Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>In addition, the System Management Homepage (SMH) component (version 7.2.2.9 or later) is required for a single server web-based user interface.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the installation.
]]>
In addition, the System Management Homepage (SMH) component (version 7.2.2.9 or later) is required for a single server web-based user interface.
]]>
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the installation.
]]>
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
]]>The controller HP StorageWorks 81B 8Gb Single Port PCI-e FC HBA will be shown as QLogic BR-415/815 4G/8G FC HBA.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
]]>The controller HP StorageWorks 81B 8Gb Single Port PCI-e FC HBA will be shown as QLogic BR-415/815 4G/8G FC HBA.
]]>Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to perform the driver installation.
]]>Click the "Install" button to perform the driver installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. Use the appropriate driver included in the HP Service Pack for ProLiant 2016.04.0, which is available at www.hpe.com/servers/spp/download.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.
Component execution outside of HPE Service Pack for Proliant:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
If you intend to install the network driver for the QLogic Converged Network Adapter, the NIC driver version that matches this FCoE driver is 5.3.30.1001.
If you intend to install the network driver for the QLogic Converged Network Adapter, the NIC driver version that matches this FCoE driver is 5.3.30.1001.
If you intend to install the network driver for the QLogic Converged Network Adapter, the NIC driver version that matches this FCoE driver is 5.3.30.1001.
]]>
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. Use the appropriate driver included in the HP Service Pack for ProLiant 2016.04.0, which is available at www.hpe.com/servers/spp/download.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.
Component execution outside of HPE Service Pack for Proliant:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>Click the "Install" button to perform the driver installation.]]>
Click the "Install" button to perform the driver installation.]]>
Click the "Install" button to perform the driver installation.]]>
Click the "Install" button to perform the driver installation.]]>
Click the "Install" button to perform the driver installation.]]>
Click the "Install" button to perform the driver installation.]]>
The management interface driver must be installed on the server.
Microsoft .Net Framework 2.0 or later is required to launch HPONCFG GUI.
]]>Click on the install button to install the utlility on the server. This does not require a reboot.
The utility will be installed in the program files under the directory Hp\Hponcfg\
A shortcut for the graphical interface of the utility will be provided in "Start Menu > Programs > HP System Tools > HP Lights-Out Online Configuration Utility".
]]>The management interface driver must be installed on the server.
Microsoft .Net Framework 2.0 or later is required to launch HPONCFG GUI.
]]>Place Component to a directory in a temporary directory on your hard drive. Double-click it to run.
Click on the install button to install the utlility on the server. This does not require a reboot.
The utility will be installed in the program files under the directory HewlettPackardEnterprise\HPONCFG\
A shortcut for the graphical interface of the utility will be provided in "Start Menu > Programs > HPE System Tools > HP Lights-Out Online Configuration Utility".
]]>This document is in Adobe Acrobat © .PDF file format. If you need the Acrobat Reader, visit Adobe Systems Inc.
]]>HP Insight Management Agents Installation Guide
This document is in Adobe Acrobat © .PDF file format. If you need the Acrobat Reader, visit Adobe Systems Inc.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the Install button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Click the Install button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the Install button to proceed with the installation.]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
For additional release notes, see http://www.hp.com/support/HP_proliant_networking_software_10_85_RN_en.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
For additional release notes, see http://www.hp.com/support/HP_proliant_networking_software_10_85_RN_en.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Click the "Install" button to proceed with the installation.]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.]]>
From that drive and directory, execute the downloaded file.]]>
From that drive and directory, execute the downloaded file.]]>
From that drive and directory, execute the downloaded file.]]>
From that drive and directory, execute the downloaded file.]]>
From that drive and directory, execute the downloaded file.]]>
From that drive and directory, execute the downloaded file.]]>
From that drive and directory, execute the downloaded file.]]>
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Example: C:\>cp004354.exe.
The HPE Storage Tape Drivers for Windows can be executed in a graphical user interface mode or silent mode. If /s or /silent command line parameter is supplied, the HPE StoreEver Tape Drivers for Windows installer executes quietly without displaying graphical user interface and honors all command line parameters. In graphical user interface mode, all command line parameters are ignored.
Command Line Parameters
| /h /help /? | Help |
| /s /silent | Runs without graphical user interface (if any of the drivers are already up to date, /f /force option is required). |
| /f /force | Install continues regardless of version previously installed. |
| /i /install | Install all available drivers. |
| /i:[driver1.inf, driver2.inf...] | Install only driver1.inf and driver2.inf. Example: /i:hplto.inf will only install HP LTO Tape Driver. |
| /u /install | Uninstall all available drivers. |
| /u:[driver1.inf, driver2.inf...] | Uninstall only driver1.inf and driver2.inf. Example: /u:hplto.inf will only uninstall HP LTO Tape Driver. |
| /InstallLTO | Installs HP LTO Tape Driver only. This parameter is deprecated; use /i:hplto.inf instead. |
| /UninstallLTO | Uninstall LTO Tape Driver only. This parameter is deprecated; use /u:hplto.inf instead. |
The following component(s) are recommended for Insight Diagnostics Online Edition for Windows to make full use of its capabilities:
The Insight Diagnostics Online Edition for Windows contains the Windows program and related files.
]]>The following component(s) are recommended for Insight Diagnostics Online Edition for Windows to make full use of its capabilities:
]]>
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Users will automatically be logged out after a predetermined period of inactivity when using HPE SSA and will have to re-login.
On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using HPE SSA.
When clicking on a controller that is currently being configured in a different HPE SSA session, a message will appear which allows you to override the other HPE SSA session or cancel. If you choose to override the other HPE SSA session, any unsaved changes in the other session will be discarded.
To uninstall HPE SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run HPE SSA in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Users will automatically be logged out after a predetermined period of inactivity when using HPE SSA and will have to re-login.
On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using HPE SSA.
When clicking on a controller that is currently being configured in a different HPE SSA session, a message will appear which allows you to override the other HPE SSA session or cancel. If you choose to override the other HPE SSA session, any unsaved changes in the other session will be discarded.
To uninstall HPE SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run HPE SSA in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, click the Start button and navigate to Programs/HPE System Tools/HPE Smart Storage Administrator CLI. This will run the CLI in a command prompt environment.
]]>To enter the HPE SSA CLI console type: hpssacli
Commands can also be executed from outside the HPE SSA CLI console using the syntax: hpssacli
Type "hpssacli help" or type "help" at the CLI prompt for usage details.
]]>
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, click the Start button and navigate to Programs/HPE System Tools/HPE Smart Storage Administrator CLI. This will run the CLI in a command prompt environment.
]]>To enter the HPE SSA CLI console type: hpssacli
Commands can also be executed from outside the HPE SSA CLI console using the syntax: hpssacli
Type "hpssacli help" or type "help" at the CLI prompt for usage details.
]]>
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>hpssaducli -f adu-report.zip
To generate a SmartSSD Wear gauge report, enter the following command:
hpssaducli -ssdrpt -f ssd-report.zip
More options can be found by "hpssaducli -help".
Additional Notes
----------------
Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
(ZIP) format.
The diagnostic report output archive contains the following files:
* ADUReport.txt => Diagnostic report in text format
* ADUReport.xml => Diagnostic report in XML format
* ADUReport.htm => HTML viewer for diagnostic report
* report.checksum => checksum file
* SlotX.txt (SlotX.old) => Controller serial output log
Note: The serial output log file(s) are only available if the "HP Smart
Array SAS/SATA Event Notification Service" is installed and running.
To view the diagnostic report in a browser, extract the ADUReport.htm. Open
ADUReport.htm in the browser.
The SmartSSD wear gauge report output archive contains the following files:
* SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
* SmartSSDWearGaugeReport.json => SmartSSD wear gauge report in JSON format
* SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
To view the SmartSSD wear gauge report in a browser, extract the
SmartSSDWearGaugeReport.json, SmartSSDWearGaugeReport.htm files to a
directory (both files must reside in the same directory). Open
SmartSSDWearGaugeReport.htm in the browser.
Known Issues
------------
* When installing the 32-bit version of HPESSADUCLI on a system that has a
64-bit (x64) version of HPESSAADUCLI installed, please uninstall the 64-bit
version first. Failing to uninstall the 64-bit version will cause the 32-bit
installation to fail.
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>hpssaducli -f adu-report.zip
To generate a SmartSSD Wear gauge report, enter the following command:
hpssaducli -ssdrpt -f ssd-report.zip
More options can be found by "hpssaducli -help".
Additional Notes
----------------
Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
(ZIP) format.
The diagnostic report output archive contains the following files:
* ADUReport.txt => Diagnostic report in text format
* ADUReport.xml => Diagnostic report in XML format
* ADUReport.htm => HTML viewer for diagnostic report
* report.checksum => checksum file
* SlotX.txt (SlotX.old) => Controller serial output log
Note: The serial output log file(s) are only available if the "HP Smart
Array SAS/SATA Event Notification Service" is installed and running.
To view the diagnostic report in a browser, extract the ADUReport.htm. Open
ADUReport.htm in the browser.
The SmartSSD wear gauge report output archive contains the following files:
* SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
* SmartSSDWearGaugeReport.json => SmartSSD wear gauge report in JSON format
* SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
To view the SmartSSD wear gauge report in a browser, extract the
SmartSSDWearGaugeReport.json, SmartSSDWearGaugeReport.htm files to a
directory (both files must reside in the same directory). Open
SmartSSDWearGaugeReport.htm in the browser.
Known Issues
------------
* When installing the 32-bit version of HPESSADUCLI on a system that has a
64-bit (x64) version of HPESSAADUCLI installed, please uninstall the 64-bit
version first. Failing to uninstall the 64-bit version will cause the 32-bit
installation to fail.
HP 3PAR HostExplorer smart component will be installed only if the host has connectivity to HP 3PAR StoreServ.
]]>HP 3PAR HostExplorer smart component will be installed only if the host has connectivity to HP 3PAR StoreServ.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>To use HP Smart Update Manager from the Service Pack for ProLiant :
]]>
Release Version and/or Date:
8.00
Last Recommended or Critical Version:
8.00
Previous Version of Firmware:
7.02
Firmware Dependency:
None
Enhancements/New Features:
Increased performance of SATA drives by increasing command queue depth.
Problems Fixed:
Known Issues:
None
]]>
To use HP Smart Update Manager from the Service Pack for ProLiant :
]]>
Release Version and/or Date:
8.00
Last Recommended or Critical Version:
8.00
Previous Version of Firmware:
7.02
Firmware Dependency:
None
Enhancements/New Features:
Increased performance of SATA drives by increasing command queue depth.
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant :
]]>
Release Version and/or Date:
4.10(A)
Last Recommended or Critical Version:
4.04
Previous Version of Firmware:
4.04
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
If an unexpected power outage occurred, the system might stop operating during Power-On Self Test
Controller could stop responding when Smart Cache is performing a read operation
Modified component installer to detect if the Windows HPCISSS3.sys driver version 100.18.2.64, 6.18.2.64 or 6.18.2.32 is installed. With these HPCISSS3.sys driver versions a Windows blue screen could occur during installation of the controller firmware. HPCISSS3.sys driver must be updated to versions as follow:
Also, the Windows operating system must be restarted before attempting to install this component.
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant :
]]>
Release Version and/or Date:
4.10(A)
Last Recommended or Critical Version:
4.04
Previous Version of Firmware:
4.04
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
If an unexpected power outage occurred, the system might stop operating during Power-On Self Test
Controller could stop responding when Smart Cache is performing a read operation
Modified component installer to detect if the Windows HPCISSS3.sys driver version 100.18.2.64, 6.18.2.64 or 6.18.2.32 is installed. With these HPCISSS3.sys driver versions a Windows blue screen could occur during installation of the controller firmware. HPCISSS3.sys driver must be updated to versions as follow:
Also, the Windows operating system must be restarted before attempting to install this component.
Known Issues:
None
Run Smart Component using HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM):
You can either manually run the Smart Component from the SPP to install the firmware or use HP SUM to deploy it.
To manually run the Smart Component, complete the following steps:
To deploy the Smart Component using HP SUM, complete the following steps:
For more information on the SPP, go to www.hp.com/go/spp/download or www.hp.com/go/spp/documentation.
Release Version and/or Date:
15.10.10.00
Last Recommended or Critical Version:
15.10.09.00
Previous Version of Firmware:
15.10.09.00
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed in version 15.10.10.00:
Known Issues:
None
Run Smart Component using Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM):
You can either manually run the Smart Component from the SPP to install the firmware or use HP SUM to deploy it.
To manually run the Smart Component, complete the following steps:
To deploy the Smart Component using HP SUM, complete the following steps:
For more information on the SPP, go to www.hp.com/go/spp/download or www.hp.com/go/spp/documentation.
Release Version and/or Date:
15.10.10.00
Last Recommended or Critical Version:
15.10.09.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed in version 15.10.10.00:
Known Issues:
None
To use HP Smart Update Manager from the Service Pack for ProLiant :
]]>
Release Version and/or Date:
15.10.10.00
Last Recommended or Critical Version:
15.10.09.00
Previous Version of Firmware:
15.10.09.00
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed in version 15.10.10.00:
Known Issues:
None
To use HP Smart Update Manager from the Service Pack for ProLiant :
]]>
Release Version and/or Date:
15.10.10.00
Last Recommended or Critical Version:
15.10.09.00
Previous Version of Firmware:
15.10.09.00
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed in version 15.10.10.00:
Known Issues:
None
WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE:All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\Verbose.log and flash summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.
]]>GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
NOTE: Reboot your system if you would like the update to take effect immediately.
IMPORTANT: Power up/down sequence is important to maintain integrity of the configuration, please refer to "HP D6000 Disk Enclosure User Guide" document for more details.
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE:All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\Verbose.log and flash summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.
]]>GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
NOTE: Reboot your system if you would like the update to take effect immediately.
IMPORTANT: Power up/down sequence is important to maintain integrity of the configuration, please refer to "HP D6000 Disk Enclosure User Guide" document for more details.
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use HP Smart Update Manager from the HP Service Pack for ProLiant :
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
This method allows user to upgrade all tape drives attached to the server. Simply run the component by issuing following command.
C:\CPxxxxxx.exe
Method II : Discover and Upgrade (advanced users only)
This method gives user more control over firmware manipulation by giving user following options
Steps
Usage:
CPxxxxxx.exe [options]
[options]
/d /discover <filepath\filename.xml> Discover and place results in xml file.
/u /upgrade <filepath\filename.xml> Upgrade from selected tape drives in xml file.
/a /all Discover and upgrade all tape drives.
/s /silent Silent exeuction.
/v /verbose Verbose exeuction.
/h /help Display this usage information.
default (no arguments) Discover and upgrade all attached tape drives.
iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hp.com/go/ilo
Select your lights-out product, then support & documents, then manuals.
iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hp.com/go/ilo
Select your lights-out product, then support & documents, then manuals.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| HP Ethernet 1Gb 2-port 330i Adapter (18D2) | 1.65 | 17.2.1 | 1.3.16 | n/a | 17.2.0 |
| HP Ethernet 1Gb 4-port 331T Adapter | 1.46 | 17.4.1 | |||
| HP Ethernet 1Gb 4-port 331i Adapter (3372) HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331i-SPI Adapter |
1.46 | n/a | |||
| HP Ethernet 1Gb 2-port 332i Adapter (2133) | 1.39 | n/a | |||
| HP Ethernet 1Gb 2-port 332T Adapter | 1.39 | 17.4.1 |
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| HP Ethernet 1Gb 2-port 330i Adapter (18D2) | 1.65 | 17.2.1 | 1.3.15 | n/a | 17.2.0 |
| HP Ethernet 1Gb 2-port 330i Adapter (22BD) | 2.10 | 17.4.1 | |||
| HP Ethernet 1Gb 4-port 331i Adapter (22BE) HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331T Adapter |
1.46 | 17.4.1 | |||
| HP Ethernet 1Gb 4-port 331i Adapter (3372) HP Ethernet 1Gb 4-port 331i-SPI Adapter |
1.46 | n/a | |||
| HP Ethernet 1Gb 2-port 332i Adapter (2133) | 1.39 | n/a | |||
| HP Ethernet 1Gb 2-port 332i Adapter (22E8) HP Ethernet 1Gb 2-port 332T Adapter |
1.39 | 17.4.1 |
]]>
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | EEPROM/NVM Version | OROM Version |
|---|---|---|
| HP Ethernet 1Gb 2-port 361i Adapter | 80000CD5 | 1.1446.0 |
| HP Ethernet 1Gb 2-port 361FLB Adapter | 80000DB4 | |
| HP Ethernet 1Gb 2-port 361T Adapter | 80000E0D | |
| HP Ethernet 1Gb 2-port 363i Adapter | 80000D00 | |
| HP Ethernet 1Gb 1-port 364i Adapter | 80000BEE | |
| HP Ethernet 1Gb 4-port 366FLR Adapter | 80000DCF | |
| HP Ethernet 1Gb 4-port 366i Adapter | 80000E24 | |
| HP Ethernet 1Gb 4-port 366M Adapter | 80000DA9 | |
| HP Ethernet 1Gb 2-port 367i Adapter | 80000C72 | |
| HP Ethernet 10Gb 2-port 560FLB Adapter | 800008C7 | |
| HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter | 80000838 | |
| HP Ethernet 10Gb 2-port 560SFP+ Adapter | 80000835 | |
| HP Ethernet 10Gb 2-port 560M Adapter | 8000083D | |
| HP Ethernet 10Gb 2-port 561FLR-T Adapter | 800005B6 | |
| HP Ethernet 10Gb 2-port 561T Adapter | 800005D3 | |
| HP Ethernet 10Gb 2-port 562i Adapter | 800006FC |
The combo image v1.1446.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46 & UEFI Drivers: 1GbE - v7.3.20, 10GbE - v5.0.20.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | EEPROM/NVM Version | OROM Version |
|---|---|---|
| HP Ethernet 1Gb 2-port 361i Adapter | 80000CD5 | 1.1446.0 |
| HP Ethernet 1Gb 2-port 361FLB Adapter | 80000DB4 | |
| HP Ethernet 1Gb 2-port 361T Adapter | 80000E0D | |
| HP Ethernet 1Gb 2-port 363i Adapter | 80000D00 | |
| HP Ethernet 1Gb 1-port 364i Adapter | 80000BEE | |
| HP Ethernet 1Gb 4-port 366FLR Adapter | 80000DCF | |
| HP Ethernet 1Gb 4-port 366i Adapter | 80000E24 | |
| HP Ethernet 1Gb 4-port 366M Adapter | 80000DA9 | |
| HP Ethernet 1Gb 4-port 366T Adapter | 80000DC6 | |
| HP Ethernet 1Gb 2-port 367i Adapter | 80000C72 | |
| HP Ethernet 10Gb 2-port 560FLB Adapter | 800008C7 | |
| HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter | 80000838 | |
| HP Ethernet 10Gb 2-port 560SFP+ Adapter | 80000835 | |
| HP Ethernet 10Gb 2-port 560M Adapter | 8000083D | |
| HP Ethernet 10Gb 2-port 561FLR-T Adapter | 800005B6 | |
| HP Ethernet 10Gb 2-port 561T Adapter | 800005D3 | |
| HP Ethernet 10Gb 2-port 562i Adapter | 800006FC | |
| HPE Ethernet 1Gb 4-port 366i Communication Board | 80000EBF | |
| HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter | 800029F7 | 1.1375.0 |
| HPE Ethernet 10Gb 2-port 562SFP+ Adapter | 800029F6 |
The combo image v1.1446.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v7.3.20, 10GbE - v5.0.20, 40GbE - v1.9.27.
The combo image v1.1375.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v6.9.13, 10GbE - v5.0.20, 40GbE - v1.5.14.
]]>Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | Boot Code Version | PXE Version | UEFI Version | iSCSI Version | FCoE Version | CCM Version | L2 Version |
| HP Flex-10 10Gb 2-port 530FLB Adapter HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter HP Flex-10 10Gb 2-port 530M Adapter HP Ethernet 10Gb 2-port 530SFP+ Adapter HP Ethernet 10Gb 2-port 530T Adapter |
7.13.75 | 7.14.5 | 7.14.65 | n/a | n/a | 7.14.3 | 7.12.25 |
| HP Ethernet 10Gb 2-port 533FLR-T Adapter HP FlexFabric 10Gb 2-port 534FLB Adapter HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter HP FlexFabric 10Gb 2-port 534M Adapter HP StoreFabric CN1100R Dual Port Converged Network Adapter HP FlexFabric 20Gb 2-port 630FLB Adapter HP FlexFabric 20Gb 2-port 630M Adapter |
7.13.75 | 7.14.5 | 7.14.65 | 7.14.0 | 7.14.3 | 7.14.3 | 7.12.25 |
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | Boot Code Version | PXE Version | UEFI Version | iSCSI Version | FCoE Version | CCM Version | L2 Version |
| HP Flex-10 10Gb 2-port 530FLB Adapter HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter HP Flex-10 10Gb 2-port 530M Adapter HP Ethernet 10Gb 2-port 530SFP+ Adapter HP Ethernet 10Gb 2-port 530T Adapter |
7.13.75 | 7.14.5 | 7.14.65 | n/a | n/a | 7.14.3 | 7.12.25 |
|
HP Ethernet 10Gb 2-port 533FLR-T Adapter |
7.13.75 | 7.14.5 | 7.14.65 | 7.14.0 | 7.14.3 | 7.14.3 | 7.12.25 |
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | Boot Code Version | PXE Version | iSCSI Version | NCSI Version |
| HP NC382i Integrated Dual Port Multifunction Gigabit Server Adapter | 5.2.3 | n/a | 7.4.2 | 2.0.12 |
| HP NC532m Dual Port 10GbE Multifunction BL-c Adapter | 6.2.28 | 7.0.53 | 7.4.2 | n/a |
| HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) | 6.2.28 | n/a | 3.1.5 | n/a |
| HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) | 6.2.28 | n/a | 4.2.10 | n/a |
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | Boot Code Version | PXE Version | iSCSI Version | NCSI Version |
| HP NC382i Integrated Dual Port Multifunction Gigabit Server Adapter | 5.2.3 | n/a | 7.4.2 | 2.0.12 |
| HP NC532m Dual Port 10GbE Multifunction BL-c Adapter | 6.2.28 | 7.0.53 | 7.4.2 | n/a |
| HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) | 6.2.28 | n/a | 3.1.5 | n/a |
| HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) | 6.2.28 | n/a | 4.2.10 | n/a |
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>| NIC | Boot Code (MFW) Version | UEFI Version | PXE Version |
| HPE Ethernet 4x25Gb 1-port 620QSFP28 Adapter | 8.11.1.0 | 4.0.0.9 | 1.0.17 |
]]>
http://www.hpe.com/storage/spock/
The HPE supplied QLogic driver must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate driver included in the Service Pack for ProLiant 2016.10.0, which is available at http://www.hpe.com/servers/spp/download:
http://www.hpe.com/storage/spock/
The HPE supplied QLogic driver must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate driver included in the Service Pack for ProLiant 2016.10.0, which is available at http://www.hpe.com/servers/spp/download:
http://www.hpe.com/storage/spock/
The HPE supplied QLogic driver must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate driver included in the HPE Service Pack for ProLiant 2016.10.0, which is available at http://www.hpe.com/servers/spp/download:
HPE Storage Fibre Channel Adapter Kit for the QLogic Storport Driver for Windows Server 2016 version 9.2.2.20, cp029979.exe
http://www.hpe.com/storage/spock/
The HPE supplied Emulex driver must be installed prior to this firmware component being identified by HP SUM for deployment. The driver is available on the HPE.com website at http://www.hpe.com/:
HPE Storage Fibre Channel Adapter Kit for the x86 Emulex Storport Driver v11.1.145.16 cp029980.exe
]]>http://www.hpe.com/storage/spock/
The HPE supplied Emulex driver must be installed prior to this firmware component being identified by HP SUM for deployment. The driver is available on the HPE.com website at http://www.hpe.com/:
HPE Storage Fibre Channel Adapter Kit for the x64 Emulex Storport Driver v11.1.145.16 cp029981.exe
http://www.hpe.com/storage/spock/
The HPE supplied Emulex NIC driver must be installed prior to this firmware component being identified by HP SUM for deployment. The driver is available on the HPE.com website at http://www.hpe.com/.
HPE Emulex 10GbE Driver for Windows Server 2008 x86 Editions v11.1.145.30 cp029509.exe
Note: To enable the FCoE/iSCSI protocol on devices that support it, please install the appropriate HPE supplied Emulex FCoE/iSCSI driver available on the HPE.com website at http://www.hpe.com/.
]]>The downloaded file is a self-extracting executable with a filename based on the Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
http://www.hpe.com/storage/spock/
The HPE supplied Emulex NIC driver must be installed prior to this firmware component being identified by HP SUM for deployment. The driver is available on the HPE.com website at http://www.hpe.com/.
HPE Emulex 10GbE Driver for Windows Server 2008 x64 Editions v11.1.145.30 cp029510.exe
HPE Emulex 10GbE Driver for Windows Server 2008 R2 v11.1.145.30 cp029511.exe
HPE Emulex 10Gbe Driver for Windows Server 2012 v11.1.145.30 cp029512.exe
HPE Emulex 10Gbe Driver for Windows Server 2012 R2 v11.1.145.30 cp029513.exe
HPE Emulex 10/20 GbE Driver for Windows Server 2016 v11.1.196.4 cp029150.exe
Note: To enable the FCoE/iSCSI protocol on devices that support it, please install the appropriate HPE supplied Emulex FCoE/iSCSI driver which is available on the HPE.com website at http://www.hpe.com/.
]]>The downloaded file is a self-extracting executable with a filename based on the Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Click the Install button to proceed with the installation.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.36.5000 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.36.5000 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.14.2204 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.14.2204 | HP_2420110034 |
]]>
Click the Install button to proceed with the installation.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544M Adapter (644161-B21) | 2.36.5000 | HP_0240230019 |
| HP InfiniBand QDR/EN 10Gb Dual Port 544M Adapter (644160-B21) | 2.36.5000 | HP_0250230018 |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter (649281-B21) | 2.36.5000 | HP_0280210019 |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter (649282-B21_Cx and 649282-B21_B2) | 2.36.5000 | HP_0230240019 HP_0230220019 |
| HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter (649283-B21_Cx and 649283-B21_B2) | 2.36.5000 | HP_0230240009 HP_0230220009 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.36.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.36.5000 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.36.5000 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.36.5000 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.36.5000 | HP_1390110023 |
| HP Infiniband QDR/Ethernet 10Gb 2P 544i Adapter (Argos) | 2.30.3200 | HP_0280110018 |
]]>
Release Version and/or Date:
3.30
Last Recommended or Critical Version:
3.30
Previous Version of Firmware:
3.14
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed in version 3.30:
Problems Fixed in version 3.30(B):
When attempting to install firmware under Microsoft Windows Server 2012 R2, the firmware installation would fail resulting in an APPCRASH exception error.
Known Issues:
None
To use HP Smart Update Manager from the Service Pack for ProLiant :
]]>
Release Version and/or Date:
3.30 (B)
Last Recommended or Critical Version:
3.30
Previous Version of Firmware:
3.14
Firmware Dependency:
None
Enhancements/New Features in v3.30 (B):
Problems Fixed (v3.30):
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
To use HP Smart Update Manager from the Service Pack for ProLiant :
Problems Fixed in version 0.50 (D):
Known Issues:
None
To use HP Smart Update Manager from the Service Pack for ProLiant :
Known Issues:
None
To update firmware from Windows operating system on target server:
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):
1. Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
2. Place the desired firmware to be updated in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
3. Boot from the newly created USB key.
4. Follow directions to complete firmware update.
To update firmware from Windows operating system on target server:
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):
1. Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
2. Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
3. Boot from the newly created USB key.
4. Follow the on-screen directions to complete the firmware update.
Installation Notes for using the component as a stand alone component
This smart component is a self-extracting executable. The smart component unpacks itself, flashes the firmware on the HPE BladeSystem c-Class Onboard Administrator, and cleans up.
The general command line syntax for this smart component is
cpxxxxxx.exe /target <netAddress> /user <username> /passwd <password> [/s[ilent]] [/f[orce]] [/logdir <path>]
where cpxxxxxx.exe represents the filename of the component
NOTE: All arguments and information enclosed in brackets are optional. If required arguments are not included on the command line, you will be prompted to provide the input.
To flash the firmware:
The return codes are :
Installation Notes for using the component with HP Smart Update Manager and the SPP
Installation Notes for using the firmware extracted from the component
The user guide for the Onboard Administrator is located here.
The user guide for the Onboard Administrator command line interface is located here.
HPE BladeSystem c-Class OA Firmware
Release Version
Version 4.70
Previous Version of Firmware
Version 4.60
Upgrade Requirements
Optional - Update to this firmware version if any documented fixes or enhanced functionality provided by this version would be useful to your system.
Firmware Dependency
For firmware compatibility information,see the HP Service Pack for ProLiant Information Library at:
http://www.hpe.com/info/spp/documentation
Important Notes
Starting OA 4.50 release, a standardized code signing and validation mechanism has been introduced to enhance the firmware image authenticity.
For customers using Firmware ROM image to upgrade OA:
For OA with firmware version less than 3.50, first update to OA 3.50 and then continue updating to OA 4.50 or above.
For customers using Smart Components to upgrade OA:
OA firmware update mechanisms which rely on HP Smart Components (example: EFM), will not be affected by this change. The Smart Component will automatically perform the intermediate upgrade to OA 3.50 before performing the OA 4.50 or above upgrade.
Flash Disaster Recovery to a version of firmware 4.50 or above issupported. The behavior is seen due to the implementation of a new firmware image signing mechanism in OA firmware version 4.50 and above, which causes the FDR mechanism to see the firmware image as an invalid image.
The workaround for this is to use Flash Disaster Recovery procedure to recover to a version of firmware prior to 4.50 and then do a firmware upgrade to the intended version (4.50 or later).
The OA only supports SPP ISO images that are less than 4GB in size, whether hosted directly via the Enclosure DVD feature or an attached USB key, or mounted remotely via a specified URL. If an ISO image exceeds 4 GB, the CLI SHOW FIRMWARE MANAGEMENT command displays ISO URL Status as “Invalid URL.”
If an SPP ISO image exceeds 4 GB, it is necessary to create a custom ISO image that excludes components unnecessary to the OA EFM blade firmware update process. At a minimum, the custom ISO must contain the firmware components for HP ProLiant BL servers. (When using HP SUM to create the custom ISO image, select Firmware as the Component Type, and select HP ProLiant BL Series as the Server Type.) For information about creating a custom ISO image compatible for OA EFM functionality, see the HP BladeSystem Onboard Administrator User Guide. More HP SUM information can be found via HP Smart Update Manager online help or at the HP Smart Update Enterprise Information Library (http://www.hpe.com/info/hpsum/documentation).
Onboard Administrator 4.40 has received FIPS 140-2 Certification. For more information, see the NIST CSRC Cryptographic Module Validation Program webpage (http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140val-all.htm#2587)
When the Enable DHCPv6, Enable Router Advertisements, or Enable SLAAC enclosure IPv6 settings are disabled on the Onboard Administrator, the respective DHCPv6 or SLAAC addresses of the iLOs in the enclosure are retained until these addresses expire automatically based on their respective configurations. A manual reset of the iLO releases these addresses immediately.
]]>In conjunction with the Smart Update Manager found on the SPP, the component can be used to deploy the firmware to the HPE BladeSystem c-Class Virtual Connect module.
Firmware extracted from the component can be deployed using the Virtual Connect Support Utility for the HPE BladeSystem c-Class Virtual Connect modules.
Installation Notes for using the component with Smart Update Manager and SPP
Installation Notes for using the firmware extracted from the component
Extract the firmware binary out of the component.
Place the firmware image file onto a system on the same network as the HP BladeSystem c-Class Virtual Connect module.
Start the Virtual Connect Support Utility and deploy the firmware.
HPE requires using the HPE BladeSystem c-Class Virtual Connect Support Utility version 1.13.0 (or higher) to install the HPE VC FlexFabric-20/40 F8 version 4.60, HPE VC Flex-10/10D version 4.60, HPE VC FlexFabric 10Gb/24-port version 4.60, HPE VC Flex-10 10Gb version 4.60, HPE VC 8Gb 24-Port FC version 3.08, HPE VC 16Gb 24-Port FC version 3.08, and HPE VC 8Gb 20-Port FC version 2.15 firmware. Please read the HPE BladeSystem c-Class Virtual Connect Support Utility release notes.
Please be advised of a serious issue that could cause network outage when upgrading directly from VC 2.xx release version to VC 4.60 release in Multi-Enclosure environment. Please upgrade from VC 2.xx to VC 3.70 or VC 4.10 first and then upgrade from VC 3.70 or VC 4.10 to VC 4.50 and then upgrade from VC 4.50 to VC 4.60 in a Multi-Enclosure setup.
To update HPE VC 8Gb 24-Port FC module(s) from Virtual Connect firmware 4.31 or lower to Virtual Connect 4.60 or higher, these module(s) must first be updated with either Virtual Connect firmware version 4.4x or version 4.50 (Recommended version is 4.50) before they can be updated with Virtual Connect 4.60 or higher.
The USB Key Utility is used to copy the SPP onto a portable USB key storage device. Please note that the latest version (v2.0.0.0) of the utility is now 64-bit only. If the 32-bit application is needed, please use version 1.8, however, this version will not work on an ISO image greater than 4GB.
Note: Please read the Important note section of the Release Notes for firmware upgrade instructions.
]]>To update firmware from Windows operating system on target server:
HP recommends for remote deployment of this package that you obtain the most recent version of the Service Pack for ProLiant (SPP) and follow these steps:
Enhancements/New Features for FW version 4.2.2.0 (B):
Made changes to firmware to capture more debug information.
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPDG
Last Recommended or Critical Version:
HPDG
Previous Version of Firmware:
HPDF
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPDK
Last Recommended or Critical Version:
HPDK
Previous Version of Firmware:
HPDJ
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
HPDB
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Known Issues:
None
Release Version and/or Date:
HPDD
Last Recommended or Critical Version:
HPDD
Previous Version of Firmware:
HPDC
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD5 resolves this issue.
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Previous Version of Firmware:
HPGC
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGD prevents this condition from occurring.
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problem Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancments/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPD9
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPDA.
This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
Known Issues:
None
Enhancements/New Features:
Problems fixed:
None
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPGH
Last Recommended or Critical Version:
HPGH
Previous Version of Firmware:
HPGG
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Known Issues:
None
Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Known Issues:
None
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPGK
Last Recommended or Critical Version:
HPGK
Previous Version of Firmware:
HPGJ
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problem Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Known Issues:
None
Release Version and/or Date:
HPGE
Last Recommended or Critical Version:
HPGE
Previous Version of Firmware:
HPGC
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG9
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG9
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Release Version and/or Date:
HPDE
Last Recommended or Critical Version:
HPDE
Previous Version of Firmware:
HPDC
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPDG
Last Recommended or Critical Version:
HPDG
Previous Version of Firmware:
HPDF
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPDG (B):
Problems Fixed:
Problems Fixed for HPDG (C):
Problems Fixed for HPDG (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPDK
Last Recommended or Critical Version:
HPDK
Previous Version of Firmware:
HPDJ
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPDK (B):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
HPDB
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPDB (B):
Problems Fixed:
Problems Fixed for HPDB (C):
Problems Fixed for HPDB (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Enhancements/New Features:
Enhancements/New Features for HPDA (B):
Problems Fixed:
Problems Fixed for HPDA (C):
Problems Fixed for HPDA (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD6 (B):
Problems Fixed:
Problems Fixed for HPD6 (C):
Problems Fixed for HPD6 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Problems Fixed for HPD8 (B):
Problems Fixed for HPD8 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD8 (B):
Problems Fixed for HPD8 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD9 (B):
Problems Fixed for HPD9 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD3 (B):
Problems Fixed for HPD3 (C):
Known Issues:
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
The expected time to completion of Sanitize, Format and DST operations was incorrectly reported in the Vital Products Data page D0h. If time to completion is used by an application to determine when to terminate an operation, the operation might be terminated before the operation completed. Firmware version HPD4 now correctly reports the expected time to completion for these operations.
Problems Fixed for HPD4 (B):
Problems Fixed for HPD4 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD4 (B):
Problems Fixed for HPD4 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Problems Fixed for HPD4 (B):
Problems Fixed for HPD4 (C):
Known Issues:
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Enhancements/New Features:
Enhancements/New Features for HPD9 (B):
Problems Fixed:
Problems Fixed for HPD9 (C):
Problems Fixed for HPD9 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPDD
Last Recommended or Critical Version:
HPDD
Previous Version of Firmware:
HPDC
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPDD (B):
Problems Fixed:
Problems Fixed for HPDD (C):
Problems Fixed for HPDD (D):
Known Issues:
None
]]>
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD5 resolves this issue.
Problems Fixed for HPD5 (B):
Problems Fixed for HPD5 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Enhancements/New Features for HPD8 (B):
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD4 (B):
Problems Fixed for HPD4 (C):
Known Issues:
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Enhancements/New Features for HPD4 (B):
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Problems Fixed for HPD5(B):
Problems Fixed for HPD5 (C):
Known Issues:
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD9 (B):
Problems Fixed:
Problems Fixed for HPD9(C):
Problems Fixed for HPD9 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Previous Version of Firmware:
HPGC
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGD prevents this condition from occurring.
Problems Fixed for HPGD(C):
Problems Fixed for HPGD (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD7 (B):
Problem Fixed:
Problems Fixed for HPD7 (C):
Problems Fixed for HPD7 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancments/New Features:
Problems Fixed:
Problems Fixed for HPD4 (B):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPD9
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPDA.
This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Enhancements/New Features:
Enhancements/New Features for HPD2 (B):
Problems Fixed for HPD2 (C):
Problems Fixed for HPD2 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed for HPG2 (B):
Problems Fixed for HPG2 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPG4 (C):
Problems Fixed for HPG4 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features
Problems Fixed:
Problems Fixed for HPG4 (C):
Problems Fixed for HPG4 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problem Fixed:
Problems Fixed for HPG5 (B):
Problems Fixed for HPG5 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPDA (B):
Problems Fixed:
Problems Fixed for HPDA (C):
Problems Fixed for HPDA (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problem Fixed:
Problems Fixed for HPD7 (B):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPG4 (C):
Problems Fixed for HPG4 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problem Fixed:
Problems Fixed for HPG5 (B):
Problems Fixed for HPG5 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for (B):
Problems Fixed:
Problems Fixed for HPG6 (C):
Problems Fixed for HPG6 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPGK
Last Recommended or Critical Version:
HPGK
Previous Version of Firmware:
HPGJ
Firmware Dependency:
None
Enhancements/New Features:
Problem Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPG7 (B):
Problems Fixed for HPG7 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Problems Fixed for HPD7 (B):
Problems Fixed for HPD7 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD4 (B):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPG7 (B):
Problems Fixed for HPG7 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPG4 (C):
Problems Fixed for HPG4 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPG3 (B):
Problems Fixed for HPG3 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD6 (B):
Problem Fixed:
Problems Fixed for HPD6 (C):
Problems Fixed for HPD6 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problem Fixed:
Problems Fixed for HPD9 (B):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPGE
Last Recommended or Critical Version:
HPGE
Previous Version of Firmware:
HPGC
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Problems Fixed for HPD4 (B):
Problems Fixed for HPD4 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPG4 (B):
Problems Fixed for HPG4 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features for HPD5 (C):
Problems Fixed:
Problems Fixed for HPD5 (B):
Known Issues:
None
]]>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD2 (B):
Problems Fixed for HPD2 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
Problem Fixed:
Problems Fixed for HPD1 (B):
Problems Fixed for HPD1 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Problems Fixed for HPG3 (B):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG9
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for (B):
Problems Fixed:
Problems Fixed for HPG9 (C):
Problems Fixed for HPG9 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG9
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for (B):
Problems Fixed:
Problems Fixed for HPG9 (C):
Problems Fixed for HPG9 (D):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPG1 (B):
Problems Fixed for HPG1 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
Problem Fixed:
Problems Fixed for HPD1 (B):
Problems Fixed for HPD1 (C):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD2 (B):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD8 (B):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPDE
Last Recommended or Critical Version:
HPDE
Previous Version of Firmware:
HPDC
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPDE (B):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Enhancements/New Features for HPD5 (B):
Problems Fixed:
This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPD5. This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
Known Issues:
None
]]>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPG3 (B):
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPGH
Last Recommended or Critical Version:
HPGH
Previous Version of Firmware:
HPGG
Firmware Dependency:
None
Enhancements/New Features for HPGH (B):
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features for HPD4 (B):
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features for HPD4 (B):
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Enhancements/New Features for HPD3 (B):
Problems Fixed:
None
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPS5 (B):
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPS5 (B):
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Enhancements/New Features:
Enhancements/New Features for HPD4 (B):
Problems Fixed:
None
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Improves the drive idle time behavior by reducing long periods of track dwell time, which if not implemented, could increase media lube depletion and reduce drive reliability.
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Improves the drive idle time behavior by reducing long periods of track dwell time, which if not implemented, could increase media lube depletion and reduce drive reliability.
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Problems Fixed:
Known Issues:
None
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPD1. This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
Known Issues:
None
A REBOOT is required for your computer when the setup is complete.
Notes:
To install or upgrade the driver type:
# rpm -Uvh Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.i686.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.i686.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
To install or upgrade the driver type:
# rpm -Uvh Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
To install or upgrade the driver type:
# rpm -Uvh kmod-hpsa-<version>.<OSupdate>.i686.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-hpsa-<version>.<OSupdate>.i686.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
# rpm -Uvh kmod-hpsa-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-hpsa-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver:
If using kernel version 2.6.32-504.el6 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.rhel6u6.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.rhel6u6.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
# rpm -Uvh kmod-mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.rhel6u7.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.rhel6u7.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.i586.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-8.3.7.7_2.6.32.12_0.7-1.sles11sp1.i586.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.i586
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>To get the list of all dependency files for hp-smh-templates type:
rpm –qp –-requires hp-smh-templates-<version>.rpm
]]>To install the package type:
rpm -ivh hp-smh-templates-<version>.rpm
To check whether the package is installed type:
rpm –q hp-smh-templates
Additional help is available by typing:
man hp-smh-templates
]]>To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>IMPORTANT UPDATE: HPE SSA (GUI) for Linux can now be run without requiring the HPE System Management Homepage. HPE SSA now supports a Local Application Mode for Linux. The HPE System Management Homepage is still supported, but no longer required to run the HPE SSA GUI.
To invoke, enter the following at the command prompt:
ssa -local
The command will start HP SSA in a new Firefox browser window. When the browser window is closed, HP SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
For support for HPE SSA or Smart Array controllers, please visit Contact HP.
]]>IMPORTANT UPDATE: HPE SSA (GUI) for Linux can now be run without requiring the HPE System Management Homepage. HPE SSA now supports a Local Application Mode for Linux. The HPE System Management Homepage is still supported, but no longer required to run the HPE SSA GUI.
To invoke, enter the following at the command prompt:
ssa -local
The command will start HP SSA in a new Firefox browser window. When the browser window is closed, HP SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
For support for HPE SSA or Smart Array controllers, please visit Contact HP.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the vendor specific enablement RPM use the following command:
# rpm -ivh HP-CNA_FC-hpqlgc-enablement-<version>.noarch.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
]]>
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-FC-Brocade-enablement-<version>.<arch>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://ww.hp.com/storage/spock/
]]>
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. Use the appropriate driver included in the HP Service Pack for ProLiant 2016.04.0, which is available at www.hpe.com/servers/spp/download.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.
Component execution outside of HPE Service Pack for Proliant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-emulex-smartsan-enablement-kit-<version>.noarch.rpm
Example: # rpm -ivh hpe-emulex-smartsan-enablement-kit-1.0.0.0-1.noarch.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
]]>
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. Use the appropriate driver included in the HP Service Pack for ProLiant 2016.04.0, which is available at www.hpe.com/servers/spp/download.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
For detailed information about configurable components, see the HP Smart Update Manager User Guide at http://www.hpe.com/support/HP_SUM_UG_en.
Component execution outside of HPE Service Pack for Proliant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-qlogic-smartsan-enablement-kit-<version>.noarch.rpm
Example: # rpm -ivh hpe-qlogic-smartsan-enablement-kit-3.3-1.noarch.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
]]>
The management interface driver and management agents must be installed on the server.
]]>If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :
The management interface driver and management agents must be installed on the server.
For iLO 5, openssl v1.0.x or later is required in addition to above packages.
Customers who manually compile and install openssl or intentionally relocate /usr/bin/openssl, need to set PATH environment variable to direct HPONCFG to the right/intended openssl.
If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :
To install the package, type:
After installation, the executable for hponcfg utility can be found under the directory /sbin.
]]>The following component(s) are recommended for HP Insight Diagnostics Online Edition for Linux to make full use of its capabilities:
]]>
For example, rpm -Uvh hpdiags-< version >.i586.rpm
The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags
For other Insight Diagnostics command line options:
Note: Insight Diags can also be installed by using the SPP. See Service Pack for ProLiant Quick Start Guide for more information.
]]>The following component(s) are recommended for Insight Diagnostics Online Edition for Linux to make full use of its capabilities:
You can install them by using the SPP or downloading them individually from HPE Support Center.
]]>For example, rpm -Uvh hpdiags-< version >.x86_64.rpm
The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags
For other Insight Diagnostics command line options:
Note: Insight Diags can also be installed by using the SPP. See Service Pack for ProLiant Quick Start Guide for more information.
]]>To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
# rpm -Uvh Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
A REBOOT is required for your computer when the setup is complete.
Note: If HPE System Insight Manager support is required, install the latest ProLiant Support Pack and kmod-mpt2sas-X.X.X.X-X.rhel7uN.x86_64.rpm after the OS has completed its installation process and system has rebooted.
]]>To install or upgrade the driver:
If using kernel version 3.10.0-229.el7 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.rhel7u1.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.rhel7u1.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
To install or upgrade the driver:
If using kernel version 3.10.0-327.el7 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.rhel7u2.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.rhel7u2.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.i586.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-8.3.7.7_2.6.32.12_0.7-1.sles11sp1.i586.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.i586
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>Note: If HP System Insight Manager support is required, install the latest ProLiant Support Pack and lsi-mpt2sas-kmp-KKKKK-X.X.X.X-X.sles11sp1.i586.rpm after the OS has completed its installation process and system has rebooted.
]]>
Note: If HP System Insight Manager support is required, install the latest ProLiant Support Pack and
lsi-mpt2sas-kmp-KKKKK-X.X.X.X-X.sles11sp1.x86_64.rpm after the OS has completed its installation process and system has rebooted.
To install or upgrade the driver type:
# rpm -Uvh hpvsa-kmp-{kernel-flavor}-<version>.<OSupdate>.i686.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e hpvsa-kmp-{kernel-flavor}-<version>.<OSupdate>.i686.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
To install or upgrade the driver type:
# rpm -Uvh hpvsa-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e hpvsa-kmp-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
To install or upgrade the driver type:
# rpm -Uvh kmod-hpsa-<version>.sles11.i686.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-hpsa-<version>.sles11.i686.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver:
If using 3.0.76-0.11-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-default-3.2_3.0.76_0.11-OFED.3.2.2.0.0.1.g378ff02.sles11sp3.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.sles11sp3.x86_64.rpm
If using 3.0.76-0.11-xen kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-xen-3.2_3.0.76_0.11-OFED.3.2.2.0.0.1.g378ff02.sles11sp3.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.sles11sp3.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
To install or upgrade the driver:
If using 3.0.101-63-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-default-3.2_3.0.101_63-OFED.3.2.2.0.0.1.g378ff02.sles11sp4.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.sles11sp4.x86_64.rpm
If using 3.0.101-63-xen kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-xen-3.2_3.0.101_63-OFED.3.2.2.0.0.1.g378ff02.sles11sp4.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.sles11sp4.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.i586.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-8.3.7.7_2.6.32.12_0.7-1.sles11sp1.i586.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.i586
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.i586.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-8.3.7.7_2.6.32.12_0.7-1.sles11sp1.i586.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.i586
To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
# rpm -Uvh hpvsa-kmp-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e hpvsa-kmp-<version>.<OSupdate>.x86_64.rpm
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
Note: If HPE System Insight Manager support is required, install the latest Service Pack for ProLiant and
lsi-mpt2sas-kmp-X.X.X.X-X.sles12spN.x86_64.rpm after the OS has completed its installation process and system has rebooted.
To install or upgrade the driver:
If using 3.12.28-4-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-default-3.2_k3.12.28_4-OFED.3.2.2.0.0.1.g378ff02.sles12sp0.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.sles12sp0.x86_64.rpm
If using 3.12.28-4-xen kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-xen-3.2_k3.12.28_4-OFED.3.2.2.0.0.1.g378ff02.sles12sp0.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.sles12sp0.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
To install or upgrade the driver:
If using 3.12.49-11-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-default-3.2_k3.12.49_11-OFED.3.2.2.0.0.1.g378ff02.sles12sp1.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.sles12sp1.x86_64.rpm
If using 3.12.49-11-xen kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-kmp-xen-3.2_k3.12.49_11-OFED.3.2.2.0.0.1.g378ff02.sles12sp1.x86_64.rpm mlnx-ofa_kernel-3.2-OFED.3.2.2.0.0.1.g378ff02.5.sles12sp1.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.i586.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-8.3.7.7_2.6.32.12_0.7-1.sles11sp1.i586.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.i586
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>
Update via iLO GUI, Utilities, or Scripting Interface:
To obtain firmware image for updating via iLO user interface, utilities, or scripting interface:
Update via HP Support Pack for ProLiant:
To use HP Smart Update Manager (HP SUM) from the HP Service Pack for ProLiant (SPP):
Offline:
NOTE: Use Offline mode to update systems running VMware ESXi 4.0 or ESXi 4.1.
Online:
To obtain firmware image for updating via iLO user interface, utilities, or scripting interface:
Download the SCEXE file to a client running a Linux operating system. Execute: sh CP0xxxxx.scexe --unpack=directory
This command will unpack the ilo4_1XX.bin into a user specified "directory". If the directory does not exist, the unpacker will attempt to create it.
To use HP Smart Update Manager on the Firmware Maintenance CD:
Place the Firmware Maintenance CD on a USB key using the USB Key Creator Utility.
Copy CP0xxxxx.scexe to /compaq/swpackages directory on the USB Key.
Follow HP Smart Update Manager steps to complete firmware update.
iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hp.com/go/ilo
Select your lights-out product, then support & documents, then manuals.
This command will extract the contents to "/usr/lib/i386-linux-gnu."
The CP028670.scexe script is located in the "hp-scexe-compat'' folder. Further information is available in CP028670.txt file in the "hp-firmware-nic-*" folder. The actual name of the "hp-firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| HP Ethernet 1Gb 2-port 330i Adapter (18D2) | 1.65 | 17.2.1 | 1.3.16 | n/a | 17.2.0 |
| HP Ethernet 1Gb 4-port 331T Adapter | 1.46 | 17.4.1 | |||
| HP Ethernet 1Gb 4-port 331i Adapter (3372) HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331i-SPI Adapter |
1.46 | n/a | |||
| HP Ethernet 1Gb 2-port 332i Adapter (2133) | 1.39 | n/a | |||
| HP Ethernet 1Gb 2-port 332T Adapter | 1.39 | 17.4.1 |
]]>
This command will extract the contents to "/usr/lib/x86_64-linux-gnu."
The CP028671.scexe script is located in the "hp-scexe-compat'' folder. Further information is available in CP028671.txt file in the "hp-firmware-nic-*" folder. The actual name of the "hp-firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| HP Ethernet 1Gb 2-port 330i Adapter (18D2) | 1.65 | 17.2.1 | 1.3.16 | n/a | 17.2.0 |
| HP Ethernet 1Gb 2-port 330i Adapter (22BD) | 2.10 | 17.4.1 | |||
| HP Ethernet 1Gb 4-port 331i Adapter (22BE) HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331T Adapter |
1.46 | 17.4.1 | |||
| HP Ethernet 1Gb 4-port 331i Adapter (3372) HP Ethernet 1Gb 4-port 331i-SPI Adapter |
1.46 | n/a | |||
| HP Ethernet 1Gb 2-port 332i Adapter (2133) | 1.39 | n/a | |||
| HP Ethernet 1Gb 2-port 332i Adapter (22E8) HP Ethernet 1Gb 2-port 332T Adapter |
1.39 | 17.4.1 |
]]>
Updating firmware without installing the rpm:
Additional Information:
Updating firmware without installing the rpm:
Additional Information:
Updating firmware without installing the rpm:
Additional Information:
Updating firmware without installing the rpm:
Additional Information:
This command will extract the contents to "/usr/lib/i386-linux-gnu."
The CP028022.scexe script is located in the "hp-scexe-compat'' folder. Further information is available in CP028022.txt file in the "hp-firmware-nic-*" folder. The actual name of the "hp-firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
| NIC | Boot Code Version | PXE Version | UEFI Version | iSCSI Version | FCoE Version | CCM Version | L2 Version |
| HP Flex-10 10Gb 2-port 530FLB Adapter HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter HP Flex-10 10Gb 2-port 530M Adapter HP Ethernet 10Gb 2-port 530SFP+ Adapter HP Ethernet 10Gb 2-port 530T Adapter |
7.13.75 | 7.14.5 | 7.14.65 | n/a | n/a | 7.14.3 | 7.12.25 |
| HP Ethernet 10Gb 2-port 533FLR-T Adapter HP FlexFabric 10Gb 2-port 534FLB Adapter HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter HP FlexFabric 10Gb 2-port 534M Adapter HP StoreFabric CN1100R Dual Port Converged Network Adapter HP FlexFabric 20Gb 2-port 630FLB Adapter HP FlexFabric 20Gb 2-port 630M Adapter |
7.13.75 | 7.14.5 | 7.14.65 | 7.14.0 | 7.14.3 | 7.14.3 | 7.12.25 |
]]>
This command will extract the contents to "/usr/lib/x86_64-linux-gnu."
The CP028023.scexe script is located in the "hp-scexe-compat'' folder. Further information is available in CP028023.txt file in the "hp-firmware-nic-*" folder. The actual name of the "hp-firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
| NIC | Boot Code Version | PXE Version | UEFI Version | iSCSI Version | FCoE Version | CCM Version | L2 Version |
| HP Flex-10 10Gb 2-port 530FLB Adapter HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter HP Flex-10 10Gb 2-port 530M Adapter HP Ethernet 10Gb 2-port 530SFP+ Adapter HP Ethernet 10Gb 2-port 530T Adapter |
7.13.75 | 7.14.5 | 7.14.65 | n/a | n/a | 7.14.3 | 7.12.25 |
|
HP Ethernet 10Gb 2-port 533FLR-T Adapter |
7.13.75 | 7.14.5 | 7.14.65 | 7.14.0 | 7.14.3 | 7.14.3 | 7.12.25 |
This command will extract the contents to "/usr/lib/i386-linux-gnu."
The CP028810.scexe script is located in the "hp-scexe-compat'' folder. Further information is available in CP028810.txt file in the "hp-firmware-nic-*" folder. The actual name of the "hp-firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
| NIC | Boot Code Version | PXE Version | iSCSI Version | NCSI Version |
| HP NC382i Integrated Dual Port Multifunction Gigabit Server Adapter | 5.2.3 | n/a | 7.4.2 | 2.0.12 |
| HP NC532m Dual Port 10GbE Multifunction BL-c Adapter | 6.2.28 | 7.0.53 | 7.4.2 | n/a |
| HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) | 6.2.28 | n/a | 3.1.5 | n/a |
| HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) | 6.2.28 | n/a | 4.2.10 | n/a |
]]>
This command will extract the contents to "/usr/lib/x86_64-linux-gnu."
The CP028811.scexe script is located in the "hp-scexe-compat'' folder. Further information is available in CP028811.txt file in the "hp-firmware-nic-*" folder. The actual name of the "hp-firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
| NIC | Boot Code Version | PXE Version | iSCSI Version | NCSI Version |
| HP NC382i Integrated Dual Port Multifunction Gigabit Server Adapter | 5.2.3 | n/a | 7.4.2 | 2.0.12 |
| HP NC532m Dual Port 10GbE Multifunction BL-c Adapter | 6.2.28 | 7.0.53 | 7.4.2 | n/a |
| HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) | 6.2.28 | n/a | 3.1.5 | n/a |
| HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) | 6.2.28 | n/a | 4.2.10 | n/a |
]]>
This command will extract the contents to "/usr/lib/x86_64-linux-gnu."
The CP030890.scexe script is located in the "hp-scexe-compat'' folder. Further information is available in CP030890.txt file in the "hp-firmware-nic-*" folder. The actual name of the "hp-firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
| NIC | Boot Code (MFW) Version | UEFI Version | PXE Version |
| HPE Ethernet 4x25Gb 1-port 620QSFP28 Adapter | 8.11.1.0 | 4.0.0.9 | 1.0.17 |
]]>
This package can be used with the HP Smart Update Manager (HPSUM) version 7.0.0.0 or later. Earlier versions of HPSUM cannot install this package correctly.
]]>
Updating firmware without installing the rpm:
Additional Information:
| NIC | EEPROM/NVM Version | OROM Version |
|---|---|---|
| HP Ethernet 1Gb 2-port 361i Adapter | 80000CD5 | 1.1446.0 |
| HP Ethernet 1Gb 2-port 361FLB Adapter | 80000DB4 | |
| HP Ethernet 1Gb 2-port 361T Adapter | 80000E0D | |
| HP Ethernet 1Gb 2-port 363i Adapter | 80000D00 | |
| HP Ethernet 1Gb 1-port 364i Adapter | 80000BEE | |
| HP Ethernet 1Gb 4-port 366FLR Adapter | 80000DCF | |
| HP Ethernet 1Gb 4-port 366i Adapter | 80000E24 | |
| HP Ethernet 1Gb 4-port 366M Adapter | 80000DA9 | |
| HP Ethernet 1Gb 2-port 367i Adapter | 80000C72 | |
| HP Ethernet 10Gb 2-port 560FLB Adapter | 800008C7 | |
| HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter | 80000838 | |
| HP Ethernet 10Gb 2-port 560SFP+ Adapter | 80000835 | |
| HP Ethernet 10Gb 2-port 560M Adapter | 8000083D | |
| HP Ethernet 10Gb 2-port 561FLR-T Adapter | 800005B6 | |
| HP Ethernet 10Gb 2-port 561T Adapter | 800005D3 | |
| HP Ethernet 10Gb 2-port 562i Adapter | 800006FC |
The combo image v1.1446.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46 & UEFI Drivers: 1GbE - v7.3.20, 10GbE - v5.0.20.
]]>This package can be used with the HP Smart Update Manager (HPSUM) version 7.0.0.0 or later. Earlier versions of HPSUM cannot install this package correctly.
]]>
Updating firmware without installing the rpm:
Additional Information:
| NIC | EEPROM/NVM Version | OROM Version |
|---|---|---|
| HP Ethernet 1Gb 2-port 361i Adapter | 80000CD5 | 1.1446.0 |
| HP Ethernet 1Gb 2-port 361FLB Adapter | 80000DB4 | |
| HP Ethernet 1Gb 2-port 361T Adapter | 80000E0D | |
| HP Ethernet 1Gb 2-port 363i Adapter | 80000D00 | |
| HP Ethernet 1Gb 1-port 364i Adapter | 80000BEE | |
| HP Ethernet 1Gb 4-port 366FLR Adapter | 80000DCF | |
| HP Ethernet 1Gb 4-port 366i Adapter | 80000E24 | |
| HP Ethernet 1Gb 4-port 366M Adapter | 80000DA9 | |
| HP Ethernet 1Gb 4-port 366T Adapter | 80000DC6 | |
| HP Ethernet 1Gb 2-port 367i Adapter | 80000C72 | |
| HP Ethernet 10Gb 2-port 560FLB Adapter | 800008C7 | |
| HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter | 80000838 | |
| HP Ethernet 10Gb 2-port 560SFP+ Adapter | 80000835 | |
| HP Ethernet 10Gb 2-port 560M Adapter | 8000083D | |
| HP Ethernet 10Gb 2-port 561FLR-T Adapter | 800005B6 | |
| HP Ethernet 10Gb 2-port 561T Adapter | 800005D3 | |
| HP Ethernet 10Gb 2-port 562i Adapter | 800006FC | |
| HPE Ethernet 1Gb 4-port 366i Communication Board | 80000EBF | |
| HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter | 800029F7 | 1.1375.0 |
| HPE Ethernet 10Gb 2-port 562SFP+ Adapter | 800029F6 | |
| HPE Ethernet 10Gb 2-port 563i Adapter | 80002B0E |
The combo image v1.1446.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v7.3.20, 10GbE - v5.0.20, 40GbE - v1.9.27.
The combo image v1.1375.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v6.9.13, 10GbE - v5.0.20, 40GbE - v1.5.14.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.36.5000 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.36.5000 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.14.2204 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.14.2204 | HP_2420110034 |
]]>
Before executing the smart component, install the MLNX OFED drivers and make sure that the InfiniBand modules are loaded using the following command:
# /etc/init.d/openibd status
HCA driver loaded
Configured IPoIB devices:
ib0 ib1
Currently active IPoIB devices:
The following OFED modules are loaded:
rdma_ucm
rdma_cm
ib_addr
ib_ipoib
mlx4_core
mlx4_ib
mlx4_en
mlx5_core
mlx5_ib
ib_uverbs
ib_umad
ib_ucm
ib_sa
ib_cm
ib_mad
ib_core
This restriction also means that running the Connect-IB firmware smart components in “offline mode” (with server booted to the SPP ISO) is not supported. Linux Operating System needs to be installed and the MLNX OFED drivers should be installed/loaded for the smart components to function correctly, i.e. only SPP “online mode” is supported for Connect-IB firmware smart components.
]]>Updating firmware with rpm installed:
Updating firmware without installing rpm:
| InfiniBand Card Type | Firmware Version | PSID |
| HPE Infiniband FDR 2P 545FLR-QSFP Adapter | 10.14.1100 | HP_02C0110019 |
| HPE Infiniband FDR 2-port 545QSFP Adapter | 10.14.1100 | HP_02B0110019 |
| HPE Infiniband FDR 2P 545M Adapter | 10.16.1038 | HP_02A0110019 |
]]>
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544M Adapter (644161-B21) | 2.36.5000 | HP_0240230019 |
| HP InfiniBand QDR/EN 10Gb Dual Port 544M Adapter (644160-B21) | 2.36.5000 | HP_0250230018 |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter (649281-B21) | 2.36.5000 | HP_0280210019 |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter (649282-B21_Cx and 649282-B21_B2) | 2.36.5000 | HP_0230240019 HP_0230220019 |
| HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter (649283-B21_Cx and 649283-B21_B2) | 2.36.5000 | HP_0230240009 HP_0230220009 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.36.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.36.5000 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.36.5000 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.36.5000 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.36.5000 | HP_1390110023 |
| HP Infiniband QDR/Ethernet 10Gb 2P 544i Adapter (Argos) | 2.30.3200 | HP_0280110018 |
| HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544+A8L Adapter (Apollo 8000) | 2.36.5000 | HP_2010110021 |
]]>
Updating firmware with rpm installed:
# ./CP030724.scexe in the '/usr/lib/i386-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/i386-linux-gnu/hp-firmware-smartarray-46a4d957a7-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
8.00
Last Recommended or Critical Version:
8.00
Previous Version of Firmware:
7.02
Firmware Dependency:
None
Enhancements/New Features:
Increased performance of SATA drives by increasing command queue depth.
Problems Fixed:
Known Issues:
None
Updating firmware with rpm installed:
# ./CP030722.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/hp-firmware-smartarray-46a4d957a7-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
8.00
Last Recommended or Critical Version:
8.00
Previous Version of Firmware:
7.02
Firmware Dependency:
None
Enhancements/New Features:
Increased performance of SATA drives by increasing command queue depth.
Problems Fixed:
Known Issues:
None
Updating firmware with rpm installed:
# ./CP032503.scexe in the '/usr/lib/i386-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/i386-linux-gnu/hp-firmware-smartarray-112204add8-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Deliverable Name:
Supplemental Update / Online ROM Flash Component for Linux - Smart Array P230i, P430, P431, P731m, P830i, and P830
Release Version and/or Date:
4.10
Last Recommended or Critical Version:
4.04
Previous Version of Firmware:
4.04
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Version 4.10
If an unexpected power outage occurred, the system might stop operating during Power-On Self Test
Controller could stop responding when Smart Cache is performing a read operation
Known Issues:
None
]]>
Updating firmware with rpm installed:
# ./CP032501.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/hp-firmware-smartarray-112204add8-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
4.10
Last Recommended or Critical Version:
4.04
Previous Version of Firmware:
4.04
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Version 4.10
If an unexpected power outage occurred, the system might stop operating during Power-On Self Test
Controller could stop responding when Smart Cache is performing a read operation
Known Issues:
None
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Release Version and/or Date:
15.10.10.00
Last Recommended or Critical Version:
15.10.09.00
Previous Version of Firmware:
15.10.09.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed in version 15.10.10.00:
Known Issues:
None
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
# ./CP031279.scexe in the '/usr/lib/i386-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/i386-linux-gnu/hp-firmware-cf8a9ebb5d-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
15.10.10.00
Last Recommended or Critical Version:
15.10.09.00
Previous Version of Firmware:
15.10.09.00
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed in version 15.10.10.00:
Known Issues:
None
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
# ./CP031281.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/hp-firmware-cf8a9ebb5d-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
15.10.10.00
Last Recommended or Critical Version:
15.10.09.00
Previous Version of Firmware:
15.10.09.00
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed in version 15.10.10.00:
Known Issues:
None
Release Version and/or Date:
3.30
Last Recommended or Critical Version:
3.30
Previous Version of Firmware:
3.14
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
3.30
Last Recommended or Critical Version:
3.30
Previous Version of Firmware:
3.14
Firmware Dependency:
None
None
]]>Updating firmware with rpm installed:
# ./CP0xxxxx.scexe in the '/usr/lib/i386-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/i386-linux-gnu/hp-firmware-d3600-d3700-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
-d, --discover <file> Dumps discovery information in XML format to <file>
-e, --reflash Flash even if the device is already up to date
-f, --force Always flash applicable devices (same as -e -g)
-g, --downgrade Flash if the device has a later firmware
-s, --silent Do not display any text
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Updating firmware with rpm installed:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/hp-firmware-d3600-d3700-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
-d, --discover <file> Dumps discovery information in XML format to <file>
-e, --reflash Flash even if the device is already up to date
-f, --force Always flash applicable devices (same as -e -g)
-g, --downgrade Flash if the device has a later firmware
-s, --silent Do not display any text
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE:All firmware flash progress messages are logged to /var/cpq/Verbose.log and flash summary is logged to /var/cpq/Component.log.
]]>Updating firmware with rpm installed:
# ./CP0xxxxx.scexe in the '/usr/lib/i386-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/i386-linux-gnu/hp-firmware-smartarray-d6000-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
-d Dumps discovery information in XML format to <file>
-e Flash even if the device is already up to date
-f Always flash applicable devices (same as -e -g)
-g Flash if the device has a later firmware
-s Do not display any text
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
IMPORTANT: Power up/down sequence is important to maintain integrity of the configuration, please refer to "HP D6000 Disk Enclosure User Guide" document for more details.
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE:All firmware flash progress messages are logged to /var/cpq/Verbose.log and flash summary is logged to /var/cpq/Component.log.
]]>Updating firmware with rpm installed:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/hp-firmware-smartarray-d6000-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
-d Dumps discovery information in XML format to <file>
-e Flash even if the device is already up to date
-f Always flash applicable devices (same as -e -g)
-g Flash if the device has a later firmware
-s Do not display any text
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
IMPORTANT: Power up/down sequence is important to maintain integrity of the configuration, please refer to "HP D6000 Disk Enclosure User Guide" document for more details.
]]>http://www.hpe.com/storage/spock/
The HPE supplied QLogic driver and enablement kit must be installed prior to this firmware component being identified by HP SUM for deployment. The software is available in the Service Pack for ProLiant 2016.10.0, which is available at http://www.hpe.com/servers/spp/download:
SUSE Linux Enterprise Server 11 (x86) FCoE/FC Driver Kit for HPE Qlogic CNAs, HBAs and mezzanine HBAs, version 8.07.00.34.11.3-k
]]>
NOTE: During the flash operation, the message "No Adapter Found!" may appear in the logs. These messages do not indicate a problem with the firmware flash operation and may be ignored.
]]>http://www.hpe.com/storage/spock/
The HPE supplied QLogic driver and enablement kit must be installed prior to this firmware component being identified by HP SUM for deployment. Use the appropriate software included in the Service Pack for ProLiant 2016.10.0, which is available at www.hpe.com/servers/spp/download
Red Hat Enterprise Linux 6 Server (x86-64) FCoE/FC Driver Kit for HPE Qlogic CNAs, HBAs and mezzanine HBAs, version 8.07.00.34.06.0-k4
Red Hat Enterprise Linux 7 Server FCoE/FC Driver Kit for HPE QLogic CNAs, HBAs and mezzanine HBAs and CNAs, version 8.07.00.34.07.0-k4
SUSE Linux Enterprise Server 11 (AMD64/EM64T) FCoE/FC Driver Kit for HPE Qlogic CNAs, HBAs and mezzanine HBAs, version 8.07.00.34.11.3-k
SUSE Linux Enterprise Server 12 FCoE/FC Driver Kit for HPE QLogic CNAs, HBAs and mezzanine HBAs and CNAs version 8.07.00.34.12.0-k1
NOTE: During the flash operation, the message "No Adapter Found!" may appear in the logs. These messages do not indicate a problem with the firmware flash operation and may be ignored.
]]>http://www.hpe.com/storage/spock/
The HPE supplied Emulex driver and enablement kit must be installed prior to this firmware component being identified by HP SUM for deployment. The driver and enablement kit are available on the HPE.com website which is available at http://www.hpe.com/.
Linux FC Driver Kit for HPE Branded Emulex FC HBAs and mezz cards, version 11.1.183.21, for RedHat 6, RedHat 7, and Novell SUSE 11, SUSE12
HPE Fibre Channel Enablement Kit for Linux, HP-CNA-FC-Emulex_Enablement-Kit, version 11.1.183.22-1
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
Install the FC Driver Kit, reboot, and then install the Enablement Kit.
Additional requirements:
Environment must be running the syslog daemon for the flash engine to run
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs
http://www.hpe.com/storage/spock/
The HPE supplied Emulex driver and enablement kit must be installed prior to this firmware component being identified by HP SUM for deployment. The driver and enablement kit are available on the HPE.com website which is available at http://www.hpe.com/.
Linux FC Driver Kit for HPE Branded Emulex FC HBAs and mezz cards, version 11.1.183.21, for RedHat 6, RedHat 7, and Novell SUSE 11, SUSE12
HPE Fibre Channel Enablement Kit for Linux, HP-CNA-FC-Emulex_Enablement-Kit, version 11.1.183.22-1
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
Install the FC Driver Kit, reboot, and then install the Enablement Kit.
Additional requirements:
Environment must be running the syslog daemon for the flash engine to run
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs
http://www.hpe.com/storage/spock/
The HPE supplied NIC driver must be installed prior to this firmware component if you want to update the firmware for the CNA. The driver is available on the HPE.com website at http://www.hpe.com/.
HPE Emulex 10Gbe Driver for Linux, version 11.1.183.21
Additional requirements:
The target environment must have the libsysfs or sysfsutils package installed prior to the installation of the firmware update kit. If not already present, the libsysfs or sysfsutils package can be obtained from the operating system installation media.
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs/CNAs
Environment must be running the syslog daemon for the flash engine to run
Note: To enable the FCoE/iSCSI protocol on devices that support it, please install the appropriate HPE supplied Emulex FCoE/iSCSI driver. The FCoE protocol also requires the HPE Emulex Enablement Kit be installed. The driver and enablement kit are also available on the HPE.com website at http://www.hpe.com/.
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
Install the FC/FCoE Driver Kit, reboot, and then install the Enablement Kit.
]]>http://www.hpe.com/storage/spock/
The HPE supplied NIC driver must be installed prior to this firmware component if you want to update the firmware for the CNA. The driver is available on the HPE.com website at http://www.hpe.com/.
HPE Emulex 10Gbe Driver for Linux, version 11.1.183.21
Additional requirements:
The target environment must have the libsysfs or sysfsutils package installed prior to the installation of the firmware update kit. If not already present, the libsysfs or sysfsutils package can be obtained from the operating system installation media.
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs/CNAs
Environment must be running the syslog daemon for the flash engine to run
Note: To enable the FCoE/iSCSI protocol on devices that support it, please install the appropriate HPE supplied Emulex FCoE/iSCSI driver. The FCoE protocol also requires the HPE Emulex Enablement Kit be installed. The driver and enablement kit are also available on the HPE.com website at http://www.hpe.com/.
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
Install the FC/FCoE Driver Kit, reboot, and then install the Enablement Kit.
]]>Update the firmware and software in the usual manner.
]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>
Update the firmware and software in the usual manner.
]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>
Update the firmware and software in the usual manner.
]]>
Update the firmware and software in the usual manner.
]]>
Update the firmware and software in the usual manner.
]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Updating firmware with rpm installed:
# ./CP027852.scexe in the '/usr/lib/i386-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/i386-linux-gnu/hp-firmware-smartarray-c85df48e20-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Problems Fixed in version 0.50 (C):
Known Issues:
None
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Problems Fixed in version 0.50 (C):
Known Issues:
None
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.
Update the firmware and software in the usual manner.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.
Update the firmware and software in the usual manner.
Installation Notes for using the component as a standalone component
This SCEXE component is a self-extracting executable. The SCEXE file unpacks itself, flashes the firmware on the HPE BladeSystem c-Class Onboard Administrator, and cleans up.
The general command line syntax for this smart component is
sh cpxxxxxx.scexe -target <netAddress> -user <username> -passwd <password> [-s[ilent]] [-f[orce]] [-logdir <path>]
where cpxxxxxx.scexe represents the filename of the component
NOTE: All arguments and information enclosed in brackets are optional. If required arguments are not included on the command line, you will be prompted to provide the input.
To flash the firmware:
The return codes are:
Installation Notes for using the component with HP Smart Update Manager and the SPP
Installation Notes for using the firmware extracted from the component
The user guide for the Onboard Administrator is located here.
The user guide for the Onboard Administrator command line interface is located here.
HPE BladeSystem c-Class OA Firmware
Release Version
Version 4.70
Previous Version of Firmware
Version 4.60
Upgrade Requirements
Optional - Update to this firmware version if any documented fixes or enhanced functionality provided by this version would be useful to your system.
Firmware Dependency
For firmware compatibility information,see the HP Service Pack for ProLiant Information Library at:
http://www.hpe.com/info/spp/documentation
Important Notes
Starting OA 4.50 release, a standardized code signing and validation mechanism has been introduced to enhance the firmware image authenticity.
For customers using Firmware ROM image to upgrade OA:
For OA with firmware version less than 3.50, first update to OA 3.50 and then continue updating to OA 4.50 or above.
For customers using Smart Components to upgrade OA:
OA firmware update mechanisms which rely on HP Smart Components (example: EFM), will not be affected by this change. The Smart Component will automatically perform the intermediate upgrade to OA 3.50 before performing the OA 4.50 or above upgrade.
Flash Disaster Recovery to a version of firmware 4.50 or above issupported. The behavior is seen due to the implementation of a new firmware image signing mechanism in OA firmware version 4.50 and above, which causes the FDR mechanism to see the firmware image as an invalid image.
The workaround for this is to use Flash Disaster Recovery procedure to recover to a version of firmware prior to 4.50 and then do a firmware upgrade to the intended version (4.50 or later).
The OA only supports SPP ISO images that are less than 4GB in size, whether hosted directly via the Enclosure DVD feature or an attached USB key, or mounted remotely via a specified URL. If an ISO image exceeds 4 GB, the CLI SHOW FIRMWARE MANAGEMENT command displays ISO URL Status as “Invalid URL.”
If an SPP ISO image exceeds 4 GB, it is necessary to create a custom ISO image that excludes components unnecessary to the OA EFM blade firmware update process. At a minimum, the custom ISO must contain the firmware components for HP ProLiant BL servers. (When using HP SUM to create the custom ISO image, select Firmware as the Component Type, and select HP ProLiant BL Series as the Server Type.) For information about creating a custom ISO image compatible for OA EFM functionality, see the HP BladeSystem Onboard Administrator User Guide. More HP SUM information can be found via HP Smart Update Manager online help or at the HP Smart Update Enterprise Information Library (http://www.hpe.com/info/hpsum/documentation).
Onboard Administrator 4.40 has received FIPS 140-2 Certification. For more information, see the NIST CSRC Cryptographic Module Validation Program webpage (http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140val-all.htm#2587)
When the Enable DHCPv6, Enable Router Advertisements, or Enable SLAAC enclosure IPv6 settings are disabled on the Onboard Administrator, the respective DHCPv6 or SLAAC addresses of the iLOs in the enclosure are retained until these addresses expire automatically based on their respective configurations. A manual reset of the iLO releases these addresses immediately.
]]>In conjunction with the Smart Update Manager found on the SPP, the component can be used to deploy the firmware to the HPE BladeSystem c-Class Virtual Connect module.
Firmware extracted from the component can be deployed using the Virtual Connect Support Utility for the HPE BladeSystem c-Class Virtual Connect modules.
Installation Notes for using the component with HP Smart Update Manager and SPP
Installation Notes for using the firmware extracted from the component
Extract the firmware binary out of the component.
Place the firmware image file onto a system on the same network as the HPE BladeSystem c-Class Virtual Connect module.
Start the Virtual Connect Support Utility and deploy the firmware.
HPE requires using the HPE BladeSystem c-Class Virtual Connect Support Utility version 1.13.0 (or higher) to install the HPE VC FlexFabric-20/40 F8 version 4.60, HPE VC Flex-10/10D version 4.60, HPE VC FlexFabric 10Gb/24-port version 4.60, HPE VC Flex-10 10Gb version 4.60, HPE VC 8Gb 24-Port FC version 3.08, HPE VC 16Gb 24-Port FC version 3.08, and HPE VC 8Gb 20-Port FC version 2.15 firmware. Please read the HPE BladeSystem c-Class Virtual Connect Support Utility release notes.
Please be advised of a serious issue that could cause network outage when upgrading directly from VC 2.xx release version to VC 4.60 release in Multi-Enclosure environment. Please upgrade from VC 2.xx to VC 3.70 or VC 4.10 first and then upgrade from VC 3.70 or VC 4.10 to VC 4.50 then upgrade from VC 4.50 to VC 4.60 in a Multi-Enclosure setup.
To update HPE VC 8Gb 24-Port FC module(s) from Virtual Connect firmware 4.31 or lower to Virtual Connect 4.60 or higher, these module(s) must first be updated with either Virtual Connect firmware version 4.4x or version 4.50 (Recommended version is 4.50) before they can be updated with Virtual Connect 4.60 or higher.
The USB Key Utility is used to copy the SPP onto a portable USB key storage device. Please note that the latest version (v2.0.0.0) of the utility is now 64-bit only. If the 32-bit application is needed, please use version 1.8, however, this version will not work on an ISO image greater than 4GB.
Note: Please read the Important note section of the Release Notes for firmware upgrade instructions.
]]>
To update firmware from Linux operating system on target server:
Updating firmware without installing the rpm
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system.
HP recommends for remote deployment of this package that you obtain the most recent version of the HP Service Pack for ProLiant (SPP) and follow these steps:
Enhancements/New Features for FW version 4.2.2.0:
Made changes to firmware to capture more debug information.
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Enhancements/New Features for HPDG (B):
Problems Fixed:
Problems Fixed for HPDG (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDK
Last Recommended or Critical Version:
HPDK
Previous Version of Firmware:
HPDJ
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPDK (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
HPDB
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPDB (B):
Problems Fixed:
Problems Fixed for HPDB (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Enhancements/New Features for HPDA (B):
Problems Fixed:
Problems Fixed for HPDA (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD6 (B):
Problems Fixed:
Problems Fixed for HPD6 (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Problems Fixed for HPD8 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDE
Last Recommended or Critical Version:
HPDE
Previous Version of Firmware:
HPDC
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPDE (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPD9 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD8 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features for HPD9 (B):
Problems Fixed:
Problems Fixed for HPD9 (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Enhancements/New Features for HPDD (B):
Problems Fixed:
Problems Fixed for HPDD (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD5 resolves this issue.
Problems Fixed for HPD5 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD9 (B):
Problems Fixed:
Problems Fixed for HPD9 (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD7 (B):
Problem Fixed:
Problems Fixed for HPD7 (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancments/New Features:
None
Problems Fixed:
Problems Fixed for HPD4 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPD9
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPDA.
This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Enhancements/New Features HPD2(B):
Problems Fixed for HPD2 (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPDA (B):
Problems Fixed:
Problems Fixed for HPDA (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD6 (B):
Problem Fixed:
Problems Fixed for HPD6 (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Problems Fixed for HPD9 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDK
Last Recommended or Critical Version:
HPDK
Previous Version of Firmware:
HPDJ
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
HPDB
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD5 resolves this issue.
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPGD
Last Recommended or Critical Version:
HPGD
Previous Version of Firmware:
HPGC
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problem Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancments/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPD9
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPDA.
This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGH
Last Recommended or Critical Version:
HPGH
Previous Version of Firmware:
HPGG
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPGK
Last Recommended or Critical Version:
HPGK
Previous Version of Firmware:
HPGJ
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problem Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Known Issues:
None
Release Version and/or Date:
HPGE
Last Recommended or Critical Version:
HPGE
Previous Version of Firmware:
HPGC
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG9
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG9
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Known Issues:
None
Enhancements/New Features:
Problems fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDE
Last Recommended or Critical Version:
HPDE
Previous Version of Firmware:
HPDC
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPD4 (B):
Linux Smart Component fails to update the firmware for drives connected behind an HP Smart Array P431 controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.
Problems Fixed for HPD4 (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG4 (C):
Problems Fixed:
Problems Fixed for HPG4 (D):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features for (C):
Problems Fixed:
Problems Fixed for HPG4 (D):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG4 (C):
Problems Fixed:
Problems Fixed for HPG4 (D):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for (C):
Problems Fixed:
Problems Fixed for HPG6 (D):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGK
Last Recommended or Critical Version:
HPGK
Previous Version of Firmware:
HPGJ
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPG4 (D):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGE
Last Recommended or Critical Version:
HPGE
Previous Version of Firmware:
HPGC
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG9
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for (C):
Problems Fixed:
Problems Fixed for HPG9 (D):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG9
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG9 (C):
Problems Fixed:
Problems Fixed for HPG9 (D):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGH
Last Recommended or Critical Version:
HPGH
Previous Version of Firmware:
HPGG
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGD
Last Recommended or Critical Version:
HPGD
Previous Version of Firmware:
HPGC
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for (C):
Problems Fixed:
Problems Fixed for HPGD (D):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problem Fixed:
Problems Fixed for HPG5 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problem Fixed:
Problems Fixed for HPG5 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Problems Fixed for HPD1 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Problems Fixed for HPD7 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPD4 (B):
Known Issues:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPD4 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed for HPG2 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features for HPG4 (B):
Problems Fixed:
Problems Fixed for HPG4 (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problem fixed in HPG1(B):
Known Issues:
None
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPG1 (B):
Known Issues:
None
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD8 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPG3 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Problems Fixed for HPG3 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPD2 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed for HPD7 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPG7 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPG7 (C):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
Version HPD4 prevents the potential for incorrect data to be written to the drive under extremely rare circumstances when the drive experiences a hard reset. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Problems Fixed for HPD4 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD2 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Problems Fixed for HPG1 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPD3 (B):
Known Issues:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Problems Fixed for HPD4 (B):
Linux Smart Component fails to update the firmware for drives connected behind an HP Smart Array P431 controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.
Problems Fixed for HPD4 (C):
Known Issues:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Problems Fixed for HPD5 (B):
Known Issues:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
The expected time to completion of Sanitize, Format and DST operations was incorrectly reported in the Vital Products Data page D0h. If time to completion is used by an application to determine when to terminate an operation, the operation might be terminated before the operation completed. Firmware version HPD4 now correctly reports the expected time to completion for these operations.
Problems Fixed for HPD4 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPG3 (B):
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPD5. This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
Known Issues:
None
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Improves the drive idle time behavior by reducing long periods of track dwell time, which if not implemented, could increase media lube depletion and reduce drive reliability.
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Improves the drive idle time behavior by reducing long periods of track dwell time, which if not implemented, could increase media lube depletion and reduce drive reliability.
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPD1. This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
Known Issues:
None
Remote Online:
To update the driver using VMware tools:
Note: The version of the installed driver will be 5.5.0.124-1
]]>Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
Note: Older firmware versions were not tested with this release.
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
]]>
To update the driver using VMware tools:
]]>
To update the driver using VMware tools:
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
]]>
To install this driver using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this driver using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this driver using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this driver using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this driver using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this driver using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this driver using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this driver using VMware tools:
To install this driver using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this driver using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this driver using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this driver using VMware tools:
To install this driver using VMware tools:
To install this driver using VMware tools:
To install this driver using VMware tools:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
]]>
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
]]>
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
1. The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) must be installed and running.
The minimum iLO version for ESXi 5.1, 5.5 and ESXi 6.0 is 1.4.
2. The “Compaq ROM Utility Driver” (CRU) must be installed and running
The minimum CRU version for ESXi 5.1 is 5.0.3.9.
The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8.
]]>The minimum CRU version for ESXi 5.5 is 5.5.4.1.
The minimum CRU version for ESXi 6.0 is 6.0.8
Offline:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
| ja |
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Offline:
Remote Online:
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hp.com/go/ilo
Select your lights-out product, then support & documents, then manuals.
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| HP Ethernet 1Gb 2-port 330i Adapter (18D2) | 1.65 | 17.2.1 | 1.3.16 | n/a | 17.2.0 |
| HP Ethernet 1Gb 2-port 330i Adapter (22BD) | 2.10 | 17.4.1 | |||
| HP Ethernet 1Gb 4-port 331i Adapter (22BE) HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331T Adapter |
1.46 | 17.4.1 | |||
| HP Ethernet 1Gb 4-port 331i Adapter (3372) HP Ethernet 1Gb 4-port 331i-SPI Adapter |
1.46 | n/a | |||
| HP Ethernet 1Gb 2-port 332i Adapter (2133) | 1.39 | n/a | |||
| HP Ethernet 1Gb 2-port 332i Adapter (22E8) HP Ethernet 1Gb 2-port 332T Adapter |
1.39 | 17.4.1 |
]]>
| NIC | Boot Code Version | PXE Version | UEFI Version | iSCSI Version | FCoE Version | CCM Version | L2 Version |
| HP Flex-10 10Gb 2-port 530FLB Adapter HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter HP Flex-10 10Gb 2-port 530M Adapter HP Ethernet 10Gb 2-port 530SFP+ Adapter HP Ethernet 10Gb 2-port 530T Adapter |
7.13.75 | 7.14.5 | 7.14.65 | n/a | n/a | 7.14.3 | 7.12.25 |
|
HP Ethernet 10Gb 2-port 533FLR-T Adapter |
7.13.75 | 7.14.5 | 7.14.65 | 7.14.0 | 7.14.3 | 7.14.3 | 7.12.25 |
| NIC | Boot Code Version | PXE Version | iSCSI Version | NCSI Version |
| HP NC382i Integrated Dual Port Multifunction Gigabit Server Adapter | 5.2.3 | n/a | 7.4.2 | 2.0.12 |
| HP NC532m Dual Port 10GbE Multifunction BL-c Adapter | 6.2.28 | 7.0.53 | 7.4.2 | n/a |
| HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (3654) | 6.2.28 | n/a | 3.1.5 | n/a |
| HP NC532i Dual Port 10GbE Multifunction BL-c Adapter (7058) | 6.2.28 | n/a | 4.2.10 | n/a |
]]>
| NIC | Boot Code (MFW) Version | UEFI Version | PXE Version |
| HPE Ethernet 4x25Gb 1-port 620QSFP28 Adapter | 8.11.1.0 | 4.0.0.9 | 1.0.17 |
]]>
| NIC | EEPROM/NVM Version | OROM Version |
|---|---|---|
| HP Ethernet 1Gb 2-port 361i Adapter | 80000CD5 | 1.1446.0 |
| HP Ethernet 1Gb 2-port 361FLB Adapter | 80000DB4 | |
| HP Ethernet 1Gb 2-port 361T Adapter | 80000E0D | |
| HP Ethernet 1Gb 2-port 363i Adapter | 80000D00 | |
| HP Ethernet 1Gb 1-port 364i Adapter | 80000BEE | |
| HP Ethernet 1Gb 4-port 366FLR Adapter | 80000DCF | |
| HP Ethernet 1Gb 4-port 366i Adapter | 80000E24 | |
| HP Ethernet 1Gb 4-port 366M Adapter | 80000DA9 | |
| HP Ethernet 1Gb 4-port 366T Adapter | 80000DC6 | |
| HP Ethernet 1Gb 2-port 367i Adapter | 80000C72 | |
| HP Ethernet 10Gb 2-port 560FLB Adapter | 800008C7 | |
| HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter | 80000838 | |
| HP Ethernet 10Gb 2-port 560SFP+ Adapter | 80000835 | |
| HP Ethernet 10Gb 2-port 560M Adapter | 8000083D | |
| HP Ethernet 10Gb 2-port 561FLR-T Adapter | 800005B6 | |
| HP Ethernet 10Gb 2-port 561T Adapter | 800005D3 | |
| HP Ethernet 10Gb 2-port 562i Adapter | 800006FC | |
| HPE Ethernet 1Gb 4-port 366i Communication Board | 80000EBF | |
| HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter | 800029F7 | 1.1375.0 |
| HPE Ethernet 10Gb 2-port 562SFP+ Adapter | 800029F6 |
The combo image v1.1446.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v7.3.20, 10GbE - v5.0.20, 40GbE - v1.9.27.
The combo image v1.1375.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v6.9.13, 10GbE - v5.0.20, 40GbE - v1.5.14.
]]>Note: While updating firmware using HPSUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HP Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the mst module is loaded already: vmkload_mod -l | grep mst
If module is not loaded, use the command to load the module: vmkload_mod mst
From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system, if required, for the firmware update to take effect
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544M Adapter (644161-B21) | 2.36.5000 | HP_0240230019 |
| HP InfiniBand QDR/EN 10Gb Dual Port 544M Adapter (644160-B21) | 2.36.5000 | HP_0250230018 |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter (649281-B21) | 2.36.5000 | HP_0280210019 |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter (649282-B21_Cx and 649282-B21_B2) | 2.36.5000 | HP_0230240019 HP_0230220019 |
| HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter (649283-B21_Cx and 649283-B21_B2) | 2.36.5000 | HP_0230240009 HP_0230220009 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.36.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.36.5000 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.36.5000 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.36.5000 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.36.5000 | HP_1390110023 |
]]>
Note: While updating firmware using HPSUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HP Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the mst module is loaded already: vmkload_mod -l | grep mst
If module is not loaded, use the command to load the module: vmkload_mod mst
From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system, if required, for the firmware update to take effect
| InfiniBand Card Type | Firmware Version | PSID |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544M Adapter (644161-B21) | 2.36.5000 | HP_0240230019 |
| HP InfiniBand QDR/EN 10Gb Dual Port 544M Adapter (644160-B21) | 2.36.5000 | HP_0250230018 |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter (649281-B21) | 2.36.5000 | HP_0280210019 |
| HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter (649282-B21_Cx and 649282-B21_B2) | 2.36.5000 | HP_0230240019 HP_0230220019 |
| HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter (649283-B21_Cx and 649283-B21_B2) | 2.36.5000 | HP_0230240009 HP_0230220009 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.36.5000 | HP_1350110023 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.36.5000 | HP_1360110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.36.5000 | HP_1370110017 |
| HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.36.5000 | HP_1380110017 |
| HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.36.5000 | HP_1390110023 |
Note: While updating firmware using HPSUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HP Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the mst module is loaded already: vmkload_mod -l | grep mst
If module is not loaded, use the command to load the module: vmkload_mod mst
From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system, if required, for the firmware update to take effect
| InfiniBand Card Type | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.36.5000 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.36.5000 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.14.2204 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.14.2204 | HP_2420110034 |
]]>
Note: While updating firmware using HPSUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HP Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the mst module is loaded already: vmkload_mod -l | grep mst
If module is not loaded, use the command to load the module: vmkload_mod mst
From the same directory, execute the Smart Component. For example: ./CPXXXXXX.scexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system, if required, for the firmware update to take effect
| InfiniBand Card Type | Firmware Version | PSID |
| HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.36.5000 | HP_1200111023 |
| HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.36.5000 | HP_2240110004 |
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
To use HP Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Firmware Dependency:
None
Enhancements/New Features:
Increased performance of SATA drives by increasing command queue depth.
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
]]>
Release Version and/or Date:
4.10
Last Recommended or Critical Version:
4.04
Previous Version of Firmware:
4.04
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Version 4.10
If an unexpected power outage occurred, the system might stop operating during Power-On Self Test
Controller could stop responding when Smart Cache is performing a read operation
Known Issues:
None
]]>
WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE:All firmware flash progress messages are logged to /var/cpq/Verbose.log and flash summary is logged to /var/cpq/Component.log.
]]>NOTES:
OPTIONS for in band enclosure flash
-d Dumps discovery information in XML format to <file>
-e Flash even if the device is already up to date
-f Always flash applicable devices (same as -e -g)
-g Flash if the device has a later firmware
-s Do not display any text
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Remote Online:
IMPORTANT: Power up/down sequence is important to maintain integrity of the configuration, please refer to "HP D6000 Disk Enclosure User Guide" document for more details.
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE:All firmware flash progress messages are logged to /var/cpq/D3000.log and flash summary is logged to /var/cpq/Component.log.
]]>NOTES:
OPTIONS for in band enclosure flash
-d, --discover <file> Dumps discovery information in XML format to <file>
-e, --reflash Flash even if the device is already up to date
-f, --force Always flash applicable devices (same as -e -g)
-g, --downgrade Flash if the device has a later firmware
-s, --silent Do not display any text
To use HP Smart Update Manager from the HP Service Pack for ProLiant:
Offline:
Remote Online:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
]]>
Problems Fixed in version 3.30:
Known Issues:
None
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
To update firmware from VMware ESXi operating system on target server:
To update firmware from VMware ESXi operating system on target server:
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Enhancements/New Features:
Enhancements/New Features for HPDG (D):
Enhancements/New Features for HPDG (E):
Problems Fixed:
Problems Fixed for HPDG (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPDK
Last Recommended or Critical Version:
HPDK
Previous Version of Firmware:
HPDJ
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPDK (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
HPDB
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPDB (D):
Enhancements/New Features for HPDB (E):
Problems Fixed:
Problems Fixed for HPDB (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Enhancements/New Features:
Enhancements/New Features for HPDA (E):
Enhancements/New Features for HPDA (F):
Problems Fixed:
Problems Fixed for HPDA (G):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD6 (D):
Enhancements/New Features for HPD6 (E):
Problems Fixed:
Problems Fixed for HPD6 (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
Problems Fixed for HPD8 (C):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPDE
Last Recommended or Critical Version:
HPDE
Previous Version of Firmware:
HPDC
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPDE (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPD9 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPD4 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD8 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Enhancements/New Features for HPD9 (D):
Enhancements/New Features for HPD9 (E):
Problems Fixed:
Problems Fixed for HPD9 (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Enhancements/New Features:
Enhancements/New Features for HPDD (D):
Enhancements/New Features for HPDD (E):
Problems Fixed:
Problems Fixed for HPDD (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Enhancements/New Features:
None
Problems Fixed:
HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD5 resolves this issue.
Problems Fixed for HPD5 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD9 (D):
Enhancements/New Features for HPD9 (E):
Problems Fixed:
Problems Fixed for HPD9 (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD7 (D):
Enhancements/New Features for HPD7 (E):
Problem Fixed:
Problems Fixed for HPD7 (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancments/New Features:
None
Problems Fixed:
Problems Fixed for HPD4 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPD9
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPDA.
This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD2 (B):
Enhancements/New Features for HPD2 (C):
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPDA (C):
Enhancements/New Features for HPDA (D):
Problems Fixed:
Problems Fixed for HPDA (E):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPD6 (D):
Enhancements/New Features for HPD6 (E):
Problem Fixed:
Problems Fixed for HPD6 (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Problems Fixed for HPD9 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPGD
Last Recommended or Critical Version:
HPGD
Previous Version of Firmware:
HPGC
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPGD(F):
Updated the flash engine to standardize logging across all SATA drive components.
Enhanced logging capability to improve the details provided in the component log file.
Problems Fixed:
After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPGD prevents this condition from occurring.
Problems Fixed for HPGD (G):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPGH
Last Recommended or Critical Version:
HPGH
Previous Version of Firmware:
HPGG
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG4 (E):
Updated the flash engine to standardize logging across all SATA drive components.
Enhanced logging capability to improve the details provided in the component log file.
Problems Fixed:
Problems Fixed for HPG4 (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG4 (E):
Problems Fixed:
Problems Fixed for HPG4 (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features for HPG5 (B):
Problem Fixed:
Problems Fixed for HPG5 (C):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG4 (E):
Problems Fixed:
Problems Fixed for HPG4 (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features for HPG5 (B):
Problem Fixed:
Problems Fixed for HPG5 (C):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG6 (E):
Problems Fixed:
Problems Fixed for HPG6 (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPGK
Last Recommended or Critical Version:
HPGK
Previous Version of Firmware:
HPGJ
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG4 (C):
Problems Fixed:
Problems Fixed for HPG4 (D):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPGE
Last Recommended or Critical Version:
HPGE
Previous Version of Firmware:
HPGC
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG9
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG9 (E):
Problems Fixed:
Problems Fixed for HPG9 (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG9
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Enhancements/New Features for HPG9 (E):
Problems Fixed:
Problems Fixed for HPG9 (F):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features for HPD1(B):
Problem Fixed:
Problems Fixed for HPD1 (C):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Problems Fixed for HPD7 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPD4 (B):
Known Issues:
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPD4 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPG4 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPG1 (C):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed:
Problems Fixed for HPD3 (B):
Known Issues:
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
Problems Fixed for HPD4 (B):
Known Issues:
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
Problems Fixed for HPD5 (B):
Known Issues:
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
The expected time to completion of Sanitize, Format and DST operations was incorrectly reported in the Vital Products Data page D0h. If time to completion is used by an application to determine when to terminate an operation, the operation might be terminated before the operation completed. Firmware version HPD4 now correctly reports the expected time to completion for these operations.
Problems Fixed for HPD4 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD8 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPG3 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
Problems Fixed for HPG3 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPD2 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed for HPD7 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPG7 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPG7 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Enhancements/New Features:
None
Problems Fixed:
Version HPD4 prevents the potential for incorrect data to be written to the drive under extremely rare circumstances when the drive experiences a hard reset. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Problems Fixed for HPD4 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
None
Problem Fixed:
Problems Fixed for HPD1 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Enhancements/New Features:
Problems Fixed:
Problems Fixed for HPD2 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Problems Fixed for HPG3 (B):
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPD5. This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
Known Issues:
None
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPS5
Last Recommended or Critical Version:
HPS5
Previous Version of Firmware:
HPS4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/server/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Improves the drive idle time behavior by reducing long periods of track dwell time, which if not implemented, could increase media lube depletion and reduce drive reliability.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Improves the drive idle time behavior by reducing long periods of track dwell time, which if not implemented, could increase media lube depletion and reduce drive reliability.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Place the HP Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.
Boot from the newly created HP Service Pack for ProLiant USB key.
Follow HP Smart Update Manager steps to complete firmware update.
Remote Online:
Download the appropriate SPP.
Add the component to the SPP.
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
Run HP SUM.
Add the ESXi host to be updated as a remote target/node.
Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps and complete the firmware update.
Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
To use HP Insight Control for vCenter :
Log in to the vSphere Client.
Select a server or cluster in the inventory tree.
Click the HP Insight Management tab.
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable Tech Support Mode on the ESXi host.
Login as root. (You must be root in order to apply the update.)
Place the Smart Component zip file in a temporary directory.
Unzip the file CPXXXXXX.zip
Ensure that CPXXXXXX.vmexe is executable by using the command:
chmod +x CPXXXXXX.vmexe
From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout
Disable Tech Support Mode on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD0
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/servers/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://www.hpe.com/server/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG0
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Reboot your system, if required, for the firmware update to take effect.
]]>Enhancements/New Features:
None
Problems Fixed:
This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPD1. This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
Known Issues:
None