Added support for SUSE Linux Enterprise Server 12 SP2.

]]> Reduce debug output from optical devices to filter out unwanted messages and retain only the critical data.

]]> Added support for SUSE LINUX Enterprise Server 12 SP2.

]]> When a controller lock-up occurs, the controller now generates an NMI, which results in more diagnostic information in the AHS logs to better identify the cause of the lock-up.

 

]]> Improved Performance levels.

Added support for SUSE Linux Enterprise Server 12 SP2.

]]>  

Added SUSE Linux Enterprise Server 12 SP1 support.

]]> Added support for SUSE Linux Enterprise Server 12 SP2.

]]>  

Added HPE digital signatures to RPM packages and included kernel objects. No functional changes were made to the driver.
If driver version 15.10.04.00-7 is installed on the target system, then it is not necessary to update to driver version 15.10.04.00-7(A). 

]]> Updated to version 8.07.00.34.12.0-k1

Added support for SLES 12 SP2 OS

Added support for Private link statistics counters.

Added support for the following devices:

  • HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
  • HPE StoreFabric SN1100Q 16Gb 2P FC HBA
  • HPE StoreFabric SN1100Q 16Gb 1P FC HBA
  • HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter
]]> This driver version resolves the following:

  • corrected issue where scsi status was getting overwritten.
  • set relogin flag when failed to queue login requests.
  • set echo test mailbox command option bit15 correctly.
  • corrected FDMI vendor port state value.
  • corrected warnings reported by static checker.
  • race condition in handling rport deletion during recovery.

 

 

]]> Updated to version 8.07.00.34.12.0-k1

Added support for Private link statistics counters.

Added support for the following devices:

  • HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
  • HPE StoreFabric SN1100Q 16Gb 2P FC HBA
  • HPE StoreFabric SN1100Q 16Gb 1P FC HBA
  • HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter
]]> This driver version resolves the following:

  • corrected issue where scsi status was getting overwritten.
  • set relogin flag when failed to queue login requests.
  • set echo test mailbox command option bit15 correctly.
  • corrected FDMI vendor port state value.
  • corrected warnings reported by static checker.
  • race condition in handling rport deletion during recovery.

 

 

]]> This product addresses an issue where the ocsbbd daemon must be started after rpm installation.

This product addresses an issue where there is a discrepancy in the display of the NIC firmware version and serial number on the Active Health System (AHS) Dashboard.

]]> This product now supports Red Hat Enterprise Linux 7 Update 2.

This product now supports SUSE Linux Enterprise Server 12 SP1.

This product now reports Physcal Function (PF) and Virtual Function (VF) in same SR-IOV pool.

]]> This product will now be installed by the HPE Smart Update Manager (HPSUM) only when supported Intel adapters are present on the server.

This product now reports status as "skipped" instead of "failed" when there are no devices to monitor.

]]> Added support for new HPE ProLiant Gen9 Servers.

]]> Fixed following issues:

  • AMS now reflects correct numbering of SATA drives in SATA enclosures attached to SATA controllers.
  • AMS now reflects correct enumeration of SATA drives and SATA controllers.
  • AMS now generates traps when SATA drives are removed or inserted when connected to SATA controllers.
  • AMS now updates proper cpqFcaMibCondition.
  • AMS now generates traps for NVMe drives.
  • AMS now sends proper value of cpqSiServerSystemId in cpqNic traps.
  • No segfault occurs when hot plugging of PCI devices.
]]>
  • Added support for new HPE ProLiant Gen9 Servers.
  • Added support for NVMe drives and hot-plug PCIe (NVMe).
  • Added option to specify RPM vendor on command line to include in cpqHoSwVerTable.
  • Added new HPE PCI ID when looking for HPE devices.
  • Change name of AMS daemon from hpHelper to amsHelper.
  • Added cpqIdeAtaDiskSSDWearStatusChange trap generation.
    • ]]>
  • AMS now reflects the actuall structure of SATA controllers and drives and not the Linux kernels.
  • AMS now uses PCI VPD data, then pci.ids database, then internal NIC_DB to determine controller names.
  • AMS now ignores all scsi host controllers using the hpsa kernel module in the cpqScsi MIB handler.
  • AMS looks at the RPM Packager tag to determine installed software (cpqHoSwVerTable) in addition to the RPM Vendor tag.
  • AMS now uses other methods to get the correct process name if the value coming from procfs is truncated.
  • AMS uses PCI config space to get PCI link width.
    • ]]>         Initial support for SUSE Linux Enterprise Server 12.

    Initial support for the following devices:

    • HPE StoreFabric SN1200E 16Gb 2P FC HBA
    • HPE StoreFabric SN1200E 16Gb 1P FC HBA
    • HPE StoreFabric SN1600E 32Gb 2p FC HBA
    • HPE StoreFabric SN1600E 32Gb 1p FC HBA

     

    ]]>         This kit, version 11.1.183.22, adds support for the following devices:

    • HPE StoreFabric SN1200E 16Gb 2P FC HBA
    • HPE StoreFabric SN1200E 16Gb 1P FC HBA
    • HPE StoreFabric SN1600E 32Gb 2p FC HBA
    • HPE StoreFabric SN1600E 32Gb 1p FC HBA
    ]]>         Updated the kit to version 6.0.0.0-2

    Added support for the following devices:

    • HPE StoreFabric SN1100Q 16GB 2-port PCIe Fibre Channel Host Bus Adapter  
    • HPE StoreFabric SN1100Q 16GB 1-port PCIe Fibre Channel Host Bus Adapter
    • HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
    • HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter
    ]]>         Updated the kit to version 6.0.0.0-1

    ]]>         Added support for the HPE StoreFabric 84E 4-Port Fibre Channel Host Bus Adapter

     

    ]]>         This is the initial release of a configurable component using the Emulex Smart SAN executable.

    ]]>         This is the initial release of a configurable component using the QLogic Smart SAN executable.

    ]]>         Added support for new HPE ProLiant Gen9 Servers.

    ]]>
  • iLO reset doesn't affect running hp-health service.
  • Fixed an issue where hp-health was consuming 100% CPU utilization on hpasmxld (iLO2).
  • After modifying execution order of asr and hp-health service, hp-asrd runs properly.
  • Fixed hp-health and iLO target connectivity issue.
  • The hpasmcli command 'show server' now displays embedded NICs.
    • ]]>         Added support for new HPE ProLiant Gen9 Servers.

    ]]>
  • iLO reset doesn't affect running hp-health service.
  • Fixed an issue where hp-health was consuming 100% CPU utilization on hpasmxld (iLO2).
  • After modifying execution order of asr and hp-health service, hp-asrd runs properly.
  • Fixed hp-health and iLO target connectivity issue.
    • ]]>         Added support for new HPE ProLiant Gen9 Servers.

    Added support for the following storage controllers:

    • HPE Smart Array P240nr Controller
    • HPE Smart HBA H240nr Controller
    • HPE Smart Array P542D Controller

    Added support for the following network adapters:

    • HPE Synergy 3520C 10/20Gb Converged Network  Adapter 
    • HPE FlexFabric 10Gb 2-port 556FLB Adapter 
    • HPE FlexFabric 10Gb 4-port 536FLR-T Adapter
    • HPE Ethernet 25Gb 4-port 620SFP28 Adapter 
    • HPE Ethernet 10Gb 2-port 563i Adapter
    ]]>
  • SMH showing complete 'System ROM' version in System section.
  • cmahostd handles nfs and autofs mount point to fix performance problem.
    • ]]>
  • cmahostd handles nfs and autofs mount point to fix performance problem.
  • Removed SGID bit to enable access to files and folders under /var/spool/compaq/hasm/registry.
    • ]]>         Added support for new HPE ProLiant Gen9 Servers.

    ]]>         Added support for new HPE ProLiant Gen9 Servers.

    ]]>

  • Updated the following components:

    • PHP to version 5.5.38

    • Curl to version 7.49.1

    • OpenSSL to version 1.0.2h

    • Libxml2 to version libxml2-2.9.4

  • SSL Cipher Suite is set to TLSv1.2 as default

  • Improved Security features [Please find more details in the Security Bulletin (ID: HPSBMU03653)]

    • ]]>
  • Proper handling of Single Sign-On requests and certificates, which are in bad format
  • HPE Rebranding changes
    • ]]>

  • Updated the following components:

    • PHP to version 5.5.38

    • Curl to version 7.49.1

    • OpenSSL to version 1.0.2h

    • Libxml2 to version libxml2-2.9.4

  • SSL Cipher Suite is set to TLSv1.2 as default

  • Improved Security features [Please find more details in the Security Bulletin (ID: HPSBMU03653)]

    • ]]>
  • Proper handling of Single Sign-On requests and certificates, which are in bad format
  • HPE Rebranding changes
    • ]]>         Support for:

            Smart Array H240nr

            Smart Array P240nr

            Smart Array P542D

    Added Sanitize Erase for supporting controllers

    Added ability to enable erase and stop erase on multiple drives

    ]]>         Support for:

            Smart Array H240nr

            Smart Array P240nr

            Smart Array P542D

    Added Sanitize Erase for supporting controllers

    Added ability to enable erase and stop erase on multiple drives

    ]]>         New features:

    • Support for Drive Sanitize on Smart Array Px2x and Smart Array Px3x controllers

    • Allows users to forcefully re-enable failed encrypted volumes when their encryption keys are permanently lost and all the failed drives have been replaced

    • Added logical drive numbers/physical drive locations to primary and secondary boot volume information

    ]]>         新增特性：

    • 对驱动器清洁上 Smart Array Px2x 和 Smart Array Px3x 控制器的支持

    • 允许用户都将永久丢失其加密密钥并更换所有出现故障的驱动器时强制重新启用故障加密的卷

    • 添加了逻辑驱动器号中的物理驱动器位置为主要和次要的引导卷信息

    ]]>         Support for:

            Smart Array H240nr

            Smart Array P240nr

            Smart Array P542D

    Added Sanitize Erase for supporting controllers

    Added ability to enable erase and stop erase on multiple drives

    ]]>         New features:

    • Support for Drive Sanitize on Smart Array Px2x and Smart Array Px3x controllers

    • Allows users to forcefully re-enable failed encrypted volumes when their encryption keys are permanently lost and all the failed drives have been replaced

    • Added logical drive numbers/physical drive locations to primary and secondary boot volume information

    ]]>         Support for:

            Smart Array H240nr

            Smart Array P240nr

            Smart Array P542D

    Added Sanitize Erase for supporting controllers

    Added ability to enable erase and stop erase on multiple drives

    ]]>         New features:

    • Support for Drive Sanitize on Smart Array Px2x and Smart Array Px3x controllers

    • Allows users to forcefully re-enable failed encrypted volumes when their encryption keys are permanently lost and all the failed drives have been replaced

    • Added logical drive numbers/physical drive locations to primary and secondary boot volume information

    ]]>         HPONCFG displays an appropriate error message with -w option when LOCK_CONFIGURATION is enabled.

    ]]>         HPONCFG displays an appropriate error message with -w option when LOCK_CONFIGURATION is enabled.

    ]]>         General update.

    ]]>         General update.

    ]]>         Addded support for P542D storage controller.
    Added support for NVIDIA Tesla K40 XL 12Gb Module.
    Support Wellsburg 6-Port SATA Controller.
    Support for new Gen9 systems.

    See the Service Pack for ProLiant Release Notes for more information.

    See the Service Pack for ProLiant Server Support Guide for information on supported servers.

    ]]>
  • Translations fixes.
  • Fixed a problem where saving the survey with a system with 124+ luns failed.
  • Fixed a problem where the crontab entry from the Insight Diagnostics schedule feature was not removed when unistalled.
    • ]]>
  • Support for HPE FlexFabric 10Gb 2-port 556FLR-T Adapter.
  • Support for HPE StoreFabric CN1200E 10G BASE-T Dual Port Converged Network Adapter.
  • Support for memory dram speed 2400 Mbits.
  • Support for DDR4-2400 1.2V memory.
  • Support for Apollo 4520 Storage Expander.
  • Support 6 SFF rear cage for Apollo 4200.
  • Support for StoreFabric CN1100R-T Converged Network Adapter.
  • Hewlett Packard Enterprise rebrand.

    • See the HP Service Pack for ProLiant Release Notes for more information.

    See the HP Service Pack for ProLiant Server Support Guide for information on supported servers.

    ]]>
  • Contains fixes to support HPE ProLiant Gen9 servers.
  • DL60 blank Remote Management category.
  • Untranslated English to Japanese strings.
  • Blank Remote Control section in Survey for DL20 Gen9.
  • Capability to report same backplanes but different box numbers. 
    • ]]>