBA和CNA的Red Hat Enterprise Linux 7 Server FCoE/FC驱动程序套件 Red Hat Enterprise Linux 7 Server FCoE/FC Driver Kit for HPE QLogic CNAs, HBAs and mezzanine HBAs and CNAs 用于HPE QLogic CNA、HBA、mezzanine HBA和CNA的Red Hat Enterprise Linux 7 Server FCoE/FC驱动程序套件 Hewlett Packard Enterprise 惠普企业 Red Hat Enterprise Linux 7 Server ServerOptions 服务器选项 Storage 存储设备 Networking 网络 Driver - Storage Fibre Channel and Fibre Channel Over Ethernet 驱动程序-存储光纤通道和以太网光纤通道英语（美国）, 日语 Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

]]> Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

]]> 1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install or upgrade the driver, type the following command at the prompt:

                    # rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

                    Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm

4. When the installation or upgrade is complete, the following message displays:

                    Setup is now complete. Please REBOOT your computer NOW!!

IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

]]> 1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

]]> 1077 2532 1077 015C 1077 2532 1077 015D 1077 8021 103c 3348 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2532 103C 3263 1077 2532 103C 3262 1077 8021 103C 1957 1077 2031 103C 1939 1077 2532 103C 338E 1077 2532 103C 3261 1077 2031 103C 8002 1077 2261 1590 00FA 1077 2261 1590 00F9 1077 2532 1590 00FC kmod-qlgc-qla2xxx-8.07.00.34.07.0_k1-3.rhel7u1.x86_64.rpm kmod-qlgc-qla2xxx-8.07.00.34.07.0_k1-3.rhel7u2.x86_64.rpm kmod-qlgc-qla2xxx-8.07.00.34.07.0_k1-1.rhel7u3.x86_64.rpm HPE Fibre Channel Enablement Kit for Linux - QLogic Linux 版 HPE 光纤信道启用工具包 - QLogic HPE Fibre Channel Enablement Kit HPE 光纤通道启用套件 Hewlett Packard Enterprise 惠普企业 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 ServerOptions 服务器选项 Storage 存储设备 Networking 网络 Software - Storage Fibre Channel HBA 软件 - 存储光纤通道 HBA 英语（美国） There has been a change to the enablement kits. They are now vendor specific kits. It is recommended that you uninstall any previous kits prior to installation of this component.

To uninstall the hp-fc-enablement RPM use the following command:

# rpm -e hp-fc-enablement-<version>.noarch.rpm

To install the vendor specific enablement RPM use the following command:

# rpm -ivh HP-CNA_FC-hpqlgc-enablement-<version>.noarch.rpm

This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:

http://www.hpe.com/storage/spock/

]]> 启用套件中有一些变化。它们是特定厂商的套件。建议您卸载以前的套件再安装该组件。

如要卸载 hp-fc-enablement RPM，是执行下列命令：

# rpm -e hp-fc-enablement-.noarch.rpm

要安装特定厂商启用 RPM，请使用以下命令：

# rpm -ivh HP-CNA_FC-hpqlgc-enablement-.noarch.rpm

该版启用套件不提供以前的版本中提供的重建 ram 磁盘或设置驱动程序参数的额外功能。请参阅 HPE StorageWorks 阵列 Native Linux Device-Mapper Multipath 参考指南的“额外设置（Additional setup）”部分，了解如何运行这些功能的说明。参考指南可通过下列链接获取：

http://www.hpe.com/storage/spock/

]]> 1077 2432 103C 7041 1077 2432 103C 7040 1077 2432 103C 1705 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 338E 1077 8021 103c 3348 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 1077 8021 103C 1957 1077 8020 103C 1957 1077 8022 103C 1957 1077 2031 103C 8002 1077 2261 1590 00FA 1077 2261 1590 00F9 1077 2532 1590 00FC HP-CNA-FC-hpqlgc-Enablement-Kit-6.0.0.0-2.noarch.rpm HPE Fibre Channel Enablement Kit for Red Hat Enterprise Linux 7 Server - Emulex 用于Red Hat Enterprise Linux 7 Server - Emulex的HPE光纤信道支持套件 HPE Fibre Channel Enablement Kit for Red Hat Enterprise Linux 7 Server - Emulex 用于Red Hat Enterprise Linux 7 Server - Emulex的HPE光纤信道支持套件 Hewlett Packard Enterprise 惠普企业 Red Hat Enterprise Linux 7 Server ServerOptions 服务器选项 Storage 存储设备 Networking 网络 Software - Storage Fibre Channel HBA 软件 - 存储光纤通道 HBA 英语（美国） There has been a change to the enablement kits in this release. They are now vendor specific kits. It is recommended that you uninstall any previous kits prior to installation of this component.

To uninstall the hp-fc-enablement RPM use the following command:

# rpm -e hp-fc-enablement-<version>.noarch.rpm

To install the hp-fc-enablement RPM use the following command:

# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm

This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:

http://www.hpe.com/storage/spock/

]]> There has been a change to the enablement kits in this release. They are now vendor specific kits. It is recommended that you uninstall any previous kits prior to installation of this component.

To uninstall the hp-fc-enablement RPM use the following command:

# rpm -e hp-fc-enablement-<version>.noarch.rpm

To install the hp-fc-enablement RPM use the following command:

]]> 10DF F100 103C 1719 10DF F100 103C 338F 10DF E200 103C 1956 10DF F100 10DF F100 10DF F100 103C 2238 19A2 0714 103C 3344 10DF 0724 103C 21D4 10DF 0724 1590 8153 10DF F100 103C 3281 10DF F100 103C 3282 10DF E200 103C 17E4 10DF E200 103C 17E5 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 1590 00FB 19A2 0714 103C 337B 19A2 0714 103C 3376 19A2 0714 103C 337C 10DF 0724 103C 220A 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 8144 10DF E200 103C 8001 19A2 0714 103C 3315 10DF E300 1590 0214 10DF E300 1590 0213 10DF E300 1590 0202 10DF E300 1590 0201 HP-CNA-FC-Emulex-Enablement-Kit-11.1.183.22-1.rhel7.x86_64.rpm HP Fibre Channel Enablement Kit for Linux - QLogic BR-Series Linux版HP光纤信道启用套件 - QLogic BR系列 HP Fibre Channel Enablement Kit HP 光纤通道启用套件 Hewlett-Packard Development Company, L.P. Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Server ServerOptions 服务器选项 Networking 网络 Software - Storage Fibre Channel HBA 软件 - 存储光纤通道 HBA 英语（美国） There has been a change to the enablement kits in this release. They are now vendor specific kits. It is recommended that you uninstall any previous kits prior to installation of this component.

To uninstall the hp-fc-enablement RPM use the following command:

# rpm -e hp-fc-enablement-<version>.noarch.rpm

To install the hp-fc-enablement RPM use the following command:

# rpm -ivh HP-FC-Brocade-enablement-<version>.<arch>.rpm

This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:

http://ww.hp.com/storage/spock/

]]> 该版的启用套件中有一些变化。它们是特定厂商的套件。建议您卸载以前的套件再安装该组件。

如要卸载 hp-fc-enablement RPM，是执行下列命令：

# rpm -e hp-fc-enablement-.noarch.rpm

要安装 hp-fc-enablement RPM，请使用以下命令：

# rpm -ivh HP-FC-Brocade-enablement-..rpm

该版启用套件不提供以前的版本中提供的重建 ram 磁盘或设置驱动程序参数的额外功能。请参阅 HP StorageWorks 阵列 Native Linux Device-Mapper Multipath 参考指南的“额外设置（Additional setup）”部分，了解如何运行这些功能的说明。参考指南可通过下列链接获取：

http://ww.hp.com/storage/spock/

]]> 1657 0013 1657 0014 1657 0017 1657 0014 1657 0017 103c 1743 1657 0013 103c 1742 1657 0021 103c 1779 HP-FC-Brocade-Enablement-Kit-5.0.0.0-3.x86_64.rpm HPE Emulex Smart SAN Enablement Kit for Linux Linux版SmartSAN SmartSAN支持套件 HPE Emulex Smart SAN Enablement Kit SmartSAN SmartSAN支持套件 Hewlett Packard Enterprise 惠普企业 SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Server Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) ServerOptions 服务器选项 Storage 存储设备 Networking 网络 Software - Storage Fibre Channel HBA 软件 - 存储光纤通道 HBA 英语（美国） Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. Use the appropriate driver included in the HP Service Pack for ProLiant 2016.04.0, which is available at www.hpe.com/servers/spp/download.

However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.

]]> Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.

]]> This is a configurable component. It requires a configuration file in order to enable/disable Smart SAN functionality. If no configuration is performed, the current Smart SAN status is stated and the execution is complete. No further action is taken.

For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.

Component execution outside of HPE Service Pack for Proliant:

1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install, type the following command at the prompt:

# rpm -ivh hpe-emulex-smartsan-enablement-kit-<version>.noarch.rpm

Example: # rpm -ivh hpe-emulex-smartsan-enablement-kit-1.0.0.0-1.noarch.rpm

4. When the installation or upgrade is complete, the following message displays:

Installation complete

For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.

Component execution outside of HPE Service Pack for Proliant:

1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

4. When the installation or upgrade is complete, the following message displays:

Installation complete

]]> 10DF E200 103C 1956 10DF F100 10DF F100 10DF F100 103C 2238 10DF F100 103C 3281 10DF F100 103C 3282 10DF E200 103C 17E4 10DF E200 103C 17E5 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 1590 00FB hpe-emulex-smartsan-enablement-kit-1.0.0.0-2.noarch.rpm HPE QLogic Smart SAN enablement kit for Linux HPE QLogic Smart SAN enablement kit for Linux HPE QLogic Smart SAN Enablement Kit HPE QLogic Smart SAN Enablement Kit Hewlett Packard Enterprise 惠普企业 SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 ServerOptions 服务器选项 Networking 网络 Storage 存储设备 Software - Storage Fibre Channel HBA 软件 - 存储光纤通道 HBA 英语（美国） Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.

]]> Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.

For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.

Component execution outside of HPE Service Pack for Proliant:

1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install, type the following command at the prompt:

# rpm -ivh hpe-qlogic-smartsan-enablement-kit-<version>.noarch.rpm

Example: # rpm -ivh hpe-qlogic-smartsan-enablement-kit-3.3-1.noarch.rpm

4. When the installation or upgrade is complete, the following message displays:

Installation complete

For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.

Component execution outside of HPE Service Pack for Proliant:

1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install, type the following command at the prompt:

# rpm -ivh hpe-qlogic-smartsan-enablement-kit-<version>.noarch.rpm

Example: # rpm -ivh hpe-qlogic-smartsan-enablement-kit-3.3-1.noarch.rpm

4. When the installation or upgrade is complete, the following message displays:

Installation complete

]]> 1077 2532 103C 3262 1077 2532 103C 3263 1077 2532 1077 015C 1077 2532 1077 015D 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 1077 2261 1590 00FA 1077 2261 1590 00F9 hpe-qlogic-smartsan-enablement-kit-3.3-1.noarch.rpm Fibreutils for HPE Storage Fibre Channel Host Bus Adapters for Linux (x86_64) 适用于 HPE Storage Fibre Channel Host Bus Adapters for Linux (x86_64) 的 Fibreutils Fibreutils for HPE Storage Fibre Channel Host Bus Adapters (x86_64) 适用于 HPE Storage Fibre Channel Host Bus Adapters (x86_64) 的 Fibreutils Hewlett Packard Enterprise 惠普企业 Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 fibreutils-3.3-1.x86_64.rpm ServerOptions 服务器选项 Storage 存储设备 Networking 网络 Software - Storage Fibre Channel HBA 软件 - 存储光纤通道 HBA 英语（美国） ]]> ]]> Use rpm -Uvh command to install/upgrade RPM.]]> 使用 rpm-Uvh 命令以安装/升级 RPM。]]> 10DF F100 103C 1719 10DF F100 103C 338F 10DF E200 103C 1956 1077 2532 103C 338E 1077 2031 103C 1939 1077 2432 103C 1705 1077 2532 103C 3261 10DF F100 10DF F100 10DF F100 103C 2238 1077 2532 1590 00FC 1077 2532 1077 015D 1077 2532 1077 015C 1077 8021 103c 3348 19A2 0714 103C 3344 10DF 0724 103C 21D4 10DF 0724 1590 8153 1657 0017 103c 1743 10DF F100 103C 3281 1077 2532 103C 3262 1657 0013 103c 1742 10DF F100 103C 3282 1077 2532 103C 3263 1077 2432 103C 7040 1077 2432 103C 7041 10DF E200 103C 17E4 10DF E200 103C 17E5 1077 2031 103C 17E7 1077 2031 103C 17E8 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 1590 00FB 1077 2261 1590 00FA 1077 2261 1590 00F9 1077 8021 103C 1957 19A2 0714 103C 337B 19A2 0714 103C 3376 19A2 0714 103C 337C 10DF 0724 103C 220A 10DF 0724 103C 1935 10DF 0724 103C 1934 19A2 0714 103C 3315 10DF 0724 103C 8144 10DF E200 103C 8001 1077 2031 103C 8002 fibreutils-3.3-1.x86_64.rpm HPE ProLiant Agentless Management Service for Red Hat Enterprise Linux 7 Server Red Hat Enterprise Linux 7 Server版HPE ProLiant无代理管理服务 hp-ams hp-ams Hewlett Packard Enterprise 惠普企业 Red Hat Enterprise Linux 7 Server Lights Out Lights Out Storage 存储设备 Server 服务器 Software - System Management 软件 - 系统管理英语（美国）

hp-ams supported on HP ProLiant Gen8 and Gen9 Servers.

hp-ams provides information to the HP iLO 4 service providing SNMP support.

SNMP PASS-THRU on the HP iLO 4 MUST be disabled, and SNMP should be configured on the HP iLO 4. The HP iLO 4 may need to be reset after changing these settings.

Requirements:

Minimum HP iLO 4 Firmware Version = 1.05
Minimum supported OS Versions = Red Hat Enterprise Linux 5.6, Red Hat Enterprise Linux 6.0, SuSE Linux Enterprise Server 10 SP4, SuSE Linux Enterprise Server 11 SP1

]]>

HP ProLiant Gen8 和 Gen9 服务器支持 hp-ams。

hp-ams 可为 HP iLO 4 服务提供信息，后者提供 SNMP 支持。

必须在 HP iLO 4 中禁用 SNMP PASS-THRU，但应将 SNMP 配置在 HP iLO 4 中。更改这些设置后，可能需要重置 HP iLO 4。

要求：

HP iLO 4 固件最低版本 = 1.05
所支持的操作系统最低版本 = Red Hat Enterprise Linux 5.6、Red Hat Enterprise Linux 6.0、SuSE Linux Enterprise Server 10 SP4、SuSE Linux Enterprise Server 11 SP1

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:

rpm -ivh hp-ams-<version>.rpm

To check whether the package is loaded properly type:

/etc/init.d/hp-ams status

Additional help is available by typing:

man hp-ams

]]> 以系统管理员 (root) 身份登录，将 RPM 下载到硬盘目录中，并转至该目录。

要安装该软件包，请输入：

rpm -ivh hp-ams-.rpm

要检查是否已正确加载该软件包，请输入：

/etc/init.d/hp-ams status

如欲获得其它帮助，请输入：

man hp-ams

]]> Diagnosing connection issues:

Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:

snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

Verify that HP AMS is operating on the Server:

snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

]]> 诊断连接问题：

确认 HP iLO 4 正在使用安装的 net-snmp 实用程序从 linux 系统与 SNMP 通信：

snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

确认正在服务器上运行 HP AMS：

snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

]]> hp-ams-2.5.0-1969.33.rhel7.x86_64.rpm HPE System Health Application and Command Line Utilities for Red Hat Enterprise Linux 7 Server Red Hat Enterprise Linux 7 Server版HPE System Health应用程序和命令行工具 hp-health hp-health Hewlett Packard Enterprise 惠普企业 Red Hat Enterprise Linux 7 Server Storage 存储设备 Server 服务器 Software - System Management 软件 - 系统管理英语（美国） The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment. The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

To get the list of all dependency files for hp-health, type:

rpm –qp –requires hp-health-< version >.rpm

]]> The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment. The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

To get the list of all dependency files for hp-health, type:

rpm –qp –requires hp-health-< version >.rpm

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:

rpm -ivh hp-health-<version>.rpm

To check whether the package is loaded properly type:

/etc/init.d/hp-health status

Additional help is available by typing:

man hp-health

man hp_mgmt_install

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:

rpm -ivh hp-health-<version>.rpm

To check whether the package is loaded properly type:

/etc/init.d/hp-health status

Additional help is available by typing:

man hp-health

man hp_mgmt_install

]]> hp-health-10.50-1826.40.rhel7.x86_64.rpm HPE SNMP Agents for Red Hat Enterprise Linux 7 Server Red Hat Enterprise Linux 7 Server版HPE SNMP Agents hp-snmp-agents hp-snmp-agents Hewlett Packard Enterprise 惠普企业 Red Hat Enterprise Linux 7 Server Storage 存储设备 Server 服务器 Software - System Management 软件 - 系统管理英语（美国） The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment. The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

To get the list of all dependency files for hp-snmp-agents type:

rpm –qp –-requires hp-snmp-agents-<version>.rpm

To get the list of all dependency files for hp-snmp-agents type:

rpm –qp –-requires hp-snmp-agents-<version>.rpm

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package, type:

rpm -ivh hp-snmp-agents-<version>.rpm

To check whether the package is loaded properly type:

/etc/init.d/hp-snmp-agents status

Additional help is available by typing:

man hp-snmp-agents

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package, type:

rpm -ivh hp-snmp-agents-<version>.rpm

To check whether the package is loaded properly type:

/etc/init.d/hp-snmp-agents status

Additional help is available by typing:

man hp-snmp-agents

]]> hp-snmp-agents-10.50-2926.49.rhel7.x86_64.rpm HPE System Management Homepage Templates for Linux HPE System Management Homepage Templates for Linux hp-smh-templates hp-smh-templates Hewlett Packard Enterprise 惠普企业 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hp-smh-templates-10.1.0-%build.version_subst%.noarch Storage 存储设备 Server 服务器 Software - System Management 软件 - 系统管理英语（美国） To get the list of all dependency files for hp-smh-templates type:

rpm –qp –-requires hp-smh-templates-<version>.rpm

]]> To get the list of all dependency files for hp-smh-templates type:

rpm –qp –-requires hp-smh-templates-<version>.rpm

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:

rpm -ivh hp-smh-templates-<version>.rpm

To check whether the package is installed type:

rpm –q hp-smh-templates

Additional help is available by typing:

man hp-smh-templates

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:

rpm -ivh hp-smh-templates-<version>.rpm

To check whether the package is installed type:

rpm –q hp-smh-templates

Additional help is available by typing:

man hp-smh-templates

]]> hp-smh-templates-10.5.0-1462.26.noarch.rpm HPE System Management Homepage for Linux (AMD64/EM64T) 用于 Linux (AMD64/EM64T) 的 HPE System Management Homepage HPE System Management Homepage for Linux (AMD64/EM64T) 用于 Linux (AMD64/EM64T) 的 HPE System Management Homepage Hewlett Packard Enterprise 惠普企业 Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) Citrix XenServer 5.x SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Workstation (x86-64) Red Hat Enterprise Linux 5 Desktop (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpsmh-7.6.0-11.x86_64.rpm Server 服务器 Software - System Management 软件 - 系统管理英语（美国）, 日语 Before installing the SMH software, the RPM verifies that the required versions of Linux library dependencies are present. If any dependencies are not present, then a list of the missing dependencies is provided. The user must manually install all missing dependencies to satisfy the prerequisites before proceeding with the RPM installation.

]]> Before installing the SMH software, the RPM verifies that the required versions of Linux library dependencies are present. If any dependencies are not present, then a list of the missing dependencies is provided. The user must manually install all missing dependencies to satisfy the prerequisites before proceeding with the RPM installation.

]]>

Installation: rpm -ivh hpsmh-< version >.x86_64.rpm

Upgrade (from lower version to higher version): rpm -Uvh hpsmh-<version>.x86_64.rpm>

Reinstallation (of same version): rpm -Uvh hpsmh-<version>.x86_64.rpm

Downgrade (from higher version to lower version): User needs to uninstall the higher version (rpm –e hpsmh-<version>) and then install the lower version (rpm -ivh hpsmh-<version>.x86_64.rpm).

]]>

Installation: rpm -ivh hpsmh-< version >.x86_64.rpm

Upgrade (from lower version to higher version): rpm -Uvh hpsmh-<version>.x86_64.rpm>

Reinstallation (of same version): rpm -Uvh hpsmh-<version>.x86_64.rpm

Downgrade (from higher version to lower version): User needs to uninstall the higher version (rpm –e hpsmh-<version>) and then install the lower version (rpm -ivh hpsmh-<version>.x86_64.rpm).

]]> SMH 7.6.0 will be aligned with “Service Pack for ProLiant [SPP] October 2016”.

]]> As per SMH EOL terms, future patch releases will continue to provide fixes for security vulnerabilities & will not provide support to any new OS or Browser.

]]> hpsmh-7.6.0-11.x86_64.rpm HPE Smart Storage Administrator (HPE SSA) for Linux 64-bit 适用于 Linux 64 位的 HPE 智能存储管理员（HPE SSA） HPE Smart Storage Administrator (HPE SSA) for Linux 64-bit 适用于 Linux 64 位的 HPE 智能存储管理员（HPE SSA） Hewlett Packard Enterprise 惠普企业 Red Hat Enterprise Linux 3 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 8 (AMD64) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 ssa-2.60-18.0.x86_64.rpm Storage 存储设备 Server 服务器 Software - System Management 软件 - 系统管理英语（美国） The HPE Smart Storage Administrator for Linux requires the HPE System Management Homepage software to be installed on the server. If the HPE System Management Homepage software is not already installed on your server, please download it from HPE.com and install it before installing the HPE Smart Storage Administrator for Linux.

IMPORTANT UPDATE: HPE SSA (GUI) for Linux can now be run without requiring the HPE System Management Homepage. HPE SSA now supports a Local Application Mode for Linux. The HPE System Management Homepage is still supported, but no longer required to run the HPE SSA GUI.

To invoke, enter the following at the command prompt:

ssa -local

The command will start HP SSA in a new Firefox browser window. When the browser window is closed, HP SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.

]]> The HPE Smart Storage Administrator for Linux requires the HPE System Management Homepage software to be installed on the server. If the HPE System Management Homepage software is not already installed on your server, please download it from HPE.com and install it before installing the HPE Smart Storage Administrator for Linux.

To invoke, enter the following at the command prompt:

]]>

HPE SSA is distributed using Red Hat Package Manager (RPM) packages.

If there is an older version of HPE SSA installed on the system (Before version 2.60.18.0), please use "rpm -e hpssa" to remove it first.

If there is an older version of HPE SSA installed on the system (2.60.18.0 and later), please use "rpm -e ssa" to remove it first.

Use "rpm -i < file name >" to install the server.

Please type "man rpm" for other details regarding RPM.

The software resides in /opt/smartstorageadmin/ssa/ssa and the executable name is ssa which is located in /usr/sbin.

For more details refer to the README text file which can be viewed by using the man command: man ssa

]]>

HPE SSA is distributed using Red Hat Package Manager (RPM) packages.

If there is an older version of HPE SSA installed on the system (Before version 2.60.18.0), please use "rpm -e hpssa" to remove it first.

If there is an older version of HPE SSA installed on the system (2.60.18.0 and later), please use "rpm -e ssa" to remove it first.

Use "rpm -i < file name >" to install the server.

Please type "man rpm" for other details regarding RPM.

The software resides in /opt/smartstorageadmin/ssa/ssa and the executable name is ssa which is located in /usr/sbin.

For more details refer to the README text file which can be viewed by using the man command: man ssa

]]> Please make sure the following browser options are enabled:

Automatically load images and other data types.

JAVA script

Style sheets

For support for HPE SSA or Smart Array controllers, please visit Contact HP.

]]> Please make sure the following browser options are enabled:

Automatically load images and other data types.

JAVA script

Style sheets

For support for HPE SSA or Smart Array controllers, please visit Contact HP.

]]> ssa-2.60-18.0.x86_64.rpm HPE Smart Storage Administrator (HPE SSA) CLI for Linux 64-bit 适用于 Linux 64 位的 HPE 智能存储管理员（HPE SSA） CLI HPE Smart Storage Administrator (HPE SSA) CLI for Linux 64-bit 适用于 Linux 64 位的 HPE 智能存储管理员（HPE SSA） CLI Hewlett Packard Enterprise 惠普企业 Red Hat Enterprise Linux 3 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 8 (AMD64) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 ssacli-2.60-18.0.x86_64.rpm Storage 存储设备 Server 服务器 Software - System Management 软件 - 系统管理英语（美国）, 日语, 德语, 法语, 意大利语, 西班牙语

HPE SSA CLI is distributed using Red Hat Package Manager (RPM) packages.

If there is an older version of HPE SSA CLI installed on the system (Before version 2.60.18.0), please use "rpm -e hpssacli" to remove it first.
If there is an older version of HPE SSA CLI installed on the system (2.60.18.0 and later), please use "rpm -e ssacli" to remove it first.

Use "rpm -i " to install the application.

]]>

HPE SSA CLI is distributed using Red Hat Package Manager (RPM) packages.

If there is an older version of HPE SSA CLI installed on the system (Before version 2.60.18.0), please use "rpm -e hpssacli" to remove it first.
If there is an older version of HPE SSA CLI installed on the system (2.60.18.0 and later), please use "rpm -e ssacli" to remove it first.

Use "rpm -i " to install the application.

]]> ssacli-2.60-18.0.x86_64.rpm HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI for Linux 64-bit 适用于 Linux 64 位的 HPE 智能存储管理员诊断应用程序（HPE SSADU） CLI HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI for Linux 64-bit 适用于 Linux 64 位的 HPE 智能存储管理员诊断应用程序（HPE SSADU） CLI Hewlett Packard Enterprise 惠普企业 Red Hat Enterprise Linux 3 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 8 (AMD64) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 ssaducli-2.60-18.0.x86_64.rpm Storage 存储设备 Server 服务器 Software - System Management 软件 - 系统管理英语（美国）, 日语, 德语, 法语, 意大利语, 西班牙语

HPE SSADUCLI is distributed using Red Hat Package Manager (RPM) packages.

If there is an older version of HPE SSADUCLI installed on the system (Before version 2.60.18.0), please use "rpm -e hpssaducli" to remove it first.
If there is an older version of HPE SSADUCLI installed on the system (2.60.18.0 and later), please use "rpm -e ssaducli" to remove it first.

Use "rpm -i " to install the application.

]]>

HPE SSADUCLI is distributed using Red Hat Package Manager (RPM) packages.

If there is an older version of HPE SSADUCLI installed on the system (Before version 2.60.18.0), please use "rpm -e hpssaducli" to remove it first.
If there is an older version of HPE SSADUCLI installed on the system (2.60.18.0 and later), please use "rpm -e ssaducli" to remove it first.

Use "rpm -i " to install the application.

]]> ssaducli-2.60-18.0.x86_64.rpm Insight Diagnostics Online Edition for Linux (x86-64) 适用于 Linux 的 HP Insight Diagnostics Online Edition (x86-64) Insight Diagnostics Online Edition for Linux (x86-64) Insight Diagnostics Online Edition for Linux (x86-64) Hewlett Packard Enterprise 惠普企业 SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpdiags-10.60.2109.linux.x86_64.rpm Server 服务器 Software - System Management 软件 - 系统管理英语（美国）, 日语, 德语, 法语, 意大利语, 西班牙语, 简体中文 The following component(s) are required for Insight Diagnostics Online Edition for Linux:

System Management Homepage, version 7.0.0-12 or higher

The following component(s) are recommended for Insight Diagnostics Online Edition for Linux to make full use of its capabilities:

System Health Application, version 9.0.0 or higher

You can install them by using the SPP or downloading them individually from HPE Support Center.

]]> The following component(s) are required for Insight Diagnostics Online Edition for Linux:

System Management Homepage, version 7.0.0-12 or higher

The following component(s) are recommended for Insight Diagnostics Online Edition for Linux to make full use of its capabilities:

System Health Application, version 9.0.0 or higher

You can install them by using the SPP or downloading them individually from HPE Support Center.

]]> Login with a privileged acount and download the Insight Diagnostics rpm to a local directory and change to that directory. Enter the following command to install the utility:

rpm -Uvh < rpmFilename >

For example, rpm -Uvh hpdiags-< version >.x86_64.rpm

The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags

For other Insight Diagnostics command line options:

cd /opt/hp/hpdiags/
./hpdiags -?

Note: Insight Diags can also be installed by using the SPP. See Service Pack for ProLiant Quick Start Guide for more information.

]]> Login with a privileged acount and download the Insight Diagnostics rpm to a local directory and change to that directory. Enter the following command to install the utility:

rpm -Uvh < rpmFilename >

For example, rpm -Uvh hpdiags-< version >.x86_64.rpm

The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags

For other Insight Diagnostics command line options:

cd /opt/hp/hpdiags/
./hpdiags -?

Note: Insight Diags can also be installed by using the SPP. See Service Pack for ProLiant Quick Start Guide for more information.

]]> hpdiags-10.60.2109-2176.linux.x86_64.rpm