TBD

]]> TBD

]]>
  • この製品では、TMFIFO インターフェイスを介した大容量ファイルの転送が失敗する問題が修正されました。
  • この製品では、小さすぎるバッファーサイズを使用することで発生する問題を修正 しました。
  • この製品では、サポートされている速度が現在の速度として表示されるか、その逆となる、イベントID 401の問題を修正しました。
  • この製品は、カウンターセット「Mellanox WinOF-2 VF Port Traffic」内の特定のカウンターが、perfmonでまれに無効な値を表示する問題を修正しました。
    • ]]>
  • This product fixed an issue that caused large file transfers over the TMFIFO interface to fail.
  • This product fixed an issue that caused by using a buffer size that was too small.
  • This product fixed an issue in event ID 401, where the supported speed was displayed as the current speed and vice versa.
  • This product fixed an issue where certain counters in the counter set "Mellanox WinOF-2 VF Port Traffic" would occasionally display an invalid value in perfmon.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Azure Stack HCI 23H2のサポートを追加しました
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • 直接接続されたNVMeファームウェアのフラッシュの表示メッセージを修正し、OSによるFWアクティベーションの結果を揃えます。
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Firmware maintenance release of Samsung PM1743 NVMe SSD with HPK6
    • ]]>
  • Firmware maintenance release of Samsung PM1743 NVMe SSD with HPK6
    • ]]>
  • Modify Power State modes (25/18/16/14W) which can be enabled as an option.
  • Improved on TTR requirement to fix device temporarily not found issue after hot-plug.
    • ]]>
  • Modify Power State modes (25/18/16/14W) which can be enabled as an option.
  • Improved on TTR requirement to fix device temporarily not found issue after hot-plug.
    • ]]>
  • Azure Stack HCI 23H2のサポートを追加しました
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         バージョン6.0.0.1-4にキットをアップデートしました

    ]]>         Updated the kit to version 6.0.0.1-4

    ]]>         バージョン6.0.0.1-4にキットをアップデートしました

    ]]>         Updated the kit to version 6.0.0.1-4

    ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>
  • This product removes RDE AutoSpeedNegotiationEnabled property.
  • This product fixes an issue where the FW upgrade failed with 562SFP+/x710 adapters due to timeout.
  • This product fixes an issue where the port 2 and port 3 do not always report link down when link is down on 4-Port Ethernet Adapter.
    • ]]>
  • This product removes RDE AutoSpeedNegotiationEnabled property.
  • This product fixes an issue where the FW upgrade failed with 562SFP+/x710 adapters due to timeout.
  • This product fixes an issue where the port 2 and port 3 do not always report link down when link is down on 4-Port Ethernet Adapter.
    • ]]>         この製品は、最新のドライバーとの互換性を強化しました。

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • DMTF PLDM Redfish デバイス有効化の機能強化
    • Redfishボリューム変換サポート
      • POST #Volume.ChangeRAIDLayout: RAIDレイアウトの変更。RAIDレイアウトの変更は、入力JSONボディにターゲットRAIDTypeとドライブのリストを提供することで実現されます。
      • POST #Volume.ChangeRAIDLayout: サイズ変更。ChangeRAIDLayoutを使用すると、RAIDTypeを変更せずに新しい未構成正常ドライブを追加することでボリュームのサイズを変更できます。このような場合、入力JSONボディでRAIDTypeを指定してはいけませんが、それに応じて完全なドライブリストを指定する必要があります。
      • PATCH Volume[CapacityBytes]: この操作は、ボリューム内に利用可能な未使用サイズがある場合にボリュームのサイズを変更するために使用されます。ここに新しいドライブを追加するスコープはありません
      • POST #Volume.CheckConsistency: この操作は、ボリューム上の整合性チェック操作を開始します。この操作では入力は想定されません。
    • Redfish Metrics GETサポート
      • StorageControllerMetrics: UncorrectableECCErrorCount、CorrectableECCErrorCount、CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount、SAS.LossOfDwordSynchronizationCount、SAS.RunningDisparityErrorCount、PCIeErrors.CorrectableErrorCount、PCIeErrors.FatalErrorCount、PCIeErrors.NonFatalErrorCount
      • 各カウンターは最大65535までの値を保持できます。カウンターが最大値に達しても、値はリセットされません。
      • ユーザーがコントローラーのNVRAMクリアまたはRedfish ResetToDefaults.ResetAllを実行すると、メトリックはクリアされます。
  • MRSAおよびstorcli工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加。
    • コントローラー上に構成が存在する場合、または固定キャッシュが存在する場合、NVRAMクリア操作は許可されません。
    • NVRAMをクリアした後、コントローラーFWはオンラインコントローラーリセット (OCR) を実行します。何らかの理由でOCRを実行できない場合は、システムを再起動するようにユーザーに通知されます。
    • NVRAMクリア操作は、機能的にはRedfish ResetToDefaults.ResetAll操作と同等です。
  • バックプレーンベイ数情報を、コントローラーに接続されている実際のベイに変更。非ホットプラグ構成の場合、コントローラーは常に16個のベイを表示します。
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • a00143124en_usアドバイザリを修正: HPE MR Gen11 コントローラー - HPE Gen11サーバー上のMR Gen11コントローラーがIMLで"WriteCacheDataLoss"を生成できない場合がある
  • a00148035en_usアドバイザリを修正: HPE MR Gen11コントローラー - ベイとボックスのNVMeドライブの場所がワンタイムブートメニューに表示されない
  • Linux OSでLTOの128KBを超える読み取り/書き込み転送が失敗する問題を修正
  • Backup ExecがLTOで動作しない問題を修正
  • 240個の論理ドライブが構成されている場合、サーバーのブート時にコントローラーがiLOによってドロップされる可能性がある問題を修正
  • ドライブを連続的に削除すると、サーバーヘルスが一時的にクリティカルを示すというまれな問題を修正
  • 予期しないPCIConfiglinkページイベント、仮想SESデバイスへのタスク管理のタイムアウトメッセージがsnapdumpに記録される問題を修正
  • 空のベイにスロット対応プロトコルがない問題を修正
  • コントローラーに接続されたLTOのリンク速度が[不明]と表示される問題を修正
  • Request Senseコマンドにより、サニタイズが進行中のドライブでタスク管理が実行される問題を修正。
  • 255を超える値が使用された場合に、Redfish PATCH StorageController[ControllerRates]がランダムな値を暗黙的に設定してしまう問題を修正。
  • コントローラーがパススルーとして構成されているときにVMを再起動すると、誤ったコントローラーエラーイベントが記録される可能性がある問題を修正
  • 2つのバックプレーンが同じストレージポートに接続されている場合、Redfishファブリックポートのアクティブ幅と現在の速度が間違っているという問題を修正。
  • 再起動後にNVMeドライブのリンクステータスが失敗する可能性があるというまれな問題を修正 
  • 複数のドライブの取り外しと挿入が短時間に行われたときにコントローラーがアサートされる可能性があるというまれな問題を修正
  • SATAパススルーコマンドが実行中の場合、SATAドライブのサニタイズのパーセンテージが進行しない問題を修正
  • NVMeドライブでサニタイズのパーセンテージが進行しない問題を修正
  • 読み取り/書き込みコマンドと非読み取り/書き込みコマンドの耐久テストでIOタイムアウトとデバイスリセットが発生することがあるというまれな問題を修正
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>         この製品は、PNP IDテーブルのアップデートを強化します。(プラグアンドプレイ識別子)

    ]]>         This product enhances to update PNP ID table. (Plug and Play Identifier)

    ]]>         この製品は、PNP IDテーブルのアップデートを強化します。(プラグアンドプレイ識別子)

    ]]>         This product enhances to update PNP ID table. (Plug and Play Identifier)

    ]]>         Support new Gen12 servers.

    ]]>         Support new Gen12 servers.

    ]]>         新しいML110およびDL560 Gen11サーバーのサポート

    ]]>         Support new ML110 and DL560 Gen11 servers

    ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         バージョン28.44.1036には、以下の新機能と変更が含まれます。

    • NIC輻輳時にPause/PFCフレームの送信を遅延させるために、RXロスレスバッファーサイズを増やしました。
    • 1Gリンク速度でのSyncEのサポートが追加されました。
    • 並列処理を強化するために、割り当てフローと割り当て解除フローの新しいメカニズムを追加しました。
    • マルチホスト展開を使用する場合、各ホストには固有のポートとPFが割り当てられ、独自のLAGを管理します。
    • PCIeスイッチ構成のセットアップでfwresetを実行するためのツールとドライバーを含む新しい同期フローのサポートが追加されました。
    • 同じPF上の異なるVF間で統合PTPがサポートされるようになりました。
    • 新しいMADのサポートが追加されました: PortRecoveryPolicyConfigおよび PortRecoveryPolicyCounters 。PHY回復プロセス中、ファームウェアコアはport_logical_stateをActiveとして示します。
    • 新しいNV構成 (SM_DISABLE、デフォルト0) が追加されました。これを有効にすると、SMから発信されていないSMPトラフィックがブロックされます。
    • PFCCアクセスレジスターのパラメーターとしてケーブル長を設定する機能を追加しました。ケーブルの長さは、サイズ、Xoff、Xon しきい値などの RXロスレスバッファーパラメーターの計算に使用されます。
    ]]>         New features and changes included in version 28.44.1036:

    • Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
    • Added support for SyncE at 1G link speed.
    • Added a new mechanism for allocations and deallocations flows to enhance parallelism.
    • When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
    • Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
    • Unified PTP is now supported across different VFs on the same PF.
    • Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the  port_logical_state as Active.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         以下の問題がバージョン28.44.1036(A)で修正されました。

    • アダプターメタデータ内のデバイスタイプが不適切であったため、サポートされているすべての環境で、製品がHPE.comに期待どおりに表示されませんでした。

    以下の問題点がバージョン28.44.1036で修正されました。

    • ケーブル情報セマフォのデッドロック。
    • TLV完全リストのエラー処理が不適切だったため、TLVメカニズムがハングしました。
    • SPDM GET_CERTIFICATE操作は、すべての証明書チェーンのオフセットとチャンクサイズをサポートしていませんでした。
    • VDPAにおける問題で、virtqがmkeyなしで作成された場合、またはライブマイグレーション中に人を介さずマッピングされたmkeyで作成された場合、virtqを破棄するとext_synd=0x8f33でヘルスバッファー症候群が発生します。
    • VDPA機能ビットGUEST_TSO4およびGUEST_TSO6が予期せずデフォルトで設定され、トラフィックの中断が発生しました。
    • PCC NPを有効にし、リンクタイプを1つのポートにIB、もう1つのポートにEthernetを設定すると、dmesgにext_synd 0x8309のアサートが表示される可能性があります。
    ]]>         The following issues have been fixed in version 28.44.1036(A):

    • Improper device type in the adapter metadata resulted in the product not listing as expected on HPE.com for all supported environments.

    The following issues have been fixed in version 28.44.1036:

    • Cable info semaphore deadlock.
    • Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
    • The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
    • An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
    • The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
    • Enabling PCC NP and setting the link type to one port as IB and the other as Ethernet could cause an assert to appear in dmesg with ext_synd 0x8309.
    ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • ESXi 9.0のサポートを追加しました
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • この製品は、nicclilomのインストール場所を正しいパスにアップデートするように強化されています。
  • この製品は、NETDEV_CHANGEイベントが発生したときにDCB設定を照会することで機能を強化します。
    • ]]>
  • This product enhances to update the installation location for nicclilom to the correct path.
  • This product enhances functionality by querying DCB settings when the NETDEV_CHANGE event occurs.
    • ]]>
  • この製品では、不正な帯域幅割り当てによるトラフィッククラス(TC)の枯渇を防ぐために、ETS検証の問題を修正しました。
  • この製品は、debugfs qp_infoがUDP送信元ポート値を正しく表示しない問題を修正します。
  • この製品は、シャットダウンまたはサスペンド中にデバイスがPTPから登録解除できない問題を修正します。
  • この製品は、IPv6 VXLANカプセル化解除が適切にサポートされていなかった問題を修正しました。
  • この製品は、順序外(OOS)パケットがドロップされる問題を修正します。
  • この製品は、フロー優先度レベル0 ～ 3が正しく処理されない問題を修正します。
  • この製品は、コアダンプサマリーを生成するときにコアダンプファイルデコーダーがクラッシュする問題を修正します。
    • ]]>
  • This product has fixed the ETS validation issue to prevent traffic class (TC) starvation caused by incorrect bandwidth allocation.
  • This product fixes the issue where debugfs qp_info displays the UDP source port value incorrectly.
  • This product fixes the issue where the device fails to unregister from PTP during shutdown or suspend.
  • This product fixes the issue where IPv6 VXLAN decapsulation was not properly supported.
  • This product fixes the issue where out-of-sequence (OOS) packets were being dropped.
  • This product fixes the issue where flow priority levels 0–3 were not handled correctly.
  • This product fixes the issue where the coredump file decoder crashes when generating a coredump summary.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、Azure Stack HCI OSをサポートするようになりました。

    ]]>         This product now supports Azure Stack HCI OS.

    ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No new features and changes have been included in version 22.45.1020.

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No new features and changes have been included in version 22.45.1020.

    ]]>         The following issues have been fixed in version 22.45.1020:

    • PCC_CNP_COUNT could not be reset using the pcc_counter.sh script in the DOCA tools.
    • VQoS algorithm issue related to learning when an element is active and when it begins sending traffic.
    • A race condition that would prevent the application from transmitting when VQoS was enabled.
    • Bandwidth would drop when unbinding multiple VFs with VQoS enabled.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         The following issues have been fixed in version 22.45.1020:

    • PCC_CNP_COUNT could not be reset using the pcc_counter.sh script in the DOCA tools.
    • VQoS algorithm issue related to learning when an element is active and when it begins sending traffic.
    • A race condition that would prevent the application from transmitting when VQoS was enabled.
    • Bandwidth would drop when unbinding multiple VFs with VQoS enabled.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         セキュリティ強化の機能強化 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能強化が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨します。

     

    バージョン22.44.1036には、以下の新機能と変更が含まれます。

    • 同じPF上の異なるVF間で統合PTPがサポートされるようになりました。
    • 新しいNV構成 (SM_DISABLE、デフォルト0) が追加されました。これを有効にすると、SMから発信されていないSMPトラフィックがブロックされます。
    • PFCCアクセスレジスターのパラメーターとしてケーブル長を設定する機能を追加しました。ケーブルの長さは、サイズ、Xoff、Xon しきい値などの RXロスレスバッファーパラメーターの計算に使用されます。
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 22.44.1036:

    • Unified PTP is now supported across different VFs on the same PF.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         以下の問題点がバージョン22.44.1036で修正されました：

    • エミュレーションドアベルが故障すると、トラフィックが停止し、回復が妨げられます。
    ]]>         The following issues have been fixed in version 22.44.1036:

    • Traffic would halt and recovery would be prevented when the emulation doorbell malfunctioned.
    ]]>         この製品は、ファームウェアをアップデートした後に、BCM5719 4ポートアダプターのポート3および4でMBA構成がデフォルトにリセットされる問題を修正します。

    ]]>         This product fixes an issue where MBA configuration reset to defaults on port 3 and 4 for BCM5719 4-port adapters after updating firmware.

    ]]>         この製品は、ファームウェアのアップデート後にMBA構成がデフォルトにリセットされる問題を修正します。

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         Fix 1) PCIe link length drop in AMD x2 system configuration
        2) Drive detection after hot re-insert on Windows
        3) Other regular FW patch release.

    ]]>         Fix 1) PCIe link length drop in AMD x2 system configuration
        2) Drive detection after hot re-insert on Windows
        3) Other regular FW patch release.

    ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>         TBD

    ]]>         TBD

    ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、ファームウェアの機能に基づいてRDMAフラグのアップデートを有効にすることで、RDMA機能を強化します。

    ]]>         This product enhances RDMA functionality by enabling the RDMA flag update based on firmware capability.

    ]]>
  • この製品は、ダイナミック割り込みモデレーションが適切にシャットダウンできない問題を修正します。
  • この製品は、コアダンプファイルを生成するときにコアダンプファイルデコーダーがクラッシュする問題を修正します。
    • ]]>
  • This product fixes the issue where Dynamic Interrupt Moderation fails to shut down properly.
  • This product fixes the issue where the coredump file decoder crashes when generating the summary of a coredump file.
    • ]]>         Added Support for RHEL 10.

    ]]>         Added Support for RHEL 10.

    ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         • HPE ProLiant DL385 Gen11 サーバーで RTX 6000 Proアクセラレータを有効にしました。

    • NVIDIA RTX A1000アクセラレータのHPE iLO 6サポートを有効にしました。

    • UBM11でHPE iLO 6のサポートを有効にしました。

    • OCP/PCI カードのメイン温度センサーのフォールバックセンサーの有効化または無効化に対する HPE iLO 6サポートを有効にしました。

    • NVMe-MIファームウェアアップデートに対する HPE iLO 6サポートを有効にしました。

    • LDAPセッション永続性のサポート。

    • ホストの電源再投入時に仮想シリアルポート (VSP) ログを保持する機能。

    • HPE iLO GUIを使用して、トランスポート層セキュリティ (TLS) によるリモートsyslogの設定をサポートします。

    • GUIからESKMパスワードをローテーションするオプションが追加されました。

    • GUIにAC電源再投入のボタンを追加しました。

    • サーバーのPOST状態中にブート順序を変更できるようにするサポートが追加されました。

    • OCP/PCI カードのフォールバック温度センサーを有効または無効にするサポートが追加されました。

    ]]>         • Enabled RTX 6000 Pro Accelerator on HPE ProLiant DL385 Gen11 servers.

    • Enabled HPE iLO 6 support for NVIDIA RTX A1000 Accelerator.

    • Enabled HPE iLO 6 support for UBM11.

    • Enabled HPE iLO 6 support for fallback sensor enablement or dis-enablement of OCP/PCI card main temperature sensors.

    • Enabled HPE iLO 6 support for NVMe-MI firmware updates.

    • Support for LDAP session persistence.

    • Ability to retain Virtual Serial Port (VSP) logs upon host power cycle.

    • Support for configuring remote syslog with Transport Layer Security (TLS) using the HPE iLO GUI.

    • Added an option to rotate ESKM password from GUI.

    • Added an AC power-cycle as a button in the GUI.

    • Added support to allow boot order modifications during server POST state.

    • Added support to enable or disable fallback temperature sensors for OCP/PCI card.

    ]]>         • HPE iLO Intelligent Platform Management Interface (IPMI) コマンド (SDR タイプ メモリ) で一部のメモリセンサーレコードがリストされない問題を修正しました。

    • SFIC の生成に失敗し、redfish /v1/ResourceDirectory のURIが設定されなかった問題を修正しました。

    • LDAP/ディレクトリユーザーがローカルユーザーを作成できない問題を修正しました。

    • 日本語キーボードレイアウトを使用し、漢字キー[英語キーボードの` eq キー]を押したときに文字が重複する問題を修正しました。

    • HPE iLO6 Web GUI にプロセッサー 2 のステータスが正しく表示されない問題を修正しました。

    • Apollo サーバーの電源冗長性の OID が (1) の値しか返さない問題を修正しました。

    • PuTTYの新しいバージョンからのSSH接続が許可されない問題を修正しました。

    ]]>         • Fixed an issue of HPE iLO Intelligent Platform Management Interface (IPMI) command (SDR type memory) not listing some of the memory sensor records.

    • Fixed an issue where SFIC generation failed and the URIs in the redfish /v1/ResourceDirectory did not get populated.

    • Fixed an issue where an LDAP/Directory user was unable create a local user.

    • Fixed the repeated characters' issue when Japanese Keyboard Layout is used and Kanji key [English Keyboard ` eq key] was pressed.

    • Fixed an issue where HPE iLO6 Web GUI did not show the correct processor 2 status.

    • Fixed an issue where the OID for power supply redundancy was only returning a value of (1) for Apollo server.

    • Fixed an issue where SSH connections from later versions of PuTTY were not allowed.

    ]]>         Important Notes:

    Ver. 1.2.2(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.2.2. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.2.2.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This is the initial verison of the firmware.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.2.2(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.2.2. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.2.2.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This is the initial verison of the firmware.

    Known Issues:

    None

    ]]>         重要な注意：

    Ver 1.2.2(B)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver 1.2.2と同等です。ファームウェアをバージョン1.2.2にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョン(B)にアップグレードする必要はありません。

    ファームウェアの依存関係：

    なし

    機能強化/新しい機能：

    これは、このファームウェアでの最初のバージョンです。

    既知の問題点：

    なし

    ]]>         Important Notes:

    Ver. 1.2.2(B) contains updates to the firmware packaging and is functionally equivalent to ver. 1.2.2. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 1.2.2.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This is the initial verison of the firmware.

    Known Issues:

    None

    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         バージョン20.43.2026には、変更も新機能も含まれていません。

    ]]>         No changes or new features have been included in version 20.43.2026.

    ]]>         以下の問題点がバージョン20.43.2026で修正されました：

    • サードパーティ製スイッチとのリンクアップの問題 (BCM53405)。
    • 競合状態を解決するためにCQ参照カウンターのアンダーフローを伴うファームウェアアサーション0x889fが発生する参照カウンターの問題。
    ]]>         The following issues have been fixed in version 20.43.2026:

    • A linkup issue vs a 3rd party switch (BCM53405).
    • A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.
    ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         Features included in version 28.44.1036:

    • Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
    • Added support for SyncE at 1G link speed.
    • Added a new mechanism for allocations and deallocations flows to enhance parallelism.
    • When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
    • Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
    • Unified PTP is now supported across different VFs on the same PF.
    • Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the  port_logical_state as Active.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         Features included in version 28.44.1036:

    • Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
    • Added support for SyncE at 1G link speed.
    • Added a new mechanism for allocations and deallocations flows to enhance parallelism.
    • When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
    • Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
    • Unified PTP is now supported across different VFs on the same PF.
    • Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the  port_logical_state as Active.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         Initial version.

    ]]>         Initial version.

    ]]>         TO DO

    ]]>         To Do

    ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • リセットの問題と定期的なメンテナンスファームウェアアップデートを修正しました。
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

    ]]>         This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  •  コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

    ]]>         This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.058.0 (2.20_03_03_2025) should be paired with System ROM 2.20_03-21-2025.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.058.0 (2.20_03_03_2025) should be paired with System ROM 2.20_03-21-2025.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

    Known Issues:

    None]]>         This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

    ]]>         This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.058.0 (2.20_03_03_2025) should be paired with System ROM 2.20_03-21-2025.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.058.0 (2.20_03_03_2025) should be paired with System ROM 2.20_03-21-2025.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

    Known Issues:

    None]]>
  • Firmware changes aligned for FIPS code release and one assert fix
    • ]]>
  • Firmware changes aligned for FIPS code release and one assert fix
    • ]]>         1.ドライブがアサートを防ぐためにRequest Senseの前にR/Wコマンドを選択して実行する原因となった、メディアキャッシュクリーニングの中止処理のロジックバグを修正しました。
    2. その他のログ機能とFW機能強化を追加します。

    ]]>         1.Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
    2. Adding other logging and FW enhancements.

    ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>         今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         今回のリリースで解決した問題については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         今回のリリースで解決した問題については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • 工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加
    • コマンド: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • 工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加
    • コマンド: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>         バージョン9.4.11.20にアップデートしました

    ]]>         Updated to version 9.4.11.20

    ]]>         バージョン9.4.11.20にアップデートしました

    ]]>         Updated to version 9.4.11.20

    ]]>         ドライバーバージョン14.4.393.20にアップデートしました

    rawドライバーファイルは、Smartコンポーネントを解凍し、その後Emulexインストーラーを解凍することによって取得することができます。  次のコマンドを使用します。

        elxdrvr-fc-version.exe /q2 extract=2

    解凍されたファイルは次に置かれます。

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。  例、

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         ドライバーバージョン14.4.393.20にアップデートしました

    rawドライバーファイルは、Smartコンポーネントを解凍し、その後Emulexインストーラーを解凍することによって取得することができます。  次のコマンドを使用します。

        elxdrvr-fc-version.exe /q2 extract=2

    解凍されたファイルは次に置かれます。

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。  例、

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         For SEP2025 SPP

    ]]>         For SEP2025 SPP

    ]]>
  • Smartコンポーネントのハングの問題を修正します。
    • ]]>
  • Fix smart component hang issue.
    • ]]>
  • Improve FW handling on capacitor charge timeout mechanism
  • Change the sense code during download microcode (0E)
    • ]]>
  • Improve FW handling on capacitor charge timeout mechanism
  • Change the sense code during download microcode (0E)
    • ]]>         最初のリリースです

    ]]>         This is initial release

    ]]>         Upgraded to version 22.45.1020

    ]]>         Upgraded to version 22.45.1020

    ]]>         バージョン26.43.1014にアップグレードされました

    ]]>         Upgraded to version 26.43.1014

    ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Azure Stack HCI 23H2のサポートを追加しました
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         For SEP2025 SPP

    ]]>         For SEP2025 SPP

    ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点：

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         Updated to driver version 25.4.50020.0

    ]]>         Updated to driver version 25.4.50020.0

    ]]>         ドライバーバージョン24.10.26603.0にアップデートしました

    ]]>         Updated to driver version 24.10.26603.0

    ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、tg3ドライバーがdmesgで正しいtg3ドライバー名を報告しない問題を修正しました。

    ]]>         This product fix issue where tg3 driver doesn't report correct tg3 driver name in dmesg.

    ]]>         重要な注意：

    なし

    ファームウェアの依存関係:

    なし

    機能強化/新しい機能：

    Gen11 AMDプラットフォームの新しいレイアウトデザインに基づいてADC変換式を変更しました。 
    AMDプラットフォーム上の高速プラットフォームトリガーメカニズムの精度が向上しました。

    既知の問題点：

    なし

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.  
    Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This is the initial version of the firmware.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This is the initial version of the firmware.

    Known Issues:

    None

    ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         SR 2.9.2 パッチ 1

    ]]>         SR 2.9.2 patch 1

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Enhanced ROM error logging when DIMM serial number is identified as "00000000".

    ]]>         Enhanced ROM error logging when DIMM serial number is identified as "00000000".

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Catlow Refresh MR2 BKC. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where incorrect Structure Boot Name showed in the OS boot option.

    Addressed an issue where system may hang while switching RBSU pages in multi-language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Catlow Refresh MR2 BKC. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where incorrect Structure Boot Name showed in the OS boot option.

    Addressed an issue where system may hang while switching RBSU pages in multi-language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         複数言語の翻訳をアップデートしました。

    "スムーズな冷却"RBSUオプションのヘルプテキストを追加しました。

    ]]>         Updated multi-language translation.

    Added the help text for "Smooth Cooling" RBSU option.

    ]]>         重要な注記：

    このバージョンのシステムROMには、Intel Catlow Refresh MR1 BKCに合わせたアップデートが含まれています。 このバージョンのシステムROMは、Server Platform Services (SPS) ファームウェア06.03.04.058.0 (2.20_03_03_2025) と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題：

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Catlow Refresh MR1 BKC. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Known Issues:

    None]]>
  • Fix FW assert and other regular fixes
    • ]]>
  • Fix FW assert and other regular fixes
    • ]]>         TBD

    ]]>         TBD

    ]]>         新しいプラットフォームのサポートを追加します。

    ]]>         Add new support platform.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • この製品は、ネットワーク構成を簡素化するために、Ethernet/LLDPTransmit/ManagementVlanId プロパティを削除します。
  • この製品は、MSI-Xベクトルカウントを調整してリソース枯渇を防ぐことで、システムの安定性を高めます。
  • この製品は、MCTPトランスポートヘッダーにMsgTagを設定することでSPDM機能を強化します。
  • この製品は、BNXTドライバーのコアダンプ機能を強化し、診断機能を向上させます。
  • この製品は、RXレートプロファイルを追加し、DPDK機能を改善することで、ネットワークパフォーマンスを強化します。
    • ]]>
  • This product removes the Ethernet/LLDPTransmit/ManagementVlanId property to simplify network configuration.
  • This product enhances system stability by adjusting MSI-X vector counts to prevent resource exhaustion.
  • This product enhances SPDM functionality by setting the MsgTag in the MCTP transport header.
  • This product enhances the coredump feature in the BNXT driver for better diagnostic capabilities.
  • This product enhances network performance by adding the RX rate profile and improving DPDK functionality.
    • ]]>
  • この製品は、エラー回復中にファームウェアがドライバーにリセット通知を送信できない問題を修正します。
  • この製品は、RDE bejString特殊文字エスケープ シーケンスが誤ってエンコードされる問題を修正します。
  • この製品は、PLDMポート リンク速度センサーの読み取り値とイベント値が負として報告される問題を修正します。
  • この製品は、XDP/LPBK L2コンテキストエントリによってリソース リークが発生する問題を修正します。
  • この製品は、MACアドレスがゼロ以外の場合にのみXDPフローが解放されるようにすることで、XDPフローが適切に解放されない問題を修正します。
    • ]]>
  • This product fixes the issue where the firmware fails to send a reset notification to the driver during error recovery.
  • This product fixes the issue where the RDE bejString special character escape sequences were incorrectly encoded.
  • This product fixes the issue where the PLDM port link speed sensor reading and event values were reported as negative.
  • This product fixes the issue where the XDP/LPBK L2 context entry caused resource leaks.
  • This product fixes the issue where XDP flows were not properly freed by ensuring they are released only when the MAC address is non-zero.
    • ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         バージョン20.43.2026には、変更も新機能も含まれていません。

    ]]>         No changes or new features have been included in version 20.43.2026.

    ]]>         以下の問題点がバージョン20.43.2026で修正されました：

    • サードパーティ製スイッチとのリンクアップの問題 (BCM53405)。
    • 競合状態を解決するためにCQ参照カウンターのアンダーフローを伴うファームウェアアサーション0x889fが発生する参照カウンターの問題。
    ]]>         The following issues have been fixed in version 20.43.2026:

    • A linkup issue vs a 3rd party switch (BCM53405).
    • A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.
    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         For SEP2025 SPP

    ]]>         For SEP2025 SPP

    ]]>
  • Firmware changes aligned for FIPS code release and one assert fix
    • ]]>
  • Firmware changes aligned for FIPS code release and one assert fix
    • ]]>         1) ドライブがアサートを防ぐためにRequest Senseの前にR/Wコマンドを選択して実行する原因となった、メディアキャッシュクリーニングの中止処理のロジックバグを修正しました。
    2) その他のログ機能とFW機能強化を追加します。

    ]]>         1) Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
    2) Adding other logging and FW enhancements.

    ]]>
  • To fix chip kill -The host IO CMD may get timed out and shows SNS=04/40/C2.
    • ]]>
  • To fix chip kill -The host IO CMD may get timed out and shows SNS=04/40/C2.
    • ]]>
  • ドライブヘルスのクエリが誤ったドライブ予測エラーを引き起こす可能性がある稀なケースに対処するための修正を追加しました。
  • 詳しくは、HPEカスタマーアドバイザリ：https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00146367en_us (2025年3月20日から有効) を参照してください。
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00146367en_us which will be active on 20-Mar-2025.
    • ]]>
  • A Drive Firmware enhancement has been made for  Primera 600 products to reduce the probability of infrequent, unexpected power loss on some backed drives.
    • ]]>
  • A Drive Firmware enhancement has been made for  Primera 600 products to reduce the probability of infrequent, unexpected power loss on some backed drives.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         重要な注意：

    システムROMのこのリビジョンには、AMD第5世代EPYCプロセッサー用のAMDリファレンスコードTurinPI 1.0.0.5が含まれています。 システムROMのこのリビジョンには、AMD第4世代EPYCプロセッサー用のAMDリファレンスコードGenoaPI 1.0.0.Fが含まれています。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    システムのオーバーヒートによりPCIeデバイスが見つからない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This revision of the System ROM includes AMD reference code TurinPI 1.0.0.5 for AMD 5th Generation EPYC processors. This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where PCIe devices might be missing due to system overheating.

    Known Issues:

    None]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         バージョン20.43.2026には、変更も新機能も含まれていません。

    ]]>         No changes or new features have been included in version 20.43.2026.

    ]]>         以下の問題点がバージョン20.43.2026で修正されました：

    • サードパーティ製スイッチとのリンクアップの問題 (BCM53405)。
    • 競合状態を解決するためにCQ参照カウンターのアンダーフローを伴うファームウェアアサーション0x889fが発生する参照カウンターの問題。
    ]]>         The following issues have been fixed in version 20.43.2026:

    • A linkup issue vs a 3rd party switch (BCM53405).
    • A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.
    ]]>         TBD

    ]]>         TBD

    ]]>         This product fixes an issue where Large Send Offload (LSO) is not working.

    ]]>         This product fixes an issue where Large Send Offload (LSO) is not working.

    ]]>         TBD

    ]]>         TBD

    ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • リセットの問題と定期的なメンテナンスファームウェアアップデートを修正しました。
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • HPK5 is a planned maintenance release that follows HPK2. This is a recommended FW release that provides bug fixes for the  4K IU Solid State Drives
    • ]]>
  • HPK5 is a planned maintenance release that follows HPK2. This is a recommended FW release that provides bug fixes for the  4K IU Solid State Drives
    • ]]>
  • これはHPK2のバグ修正を提供する推奨FWリリースです。
    • ]]>
  • This is a recommended FW release that provides bug fixes for the HPK2
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • RSOD issue fixed. RSOD was occurred during server power-on if enable the VROC.
    • ]]>
  • RSOD issue fixed. RSOD was occurred during server power-on if enable the VROC.
    • ]]>
  • Fix a00145710en_us: HPE MR Gen11 and Gen10 Plus Storage Controllers - Purple Screen of Death (PSOD) May Be Observed When Updating Controller Firmware Via Service Pack for ProLiant (SPP) in Remote Deployment Mode With a VMware ESXi OS
    • ]]>
  • Fix a00145710en_us: HPE MR Gen11 and Gen10 Plus Storage Controllers - Purple Screen of Death (PSOD) May Be Observed When Updating Controller Firmware Via Service Pack for ProLiant (SPP) in Remote Deployment Mode With a VMware ESXi OS
    • ]]>
  • Fix a00145710en_us: HPE MR Gen11およびGen10 Plusストレージコントローラー - VMware ESXi OSを使用してリモート展開モードでService Pack for ProLiant (SPP) によりコントローラーのファームウェアをアップデートすると、パープルスクリーン (PSOD) が発生する場合があります
    • ]]>
  • Fix a00145710en_us: HPE MR Gen11 and Gen10 Plus Storage Controllers - Purple Screen of Death (PSOD) May Be Observed When Updating Controller Firmware Via Service Pack for ProLiant (SPP) in Remote Deployment Mode With a VMware ESXi OS
    • ]]>
  • UNMAP コマンドを検証し、最新のファームウェアでブロック制限 VPD ページ データが正しいことを確認しました。
    • ]]>
  • Verified the UNMAP command and confirmed that the Block Limits VPD page data is correct with the latest firmware.
    • ]]>
  • リセットとイベント処理スレッド間の潜在的なミューテックスデッドロックを修正しました。この問題は、大量の IO、デバイスの追加/削除、SCSI 再スキャンが同時に実行されている場合に発生する可能性があります。
    • ]]>
  • Fix a potential mutex deadlock between reset and event handling thread. The issue may happen when there is heavy IO, device add/delete and SCSI rescan running in the same time.
    • ]]>
  • UNMAP コマンドを検証し、最新のファームウェアでブロック制限 VPD ページ データが正しいことを確認しました。
    • ]]>
  • Verified the UNMAP command and confirmed that the Block Limits VPD page data is correct with the latest firmware.
    • ]]>
  • リセットとイベント処理スレッド間の潜在的なミューテックスデッドロックを修正しました。この問題は、大量の IO、デバイスの追加/削除、SCSI 再スキャンが同時に実行されている場合に発生する可能性があります。
    • ]]>
  • Fix a potential mutex deadlock between reset and event handling thread. The issue may happen when there is heavy IO, device add/delete and SCSI rescan running in the same time.
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         DIMMのシリアル番号が"00000000"と識別された場合、IMLが記録されます。

    ]]>         An IML will be logged if the DIMM serial number is identified as "00000000"

    ]]>         重要な注意：

    システムROMのこのリビジョンには、AMD第5世代EPYCプロセッサー用のAMDリファレンスコードTurinPI 1.0.0.6が含まれています。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    Microsoft Secured-coreサポートが有効になっている場合にシステムがハングする可能性がある問題に対処しました。

    日本語でページを切り替えているときにRBSUでシステムがハングする可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This revision of the System ROM includes AMD reference code TurinPI 1.0.0.6 for AMD 5th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may hang when Microsoft secure-core support is enabled.

    Addressed an issue where system may hang at RBSU while switch pages in Japanese language.

    Known Issues:

    None]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up
    • ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • このメンテナンスリビジョンにより、データの完全性が向上します。
  • このファームウェアにアップグレードしない場合のリスクは、特定のエラーやタイミング条件でデータが破損する可能性が高まることです。
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>         今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>
  • Updated supported platforms
    • ]]>
  • Updated supported platforms
    • ]]>
  • サポートされるプラットフォームをアップデートしました
    • ]]>
  • Updated supported platforms
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • DMTF PLDM Redfish デバイス有効化の機能強化
    • Redfishボリューム変換サポート
      • POST #Volume.ChangeRAIDLayout: RAIDレイアウトの変更。RAIDレイアウトの変更は、入力JSONボディにターゲットRAIDTypeとドライブのリストを提供することで実現されます。
      • POST #Volume.ChangeRAIDLayout: サイズ変更。ChangeRAIDLayoutを使用すると、RAIDTypeを変更せずに新しい未構成正常ドライブを追加することでボリュームのサイズを変更できます。このような場合、入力JSONボディでRAIDTypeを指定してはいけませんが、それに応じて完全なドライブリストを指定する必要があります。
      • PATCH Volume[CapacityBytes]: この操作は、ボリューム内に利用可能な未使用サイズがある場合にボリュームのサイズを変更するために使用されます。ここに新しいドライブを追加するスコープはありません
      • POST #Volume.CheckConsistency: この操作は、ボリューム上の整合性チェック操作を開始します。この操作では入力は想定されません。
    • Redfish Metrics GETサポート
      • StorageControllerMetrics: UncorrectableECCErrorCount、CorrectableECCErrorCount、CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount、SAS.LossOfDwordSynchronizationCount、SAS.RunningDisparityErrorCount、PCIeErrors.CorrectableErrorCount、PCIeErrors.FatalErrorCount、PCIeErrors.NonFatalErrorCount
      • 各カウンターは最大65535までの値を保持できます。カウンターが最大値に達しても、値はリセットされません。
      • ユーザーがコントローラーのNVRAMクリアまたはRedfish ResetToDefaults.ResetAllを実行すると、メトリックはクリアされます。
  • MRSAおよびstorcli工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加。
    • コントローラー上に構成が存在する場合、または固定キャッシュが存在する場合、NVRAMクリア操作は許可されません。
    • NVRAMをクリアした後、コントローラーFWはオンラインコントローラーリセット (OCR) を実行します。何らかの理由でOCRを実行できない場合は、システムを再起動するようにユーザーに通知されます。
    • NVRAMクリア操作は、機能的にはRedfish ResetToDefaults.ResetAll操作と同等です。
  • バックプレーンベイ数情報を、コントローラーに接続されている実際のベイに変更。非ホットプラグ構成の場合、コントローラーは常に16個のベイを表示します。
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • a00143124en_usアドバイザリを修正: HPE MR Gen11 コントローラー - HPE Gen11サーバー上のMR Gen11コントローラーがIMLで"WriteCacheDataLoss"を生成できない場合がある
  • a00148035en_usアドバイザリを修正: HPE MR Gen11コントローラー - ベイとボックスのNVMeドライブの場所がワンタイムブートメニューに表示されない
  • Linux OSでLTOの128KBを超える読み取り/書き込み転送が失敗する問題を修正
  • Backup ExecがLTOで動作しない問題を修正
  • 240個の論理ドライブが構成されている場合、サーバーのブート時にコントローラーがiLOによってドロップされる可能性がある問題を修正
  • ドライブを連続的に削除すると、サーバーヘルスが一時的にクリティカルを示すというまれな問題を修正
  • 予期しないPCIConfiglinkページイベント、仮想SESデバイスへのタスク管理のタイムアウトメッセージがsnapdumpに記録される問題を修正
  • 空のベイにスロット対応プロトコルがない問題を修正
  • コントローラーに接続されたLTOのリンク速度が[不明]と表示される問題を修正
  • Request Senseコマンドにより、サニタイズが進行中のドライブでタスク管理が実行される問題を修正。
  • 255を超える値が使用された場合に、Redfish PATCH StorageController[ControllerRates]がランダムな値を暗黙的に設定してしまう問題を修正。
  • コントローラーがパススルーとして構成されているときにVMを再起動すると、誤ったコントローラーエラーイベントが記録される可能性がある問題を修正
  • 2つのバックプレーンが同じストレージポートに接続されている場合、Redfishファブリックポートのアクティブ幅と現在の速度が間違っているという問題を修正。
  • 再起動後にNVMeドライブのリンクステータスが失敗する可能性があるというまれな問題を修正 
  • 複数のドライブの取り外しと挿入が短時間に行われたときにコントローラーがアサートされる可能性があるというまれな問題を修正
  • SATAパススルーコマンドが実行中の場合、SATAドライブのサニタイズのパーセンテージが進行しない問題を修正
  • NVMeドライブでサニタイズのパーセンテージが進行しない問題を修正
  • 読み取り/書き込みコマンドと非読み取り/書き込みコマンドの耐久テストでIOタイムアウトとデバイスリセットが発生することがあるというまれな問題を修正
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • RHEL 10のサポートを追加しました。
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery.
    • ]]>
  • This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery.
    • ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         バージョン28.44.1036には、以下の新機能と変更が含まれます。

    • NIC輻輳時にPause/PFCフレームの送信を遅延させるために、RXロスレスバッファーサイズを増やしました。
    • 並列処理を強化するために、割り当てフローと割り当て解除フローの新しいメカニズムを追加しました。
    • マルチホスト展開を使用する場合、各ホストには固有のポートとPFが割り当てられ、独自のLAGを管理します。
    • PCIeスイッチ構成のセットアップでfwresetを実行するためのツールとドライバーを含む新しい同期フローのサポートが追加されました。
    • 同じPF上の異なるVF間で統合PTPがサポートされるようになりました。
    • 新しいMADのサポートが追加されました: PortRecoveryPolicyConfigおよび PortRecoveryPolicyCounters 。PHY 回復プロセス中、ファームウェアコアはport_logical_stateをActiveとして示します。
    • 新しいNV構成 (SM_DISABLE、デフォルト0) が追加されました。これを有効にすると、SMから発信されていないSMPトラフィックがブロックされます。
    • PFCCアクセスレジスターのパラメーターとしてケーブル長を設定する機能を追加しました。ケーブルの長さは、サイズ、Xoff、Xon しきい値などの RXロスレスバッファーパラメーターの計算に使用されます。
    ]]>         New features and changes included in version 28.44.1036:

    • Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
    • Added a new mechanism for allocations and deallocations flows to enhance parallelism.
    • When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
    • Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
    • Unified PTP is now supported across different VFs on the same PF.
    • Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the  port_logical_state as Active.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         以下の問題点がバージョン28.44.1036で修正されました。

    • ケーブル情報セマフォのデッドロック。
    • TLV完全リストのエラー処理が不適切だったため、TLVメカニズムがハングしました。
    • SPDM GET_CERTIFICATE操作は、すべての証明書チェーンのオフセットとチャンクサイズをサポートしていませんでした。
    • VDPAにおける問題で、virtqがmkeyなしで作成された場合、またはライブマイグレーション中に人を介さずマッピングされたmkeyで作成された場合、virtqを破棄するとext_synd=0x8f33でヘルスバッファー症候群が発生します。
    • VDPA機能ビットGUEST_TSO4およびGUEST_TSO6が予期せずデフォルトで設定され、トラフィックの中断が発生しました。
    ]]>         The following issues have been fixed in version 28.44.1036:

    • Cable info semaphore deadlock.
    • Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
    • The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
    • An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
    • The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    特定のCPU温度エラーによって引き起こされる潜在的なシステムシャットダウンを防ぐための機能強化を導入しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Change the backplane bay count information to the actual bay that is connected to controller.
  • Add support for users to clear NVRAM using Factory Repurpose operation
  • Re-order MRSA GUI buttons
    • Move the Rebuild button to the top before Make Online button
    • Add the Rebuild button in the Offline Drive warning session
  • Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.
    • ]]>
  • Change the backplane bay count information to the actual bay that is connected to controller.
  • Add support for users to clear NVRAM using Factory Repurpose operation
  • Re-order MRSA GUI buttons
    • Move the Rebuild button to the top before Make Online button
    • Add the Rebuild button in the Offline Drive warning session
  • Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.
    • ]]>
  • Fix MRSA issue in a00150411en_us Advisory: HPE Compute MR Controllers - HPE MR Storage Administrator (MRSA) Launch Issue and Storage Command Line Interface (StorCLI) Installation Warning Message Observed With Red Hat Enterprise Linux Server 10
    • ]]>
  • Fix MRSA issue in a00150411en_us Advisory: HPE Compute MR Controllers - HPE MR Storage Administrator (MRSA) Launch Issue and Storage Command Line Interface (StorCLI) Installation Warning Message Observed With Red Hat Enterprise Linux Server 10
    • ]]>
  • バックプレーンベイ数情報を、コントローラーに接続されている実際のベイに変更。
  • 工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加
  • LSA GUIボタンの順序を変更
    • [Rebuild]ボタンを[Make Online]ボタンの前に移動
    • オフラインドライブの警告セッションに[Rebuild]ボタンを追加
  • 劣化したボリュームの推奨アクションを[Make sure all the participating drives are connected and rebuild is complete]に変更。
    • ]]>
  • Change the backplane bay count information to the actual bay that is connected to controller.
  • Add support for users to clear NVRAM using Factory Repurpose operation
  • Re-order LSA GUI buttons
    • Move the Rebuild button to the top before Make Online button
    • Add the Rebuild button in the Offline Drive warning session
  • Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.
    • ]]>
  • a00150411en_usアドバイザリのMRSAの問題を修正: HPE Compute MR Controllers - Red Hat Enterprise Linux Server 10でHPE MR Storage Administrator (MRSA) の起動問題とストレージコマンドラインインターフェイス (StorCLI) のインストールに関する警告メッセージが表示される
    • ]]>
  • Fix MRSA issue in a00150411en_us Advisory: HPE Compute MR Controllers - HPE MR Storage Administrator (MRSA) Launch Issue and Storage Command Line Interface (StorCLI) Installation Warning Message Observed With Red Hat Enterprise Linux Server 10
    • ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         ドライバーバージョン14.4.393.20にアップデートしました

    rawドライバーファイルは、Smartコンポーネントを解凍し、その後Emulexインストーラーを解凍することによって取得することができます。  次のコマンドを使用します。

        elxdrvr-fc-version.exe /q2 extract=2

    解凍されたファイルは次に置かれます。

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。  例、

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         ドライバーバージョン14.4.393.20にアップデートしました

    rawドライバーファイルは、Smartコンポーネントを解凍し、その後Emulexインストーラーを解凍することによって取得することができます。  次のコマンドを使用します。

        elxdrvr-fc-version.exe /q2 extract=2

    解凍されたファイルは次に置かれます。

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。  例、

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         初期バージョン。

    ]]>         Initial version.

    ]]>         初期バージョン。

    ]]>         Initial version.

    ]]>         Initial version.

    ]]>         Initial version.

    ]]>         Initial version.

    ]]>         Initial version.

    ]]>         .

    以下の修正がこのバージョンに含まれました：

    • メモリレポジトリを節約するためのコードの最適化。

    • エキスパンダーリセットが進行中のときに、espリセットを行う際にTLB例外が発生しました。

    • 周辺機器にpsoc 8.93バイナリを追加し、reveilleのバージョン番号をアップデートしました。

    • まったく新しいDelta PS-pmbusコードを追加し、ESPバージョン番号をアップデートしました。

    このファームウェアに関する修正のリスト、拡張、既知の問題および回避方法については、リリースノートを参照してください。

    ]]>         .

    The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>
  • Updated supported platforms
    • ]]>
  • Updated supported platforms
    • ]]>
  • サポートされるプラットフォームをアップデートしました
    • ]]>
  • Updated supported platforms
    • ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated supported environments
    • ]]>         最初のリリース

    ]]>         Initial release.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         DIMMのシリアル番号が"00000000"と識別された場合、IMLが記録されます。

    ]]>         An IML will be logged if the DIMM serial number is identified as "00000000"

    ]]>         重要な注意：

    システムROMのこのリビジョンには、AMD第5世代EPYCプロセッサー用のAMDリファレンスコードTurinPI 1.0.0.6が含まれています。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    Microsoft Secured-coreサポートが有効になっている場合にシステムがハングする可能性がある問題に対処しました。

    日本語でページを切り替えているときにRBSUでシステムがハングする可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This revision of the System ROM includes AMD reference code TurinPI 1.0.0.6 for AMD 5th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may hang when Microsoft secure-core support is enabled.

    Addressed an issue where system may hang at RBSU while switch pages in Japanese language.

    Known Issues:

    None]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Assertの修正、現在のファームウェアの改善、およびバグ修正を修正します。
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         • HPE ProLiant DL385 Gen11 サーバーで RTX 6000 Proアクセラレータを有効にしました。

    • NVIDIA RTX A1000アクセラレータのHPE iLO 6サポートを有効にしました。

    • UBM11でHPE iLO 6のサポートを有効にしました。

    • OCP/PCI カードのメイン温度センサーのフォールバックセンサーの有効化または無効化に対する HPE iLO 6サポートを有効にしました。

    • NVMe-MIファームウェアアップデートに対する HPE iLO 6サポートを有効にしました。

    • LDAPセッション永続性のサポート。

    • ホストの電源再投入時に仮想シリアルポート (VSP) ログを保持する機能。

    • HPE iLO GUIを使用して、トランスポート層セキュリティ (TLS) によるリモートsyslogの設定をサポートします。

    • GUIからESKMパスワードをローテーションするオプションが追加されました。

    • GUIにAC電源再投入のボタンを追加しました。

    • サーバーのPOST状態中にブート順序を変更できるようにするサポートが追加されました。

    • OCP/PCI カードのフォールバック温度センサーを有効または無効にするサポートが追加されました。

    ]]>         • Enabled RTX 6000 Pro Accelerator on HPE ProLiant DL385 Gen11 servers.

    • Enabled HPE iLO 6 support for NVIDIA RTX A1000 Accelerator.

    • Enabled HPE iLO 6 support for UBM11.

    • Enabled HPE iLO 6 support for fallback sensor enablement or dis-enablement of OCP/PCI card main temperature sensors.

    • Enabled HPE iLO 6 support for NVMe-MI firmware updates.

    • Support for LDAP session persistence.

    • Ability to retain Virtual Serial Port (VSP) logs upon host power cycle.

    • Support for configuring remote syslog with Transport Layer Security (TLS) using the HPE iLO GUI.

    • Added an option to rotate ESKM password from GUI.

    • Added an AC power-cycle as a button in the GUI.

    • Added support to allow boot order modifications during server POST state.

    • Added support to enable or disable fallback temperature sensors for OCP/PCI card.

    ]]>         • HPE iLO Intelligent Platform Management Interface (IPMI) コマンド (SDR タイプ メモリ) で一部のメモリセンサーレコードがリストされない問題を修正しました。

    • SFIC の生成に失敗し、redfish /v1/ResourceDirectory のURIが設定されなかった問題を修正しました。

    • LDAP/ディレクトリユーザーがローカルユーザーを作成できない問題を修正しました。

    • 日本語キーボードレイアウトを使用し、漢字キー[英語キーボードの` eq キー]を押したときに文字が重複する問題を修正しました。

    • HPE iLO6 Web GUI にプロセッサー 2 のステータスが正しく表示されない問題を修正しました。

    • Apollo サーバーの電源冗長性の OID が (1) の値しか返さない問題を修正しました。

    • PuTTYの新しいバージョンからのSSH接続が許可されない問題を修正しました。

    ]]>         • Fixed an issue of HPE iLO Intelligent Platform Management Interface (IPMI) command (SDR type memory) not listing some of the memory sensor records.

    • Fixed an issue where SFIC generation failed and the URIs in the redfish /v1/ResourceDirectory did not get populated.

    • Fixed an issue where an LDAP/Directory user was unable create a local user.

    • Fixed the repeated characters' issue when Japanese Keyboard Layout is used and Kanji key [English Keyboard ` eq key] was pressed.

    • Fixed an issue where HPE iLO6 Web GUI did not show the correct processor 2 status.

    • Fixed an issue where the OID for power supply redundancy was only returning a value of (1) for Apollo server.

    • Fixed an issue where SSH connections from later versions of PuTTY were not allowed.

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>         このファームウェアパッケージには、以下のファームウェアバージョンが含まれています。

    アダプター

    速度

    MBI

    ファームウェア

    UEFI

    ブートBIOS
    HPE SN1610Q 32Gbデュアルポートファイバーチャネルホストバスアダプター 32Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1610Q 32Gbシングルポートファイバーチャネルホストバスアダプター 32Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1700Q 64Gbデュアルポートファイバーチャネルホストバスアダプター 64Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1700Q 64Gbシングルポートファイバーチャネルホストバスアダプター 64Gb 02.11.01 09.15.05 7.39 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios
    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter 32Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter 32Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.01 09.15.05 7.39 0.0
    ]]>         以下を修正しました。

    • MarvellアダプターのオプションROM検証エラーが原因でPOST中にBitLocker回復がトリガーされ、システムがWindows OS を起動できなくなります。
    ]]>         Fixed the following:

    • BitLocker recovery is triggered during POST due to an option ROM verification failure on the Marvell adapter, preventing system to boot to Windows OS.
    ]]>         このファームウェアパッケージには、以下のファームウェアバージョンが含まれています。

    アダプター

    速度

    MBI

    ファームウェア

    UEFI

    ブートBIOS
    HPE SN1610Q 32Gbデュアルポートファイバーチャネルホストバスアダプター 32Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1610Q 32Gbシングルポートファイバーチャネルホストバスアダプター 32Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1700Q 64Gbデュアルポートファイバーチャネルホストバスアダプター 64Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1700Q 64Gbシングルポートファイバーチャネルホストバスアダプター 64Gb 02.11.01 09.15.05 7.39 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios
    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter 32Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter 32Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.01 09.15.05 7.39 0.0
    ]]>         以下を修正しました。

    1. Windows BitLockerにより、POST中にROM署名エラーが発生し、システムが起動します。
    2. SPI/フラッシュ読み取りの内部タイムアウト値を増やします。
    ]]>         Fixed the following:

    1. Windows BitLocker causes the system boot due to ROM signature failure during POST.
    2. Increase an internal timeout value for SPI/Flash read.
    ]]>
  • 強力なデバイス管理機能を確保するためのアウトオブバンドメッセージ処理の改善
  • デバイス管理機能の堅牢を確保するために、アウトオブバンドメッセージの改善
  • このファームウェアアップデートは、システムの相互運用性を向上させ、ドライブが応答しなくなる可能性のある特定のシナリオを防止するため、推奨されます。
    • ]]>
  • Improvements to our out-of-band message handling to ensure robust device management capabilities
  • Changes to improve our PCIe link compatibility as well as device reliability
  • This firmware update is recommended as it improves our system interoperability and prevents specific scenarios that could cause the drive to become unresponsive.
    • ]]>
  • 強力なデバイス管理機能を確保するためのアウトオブバンドメッセージ処理の改善
  • デバイス管理機能の堅牢を確保するために、アウトオブバンドメッセージの改善
  • このファームウェアアップデートは、システムの相互運用性を向上させ、ドライブが応答しなくなる可能性のある特定のシナリオを防止するため、推奨されます。
    • ]]>
  • Improvements to our out-of-band message handling to ensure robust device management capabilities
  • Changes to improve our PCIe link compatibility as well as device reliability
  • This firmware update is recommended as it improves our system interoperability and prevents specific scenarios that could cause the drive to become unresponsive.
    • ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated support environments
    • ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated support environments
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • このメンテナンスリビジョンにより、データの完全性が向上します。  このファームウェアにアップグレードしない場合のリスクは、特定のエラーやタイミング条件でデータが破損する可能性が高まることです。
  • 詳しくは、HPEカスタマーアドバイザリ: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00138902en_us（2024年4月24日に有効になります）を参照してください。
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00138902en_us which will be active on 24-April-2024.
    • ]]>         重要な注意：

    なし

    ファームウェアの依存関係:

    なし

    機能強化/新しい機能：

    これは、このファームウェアでの最初のバージョンです。

    既知の問題点：

    なし

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This is the initial verison of the firmware.

    Known Issues:

    None

    ]]>         Added Support for RHEL 10

    ]]>         Added Support for RHEL 10

    ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Change the backplane bay count information to the actual bay that is connected to controller.
  • Add support for users to clear NVRAM using Factory Repurpose operation
  • Re-order MRSA GUI buttons
    • Move the Rebuild button to the top before Make Online button
    • Add the Rebuild button in the Offline Drive warning session
  • Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.
    • ]]>
  • Change the backplane bay count information to the actual bay that is connected to controller.
  • Add support for users to clear NVRAM using Factory Repurpose operation
  • Re-order MRSA GUI buttons
    • Move the Rebuild button to the top before Make Online button
    • Add the Rebuild button in the Offline Drive warning session
  • Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.
    • ]]>
  • Fix MRSA issue in a00150411en_us Advisory: HPE Compute MR Controllers - HPE MR Storage Administrator (MRSA) Launch Issue and Storage Command Line Interface (StorCLI) Installation Warning Message Observed With Red Hat Enterprise Linux Server 10
    • ]]>
  • Fix MRSA issue in a00150411en_us Advisory: HPE Compute MR Controllers - HPE MR Storage Administrator (MRSA) Launch Issue and Storage Command Line Interface (StorCLI) Installation Warning Message Observed With Red Hat Enterprise Linux Server 10
    • ]]>
  • バックプレーンベイ数情報を、コントローラーに接続されている実際のベイに変更。
  • 工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加
  • LSA GUIボタンの順序を変更
    • [Rebuild]ボタンを[Make Online]ボタンの前に移動
    • オフラインドライブの警告セッションに[Rebuild]ボタンを追加
  • 劣化したボリュームの推奨アクションを[Make sure all the participating drives are connected and rebuild is complete]に変更。
    • ]]>
  • Change the backplane bay count information to the actual bay that is connected to controller.
  • Add support for users to clear NVRAM using Factory Repurpose operation
  • Re-order LSA GUI buttons
    • Move the Rebuild button to the top before Make Online button
    • Add the Rebuild button in the Offline Drive warning session
  • Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.
    • ]]>
  • a00150411en_usアドバイザリのMRSAの問題を修正: HPE Compute MR Controllers - Red Hat Enterprise Linux Server 10でHPE MR Storage Administrator (MRSA) の起動問題とストレージコマンドラインインターフェイス (StorCLI) のインストールに関する警告メッセージが表示される
    • ]]>
  • Fix MRSA issue in a00150411en_us Advisory: HPE Compute MR Controllers - HPE MR Storage Administrator (MRSA) Launch Issue and Storage Command Line Interface (StorCLI) Installation Warning Message Observed With Red Hat Enterprise Linux Server 10
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         今回のリリースで解決した問題については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         今回のリリースで解決した問題については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>         Implemented new power supply redundancy rules.

    ]]>         Implemented new power supply redundancy rules.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code TurinPI 1.0.0.5 for AMD 5th Generation EPYC processors. This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue with temperature reporting for H200.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code TurinPI 1.0.0.5 for AMD 5th Generation EPYC processors. This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue with temperature reporting for H200.

    Known Issues:

    None]]>         重要な注意：

    システムROMのこのリビジョンには、AMD第5世代EPYCプロセッサー用のAMDリファレンスコードTurinPI 1.0.0.5が含まれています。 システムROMのこのリビジョンには、AMD第4世代EPYCプロセッサー用のAMDリファレンスコードGenoaPI 1.0.0.Fが含まれています。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    システムのオーバーヒートによりPCIeデバイスが見つからない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This revision of the System ROM includes AMD reference code TurinPI 1.0.0.5 for AMD 5th Generation EPYC processors. This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where PCIe devices might be missing due to system overheating.

    Known Issues:

    None]]>
  • Driver update
    • ]]>
  • Driver update
    • ]]>
  • ドライバーアップデート
    • ]]>
  • Driver update
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • 工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加
    • コマンド: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • 直接接続されたNVMeファームウェアのフラッシュの表示メッセージを修正し、OSによるFWアクティベーションの結果を揃えます。
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • このFWPKGからROMフラッシュウェイを削除します。
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • キューのフル処理プロセスでエラーが見つかりました。その結果、FUAビットが適切に設定されず、ドライブの自発的なリセットを発生させる可能性があります。
  • キューのフル処理プロセスの間にFUAビットの処理を解決するFWの修正が実装されました。
  • FWは、キューのフル処理状況でドライブがリセットされる問題を解決することが確認されました。
    • ]]>
  • An error was found in the queue fullhandling process that results in the FUA bit not getting properly set, which could lead to the drive self-initiated reset
  • The FW fix is to resolve the handling of FUA bit during the queue full handling process has been implemented
  • The FW was confirmed to resolve the issue of drives resetting under queue full handling situations.
    • ]]>         この製品は、ファームウェアをアップデートした後に、BCM5719 4ポートアダプターのポート3および4でMBA構成がデフォルトにリセットされる問題を修正します。

    ]]>         This product fixes an issue where MBA configuration reset to defaults on port 3 and 4 for BCM5719 4-port adapters after updating firmware.

    ]]>         この製品は、ファームウェアのアップデート後にMBA構成がデフォルトにリセットされる問題を修正します。

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         TBD

    ]]>         TBD

    ]]>
  • この製品は、構成を簡素化するために、Ethernet/LLDPTransmit/ManagementVlanIdプロパティを削除します。
  • この製品は、BNXTドライバーのコアダンプ機能を強化し、診断を向上させます。
  • この製品は、よりクリーンなインターフェイスを実現するために、HII MBAメニューを抑制するドライバーのアップデートを強化しています。
    • ]]>
  • This product removes the Ethernet/LLDPTransmit/ManagementVlanId property to streamline configuration.
  • This product enhances the coredump feature in the BNXT driver for improved diagnostics.
  • This product enhances to update the driver to suppress the HII MBA menu for a cleaner interface.
    • ]]>
  • この製品は、システム内でOCPモジュールのリンク幅が低下する問題を修正します。
  • この製品は、RDMA接続が確立されない問題を修正します。
  • この製品は、RoCEおよびTX/RXパスコアダンプのデコードが失敗する問題を修正します。
  • この製品は、ESXiでポート1がブロードキャストパケットを受信できない問題を修正します。
  • この製品は、システム内でOCPモジュールのリンク幅が低下する問題を修正します。
  • この製品は、VLAN構成でPXEブートが機能しない問題を修正します。
    • ]]>
  • This product fixes the issue where the OCP module experiences link width degradation in the system.
  • This product fixes the issue where RDMA connections are not getting connected.
  • This product fixes the issue where RoCE and TX/RX path core dump decoding failed.
  • This product fixes the issue where Port 1 was not receiving broadcast packets with ESXi.
  • This product fixes the issue where the OCP module experiences link width degradation in the system.
  • This product fixes the issue where PXE boot does not work with VLAN configurations.
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • Improve the FW about data mismatch after SPL issued.
    • ]]>
  • Improve the FW about data mismatch after SPL issued.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Azure Stack HCI 23H2のサポートを追加しました
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • 直接接続されたNVMeファームウェアのフラッシュの表示メッセージを修正し、OSによるFWアクティベーションの結果を揃えます。
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>         VMware ESXi 9.0 をサポートします

    ]]>         Support VMware ESXi 9.0.

    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • Improves performance in certain file systems and implements fixes for several of the previous firmware’s shortcomings.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Improves performance in certain file systems and implements fixes for several of the previous firmware’s shortcomings.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • このメンテナンスリビジョンにより、データの完全性が向上します。
  • このファームウェアにアップグレードしない場合のリスクは、特定のエラーやタイミング条件でデータが破損する可能性が高まることです。
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • DMTF PLDM Redfish デバイス有効化の機能強化
    • Redfishボリューム変換サポート
      • POST #Volume.ChangeRAIDLayout: RAIDレイアウトの変更。RAIDレイアウトの変更は、入力JSONボディにターゲットRAIDTypeとドライブのリストを提供することで実現されます。
      • POST #Volume.ChangeRAIDLayout: サイズ変更。ChangeRAIDLayoutを使用すると、RAIDTypeを変更せずに新しい未構成正常ドライブを追加することでボリュームのサイズを変更できます。このような場合、入力JSONボディでRAIDTypeを指定してはいけませんが、それに応じて完全なドライブリストを指定する必要があります。
      • PATCH Volume[CapacityBytes]: この操作は、ボリューム内に利用可能な未使用サイズがある場合にボリュームのサイズを変更するために使用されます。ここに新しいドライブを追加するスコープはありません
      • POST #Volume.CheckConsistency: この操作は、ボリューム上の整合性チェック操作を開始します。この操作では入力は想定されません。
    • Redfish Metrics GETサポート
      • StorageControllerMetrics: UncorrectableECCErrorCount、CorrectableECCErrorCount、CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount、SAS.LossOfDwordSynchronizationCount、SAS.RunningDisparityErrorCount、PCIeErrors.CorrectableErrorCount、PCIeErrors.FatalErrorCount、PCIeErrors.NonFatalErrorCount
      • 各カウンターは最大65535までの値を保持できます。カウンターが最大値に達しても、値はリセットされません。
      • ユーザーがコントローラーのNVRAMクリアまたはRedfish ResetToDefaults.ResetAllを実行すると、メトリックはクリアされます。
  • MRSAおよびstorcli工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加。
    • コントローラー上に構成が存在する場合、または固定キャッシュが存在する場合、NVRAMクリア操作は許可されません。
    • NVRAMをクリアした後、コントローラーFWはオンラインコントローラーリセット (OCR) を実行します。何らかの理由でOCRを実行できない場合は、システムを再起動するようにユーザーに通知されます。
    • NVRAMクリア操作は、機能的にはRedfish ResetToDefaults.ResetAll操作と同等です。
  • バックプレーンベイ数情報を、コントローラーに接続されている実際のベイに変更。非ホットプラグ構成の場合、コントローラーは常に16個のベイを表示します。
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • a00143124en_usアドバイザリを修正: HPE MR Gen11 コントローラー - HPE Gen11サーバー上のMR Gen11コントローラーがIMLで"WriteCacheDataLoss"を生成できない場合がある
  • a00148035en_usアドバイザリを修正: HPE MR Gen11コントローラー - ベイとボックスのNVMeドライブの場所がワンタイムブートメニューに表示されない
  • Linux OSでLTOの128KBを超える読み取り/書き込み転送が失敗する問題を修正
  • Backup ExecがLTOで動作しない問題を修正
  • 240個の論理ドライブが構成されている場合、サーバーのブート時にコントローラーがiLOによってドロップされる可能性がある問題を修正
  • ドライブを連続的に削除すると、サーバーヘルスが一時的にクリティカルを示すというまれな問題を修正
  • 予期しないPCIConfiglinkページイベント、仮想SESデバイスへのタスク管理のタイムアウトメッセージがsnapdumpに記録される問題を修正
  • 空のベイにスロット対応プロトコルがない問題を修正
  • コントローラーに接続されたLTOのリンク速度が[不明]と表示される問題を修正
  • Request Senseコマンドにより、サニタイズが進行中のドライブでタスク管理が実行される問題を修正。
  • 255を超える値が使用された場合に、Redfish PATCH StorageController[ControllerRates]がランダムな値を暗黙的に設定してしまう問題を修正。
  • コントローラーがパススルーとして構成されているときにVMを再起動すると、誤ったコントローラーエラーイベントが記録される可能性がある問題を修正
  • 2つのバックプレーンが同じストレージポートに接続されている場合、Redfishファブリックポートのアクティブ幅と現在の速度が間違っているという問題を修正。
  • 再起動後にNVMeドライブのリンクステータスが失敗する可能性があるというまれな問題を修正 
  • 複数のドライブの取り外しと挿入が短時間に行われたときにコントローラーがアサートされる可能性があるというまれな問題を修正
  • SATAパススルーコマンドが実行中の場合、SATAドライブのサニタイズのパーセンテージが進行しない問題を修正
  • NVMeドライブでサニタイズのパーセンテージが進行しない問題を修正
  • 読み取り/書き込みコマンドと非読み取り/書き込みコマンドの耐久テストでIOタイムアウトとデバイスリセットが発生することがあるというまれな問題を修正
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • To fix 1) chip kill -The host IO CMD may get timed out and shows SNS=04/40/C2 and 2) garbage collection checking for performance recovery.
    • ]]>
  • To fix 1) chip kill -The host IO CMD may get timed out and shows SNS=04/40/C2 and 2) garbage collection checking for performance recovery.
    • ]]>
  • ドライブヘルスのクエリが誤ったドライブ予測エラーを引き起こす可能性がある稀なケースに対処するための修正を追加しました。
  • 詳しくは、HPEカスタマーアドバイザリ：https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00146367en_us (2025年3月20日から有効) を参照してください。
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00146367en_us which will be active on 20-Mar-2025.
    • ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • This product fixes an issue where the bugcheck D1 occurs when in the Jumbo frame scenario.
  • This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.
    • ]]>
  • This product fixes an issue where the bugcheck D1 occurs when in the Jumbo frame scenario.
  • This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.
    • ]]>         初期バージョン。

    ]]>         Initial version.

    ]]>
  • このFWPKGからROMフラッシュウェイを削除します。
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • This firmware version fixes a bug with the unmap command that may cause a drive hang
    • ]]>
  • This firmware version fixes a bug with the unmap command that may cause a drive hang
    • ]]>
  • Support Gen12 servers.
    • ]]>
  • Support Gen12 servers.
    • ]]>         For Gen11 PR3 & 2023 March MSB

    ]]>         For Gen11 PR3 & 2023 March MSB

    ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Assertの修正、現在のファームウェアの改善、およびバグ修正を修正します。
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>         重要な注意:

    Ver 1.2.2(E)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver 1.2.2 ファームウェアをバージョン1.2.2にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョンEにアップグレードする必要はありません。

    このLinuxコンポーネントは、Service Pack for ProLiant 2024.11.00.00以降と互換性があります。

    ファームウェアの依存関係：

    なし

    機能強化/新しい機能：

    これは、このファームウェアでの最初のバージョンです。

    既知の問題点：

    なし

    ]]>         Important Notes:

    Ver. 1.2.2(E) contains updates to the firmware packaging and is functionally equivalent to ver. 1.2.2. It is not necessary to upgrade with Revision E if a previous component revision was used to upgrade the firmware to version 1.2.2.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00 and later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This is the initial verison of the firmware.

    Known Issues:

    None

    ]]>         重要な注意：

    Ver 1.2.2(C)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver 1.2.2と同等です。ファームウェアをバージョン1.2.2にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョンCにアップグレードする必要はありません。

    ファームウェアの依存関係：

    なし

    機能強化/新しい機能：

    これは、このファームウェアでの最初のバージョンです。

    既知の問題点：

    なし

    ]]>         Important Notes:

    Ver. 1.2.2(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.2.2. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.2.2.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This is the initial verison of the firmware.

    Known Issues:

    None

    ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、現在Red Hat Enterprise Linux 9.5をサポートします。

    ]]>         This product now supports Red Hat Enterprise Linux 9.5.

    ]]>         この製品は、カーネルのコンパイルの問題を修正します。

    ]]>         This product fixes the kernel compilation issue.

    ]]>         Driver version 5.4.82.1

    ]]>         Driver version 5.4.82.1

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>
  •   Windows Server 2025のサポートを追加しました。
  • Windows Server 2025のDMA再マッピング機能を有効にするサポートが追加されました。
    • ]]>
  • Added support for Windows Server 2025.
  • Added support to enable DMA remapping feature for Windows Server 2025.
    • ]]>
  • リモートキー管理モードが有効になっている場合にメモリダンプをキャプチャーできない場合がある問題を修正しました。
    • ]]>
  • Fixed the issue that memory dump sometimes cannot be captured when Remote Key Management mode is enabled.
    • ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、NICのHIIメニューで送信バランス機能が有効になっている場合にiceドライバーのロードに失敗していた問題を修正します。

    ]]>         This product fixes an issue where the ice driver failed to load when the transmit balancing feature was enabled in the NIC HII menu.

    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         重要：セキュリティ強化の機能改善 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能改善が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのバージョンにアップグレードすることを推奨します。

     

    バージョン16.35.4030には、以下の新機能と変更が含まれます。

    • 特定の宛先に向けられたトラフィックのQPタイムアウト「再試行超過」エラーを延期するためのサポートが追加されました。この新しい機能により、ライブマイグレーションによるダウンタイム中に宛先への接続が切断されることが防止されます。
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         以下の問題点がバージョン16.35.4030で修正されました。

    • VF FLRは、そのPFがFLRもトリガーするとスタックします。
    • ファームウェアがRoCEソースUDPポート制御の非PFドライバー構成 (SET_HCA_CAP.sw_r_roce_src_udp_portで設定) を無視したときに、RoCEパケットに予期しないソースUDPポートが表示されました。
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Initial release version.

    ]]>         Initial release version.

    ]]>         最初のリリースバージョンです。

    ]]>         Initial release version.

    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         DIMMのシリアル番号が"00000000"と識別された場合、IMLが記録されます。

    ]]>         An IML will be logged if the DIMM serial number is identified as "00000000"

    ]]>         重要な注意：

    システムROMのこのリビジョンには、AMD第5世代EPYCプロセッサー用のAMDリファレンスコードTurinPI 1.0.0.6が含まれています。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    Microsoft Secured-coreサポートが有効になっている場合にシステムがハングする可能性がある問題に対処しました。

    日本語でページを切り替えているときにRBSUでシステムがハングする可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This revision of the System ROM includes AMD reference code TurinPI 1.0.0.6 for AMD 5th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may hang when Microsoft secure-core support is enabled.

    Addressed an issue where system may hang at RBSU while switch pages in Japanese language.

    Known Issues:

    None]]>         This product fixes to align DDP with the new FW version and NVM 4.71.

    ]]>         This product fixes to align DDP with the new FW version and NVM 4.71.

    ]]>         この製品は現在、新しいプラットフォームでサポートされています。

    ]]>         This product is now supported on a new platform.

    ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>         ドライバーをバージョン10.02.14.00-k1にアップデートしました

    ]]>         Updated Driver version 10.02.14.00-k1

    ]]>         以下のサポートを追加しました。

    Red Hat Enterprise Linux 10

    ドライバーをバージョン10.02.14.00-k1にアップデートしました

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Updated Driver version 10.02.14.00-k1

    ]]>
  • Improve the FW about data mismatch after SPL
    • ]]>
  • Improve the FW about data mismatch after SPL
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         DIMMのシリアル番号が"00000000"と識別された場合、IMLが記録されます。

    ]]>         An IML will be logged if the DIMM serial number is identified as "00000000"

    ]]>         重要な注意：

    システムROMのこのリビジョンには、AMD第5世代EPYCプロセッサー用のAMDリファレンスコードTurinPI 1.0.0.6が含まれています。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    Microsoft Secured-coreサポートが有効になっている場合にシステムがハングする可能性がある問題に対処しました。

    日本語でページを切り替えているときにRBSUでシステムがハングする可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This revision of the System ROM includes AMD reference code TurinPI 1.0.0.6 for AMD 5th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may hang when Microsoft secure-core support is enabled.

    Addressed an issue where system may hang at RBSU while switch pages in Japanese language.

    Known Issues:

    None]]>         To eliminate the risk of gen drop issue.

    ]]>         To eliminate the risk of gen drop issue.

    ]]>
  • FW update to eliminate the risk of Drive missing issue.
  • Fixed low sequential write performance in Windows 2022
    • ]]>
  • FW update to eliminate the risk of Drive missing issue.
  • Fixed low sequential write performance in Windows 2022
    • ]]>
  • This firmware provides bug fixes for the P5620/P5520.
    • ]]>
  • This firmware provides bug fixes for the P5620/P5520.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • ファームウェアバージョンHPDBを修正し、供給の継続性のために最新のNAND世代との互換性を追加します。
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Updated Supported Device
  • Updated SBOM requirement
    • ]]>
  • Updated Supported Device
  • Updated SBOM requirement
    • ]]>         最初のリリース

    ]]>         Initial release.

    ]]>         TBD

    ]]>         TBD

    ]]>         This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

    ]]>         This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

    ]]>         Enhanced ROM error logging when DIMM serial number is identified as "00000000".

    ]]>         Enhanced ROM error logging when DIMM serial number is identified as "00000000".

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Catlow Refresh MR2 BKC. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where incorrect Structure Boot Name showed in the OS boot option.

    Addressed an issue where system may hang while switching RBSU pages in multi-language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Catlow Refresh MR2 BKC. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where incorrect Structure Boot Name showed in the OS boot option.

    Addressed an issue where system may hang while switching RBSU pages in multi-language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         複数言語の翻訳をアップデートしました。

    "スムーズな冷却"RBSUオプションのヘルプテキストを追加しました。

    ]]>         Updated multi-language translation.

    Added the help text for "Smooth Cooling" RBSU option.

    ]]>         重要な注記：

    このバージョンのシステムROMには、Intel Catlow Refresh MR1 BKCに合わせたアップデートが含まれています。 このバージョンのシステムROMは、Server Platform Services (SPS) ファームウェア06.03.04.058.0 (2.20_03_03_2025) と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題：

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Catlow Refresh MR1 BKC. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Known Issues:

    None]]>         ドライバーをバージョン10.02.14.00-k1にアップデートしました

    ]]>         Updated Driver version 10.02.14.00-k1

    ]]>         以下のサポートを追加しました。

    Red Hat Enterprise Linux 10

    ドライバーをバージョン10.02.14.00-k1にアップデートしました

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Updated Driver version 10.02.14.00-k1

    ]]>
  • A Drive Firmware enhancement has been made for  Primera 600 products to reduce the probability of infrequent, unexpected power loss on some backed drives.
    • ]]>
  • A Drive Firmware enhancement has been made for  Primera 600 products to reduce the probability of infrequent, unexpected power loss on some backed drives.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • これはファームウェアメンテナンスリリースです。その他のバグ修正と改善とともに、潜在的なデータロスの問題に対処します。
  • 詳しくは、HPE顧客向け報告：https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_usを参照してください。
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us.
    • ]]>
  • これはファームウェアメンテナンスリリースです。その他のバグ修正と改善とともに、潜在的なデータロスの問題に対処します。
  • 詳しくは、HPE顧客向け報告：https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us (2025年8月18日から有効) を参照してください。
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us which will be active on 18-Aug-2025.
    • ]]>
  • これはファームウェアメンテナンスリリースです。その他のバグ修正と改善とともに、潜在的なデータロスの問題に対処します。
  • 詳しくは、HPE顧客向け報告：https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_usを参照してください。
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us.
    • ]]>
  • これはファームウェアメンテナンスリリースです。その他のバグ修正と改善とともに、潜在的なデータロスの問題に対処します。
  • 詳しくは、HPE顧客向け報告：https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us (2025年8月18日から有効) を参照してください。
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us which will be active on 18-Aug-2025.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>
  • Driver update
  • Updated supported platforms
    • ]]>
  • Driver update
  • Updated supported platforms
    • ]]>
  • ドライバーアップデート
    • ]]>
  • Driver update
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • リセットの問題と定期的なメンテナンスファームウェアアップデートを修正しました。
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery.
    • ]]>
  • This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery.
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • 工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加
    • コマンド: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

    ]]>         This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.058.0 (2.20_03_03_2025) should be paired with System ROM 2.20_03-21-2025.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.058.0 (2.20_03_03_2025) should be paired with System ROM 2.20_03-21-2025.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

    Known Issues:

    None]]>         重要な注意:

    このバージョンのServer Platform Services（SPS）ファームウェアには、Intel Xeon E-2400シリーズプロセッサー用の最新パッケージが含まれています。 このバージョンのSPS 6.03.04.048.0 (2.10_12_03_2024)は、システムROM 2.10_12-06-2024と組み合わせる必要があります。

    ファームウェアの依存関係：

    なし

    機能強化/新しい機能：

    このバージョンは、Intel Catlow RPL-E PLR2 および Intel Catlow RPL-E Refresh PV ガイダンスに準拠しています。

    既知の問題点:

    なし]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.048.0 (2.10_12_03_2024) should be paired with System ROM 2.10_12-06-2024.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel Catlow RPL-E PLR2 and Intel Catlow RPL-E Refresh PV guidance.

    Known Issues:

    None]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         • HPE ProLiant DL385 Gen11 サーバーで RTX 6000 Proアクセラレータを有効にしました。

    • NVIDIA RTX A1000アクセラレータのHPE iLO 6サポートを有効にしました。

    • UBM11でHPE iLO 6のサポートを有効にしました。

    • OCP/PCI カードのメイン温度センサーのフォールバックセンサーの有効化または無効化に対する HPE iLO 6サポートを有効にしました。

    • NVMe-MIファームウェアアップデートに対する HPE iLO 6サポートを有効にしました。

    • LDAPセッション永続性のサポート。

    • ホストの電源再投入時に仮想シリアルポート (VSP) ログを保持する機能。

    • HPE iLO GUIを使用して、トランスポート層セキュリティ (TLS) によるリモートsyslogの設定をサポートします。

    • GUIからESKMパスワードをローテーションするオプションが追加されました。

    • GUIにAC電源再投入のボタンを追加しました。

    • サーバーのPOST状態中にブート順序を変更できるようにするサポートが追加されました。

    • OCP/PCI カードのフォールバック温度センサーを有効または無効にするサポートが追加されました。

    ]]>         • Enabled RTX 6000 Pro Accelerator on HPE ProLiant DL385 Gen11 servers.

    • Enabled HPE iLO 6 support for NVIDIA RTX A1000 Accelerator.

    • Enabled HPE iLO 6 support for UBM11.

    • Enabled HPE iLO 6 support for fallback sensor enablement or dis-enablement of OCP/PCI card main temperature sensors.

    • Enabled HPE iLO 6 support for NVMe-MI firmware updates.

    • Support for LDAP session persistence.

    • Ability to retain Virtual Serial Port (VSP) logs upon host power cycle.

    • Support for configuring remote syslog with Transport Layer Security (TLS) using the HPE iLO GUI.

    • Added an option to rotate ESKM password from GUI.

    • Added an AC power-cycle as a button in the GUI.

    • Added support to allow boot order modifications during server POST state.

    • Added support to enable or disable fallback temperature sensors for OCP/PCI card.

    ]]>         • HPE iLO Intelligent Platform Management Interface (IPMI) コマンド (SDR タイプ メモリ) で一部のメモリセンサーレコードがリストされない問題を修正しました。

    • SFIC の生成に失敗し、redfish /v1/ResourceDirectory のURIが設定されなかった問題を修正しました。

    • LDAP/ディレクトリユーザーがローカルユーザーを作成できない問題を修正しました。

    • 日本語キーボードレイアウトを使用し、漢字キー[英語キーボードの` eq キー]を押したときに文字が重複する問題を修正しました。

    • HPE iLO6 Web GUI にプロセッサー 2 のステータスが正しく表示されない問題を修正しました。

    • Apollo サーバーの電源冗長性の OID が (1) の値しか返さない問題を修正しました。

    • PuTTYの新しいバージョンからのSSH接続が許可されない問題を修正しました。

    ]]>         • Fixed an issue of HPE iLO Intelligent Platform Management Interface (IPMI) command (SDR type memory) not listing some of the memory sensor records.

    • Fixed an issue where SFIC generation failed and the URIs in the redfish /v1/ResourceDirectory did not get populated.

    • Fixed an issue where an LDAP/Directory user was unable create a local user.

    • Fixed the repeated characters' issue when Japanese Keyboard Layout is used and Kanji key [English Keyboard ` eq key] was pressed.

    • Fixed an issue where HPE iLO6 Web GUI did not show the correct processor 2 status.

    • Fixed an issue where the OID for power supply redundancy was only returning a value of (1) for Apollo server.

    • Fixed an issue where SSH connections from later versions of PuTTY were not allowed.

    ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         バージョン28.44.1036には、以下の新機能と変更が含まれます。

    • NIC輻輳時にPause/PFCフレームの送信を遅延させるために、RXロスレスバッファーサイズを増やしました。
    • 1Gリンク速度でのSyncEのサポートが追加されました。
    • 並列処理を強化するために、割り当てフローと割り当て解除フローの新しいメカニズムを追加しました。
    • マルチホスト展開を使用する場合、各ホストには固有のポートとPFが割り当てられ、独自のLAGを管理します。
    • PCIeスイッチ構成のセットアップでfwresetを実行するためのツールとドライバーを含む新しい同期フローのサポートが追加されました。
    • 同じPF上の異なるVF間で統合PTPがサポートされるようになりました。
    • 新しいMADのサポートが追加されました: PortRecoveryPolicyConfigおよび PortRecoveryPolicyCounters 。PHY回復プロセス中、ファームウェアコアはport_logical_stateをActiveとして示します。
    • 新しいNV構成 (SM_DISABLE、デフォルト0) が追加されました。これを有効にすると、SMから発信されていないSMPトラフィックがブロックされます。
    • PFCCアクセスレジスターのパラメーターとしてケーブル長を設定する機能を追加しました。ケーブルの長さは、サイズ、Xoff、Xon しきい値などの RXロスレスバッファーパラメーターの計算に使用されます。
    ]]>         New features and changes included in version 28.44.1036:

    • Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
    • Added support for SyncE at 1G link speed.
    • Added a new mechanism for allocations and deallocations flows to enhance parallelism.
    • When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
    • Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
    • Unified PTP is now supported across different VFs on the same PF.
    • Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the  port_logical_state as Active.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         以下の問題点がバージョン28.44.1036で修正されました。

    • ケーブル情報セマフォのデッドロック。
    • TLV完全リストのエラー処理が不適切だったため、TLVメカニズムがハングしました。
    • SPDM GET_CERTIFICATE操作は、すべての証明書チェーンのオフセットとチャンクサイズをサポートしていませんでした。
    • VDPAにおける問題で、virtqがmkeyなしで作成された場合、またはライブマイグレーション中に人を介さずマッピングされたmkeyで作成された場合、virtqを破棄するとext_synd=0x8f33でヘルスバッファー症候群が発生します。
    • VDPA機能ビットGUEST_TSO4およびGUEST_TSO6が予期せずデフォルトで設定され、トラフィックの中断が発生しました。
    • PCC NPを有効にし、リンクタイプを1つのポートにIB、もう1つのポートにEthernetを設定すると、dmesgにext_synd 0x8309のアサートが表示される可能性があります。
    ]]>         The following issues have been fixed in version 28.44.1036:

    • Cable info semaphore deadlock.
    • Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
    • The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
    • An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
    • The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
    • Enabling PCC NP and setting the link type to one port as IB and the other as Ethernet could cause an assert to appear in dmesg with ext_synd 0x8309.
    ]]>         今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         今回のリリースで解決した問題については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         今回のリリースで解決した問題については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel Xeon Scalable Processors. This version of the SPS should be paired with System ROM 2.60 (08/07/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version is in compliance with Intel IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel Xeon Scalable Processors. This version of the SPS should be paired with System ROM 2.60 (08/07/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version is in compliance with Intel IPU 2025.3 guidance.

    Known Issues:

    None]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         For SEP2025 SPP

    ]]>         For SEP2025 SPP

    ]]>
  • RHEL10サポートを追加しました
    • ]]>
  • Added RHEL10 support
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1620E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.30

    14.4.473.30

    14.4.473.29

    14.4.469.0
    HPE SN1720E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.30 14.4.473.30 14.4.473.29 14.4.469.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1620E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.30

    14.4.473.30

    14.4.473.29

    14.4.469.0
    HPE SN1720E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.30 14.4.473.30 14.4.473.29 14.4.469.0
    ]]>         このファームウェアパッケージには、以下のファームウェアバージョンが含まれています。

    アダプター

    速度

    Universal Boot Image

    ファームウェア

    UEFI

    ブートBIOS

    HPE SN1620E 32Gbデュアルポートファイバーチャネルホストバスアダプター

    32Gb

    14.4.473.24

    14.4.473.24

    14.4.473.8

    14.4.469.0
    HPE SN1720E 64Gbデュアルポートファイバーチャネルホストバスアダプター 64Gb 14.4.473.24 14.4.473.24 14.4.473.8 14.4.469.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1620E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.24

    14.4.473.24

    14.4.473.8

    14.4.469.0
    HPE SN1720E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.24 14.4.473.24 14.4.473.8 14.4.469.0
    ]]>         TBD

    ]]>         TBD

    ]]>
  • この製品は、トンネルベースのTPA (TCP パケット集約) のサポートを追加するように強化されています。
  • この製品は、コアダンプファイルの概要を生成するためのコアダンプ機能を強化します。
    • ]]>
  • This product enhances to add support for Tunnel based TPA (TCP Packet Aggregation).
  • This product enhances the coredump feature for generating the summary of a coredump file.
    • ]]>         ドライバーバージョン5.4.85.0-1
    このドライバーは、VMware ESXi 8.0u3でのみサポートされています。

    ]]>         Driver version 5.4.85.0-1
    This driver is only supported on VMware ESXi 8.0u3

    ]]>         ドライバーバージョン5.4.83.1
    このドライバーは、VMware ESXi 8.0u3でのみサポートされています。

    ]]>         Driver version 5.4.83.1
    This driver is only supported on VMware ESXi 8.0u3

    ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Azure Stack HCI 23H2のサポートを追加しました
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    特定のCPU温度エラーによって引き起こされる潜在的なシステムシャットダウンを防ぐための機能強化を導入しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • ESXi 9.0のサポートを追加しました
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Updated Supported Environments
    • ]]>         最初のリリース

    ]]>         Initial release

    ]]>         TBD

    ]]>         TBD

    ]]>
  • この製品では、TMFIFO インターフェイスを介した大容量ファイルの転送が失敗する問題が修正されました。
  • この製品では、小さすぎるバッファーサイズを使用することで発生する問題を修正 しました。
  • この製品では、サポートされている速度が現在の速度として表示されるか、その逆となる、イベントID 401の問題を修正しました。
  • この製品は、カウンターセット「Mellanox WinOF-2 VF Port Traffic」内の特定のカウンターが、perfmonでまれに無効な値を表示する問題を修正しました。
    • ]]>
  • This product fixed an issue that caused large file transfers over the TMFIFO interface to fail.
  • This product fixed an issue that caused by using a buffer size that was too small.
  • This product fixed an issue in event ID 401, where the supported speed was displayed as the current speed and vice versa.
  • This product fixed an issue where certain counters in the counter set "Mellanox WinOF-2 VF Port Traffic" would occasionally display an invalid value in perfmon.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.30

    14.4.473.30

    14.4.473.29

    14.4.469.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.30

    14.4.473.30

    14.4.473.29

    14.4.469.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.30 14.4.473.30 14.4.473.29 14.4.469.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.30 14.4.473.30 14.4.473.29 14.4.469.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.30

    14.4.473.30

    14.4.473.29

    14.4.469.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.30

    14.4.473.30

    14.4.473.29

    14.4.469.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.30 14.4.473.30 14.4.473.29 14.4.469.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.30 14.4.473.30 14.4.473.29 14.4.469.0
    ]]>         このファームウェアパッケージには、以下のファームウェアバージョンが含まれています。

    アダプター

    速度

    Universal Boot Image

    ファームウェア

    UEFI

    ブートBIOS

    HPE SN1610E 32Gbシングルポートファイバーチャネルホストバスアダプター

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gbデュアルポートファイバーチャネルホストバスアダプター

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0
    HPE SN1700E 64Gbシングルポートファイバーチャネルホストバスアダプター 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    HPE SN1700E 64Gbデュアルポートファイバーチャネルホストバスアダプター 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Redfish BIOS settings might not be applied when upgrading the BIOS and changing BIOS settings simultaneously.

    Addressed an issue where the NVMe-oF target UUID could disappear after modifying the NVMe-oF Initiator name in RBSU.

    Addressed an issue where an incorrect Structured Boot Name appeared in the OS boot options.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Redfish BIOS settings might not be applied when upgrading the BIOS and changing BIOS settings simultaneously.

    Addressed an issue where the NVMe-oF target UUID could disappear after modifying the NVMe-oF Initiator name in RBSU.

    Addressed an issue where an incorrect Structured Boot Name appeared in the OS boot options.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Redfish BIOS settings might not be applied when upgrading the BIOS and changing BIOS settings simultaneously.

    Addressed an issue where the NVMe-oF target UUID could disappear after modifying the NVMe-oF Initiator name in RBSU.

    Addressed an issue where an incorrect Structured Boot Name appeared in the OS boot options.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Redfish BIOS settings might not be applied when upgrading the BIOS and changing BIOS settings simultaneously.

    Addressed an issue where the NVMe-oF target UUID could disappear after modifying the NVMe-oF Initiator name in RBSU.

    Addressed an issue where an incorrect Structured Boot Name appeared in the OS boot options.

    Known Issues:

    None]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • この製品は、nicclilomのインストール場所を正しいパスにアップデートするように強化されています。
  • この製品は、NETDEV_CHANGEイベントが発生したときにDCB設定を照会することで機能を強化します。
    • ]]>
  • This product enhances to update the installation location for nicclilom to the correct path.
  • This product enhances functionality by querying DCB settings when the NETDEV_CHANGE event occurs.
    • ]]>
  • この製品では、不正な帯域幅割り当てによるトラフィッククラス(TC)の枯渇を防ぐために、ETS検証の問題を修正しました。
  • この製品は、debugfs qp_infoがUDP送信元ポート値を正しく表示しない問題を修正します。
  • この製品は、シャットダウンまたはサスペンド中にデバイスがPTPから登録解除できない問題を修正します。
  • この製品は、IPv6 VXLANカプセル化解除が適切にサポートされていなかった問題を修正しました。
  • この製品は、順序外(OOS)パケットがドロップされる問題を修正します。
  • この製品は、フロー優先度レベル0 ～ 3が正しく処理されない問題を修正します。
  • この製品は、コアダンプサマリーを生成するときにコアダンプファイルデコーダーがクラッシュする問題を修正します。
    • ]]>
  • This product has fixed the ETS validation issue to prevent traffic class (TC) starvation caused by incorrect bandwidth allocation.
  • This product fixes the issue where debugfs qp_info displays the UDP source port value incorrectly.
  • This product fixes the issue where the device fails to unregister from PTP during shutdown or suspend.
  • This product fixes the issue where IPv6 VXLAN decapsulation was not properly supported.
  • This product fixes the issue where out-of-sequence (OOS) packets were being dropped.
  • This product fixes the issue where flow priority levels 0–3 were not handled correctly.
  • This product fixes the issue where the coredump file decoder crashes when generating a coredump summary.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn was disappear after reconfiguring NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn was disappear after reconfiguring NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Known Issues:

    None]]>         システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    システム構成 (RBSU) オプション"PCIeデバイス構成/アドバンストPCIe構成/PCIeホットプラグエラー制御"が追加され、デフォルトで"ホットプラグサプライズ"に設定されました。この設定には、次のRedfishプロパティがあります。

    /redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

    ]]>         Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    Added the System Configuration (RBSU) option "PCIe Device Configuration/Advanced PCIe Configuration/PCIe Hot-Plug Error Control" and set to "Hot-Plug Surprise" by default. This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

    ]]>         重要な注意：

    システムROMのこのリビジョンには、AMD第4世代EPYCプロセッサー用のAMDリファレンスコードGenoaPI 1.0.0.Fが含まれています。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    ファームウェアアップデートの実行中に、システムでRSODが発生してファームウェアのアップデートに失敗する可能性がある問題に対処しました。

    NVMe-oFターゲットにパーティションがない場合にシステムでRSODが発生する可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

    Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

    Known Issues:

    None]]>
  • このFWPKGからROMフラッシュウェイを削除します。
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • 修正方法 - IO実行中に優先度の低いコマンドが頻繁に挿入されると、ドライブがランダムにオフラインになる可能性があります。

    • 詳しくは、HPEカスタマーアドバイザリ: https://support.hpe.com/hpesc/public/docDisplay?docId=a00141941en_us を参照してください。

    ]]>
  • To fix - Frequent insertion of low priority commands during IO execution may lead to drive offline randomly.

    • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00141941en_us 

    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         重要：セキュリティ強化の機能改善 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能改善が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのバージョンにアップグレードすることを推奨します。

     

    バージョン16.35.4030には、以下の新機能と変更が含まれます。

    • 特定の宛先に向けられたトラフィックのQPタイムアウト「再試行超過」エラーを延期するためのサポートが追加されました。この新しい機能により、ライブマイグレーションによるダウンタイム中に宛先への接続が切断されることが防止されます。
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         以下の問題点がバージョン16.35.4030で修正されました。

    • VF FLRは、そのPFがFLRもトリガーするとスタックします。
    • ファームウェアがRoCEソースUDPポート制御の非PFドライバー構成 (SET_HCA_CAP.sw_r_roce_src_udp_portで設定) を無視したときに、RoCEパケットに予期しないソースUDPポートが表示されました。
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • 論理ドライブをインポートするときにシステムがクラッシュする可能性がある問題を修正しました。
    • ]]>
  • Fix an issue that system may crash when importing Logical Drive.
    • ]]>
  • 論理ドライブをインポートするときにシステムがクラッシュする可能性がある問題を修正しました。
    • ]]>
  • Fix an issue that system may crash when importing Logical Drive.
    • ]]>
  • This FW update contains the fix for false ILO message of temporary drive "degraded" status.
    • ]]>
  • This FW update contains the fix for false ILO message of temporary drive "degraded" status.
    • ]]>
  • HPK4のファームウェアメンテナンスリリース。
  • このバージョンのFWでは、データセンターNVMe SSD仕様に従って、UUIDがリトルエンディアンからビッグエンディアンに変更されていることに注意してください。 このUUIDの変更に応じて、システムアプリケーションを適宜アップデートする必要があります。 
  • ドライブFWをHPK4からHPK3にダウングレードする必要がある場合は、リセット/PORが必要です。
    • ]]>
  • Firmware maintenance release on HPK4.
  • Please note this version of FW has applied UUID change from little endian to big endian per Datacenter NVMe SSD Spec. System application should be updated accordingly per this UUID change. 
  • If drive FW needs to downgrade from HPK4 to HPK3, a reset/POR is required.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Azure Stack HCI 23H2のサポートを追加しました
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • 直接接続されたNVMeファームウェアのフラッシュの表示メッセージを修正し、OSによるFWアクティベーションの結果を揃えます。
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>         Support new Gen12 servers.

    ]]>         Support new Gen12 servers.

    ]]>         Gen10PおよびGen11サーバーの両方をサポートします

    ]]>         Support both Gen10P and Gen11 servers

    ]]>         For SEP2025 SPP

    ]]>         For SEP2025 SPP

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         バージョン20.43.2026には、変更も新機能も含まれていません。

    ]]>         No changes or new features have been included in version 20.43.2026.

    ]]>         以下の問題点がバージョン20.43.2026で修正されました：

    • サードパーティ製スイッチとのリンクアップの問題 (BCM53405)。
    • 競合状態を解決するためにCQ参照カウンターのアンダーフローを伴うファームウェアアサーション0x889fが発生する参照カウンターの問題。
    ]]>         The following issues have been fixed in version 20.43.2026:

    • A linkup issue vs a 3rd party switch (BCM53405).
    • A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.
    ]]>         バージョン9.4.11.20にアップデートしました

    ]]>         Updated to version 9.4.11.20

    ]]>         バージョン9.4.11.20にアップデートしました

    ]]>         Updated to version 9.4.11.20

    ]]>
  • This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.
    • ]]>
  • This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>

  • このコンポーネントは、VMD対応Intel VROCプラットフォームのサポートのみを提供します。

    • ]]>

  • This component provides support only for VMD enabled Intel VROC platform.

    • ]]>
  • 以前のファームウェアバージョンHPK5では、修正不可能なマシンチェック例外 (UMCE) が発生する可能性があります。ファームウェアバージョンを少なくともHPK6へアップデートすることが推奨されます。
  • 詳しくは、CAが次のURLで公開されています。https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>         For SEP2025 SPP

    ]]>         For SEP2025 SPP

    ]]>
  • RHEL10サポートを追加しました
    • ]]>
  • Added RHEL10 support
    • ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services (SPS) ファームウェア06.01.04.089.0 (2.50_04_01_2025) と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点：

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>
  • このFWPKGからROMフラッシュウェイを削除します。
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • このメンテナンスリビジョンにより、データの完全性が向上します。  このファームウェアにアップグレードしない場合のリスクは、特定のエラーやタイミング条件でデータが破損する可能性が高まることです。
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions..
    • ]]>
  • This is a maintenance release that contains code improvements for CAP.TO and LED behavior.
    • ]]>
  • This is a maintenance release that contains code improvements for CAP.TO and LED behavior.
    • ]]>          これは初期FWです。

    ]]>          This is an initial FW.

    ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • RHEL 10のサポートを追加しました。
    • ]]>
  • Added support for RHEL 10.
    • ]]>         ドライバーをバージョン10.02.14.00-k1にアップデートしました

    ]]>         Updated Driver version 10.02.14.00-k1

    ]]>         以下のサポートを追加しました。

    Red Hat Enterprise Linux 10

    ドライバーをバージョン10.02.14.00-k1にアップデートしました

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Updated Driver version 10.02.14.00-k1

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • ファームウェアバージョンHPDBを修正し、供給の継続性のために最新のNAND世代との互換性を追加します。
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • ESXi 9.0のサポートを追加しました
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         以下の修正がこのバージョンに含まれました：

    • Enabled-ClusterS2Dコマンドは、NonStopソリューションのD3610ディスクエンクロージャー内のSATAドライブ上で実行すると正常に完了するようになりました。

    • SASドライブのドライブケースであるスマートキャリアは、D3610/D3710ドライブエンクロージャーで認証されるようになりました。

    • ファンモジュールAおよびBの問題を報告するために、新しい7セグメントエラーコードE0およびE1がそれぞれ追加されました。これらの新しいコードはD3610/D3710にのみ適用され、ファームウェア5.04を実行しているときにのみ表示されます。

    • I/Oモジュール内のストレージエンクロージャープロセッサーに障害が発生すると、プロセッサーを確実にオンラインに戻すために、ハードリセット(電源を切ってから電源を入れる)が実行されます。

    このファームウェアに関する修正のリスト、拡張、既知の問題および回避方法については、リリースノートを参照してください。

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         TBD

    ]]>         This product fixes an issue where Large Send Offload (LSO) is not working.

    ]]>         This product fixes an issue where Large Send Offload (LSO) is not working.

    ]]>         Latest FW ver 4.22

    ]]>         Latest FW ver 4.22

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         バージョン20.43.2026には、変更も新機能も含まれていません。

    ]]>         No changes or new features have been included in version 20.43.2026.

    ]]>         以下の問題点がバージョン20.43.2026で修正されました：

    • サードパーティ製スイッチとのリンクアップの問題 (BCM53405)。
    • 競合状態を解決するためにCQ参照カウンターのアンダーフローを伴うファームウェアアサーション0x889fが発生する参照カウンターの問題。
    ]]>         The following issues have been fixed in version 20.43.2026:

    • A linkup issue vs a 3rd party switch (BCM53405).
    • A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.
    ]]>
  • Regular FW maintenance release for sanitize, DRAM,DMA transfer and log page fix.
    • ]]>
  • Regular FW maintenance release for sanitize, DRAM,DMA transfer and log page fix.
    • ]]>
  • FWリリースで15Tモデル番号のサポートとMCUコードの修正を追加します。
    • ]]>
  • Adding 15T model number support and MCU code fix in FW release.
    • ]]>
  • HPK1では、変更点および改善点として、Gen11 x2直接接続システムでドライブの内部PHYレジスタ値を変更することにより、受信信号を強化しています。
    • ]]>
  • Changes and improvements made in HPK1 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.
    • ]]>
  • HPK1では、変更点および改善点として、Gen11 x2直接接続システムでドライブの内部PHYレジスタ値を変更することにより、受信信号を強化しています。
    • ]]>
  • Changes and improvements made in HPK1 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         バージョン9.4.11.20にアップデートしました

    ]]>         Updated to version 9.4.11.20

    ]]>         バージョン9.4.10.20にアップデートしました

    ]]>         Updated to version 9.4.10.20

    ]]>
  • UNMAP コマンドを検証し、最新のファームウェアでブロック制限 VPD ページ データが正しいことを確認しました。
    • ]]>
  • Verified the UNMAP command and confirmed that the Block Limits VPD page data is correct with the latest firmware.
    • ]]>
  • リセットとイベント処理スレッド間の潜在的なミューテックスデッドロックを修正しました。この問題は、大量の IO、デバイスの追加/削除、SCSI 再スキャンが同時に実行されている場合に発生する可能性があります。
    • ]]>
  • Fix a potential mutex deadlock between reset and event handling thread. The issue may happen when there is heavy IO, device add/delete and SCSI rescan running in the same time.
    • ]]>
  • UNMAP コマンドを検証し、最新のファームウェアでブロック制限 VPD ページ データが正しいことを確認しました。
    • ]]>
  • Verified the UNMAP command and confirmed that the Block Limits VPD page data is correct with the latest firmware.
    • ]]>
  • リセットとイベント処理スレッド間の潜在的なミューテックスデッドロックを修正しました。この問題は、大量の IO、デバイスの追加/削除、SCSI 再スキャンが同時に実行されている場合に発生する可能性があります。
    • ]]>
  • Fix a potential mutex deadlock between reset and event handling thread. The issue may happen when there is heavy IO, device add/delete and SCSI rescan running in the same time.
    • ]]>         Fix 1) PCIe link length drop in AMD x2 system configuration
        2) Drive detection after hot re-insert on Windows
        3) Other regular FW patch release.

    ]]>         Fix 1) PCIe link length drop in AMD x2 system configuration
        2) Drive detection after hot re-insert on Windows
        3) Other regular FW patch release.

    ]]>
  • P81162-B21 NS204i-u 960GB NVMe SEDブートデバイスに自己暗号化ドライブを導入しました
  • 新しいGen12サーバーをサポートします。
    • ]]>
  • Introduced Self-Encrypting Drive on P81162-B21 NS204i-u 960GB NVMe SED Boot Device
  • Support new Gen 12 servers.
    • ]]>
  • DMA再マッピングが有効になっている場合に、NS204i-uファームウェア情報がUEFIに表示されない問題を修正しました。
  • 連続した再起動後に、DX360 Gen10 PlusでNS204i-rが断続的に検出されない問題を修正しました
    • ]]>
  • Fixed an issue that NS204i-u firmware information is not visible in UEFI when DMA remapping is enabled
  • Fixed an issue that NS204i-r is intermittently undetected on DX360 Gen10 Plus after continuous reboots
    • ]]>
  • P81162-B21 NS204i-u 960GB NVMe SEDブートデバイスに自己暗号化ドライブを導入しました
  • 新しいGen12サーバーをサポートします。
    • ]]>
  • Introduced Self-Encrypting Drive on P81162-B21 NS204i-u 960GB NVMe SED Boot Device
  • Support new Gen 12 servers.
    • ]]>
  • DMA再マッピングが有効になっている場合に、NS204i-uファームウェア情報がUEFIに表示されない問題を修正しました。
  • 連続した再起動後に、DX360 Gen10 PlusでNS204i-rが断続的に検出されない問題を修正しました
    • ]]>
  • Fixed an issue that NS204i-u firmware information is not visible in UEFI when DMA remapping is enabled
  • Fixed an issue that NS204i-r is intermittently undetected on DX360 Gen10 Plus after continuous reboots
    • ]]>         今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         今回のリリースで解決した問題については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         今回のリリースで解決した問題については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         ドライバーバージョン14.4.393.20にアップデートしました

    rawドライバーファイルは、Smartコンポーネントを解凍し、その後Emulexインストーラーを解凍することによって取得することができます。  次のコマンドを使用します。

        elxdrvr-fc-version.exe /q2 extract=2

    解凍されたファイルは次に置かれます。

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。  例、

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019
     

    ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019
     

    ]]>         ドライバーバージョン14.4.393.20にアップデートしました

    rawドライバーファイルは、Smartコンポーネントを解凍し、その後Emulexインストーラーを解凍することによって取得することができます。  次のコマンドを使用します。

        elxdrvr-fc-version.exe /q2 extract=2

    解凍されたファイルは次に置かれます。

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。  例、

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019
     

    ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019
     

    ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、NICのHIIメニューで送信バランス機能が有効になっている場合にiceドライバーのロードに失敗していた問題を修正します。

    ]]>         This product fixes an issue where the ice driver failed to load when the transmit balancing feature was enabled in the NIC HII menu.

    ]]>
  • This is a maintenance release that contains code fix improvements and drive function enhancements.
    • ]]>
  • This is a maintenance release that contains code fix improvements and drive function enhancements.
    • ]]>
  • Regular FW maintenance for fixing MCU,sanitize, DRAM and log page..etc.
    • ]]>
  • Regular FW maintenance for fixing MCU,sanitize, DRAM and log page..etc.
    • ]]>
  • PCIeリンクドロップ、Windowsでのホット再挿入後のドライブ検出を修正し、その他の定期的なFWパッチリリースが含まれています。
    • ]]>
  • Fixes PCIe link drop, Drive detection after hot re-insert on Windows and includes other regular FW patch releases.
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • この製品では、TMFIFO インターフェイスを介した大容量ファイルの転送が失敗する問題が修正されました。
  • この製品では、小さすぎるバッファーサイズを使用することで発生する問題を修正 しました。
  • この製品では、サポートされている速度が現在の速度として表示されるか、その逆となる、イベントID 401の問題を修正しました。
  • この製品は、カウンターセット「Mellanox WinOF-2 VF Port Traffic」内の特定のカウンターが、perfmonでまれに無効な値を表示する問題を修正しました。
    • ]]>
  • This product fixed an issue that caused large file transfers over the TMFIFO interface to fail.
  • This product fixed an issue that caused by using a buffer size that was too small.
  • This product fixed an issue in event ID 401, where the supported speed was displayed as the current speed and vice versa.
  • This product fixed an issue where certain counters in the counter set "Mellanox WinOF-2 VF Port Traffic" would occasionally display an invalid value in perfmon.
    • ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>
  • サポート環境をアップデートしました
    • ]]>
  • Updated Supported Environments
    • ]]>         Important Notes:

    Ver. 1.0.4(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.4. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.0.4.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.  
    Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.4(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.4. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.0.4.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.  
    Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

    Known Issues:

    None

    ]]>         重要な注意：

    Ver 1.0.4(B)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver 1.0.4と同等です。ファームウェアをバージョン1.0.4にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョン(B)にアップグレードする必要はありません。

    ファームウェアの依存関係：

    なし

    機能強化/新しい機能：

    Gen11 AMDプラットフォームの新しいレイアウトデザインに基づいてADC変換式を変更しました。 
    AMDプラットフォーム上の高速プラットフォームトリガーメカニズムの精度が向上しました。

    既知の問題点：

    なし

    ]]>         Important Notes:

    Ver. 1.0.4(B) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.4. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 1.0.4.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.  
    Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

    Known Issues:

    None

    ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • DMTF PLDM Redfish デバイス有効化の機能強化
    • Redfishボリューム変換サポート
      • POST #Volume.ChangeRAIDLayout: RAIDレイアウトの変更。RAIDレイアウトの変更は、入力JSONボディにターゲットRAIDTypeとドライブのリストを提供することで実現されます。
      • POST #Volume.ChangeRAIDLayout: サイズ変更。ChangeRAIDLayoutを使用すると、RAIDTypeを変更せずに新しい未構成正常ドライブを追加することでボリュームのサイズを変更できます。このような場合、入力JSONボディでRAIDTypeを指定してはいけませんが、それに応じて完全なドライブリストを指定する必要があります。
      • PATCH Volume[CapacityBytes]: この操作は、ボリューム内に利用可能な未使用サイズがある場合にボリュームのサイズを変更するために使用されます。ここに新しいドライブを追加するスコープはありません
      • POST #Volume.CheckConsistency: この操作は、ボリューム上の整合性チェック操作を開始します。この操作では入力は想定されません。
    • Redfish Metrics GETサポート
      • StorageControllerMetrics: UncorrectableECCErrorCount、CorrectableECCErrorCount、CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount、SAS.LossOfDwordSynchronizationCount、SAS.RunningDisparityErrorCount、PCIeErrors.CorrectableErrorCount、PCIeErrors.FatalErrorCount、PCIeErrors.NonFatalErrorCount
      • 各カウンターは最大65535までの値を保持できます。カウンターが最大値に達しても、値はリセットされません。
      • ユーザーがコントローラーのNVRAMクリアまたはRedfish ResetToDefaults.ResetAllを実行すると、メトリックはクリアされます。
  • MRSAおよびstorcli工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加。
    • コントローラー上に構成が存在する場合、または固定キャッシュが存在する場合、NVRAMクリア操作は許可されません。
    • NVRAMをクリアした後、コントローラーFWはオンラインコントローラーリセット (OCR) を実行します。何らかの理由でOCRを実行できない場合は、システムを再起動するようにユーザーに通知されます。
    • NVRAMクリア操作は、機能的にはRedfish ResetToDefaults.ResetAll操作と同等です。
  • バックプレーンベイ数情報を、コントローラーに接続されている実際のベイに変更。非ホットプラグ構成の場合、コントローラーは常に16個のベイを表示します。
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • a00143124en_usアドバイザリを修正: HPE MR Gen11 コントローラー - HPE Gen11サーバー上のMR Gen11コントローラーがIMLで"WriteCacheDataLoss"を生成できない場合がある
  • a00148035en_usアドバイザリを修正: HPE MR Gen11コントローラー - ベイとボックスのNVMeドライブの場所がワンタイムブートメニューに表示されない
  • Linux OSでLTOの128KBを超える読み取り/書き込み転送が失敗する問題を修正
  • Backup ExecがLTOで動作しない問題を修正
  • 240個の論理ドライブが構成されている場合、サーバーのブート時にコントローラーがiLOによってドロップされる可能性がある問題を修正
  • ドライブを連続的に削除すると、サーバーヘルスが一時的にクリティカルを示すというまれな問題を修正
  • 予期しないPCIConfiglinkページイベント、仮想SESデバイスへのタスク管理のタイムアウトメッセージがsnapdumpに記録される問題を修正
  • 空のベイにスロット対応プロトコルがない問題を修正
  • コントローラーに接続されたLTOのリンク速度が[不明]と表示される問題を修正
  • Request Senseコマンドにより、サニタイズが進行中のドライブでタスク管理が実行される問題を修正。
  • 255を超える値が使用された場合に、Redfish PATCH StorageController[ControllerRates]がランダムな値を暗黙的に設定してしまう問題を修正。
  • コントローラーがパススルーとして構成されているときにVMを再起動すると、誤ったコントローラーエラーイベントが記録される可能性がある問題を修正
  • 2つのバックプレーンが同じストレージポートに接続されている場合、Redfishファブリックポートのアクティブ幅と現在の速度が間違っているという問題を修正。
  • 再起動後にNVMeドライブのリンクステータスが失敗する可能性があるというまれな問題を修正 
  • 複数のドライブの取り外しと挿入が短時間に行われたときにコントローラーがアサートされる可能性があるというまれな問題を修正
  • SATAパススルーコマンドが実行中の場合、SATAドライブのサニタイズのパーセンテージが進行しない問題を修正
  • NVMeドライブでサニタイズのパーセンテージが進行しない問題を修正
  • 読み取り/書き込みコマンドと非読み取り/書き込みコマンドの耐久テストでIOタイムアウトとデバイスリセットが発生することがあるというまれな問題を修正
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • ファームウェアバージョンHPDBを修正し、供給の継続性のために最新のNAND世代との互換性を追加します。
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>         TBD

    ]]>         TBD

    ]]>         新しいプラットフォームのサポートを追加します。

    ]]>         Add new support platform.

    ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         バージョン28.44.1036には、以下の新機能と変更が含まれます。

    • NIC輻輳時にPause/PFCフレームの送信を遅延させるために、RXロスレスバッファーサイズを増やしました。
    • 1Gリンク速度でのSyncEのサポートが追加されました。
    • 並列処理を強化するために、割り当てフローと割り当て解除フローの新しいメカニズムを追加しました。
    • マルチホスト展開を使用する場合、各ホストには固有のポートとPFが割り当てられ、独自のLAGを管理します。
    • PCIeスイッチ構成のセットアップでfwresetを実行するためのツールとドライバーを含む新しい同期フローのサポートが追加されました。
    • 同じPF上の異なるVF間で統合PTPがサポートされるようになりました。
    • 新しいMADのサポートが追加されました: PortRecoveryPolicyConfigおよび PortRecoveryPolicyCounters 。PHY回復プロセス中、ファームウェアコアはport_logical_stateをActiveとして示します。
    • 新しいNV構成 (SM_DISABLE、デフォルト0) が追加されました。これを有効にすると、SMから発信されていないSMPトラフィックがブロックされます。
    • PFCCアクセスレジスターのパラメーターとしてケーブル長を設定する機能を追加しました。ケーブルの長さは、サイズ、Xoff、Xon しきい値などの RXロスレスバッファーパラメーターの計算に使用されます。
    ]]>         New features and changes included in version 28.44.1036:

    • Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
    • Added support for SyncE at 1G link speed.
    • Added a new mechanism for allocations and deallocations flows to enhance parallelism.
    • When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
    • Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
    • Unified PTP is now supported across different VFs on the same PF.
    • Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the  port_logical_state as Active.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         以下の問題点がバージョン28.44.1036で修正されました。

    • ケーブル情報セマフォのデッドロック。
    • TLV完全リストのエラー処理が不適切だったため、TLVメカニズムがハングしました。
    • SPDM GET_CERTIFICATE操作は、すべての証明書チェーンのオフセットとチャンクサイズをサポートしていませんでした。
    • VDPAにおける問題で、virtqがmkeyなしで作成された場合、またはライブマイグレーション中に人を介さずマッピングされたmkeyで作成された場合、virtqを破棄するとext_synd=0x8f33でヘルスバッファー症候群が発生します。
    • VDPA機能ビットGUEST_TSO4およびGUEST_TSO6が予期せずデフォルトで設定され、トラフィックの中断が発生しました。
    • PCC NPを有効にし、リンクタイプを1つのポートにIB、もう1つのポートにEthernetを設定すると、dmesgにext_synd 0x8309のアサートが表示される可能性があります。
    ]]>         The following issues have been fixed in version 28.44.1036:

    • Cable info semaphore deadlock.
    • Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
    • The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
    • An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
    • The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
    • Enabling PCC NP and setting the link type to one port as IB and the other as Ethernet could cause an assert to appear in dmesg with ext_synd 0x8309.
    ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>
  • This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.
    • ]]>
  • This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.
    • ]]>         この製品は、ファームウェアをアップデートした後に、BCM5719 4ポートアダプターのポート3および4でMBA構成がデフォルトにリセットされる問題を修正します。

    ]]>         This product fixes an issue where MBA configuration reset to defaults on port 3 and 4 for BCM5719 4-port adapters after updating firmware.

    ]]>         この製品は、ファームウェアのアップデート後にMBA構成がデフォルトにリセットされる問題を修正します。

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • DMTF PLDM Redfish デバイス有効化の機能強化
    • Redfishボリューム変換サポート
      • POST #Volume.ChangeRAIDLayout: RAIDレイアウトの変更。RAIDレイアウトの変更は、入力JSONボディにターゲットRAIDTypeとドライブのリストを提供することで実現されます。
      • POST #Volume.ChangeRAIDLayout: サイズ変更。ChangeRAIDLayoutを使用すると、RAIDTypeを変更せずに新しい未構成正常ドライブを追加することでボリュームのサイズを変更できます。このような場合、入力JSONボディでRAIDTypeを指定してはいけませんが、それに応じて完全なドライブリストを指定する必要があります。
      • PATCH Volume[CapacityBytes]: この操作は、ボリューム内に利用可能な未使用サイズがある場合にボリュームのサイズを変更するために使用されます。ここに新しいドライブを追加するスコープはありません
      • POST #Volume.CheckConsistency: この操作は、ボリューム上の整合性チェック操作を開始します。この操作では入力は想定されません。
    • Redfish Metrics GETサポート
      • StorageControllerMetrics: UncorrectableECCErrorCount、CorrectableECCErrorCount、CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount、SAS.LossOfDwordSynchronizationCount、SAS.RunningDisparityErrorCount、PCIeErrors.CorrectableErrorCount、PCIeErrors.FatalErrorCount、PCIeErrors.NonFatalErrorCount
      • 各カウンターは最大65535までの値を保持できます。カウンターが最大値に達しても、値はリセットされません。
      • ユーザーがコントローラーのNVRAMクリアまたはRedfish ResetToDefaults.ResetAllを実行すると、メトリックはクリアされます。
  • MRSAおよびstorcli工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加。
    • コントローラー上に構成が存在する場合、または固定キャッシュが存在する場合、NVRAMクリア操作は許可されません。
    • NVRAMをクリアした後、コントローラーFWはオンラインコントローラーリセット (OCR) を実行します。何らかの理由でOCRを実行できない場合は、システムを再起動するようにユーザーに通知されます。
    • NVRAMクリア操作は、機能的にはRedfish ResetToDefaults.ResetAll操作と同等です。
  • バックプレーンベイ数情報を、コントローラーに接続されている実際のベイに変更。非ホットプラグ構成の場合、コントローラーは常に16個のベイを表示します。
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • a00143124en_usアドバイザリを修正: HPE MR Gen11 コントローラー - HPE Gen11サーバー上のMR Gen11コントローラーがIMLで"WriteCacheDataLoss"を生成できない場合がある
  • a00148035en_usアドバイザリを修正: HPE MR Gen11コントローラー - ベイとボックスのNVMeドライブの場所がワンタイムブートメニューに表示されない
  • Linux OSでLTOの128KBを超える読み取り/書き込み転送が失敗する問題を修正
  • Backup ExecがLTOで動作しない問題を修正
  • 240個の論理ドライブが構成されている場合、サーバーのブート時にコントローラーがiLOによってドロップされる可能性がある問題を修正
  • ドライブを連続的に削除すると、サーバーヘルスが一時的にクリティカルを示すというまれな問題を修正
  • 予期しないPCIConfiglinkページイベント、仮想SESデバイスへのタスク管理のタイムアウトメッセージがsnapdumpに記録される問題を修正
  • 空のベイにスロット対応プロトコルがない問題を修正
  • コントローラーに接続されたLTOのリンク速度が[不明]と表示される問題を修正
  • Request Senseコマンドにより、サニタイズが進行中のドライブでタスク管理が実行される問題を修正。
  • 255を超える値が使用された場合に、Redfish PATCH StorageController[ControllerRates]がランダムな値を暗黙的に設定してしまう問題を修正。
  • コントローラーがパススルーとして構成されているときにVMを再起動すると、誤ったコントローラーエラーイベントが記録される可能性がある問題を修正
  • 2つのバックプレーンが同じストレージポートに接続されている場合、Redfishファブリックポートのアクティブ幅と現在の速度が間違っているという問題を修正。
  • 再起動後にNVMeドライブのリンクステータスが失敗する可能性があるというまれな問題を修正 
  • 複数のドライブの取り外しと挿入が短時間に行われたときにコントローラーがアサートされる可能性があるというまれな問題を修正
  • SATAパススルーコマンドが実行中の場合、SATAドライブのサニタイズのパーセンテージが進行しない問題を修正
  • NVMeドライブでサニタイズのパーセンテージが進行しない問題を修正
  • 読み取り/書き込みコマンドと非読み取り/書き込みコマンドの耐久テストでIOタイムアウトとデバイスリセットが発生することがあるというまれな問題を修正
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services (SPS) ファームウェア06.01.04.089.0 (2.50_04_01_2025) と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点：

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         SimpliVityプライベートリリースの場合のみ。

    ]]>         For SimpliVity private release only.

    ]]>
  • Added Support for ESXi 9.0
    • ]]>
  • Added Support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         For SEP2025 SPP

    ]]>         For SEP2025 SPP

    ]]>
  • Smartコンポーネントのハングの問題を修正します。
    • ]]>
  • Fix smart component hang issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • DMTF PLDM Redfish デバイス有効化の機能強化
    • Redfishボリューム変換サポート
      • POST #Volume.ChangeRAIDLayout: RAIDレイアウトの変更。RAIDレイアウトの変更は、入力JSONボディにターゲットRAIDTypeとドライブのリストを提供することで実現されます。
      • POST #Volume.ChangeRAIDLayout: サイズ変更。ChangeRAIDLayoutを使用すると、RAIDTypeを変更せずに新しい未構成正常ドライブを追加することでボリュームのサイズを変更できます。このような場合、入力JSONボディでRAIDTypeを指定してはいけませんが、それに応じて完全なドライブリストを指定する必要があります。
      • PATCH Volume[CapacityBytes]: この操作は、ボリューム内に利用可能な未使用サイズがある場合にボリュームのサイズを変更するために使用されます。ここに新しいドライブを追加するスコープはありません
      • POST #Volume.CheckConsistency: この操作は、ボリューム上の整合性チェック操作を開始します。この操作では入力は想定されません。
    • Redfish Metrics GETサポート
      • StorageControllerMetrics: UncorrectableECCErrorCount、CorrectableECCErrorCount、CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount、SAS.LossOfDwordSynchronizationCount、SAS.RunningDisparityErrorCount、PCIeErrors.CorrectableErrorCount、PCIeErrors.FatalErrorCount、PCIeErrors.NonFatalErrorCount
      • 各カウンターは最大65535までの値を保持できます。カウンターが最大値に達しても、値はリセットされません。
      • ユーザーがコントローラーのNVRAMクリアまたはRedfish ResetToDefaults.ResetAllを実行すると、メトリックはクリアされます。
  • MRSAおよびstorcli工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加。
    • コントローラー上に構成が存在する場合、または固定キャッシュが存在する場合、NVRAMクリア操作は許可されません。
    • NVRAMをクリアした後、コントローラーFWはオンラインコントローラーリセット (OCR) を実行します。何らかの理由でOCRを実行できない場合は、システムを再起動するようにユーザーに通知されます。
    • NVRAMクリア操作は、機能的にはRedfish ResetToDefaults.ResetAll操作と同等です。
  • バックプレーンベイ数情報を、コントローラーに接続されている実際のベイに変更。非ホットプラグ構成の場合、コントローラーは常に16個のベイを表示します。
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • a00143124en_usアドバイザリを修正: HPE MR Gen11 コントローラー - HPE Gen11サーバー上のMR Gen11コントローラーがIMLで"WriteCacheDataLoss"を生成できない場合がある
  • a00148035en_usアドバイザリを修正: HPE MR Gen11コントローラー - ベイとボックスのNVMeドライブの場所がワンタイムブートメニューに表示されない
  • Linux OSでLTOの128KBを超える読み取り/書き込み転送が失敗する問題を修正
  • Backup ExecがLTOで動作しない問題を修正
  • 240個の論理ドライブが構成されている場合、サーバーのブート時にコントローラーがiLOによってドロップされる可能性がある問題を修正
  • ドライブを連続的に削除すると、サーバーヘルスが一時的にクリティカルを示すというまれな問題を修正
  • 予期しないPCIConfiglinkページイベント、仮想SESデバイスへのタスク管理のタイムアウトメッセージがsnapdumpに記録される問題を修正
  • 空のベイにスロット対応プロトコルがない問題を修正
  • コントローラーに接続されたLTOのリンク速度が[不明]と表示される問題を修正
  • Request Senseコマンドにより、サニタイズが進行中のドライブでタスク管理が実行される問題を修正。
  • 255を超える値が使用された場合に、Redfish PATCH StorageController[ControllerRates]がランダムな値を暗黙的に設定してしまう問題を修正。
  • コントローラーがパススルーとして構成されているときにVMを再起動すると、誤ったコントローラーエラーイベントが記録される可能性がある問題を修正
  • 2つのバックプレーンが同じストレージポートに接続されている場合、Redfishファブリックポートのアクティブ幅と現在の速度が間違っているという問題を修正。
  • 再起動後にNVMeドライブのリンクステータスが失敗する可能性があるというまれな問題を修正 
  • 複数のドライブの取り外しと挿入が短時間に行われたときにコントローラーがアサートされる可能性があるというまれな問題を修正
  • SATAパススルーコマンドが実行中の場合、SATAドライブのサニタイズのパーセンテージが進行しない問題を修正
  • NVMeドライブでサニタイズのパーセンテージが進行しない問題を修正
  • 読み取り/書き込みコマンドと非読み取り/書き込みコマンドの耐久テストでIOタイムアウトとデバイスリセットが発生することがあるというまれな問題を修正
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         重要：セキュリティ強化の機能改善 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能改善が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのバージョンにアップグレードすることを推奨します。

     

    バージョン16.35.4030には、以下の新機能と変更が含まれます。

    • 特定の宛先に向けられたトラフィックのQPタイムアウト「再試行超過」エラーを延期するためのサポートが追加されました。この新しい機能により、ライブマイグレーションによるダウンタイム中に宛先への接続が切断されることが防止されます。
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         以下の問題点がバージョン16.35.4030で修正されました。

    • VF FLRは、そのPFがFLRもトリガーするとスタックします。
    • ファームウェアがRoCEソースUDPポート制御の非PFドライバー構成 (SET_HCA_CAP.sw_r_roce_src_udp_portで設定) を無視したときに、RoCEパケットに予期しないソースUDPポートが表示されました。
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • 論理ドライブをインポートするときにシステムがクラッシュする可能性がある問題を修正しました。
    • ]]>
  • Fix an issue that system may crash when importing Logical Drive.
    • ]]>
  • 論理ドライブをインポートするときにシステムがクラッシュする可能性がある問題を修正しました。
    • ]]>
  • Fix an issue that system may crash when importing Logical Drive.
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • この製品は、NXEファミリデバイスの一貫したPTPクロックのレポートを強化します。
  • この製品は、必要なPNP IDを追加することでデバイスの互換性を強化します。
    • ]]>
  • This product enhances the reporting of a consistent PTP clock for NXE family devices.
  • This product enhances device compatibility by adding the necessary PNP ID.
    • ]]>         この製品は、未使用のrelease.txtファイルが削除されない問題を修正します。

    ]]>         This product fixes the issue where an unused release.txt file was not removed.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixes a false indication of rare capacitor test failure
    • ]]>
  • Fixes a false indication of rare capacitor test failure
    • ]]>
  • このFWPKGからROMフラッシュウェイを削除します。
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • このメンテナンスリビジョンにより、データの完全性が向上します。  このファームウェアにアップグレードしない場合のリスクは、特定のエラーやタイミング条件でデータが破損する可能性が高まることです。

    •  

    ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

    •  

    ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • This is a maintenance release that contains code fix improvements and drive function enhancements. Upgrading from HPK1 to HPK2 requires power cycle.
    • ]]>
  • This is a maintenance release that contains code fix improvements and drive function enhancements. Upgrading from HPK1 to HPK2 requires power cycle.
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>         This product fixes an issue where Large Send Offload (LSO) is not working.

    ]]>         This product fixes an issue where Large Send Offload (LSO) is not working.

    ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>
  • エラー処理の許容度を向上します。
  • PSODを防ぐためのDMAエンジン属性の強化。
    • ]]>
  • Improve the tolerance of error handling.
  • Enhancement of DMA engine attributes to prevent PSOD.
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • This is a planned maintenance release covering bug fixes. This firmware includes updates to improve PLI circuit reliability.
    • ]]>
  • This is a planned maintenance release covering bug fixes. This firmware includes updates to improve PLI circuit reliability.
    • ]]>
  • HPG3 is a planned maintenance release covering bug fixes for 2.5” and M.2. There are no critical functional updates, and risk is low for customers who do not upgrade, especially if drives are not stored without power for a long period of time (~2 years).
    • ]]>
  • HPG3 is a planned maintenance release covering bug fixes for 2.5” and M.2. There are no critical functional updates, and risk is low for customers who do not upgrade, especially if drives are not stored without power for a long period of time (~2 years).
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         今回のリリースで解決した問題については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         今回のリリースで解決した問題については、AMSリリースノートを参照してください。

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • FW assert fix and other regular maintenance release.
    • ]]>
  • FW assert fix and other regular maintenance release.
    • ]]>         For SEP2025 SPP

    ]]>         For SEP2025 SPP

    ]]>
  • Smartコンポーネントのハングの問題を修正します。
    • ]]>
  • Fix smart component hang issue.
    • ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、Columbiaville 4.5のファームウェアとの互換性を強化しました。

    ]]>         This product enhanced the compatibility with firmware of Columbiaville 4.5.

    ]]>         この製品は、E810物理アダプターがRDMAカウンターを表示しない問題を修正します。

    ]]>         This product correct an issue which E810 physical adapter does not display RDMA counters.

    ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点：

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>
  • Fix a00145710en_us: HPE MR Gen11 and Gen10 Plus Storage Controllers - Purple Screen of Death (PSOD) May Be Observed When Updating Controller Firmware Via Service Pack for ProLiant (SPP) in Remote Deployment Mode With a VMware ESXi OS
    • ]]>
  • Fix a00145710en_us: HPE MR Gen11 and Gen10 Plus Storage Controllers - Purple Screen of Death (PSOD) May Be Observed When Updating Controller Firmware Via Service Pack for ProLiant (SPP) in Remote Deployment Mode With a VMware ESXi OS
    • ]]>
  • Fix a00145710en_us: HPE MR Gen11およびGen10 Plusストレージコントローラー - VMware ESXi OSを使用してリモート展開モードでService Pack for ProLiant (SPP) によりコントローラーのファームウェアをアップデートすると、パープルスクリーン (PSOD) が発生する場合があります
    • ]]>
  • Fix a00145710en_us: HPE MR Gen11 and Gen10 Plus Storage Controllers - Purple Screen of Death (PSOD) May Be Observed When Updating Controller Firmware Via Service Pack for ProLiant (SPP) in Remote Deployment Mode With a VMware ESXi OS
    • ]]>
  • このFWPKGからROMフラッシュウェイを削除します。
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • この修正は、ホストが読み取りコマンドを発行したときに、ウェアレベリングプロセスの対象ブロックで回復不能なエラーが発生する可能性がある場合に行われます。
    • ]]>
  • This fix is for unrecovered errors may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>         For Sep SPP 2025

    ]]>         For Sep SPP 2025

    ]]>
  • 最初のリリースです。
    • ]]>
  • Initial Release.
    • ]]>         TBD

    ]]>         TBD

    ]]>         最初のリリース

    ]]>         Initial release.

    ]]>
  • Added Support for ESXi 9.0
    • ]]>
  • Added Support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         iLOセキュリティモードがCNSAに設定されている場合にシャーシコントローラファームウェアをアップデートできます。

    ]]>         Allowed to update chassis controller firmware when iLO security mode is set to CNSA

    ]]>
  • Allowed to update chassis controller firmware when iLO security mode is set to CNSA
  • Signed with SHA384
    • ]]>
  • Allowed to update chassis controller firmware when iLO security mode is set to CNSA
  • Signed with SHA384
    • ]]>         - HPE Compute Edge Server e930tのサポートを追加  

    ]]>         -   Added support for HPE Compute Edge Server e930t  

    ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、最新のドライバーとの互換性を強化しました。

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>
  • The FW address: PCIe link drop and 0ther regular FW patches release.
    • ]]>
  • The FW address: PCIe link drop and 0ther regular FW patches release.
    • ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>
  • Signed with SHA384
    • ]]>
  • Signed with SHA384
    • ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         ファームウェアHPK4で行われた変更と改善により、以前のファームウェアよりもPCIe VDM上のMCTPが無効になります。

    ]]>         Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

    ]]>         ファームウェアHPK4で行われた変更と改善により、以前のファームウェアよりも PCIe VDM上のMCTPが無効になります。

    ]]>         Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

    ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、カーネルのコンパイルの問題を修正します。

    ]]>         This product fixes the kernel compilation issue.

    ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、カーネルのコンパイルの問題を修正します。

    ]]>         This product fixes the kernel compilation issue.

    ]]>         Enhanced ROM error logging when DIMM serial number is identified as "00000000".

    ]]>         Enhanced ROM error logging when DIMM serial number is identified as "00000000".

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Catlow Refresh MR2 BKC. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where incorrect Structure Boot Name showed in the OS boot option.

    Addressed an issue where system may hang while switching RBSU pages in multi-language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Catlow Refresh MR2 BKC. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where incorrect Structure Boot Name showed in the OS boot option.

    Addressed an issue where system may hang while switching RBSU pages in multi-language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         複数言語の翻訳をアップデートしました。

    "スムーズな冷却"RBSUオプションのヘルプテキストを追加しました。

    ]]>         Updated multi-language translation.

    Added the help text for "Smooth Cooling" RBSU option.

    ]]>         重要な注記：

    このバージョンのシステムROMには、Intel Catlow Refresh MR1 BKCに合わせたアップデートが含まれています。 このバージョンのシステムROMは、Server Platform Services (SPS) ファームウェア06.03.04.058.0 (2.20_03_03_2025) と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題：

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Catlow Refresh MR1 BKC. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Known Issues:

    None]]>         バージョン14.4.473.24にアップデートしました

    ]]>         Updated to version 14.4.473.24

    ]]>         以下のサポートを追加しました。

    Red Hat Enterprise Linux 10.0

    バージョン14.4.473.24にアップデートしました

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>
  • Updated Supported Environments
    • ]]>
  • Updated Supported Environments
    • ]]>
  • サポート環境をアップデートしました
  • サポートされる製品をアップデートしました
    • ]]>
  • Updated Supported Environments
  • Updated Supported Products
    • ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>
  • Added support for Azure Stack HCI 23H2..
    • ]]>
  • Added support for Azure Stack HCI 23H2..
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         to be added

    ]]>         to be added

    ]]>         to be added

    ]]>         to be added

    ]]>         なし

    ]]>         None

    ]]>         OpenSSL 3.Xを搭載したLinuxオペレーティングシステムでhponcfgが失敗する問題を修正しました。

    ]]>         Fixed an issue where hponcfg was failing on Linux operating system with OpenSSL 3.X

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Updated Driver version 10.02.14.00-k1

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Updated Driver version 10.02.14.00-k1

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         DIMMのシリアル番号が"00000000"と識別された場合、IMLが記録されます。

    ]]>         An IML will be logged if the DIMM serial number is identified as "00000000"

    ]]>         重要な注意：

    システムROMのこのリビジョンには、AMD第5世代EPYCプロセッサー用のAMDリファレンスコードTurinPI 1.0.0.6が含まれています。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    Microsoft Secured-coreサポートが有効になっている場合にシステムがハングする可能性がある問題に対処しました。

    日本語でページを切り替えているときにRBSUでシステムがハングする可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This revision of the System ROM includes AMD reference code TurinPI 1.0.0.6 for AMD 5th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may hang when Microsoft secure-core support is enabled.

    Addressed an issue where system may hang at RBSU while switch pages in Japanese language.

    Known Issues:

    None]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         New features and changes included in version 28.45.1200:

    • Introduced a 1ms delay for SPDM responses.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         The following fixes have been included in version 28.45.1200:

    • Fixed DC InfiniBand functionality.
    ]]>         バージョン28.44.1036には、以下の新機能と変更が含まれます。

    • NIC輻輳時にPause/PFCフレームの送信を遅延させるために、RXロスレスバッファーサイズを増やしました。
    • 並列処理を強化するために、割り当てフローと割り当て解除フローの新しいメカニズムを追加しました。
    • マルチホスト展開を使用する場合、各ホストには固有のポートとPFが割り当てられ、独自のLAGを管理します。
    • PCIeスイッチ構成のセットアップでfwresetを実行するためのツールとドライバーを含む新しい同期フローのサポートが追加されました。
    • 同じPF上の異なるVF間で統合PTPがサポートされるようになりました。
    • 新しいMADのサポートが追加されました: PortRecoveryPolicyConfigおよび PortRecoveryPolicyCounters 。PHY 回復プロセス中、ファームウェアコアはport_logical_stateをActiveとして示します。
    • 新しいNV構成 (SM_DISABLE、デフォルト0) が追加されました。これを有効にすると、SMから発信されていないSMPトラフィックがブロックされます。
    • PFCCアクセスレジスターのパラメーターとしてケーブル長を設定する機能を追加しました。ケーブルの長さは、サイズ、Xoff、Xon しきい値などの RXロスレスバッファーパラメーターの計算に使用されます。
    ]]>         New features and changes included in version 28.44.1036:

    • Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
    • Added a new mechanism for allocations and deallocations flows to enhance parallelism.
    • When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
    • Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
    • Unified PTP is now supported across different VFs on the same PF.
    • Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the  port_logical_state as Active.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         以下の問題点がバージョン28.44.1036で修正されました。

    • ケーブル情報セマフォのデッドロック。
    • TLV完全リストのエラー処理が不適切だったため、TLVメカニズムがハングしました。
    • SPDM GET_CERTIFICATE操作は、すべての証明書チェーンのオフセットとチャンクサイズをサポートしていませんでした。
    • VDPAにおける問題で、virtqがmkeyなしで作成された場合、またはライブマイグレーション中に人を介さずマッピングされたmkeyで作成された場合、virtqを破棄するとext_synd=0x8f33でヘルスバッファー症候群が発生します。
    • VDPA機能ビットGUEST_TSO4およびGUEST_TSO6が予期せずデフォルトで設定され、トラフィックの中断が発生しました。
    ]]>         The following issues have been fixed in version 28.44.1036:

    • Cable info semaphore deadlock.
    • Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
    • The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
    • An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
    • The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
    ]]>
  • このFWPKGからROMフラッシュウェイを削除します。
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • ランダム読み取り/書き込みパフォーマンスを向上します。
    • ]]>
  • Improve random read/write perfomance.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Azure Stack HCI 23H2のサポートを追加しました
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>         Important Notes:

    Ver. 1.0.4(F) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.4. It is not necessary to upgrade with Revision D if a previous component revision was used to upgrade the firmware to version 1.0.4.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.  
    Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.4(F) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.4. It is not necessary to upgrade with Revision D if a previous component revision was used to upgrade the firmware to version 1.0.4.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.  
    Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

    Known Issues:

    None

    ]]>         重要な注意：

    Ver 1.0.4(C)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver 1.0.4と同等です。ファームウェアをバージョン1.0.4にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョンCにアップグレードする必要はありません。

    ファームウェアの依存関係：

    なし

    機能強化/新しい機能：

    Gen11 AMDプラットフォームの新しいレイアウトデザインに基づいてADC変換式を変更しました。 
    AMDプラットフォーム上の高速プラットフォームトリガーメカニズムの精度が向上しました。

    既知の問題点：

    なし

    ]]>         Important Notes:

    Ver. 1.0.4(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.4. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.0.4.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.  
    Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

    Known Issues:

    None

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Support SY480 Gen12 server.

    ]]>         Support SY480 Gen12 server.

    ]]>         CMD 40 SESの内容を改良します。

    ]]>         Refine CMD 40 SES content.

    ]]>         i2cの問題を修正

    • DFC idxがアップデートされていない
    • 予期しないチェックサムエラー
    ]]>         Fix i2c issues

    • DFC idx not updated
    • unexpected checksum error
    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • 論理ドライブをインポートするときにシステムがクラッシュする可能性がある問題を修正しました。
    • ]]>
  • Fix an issue that system may crash when importing Logical Drive.
    • ]]>
  • 論理ドライブをインポートするときにシステムがクラッシュする可能性がある問題を修正しました。
    • ]]>
  • Fix an issue that system may crash when importing Logical Drive.
    • ]]>         今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>         TBD

    ]]>         TBD

    ]]>         This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

    ]]>         This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

    ]]>
  • Updated Software Category
    • ]]>
  • Updated Software Category
    • ]]>
  • Updated installer.dll
    • ]]>
  • Updated installer.dll
    • ]]>
  • サポートされているプラットフォームを追加
    • ]]>
  • Added Supported Platforms
    • ]]>
  • Improves data integrity. 
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide a minor performance improvement.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Improves data integrity. 
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide a minor performance improvement.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>         TBD

    ]]>         TBD

    ]]>         この製品では、新しいGen11サーバーのサポートを追加しました。

    ]]>         This product added support to new Gen11 servers.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         バージョン20.43.2026には、変更も新機能も含まれていません。

    ]]>         No changes or new features have been included in version 20.43.2026.

    ]]>         以下の問題点がバージョン20.43.2026で修正されました：

    • サードパーティ製スイッチとのリンクアップの問題 (BCM53405)。
    • 競合状態を解決するためにCQ参照カウンターのアンダーフローを伴うファームウェアアサーション0x889fが発生する参照カウンターの問題。
    ]]>         The following issues have been fixed in version 20.43.2026:

    • A linkup issue vs a 3rd party switch (BCM53405).
    • A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.
    ]]>
  • 適切な操作と正確なデータ読み取りを保証するために DFC設定が改善されました。
  • 強化されたSES機能により、特定の設定は変更されません。
    • ]]>
  • Improved DFC settings to ensure proper operation and accurate data reading.
  • Enhanced SES functionality so certain settings remain unchanged.
    • ]]>
  • エラーを引き起こす可能性があるPWDISの問題を修正しました。
  • ベイ 11 および 12にドライブを追加するとリセットが発生したり、ドライブが見つからなくなったりする問題を解決しました。
    • ]]>
  • Fixed an issue with PWDIS that could cause errors.
  • Resolved a problem where adding drives to bays 11 and 12 caused resets or missing drives.
    • ]]>         新バージョン1.16

    ]]>         New vesion with 1.16

    ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • This product fixes an issue where the speed may be downgraded to Gen3.
  • This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.
  • This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.
  • This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.
  • This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.
  • This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.
  • This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.
    • ]]>
  • A Drive Firmware enhancement has been made for  Primera 600 products to reduce the probability of infrequent, unexpected power loss on some backed drives.
    • ]]>
  • A Drive Firmware enhancement has been made for  Primera 600 products to reduce the probability of infrequent, unexpected power loss on some backed drives.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         This product fixes to align DDP with the new FW version and NVM 4.71.

    ]]>         This product fixes to align DDP with the new FW version and NVM 4.71.

    ]]>         Initial version for VMware 9.0.

    ]]>         Initial version for VMware 9.0.

    ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         For SEP2025 SPP

    ]]>         For SEP2025 SPP

    ]]>
  • RHEL10サポートを追加しました
    • ]]>
  • Added RHEL10 support
    • ]]>         TBD

    ]]>         TBD

    ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         バージョン14.4.473.24にアップデートしました

    ]]>         Updated to version 14.4.473.24

    ]]>         以下のサポートを追加しました。

    Red Hat Enterprise Linux 10.0

    バージョン14.4.473.24にアップデートしました

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No new features and changes have been included in version 22.45.1020.

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No new features and changes have been included in version 22.45.1020.

    ]]>         The following issues have been fixed in version 22.45.1020:

    • PCC_CNP_COUNT could not be reset using the pcc_counter.sh script in the DOCA tools.
    • VQoS algorithm issue related to learning when an element is active and when it begins sending traffic.
    • A race condition that would prevent the application from transmitting when VQoS was enabled.
    • Bandwidth would drop when unbinding multiple VFs with VQoS enabled.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         The following issues have been fixed in version 22.45.1020:

    • PCC_CNP_COUNT could not be reset using the pcc_counter.sh script in the DOCA tools.
    • VQoS algorithm issue related to learning when an element is active and when it begins sending traffic.
    • A race condition that would prevent the application from transmitting when VQoS was enabled.
    • Bandwidth would drop when unbinding multiple VFs with VQoS enabled.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         セキュリティ強化の機能強化 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能強化が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨します。

     

    バージョン22.44.1036には、以下の新機能と変更が含まれます。

    • 同じPF上の異なるVF間で統合PTPがサポートされるようになりました。
    • 新しいNV構成 (SM_DISABLE、デフォルト0) が追加されました。これを有効にすると、SMから発信されていないSMPトラフィックがブロックされます。
    • PFCCアクセスレジスターのパラメーターとしてケーブル長を設定する機能を追加しました。ケーブルの長さは、サイズ、Xoff、Xon しきい値などの RXロスレスバッファーパラメーターの計算に使用されます。
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 22.44.1036:

    • Unified PTP is now supported across different VFs on the same PF.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         以下の問題点がバージョン22.44.1036で修正されました：

    • エミュレーションドアベルが故障すると、トラフィックが停止し、回復が妨げられます。
    ]]>         The following issues have been fixed in version 22.44.1036:

    • Traffic would halt and recovery would be prevented when the emulation doorbell malfunctioned.
    ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、現在Red Hat Enterprise Linux 9.5をサポートします。

    ]]>         This product now supports Red Hat Enterprise Linux 9.5.

    ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点：

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         iLO 6のサポートを開始しました。

    ]]>         Introduced support for iLO 6.

    ]]>         Introduced support for iLO 6.

    ]]>         Introduced support for iLO 6.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>         バージョン14.4.473.24にアップデートしました

    ]]>         Updated to version 14.4.473.24

    ]]>         以下のサポートを追加しました。

    Red Hat Enterprise Linux 10.0

    バージョン14.4.473.24にアップデートしました

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    SUSE Linux Enterprise 15 Service Pack 7

    Updated to version 14.4.473.26

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    SUSE Linux Enterprise 15 Service Pack 7

    Updated to version 14.4.473.26

    ]]>         バージョン14.4.473.7にアップデートしました

    ]]>         Updated to version 14.4.473.7

    ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>
  • コントローラーがオフラインの場合でも、ドライブがOSレベルでリストされる問題を修正しました。
    • ]]>
  • Fixed an issue that drives are still listed at the OS level when the controller is offline.
    • ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、tg3ドライバーがdmesgで正しいtg3ドライバー名を報告しない問題を修正しました。

    ]]>         This product fix issue where tg3 driver doesn't report correct tg3 driver name in dmesg.

    ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>         SR 2.10.0/SR 3.5.0 RC

    ]]>
  • コントローラーがオフラインの場合でも、ドライブがOSレベルでリストされる問題を修正しました。
    • ]]>
  • Fixed an issue that drives are still listed at the OS level when the controller is offline.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • RSOD issue fixed. RSOD was occurred during server power-on if enable the VROC.
    • ]]>
  • RSOD issue fixed. RSOD was occurred during server power-on if enable the VROC.
    • ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         バージョン26.45.1020にアップグレードされました

    ]]>         Upgraded to version 26.45.1020

    ]]>         バージョン26.43.1014にアップグレードされました

    ]]>         Upgraded to version 26.43.1014

    ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         バージョン25.01-0.6.0.1には、次の新機能と変更が含まれています。

    • [ConnectX-7] マルチホストLAG：マルチホスト展開を使用する場合、各ホストには固有のポートとPFが割り当てられ、独自のLAGを管理します。
    • ハードウェアGRO：ハードウェアGRO (Generic Receive Offload) は、受信ネットワークパケットを再構成するタスクをCPUからオフロードすることで、CPUのオーバーヘッドを低減し、スループットを向上させます。
    • Precision Time Measurement (PTM)：Precision Time Measurement (PTM) は、NICのハードウェアクロックとシステムのホストクロック間のクロック同期の精度を向上させます。これは、PTPに影響を与える可能性がある、PCIeの非対称の要求時間と応答時間によって発生する不正確さを解決します。
    • トランスポートRDMAステアリングドメイン：カーネル内のトランスポートRDMAステアリングドメインにより、ユーザーは新しいドメインタイプFS_FT_RDMA_TRANSPORT_RXおよびFS_FT_RDMA_TRANSPORT_TXを使用してステアリングテーブルとルールを作成でき、DevXコマンドとmlx5dv_create_flow_matcher() の追加機能との両方がサポートされます。
    • DevX QPパラレルクリーンアップ：ユーザー側での変更を必要とせずに、DevX QPを使用するユーザー空間アプリケーションのクリーンアップ (kill) 時間を短縮します。このパッチを含むカーネルを使用すると、クリーンアップ時のDevX QPの破棄が以前のようにシリアルではなく、パラレルでファームウェアに送信されるため、クリーンアップ時間が短縮されます。アプリケーションに含まれるDevX QPの数が多いほど、改善は顕著になります。
    • 要求されたMADのフロー制御：受信側のリソース不足による損失を防ぐために、MADレイヤーで要求されたMADのフロー制御を実装します。クライアントとサーバーは両方ともレシーバーとして機能します。サーバーは受信した要求を処理し、クライアントは応答を受信します。
    • IPoIBのTXキューのデフォルトの長さを増やすことで、qdiscキューイングを強化し、CPUスパイクを削減しました。
    • "--defltprio"フラグは非推奨となり、mlnx_qosツールから削除されました。
    ]]>         The following new features and changes have been included in version 25.01-0.6.0.1

    • [ConnectX-7] Multi-host LAG: When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
    • Hardware GRO: Hardware Generic Receive Offload (GRO) reduces CPU overhead and improves throughput by offloading the task of reassembling incoming network packets from the CPU.
    • Precision Time Measurement (PTM): Precision Time Measurement (PTM) enhances clock synchronization accuracy between the NIC's hardware clock and the system's host clock. It addresses inaccuracies caused by asymmetric PCIe request and response times, which can affect PTP.
    • Transport RDMA Steering Domain: Transport RDMA steering domain in the kernel allows users to create steering tables and rules using the new domain types FS_FT_RDMA_TRANSPORT_RX and FS_FT_RDMA_TRANSPORT_TX, with support for both DevX commands and the added functionality in mlx5dv_create_flow_matcher().
    • DevX QPs Parallel Cleanup: Reduces cleanup (kill) time of user-space applications that use DevX QPs, without requiring any changes on the user's end. When using a kernel that includes this patch, DevX QP destruction upon cleanup will be sent to the firmware in parallel, rather than serially as before, resulting in faster cleanup times. The more DevX QPs the application has, the more noticeable the improvement will be.
    • Flow Control for Solicited MADs: Implements flow control for solicited MADs in the MAD layer to prevent loss due to insufficient resources at the receiver. Both the client and server function as receivers: the server handles incoming requests, while the client receives the responses.
    • Increased the default TX queue length in IPoIB to enhance qdisc queueing and reduce CPU spikes.
    • The "--defltprio" flag has been deprecated and removed from the mlnx_qos tool.
    ]]>         以下の問題点がバージョン25.01-0.6.0.1で修正されました。

    • SC上に複数のアクティブなTX SAが作成されると、"encoding_sa"によって構成されたSAに配慮しないことが原因で、SAの切り替えが不正確になります。
    • 受信キューのキャッシュサイズの計算が正しくありません。
    ]]>         The following issues have been fixed in version  25.01-0.6.0.1:

    • Incorrect SA switching when multiple active TX SAs are created on a SC, caused by failing to respect the SA configured by "encoding_sa".
    • Incorrect receive queue cache size calculation.
    ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Support SY480 Gen12 server.

    ]]>         Support SY480 Gen12 server.

    ]]>         RL300 Gen11サーバーおよびGen12サーバーをサポート

    ]]>         Support RL300 Gen11 server and Gen12 servers.

    ]]>
  • This FW update contains the fix for false ILO message of temporary drive "degraded" status.
    • ]]>
  • This FW update contains the fix for false ILO message of temporary drive "degraded" status.
    • ]]>         HPK3のファームウェアメンテナンスリリース

    • このバージョンのFWでは、データセンターNVMe SSD仕様に従って、UUIDがリトルエンディアンからビッグエンディアンに変更されていることに注意してください。 このUUIDの変更に応じて、システムアプリケーションを適宜アップデートする必要があります。  
    • ドライブFWをHPK3からHPK2にダウングレードする必要がある場合は、リセット/PORが必要です。
    • FWをHPK3にアップデートすると、SSIDはa801から03b5に変更されます。

     

    ]]>         Firmware maintenance release of HPK3

    • Please note this version of FW has applied UUID change from little endian to big endian per Datacenter NVMe SSD Spec. System application should be updated accordingly per this UUID change.  
    • If drive FW needs to downgrade from HPK3 to HPK2, a reset/POR is required.
    • SSID will change from a801 to 03b5 after FW update to HPK3.

     

    ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • RHEL 10のサポートを追加しました。
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • A minor reliability enhancement involving an extra head cleaning operation
  • Preventive corner-case and situational adjustments for a potential Read hang, rare weak read and some “housekeeping” items (display, command outputs, delay on power-up and log maintenance)
    • ]]>
  • A minor reliability enhancement involving an extra head cleaning operation
  • Preventive corner-case and situational adjustments for a potential Read hang, rare weak read and some “housekeeping” items (display, command outputs, delay on power-up and log maintenance)
    • ]]>         For Sep SPP 2025

    ]]>         For Sep SPP 2025

    ]]>
  • 「pd all show detail」が使用される場合、物理ドライブの情報ページに書き込みキャッシュステータスフィールドが追加されました。
    • ]]>
  • Added Write Cache Status field to the info page for physical drives when "pd all show detail" is used.
    • ]]>
  • パリティ初期化メッセージの誤った表現を修正しました。
  • 脆弱性CVE-2023-45853を修正しました。
    • ]]>
  • Corrected wrong wording of Parity Initialization messages.
  • Fixed vulnerability CVE-2023-45853.
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • 工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加
    • コマンド: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>         重要な注意：

    このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    このバージョンには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

    既知の問題点：

    なし

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel® Xeon® Scalable Processors.

    Known Issues:

    None

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn disappeared after reconfiguring the NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Addressed an issue where the IML for DIMM mapped out may not be not logged.

    Known Issues:

    None]]>         DIMMのシリアル番号が"00000000"と識別された場合、IMLが記録されます。

    ]]>         An IML will be logged if the DIMM serial number is identified as "00000000"

    ]]>         重要な注意：

    システムROMのこのリビジョンには、AMD第5世代EPYCプロセッサー用のAMDリファレンスコードTurinPI 1.0.0.6が含まれています。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    Microsoft Secured-coreサポートが有効になっている場合にシステムがハングする可能性がある問題に対処しました。

    日本語でページを切り替えているときにRBSUでシステムがハングする可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This revision of the System ROM includes AMD reference code TurinPI 1.0.0.6 for AMD 5th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may hang when Microsoft secure-core support is enabled.

    Addressed an issue where system may hang at RBSU while switch pages in Japanese language.

    Known Issues:

    None]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    No new features and changes have been included in version 26.45.1020.

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    No new features and changes have been included in version 26.45.1020.

    ]]>         The following issues have been fixed in version 26.45.1020:

    • Configuring PHY_RATE_MASK for 10G in NV settings incorrectly disabled 10G capabilities.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         The following issues have been fixed in version 26.45.1020:

    • Configuring PHY_RATE_MASK for 10G in NV settings incorrectly disabled 10G capabilities.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         セキュリティ強化の機能強化 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能強化が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨します。
     

    バージョン26.44.1036には、以下の新機能と変更が含まれます。

    • 利用可能なすべてのPFに対してget_pf_mac_address関数を有効にしました。
    • PTPパケットのトラフィック管理を強化し、通常のネットワークトラフィックへの影響を軽減します。
    • 新しいNV構成 (SM_DISABLE、デフォルト0) が追加されました。これを有効にすると、SMから発信されていないSMPトラフィックがブロックされます。
    • PFCCアクセスレジスターのパラメーターとしてケーブル長を設定する機能を追加しました。ケーブルの長さは、サイズ、Xoff、Xon しきい値などの RXロスレスバッファーパラメーターの計算に使用されます。
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.44.1036:

    • Enabled the get_pf_mac_address function for all available PFs.
    • Enhanced traffic management of PTP packets to reduce their impact on regular network traffic.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         以下の問題点がバージョン26.44.1036で修正されました：

    • 競合状態を解決するためにCQ参照カウンターのアンダーフローを伴うファームウェアアサーション0x889fが発生する参照カウンターの問題。
    ]]>         The following issues have been fixed in version 26.44.1036:

    • A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.
    ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    No new features and changes have been included in version 26.45.1020.

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    No new features and changes have been included in version 26.45.1020.

    ]]>         The following issues have been fixed in version 26.45.1020:

    • Configuring PHY_RATE_MASK for 10G in NV settings incorrectly disabled 10G capabilities.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         The following issues have been fixed in version 26.45.1020:

    • Configuring PHY_RATE_MASK for 10G in NV settings incorrectly disabled 10G capabilities.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         セキュリティ強化の機能強化 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能強化が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨します。
     

    バージョン26.44.1036には、以下の新機能と変更が含まれます。

    • 利用可能なすべてのPFに対してget_pf_mac_address関数を有効にしました。
    • PTPパケットのトラフィック管理を強化し、通常のネットワークトラフィックへの影響を軽減します。
    • 新しいNV構成 (SM_DISABLE、デフォルト0) が追加されました。これを有効にすると、SMから発信されていないSMPトラフィックがブロックされます。
    • PFCCアクセスレジスターのパラメーターとしてケーブル長を設定する機能を追加しました。ケーブルの長さは、サイズ、Xoff、Xon しきい値などの RXロスレスバッファーパラメーターの計算に使用されます。
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.44.1036:

    • Enabled the get_pf_mac_address function for all available PFs.
    • Enhanced traffic management of PTP packets to reduce their impact on regular network traffic.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         以下の問題点がバージョン26.44.1036で修正されました：

    • 競合状態を解決するためにCQ参照カウンターのアンダーフローを伴うファームウェアアサーション0x889fが発生する参照カウンターの問題。
    ]]>         The following issues have been fixed in version 26.44.1036:

    • A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.
    ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
    • ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
    • ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>
  • Signed with SHA384
    • ]]>
  • Signed with SHA384
    • ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>         Driver version 5.5.85.1
    This driver is only supported on VMware ESXi 9.0

    ]]>         Driver version 5.5.85.1
    This driver is only supported on VMware ESXi 9.0

    ]]>         ドライバーバージョン5.4.83.1
    このドライバーは、VMware ESXi 9.0でのみサポートされています。

    ]]>         Driver version 5.4.83.1
    This driver is only supported on VMware ESXi 9.0

    ]]>
  • Change the backplane bay count information to the actual bay that is connected to controller.
  • Add support for users to clear NVRAM using Factory Repurpose operation
  • Re-order MRSA GUI buttons
    • Move the Rebuild button to the top before Make Online button
    • Add the Rebuild button in the Offline Drive warning session
  • Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.
    • ]]>
  • Change the backplane bay count information to the actual bay that is connected to controller.
  • Add support for users to clear NVRAM using Factory Repurpose operation
  • Re-order MRSA GUI buttons
    • Move the Rebuild button to the top before Make Online button
    • Add the Rebuild button in the Offline Drive warning session
  • Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.
    • ]]>
  • バックプレーンベイ数情報を、コントローラーに接続されている実際のベイに変更。
  • 工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加
  • LSA GUIボタンの順序を変更
    • [Rebuild]ボタンを[Make Online]ボタンの前に移動
    • オフラインドライブの警告セッションに[Rebuild]ボタンを追加
  • 劣化したボリュームの推奨アクションを[Make sure all the participating drives are connected and rebuild is complete]に変更。
    • ]]>
  • Change the backplane bay count information to the actual bay that is connected to controller.
  • Add support for users to clear NVRAM using Factory Repurpose operation
  • Re-order LSA GUI buttons
    • Move the Rebuild button to the top before Make Online button
    • Add the Rebuild button in the Offline Drive warning session
  • Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.
    • ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn was disappear after reconfiguring NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.G for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where incorrect Structure Boot Name may show in the OS boot option.

    Addressed an issue where the UUID of HostNqn was disappear after reconfiguring NVMe-oF initiator name.

    Addressed an issue where BIOS settings may not be applied while upgrading BIOS and changing BIOS settings at the same time.

    Known Issues:

    None]]>         システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    システム構成 (RBSU) オプション"PCIeデバイス構成/アドバンストPCIe構成/PCIeホットプラグエラー制御"が追加され、デフォルトで"ホットプラグサプライズ"に設定されました。この設定には、次のRedfishプロパティがあります。

    /redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

    ]]>         Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    Added the System Configuration (RBSU) option "PCIe Device Configuration/Advanced PCIe Configuration/PCIe Hot-Plug Error Control" and set to "Hot-Plug Surprise" by default. This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

    ]]>         重要な注意：

    システムROMのこのリビジョンには、AMD第4世代EPYCプロセッサー用のAMDリファレンスコードGenoaPI 1.0.0.Fが含まれています。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    ファームウェアアップデートの実行中に、システムでRSODが発生してファームウェアのアップデートに失敗する可能性がある問題に対処しました。

    NVMe-oFターゲットにパーティションがない場合にシステムでRSODが発生する可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

    Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

    Known Issues:

    None]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Assertの修正、現在のファームウェアの改善、およびバグ修正を修正します。
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>         Updated Driver version 10.02.14.00-k1

    ]]>         Updated Driver version 10.02.14.00-k1

    ]]>         ドライバーをバージョン10.02.13.03-k1にアップデートしました

    ]]>         Updated Driver version 10.02.13.03-k1

    ]]>         TBD

    ]]>         TBD

    ]]>         この製品は、最新のドライバーとの互換性を強化しました。

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • ESXi 9.0のサポートを追加しました
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Addresses a hot plug reporting concern
  • Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration
    • ]]>
  • Addresses a hot plug reporting concern
  • Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration
    • ]]>
  • この製品は、ユーザーモードのRDMA中止クリーンアップを改善するように強化されています。
  • この製品は、デバイスのリセット後も機能するようにホストへのFWログ記録を強化します。
    • ]]>
  • This product enhances to improve user mode RDMA abortive cleanup.
  • This product enhances FW logging to host to work across device reset.
    • ]]>
  • この製品は、Windows Server 2025 OS を ISCSI LUNにインストールするとBSOD(ブルー スクリーン) が発生する問題を修正します。
  • この製品は、ジャンボフレームが有効になっている場合にパケットドロップが発生する問題を修正します。
    • ]]>
  • This product fixes issue where BSOD (Blue Screen of Death) occurs when install Windows Server 2025 OS on ISCSI LUN.
  • This product fixes issue where packet drops is seen when jumbo frame is enabled.
    • ]]>
  • この製品は、ユーザーモードのRDMA中止クリーンアップを改善するように強化されています。
  • この製品は、デバイスのリセット後も機能するようにホストへのFWログ記録を強化します。
    • ]]>
  • This product enhances to improve user mode RDMA abortive cleanup.
  • This product enhances FW logging to host to work across device reset.
    • ]]>
  • この製品は、Windows Server 2025 OS を ISCSI LUNにインストールするとBSOD(ブルー スクリーン) が発生する問題を修正します。
  • この製品は、ジャンボフレームが有効になっている場合にパケットドロップが発生する問題を修正します。
    • ]]>
  • This product fixes issue where BSOD (Blue Screen of Death) occurs when install Windows Server 2025 OS on ISCSI LUN.
  • This product fixes issue where packet drops is seen when jumbo frame is enabled.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>         This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

    ]]>         This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.058.0 (2.20_03_03_2025) should be paired with System ROM 2.20_03-21-2025.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.058.0 (2.20_03_03_2025) should be paired with System ROM 2.20_03-21-2025.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

    Known Issues:

    None]]>         重要な注意:

    このバージョンのServer Platform Services（SPS）ファームウェアには、Intel Xeon E-2400シリーズプロセッサー用の最新パッケージが含まれています。 このバージョンのSPS 6.03.04.048.0 (2.10_12_03_2024)は、システムROM 2.10_12-06-2024と組み合わせる必要があります。

    ファームウェアの依存関係：

    なし

    機能強化/新しい機能：

    このバージョンは、Intel Catlow RPL-E PLR2 および Intel Catlow RPL-E Refresh PV ガイダンスに準拠しています。

    既知の問題点:

    なし]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.048.0 (2.10_12_03_2024) should be paired with System ROM 2.10_12-06-2024.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel Catlow RPL-E PLR2 and Intel Catlow RPL-E Refresh PV guidance.

    Known Issues:

    None]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • コントローラーライブラリの互換性の問題を修正しました。
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Azure Stack HCI 23H2のサポートを追加しました
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         New version.

    ]]>         New version.

    ]]>         セキュアブートが有効にならない問題を修正しました。

    ]]>         Fixed Secure boot not enable.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • 以前のファームウェアバージョンHPK5では、修正不可能なマシンチェック例外 (UMCE) が発生する可能性があります。ファームウェアバージョンを少なくともHPK6へアップデートすることが推奨されます。
  • 詳しくは、CAが後で次のURLで公開されます。https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_usを参照してください。
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA will published later at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • SDR方式によるフラッシュの問題を修正しました
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Instead of using sed command, using awk command to fetch the right column name

    ]]>         Instead of using sed command, using awk command to fetch the right column name

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Added new "UMONITOR" option in "System Configuration -> RBSU -> Processor Options".

    This setting has the following Redfish property:

    "/redfish/v1/systems/1/bios/settings/UMonitor".

    Added new "CPU C1 Auto Demotion" and "CPU C1 Auto Undemotion" options in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/CStateAutoDemotion

    /redfish/v1/systems/1/bios/settings/CStateAutoUnDemotion

    Added new "Uncore Frequency RAPL" option in "System Configuration -> RBSU -> Power and Performance options".

    This setting has the following Redfish property:

    /redfish/v1/systems/1/bios/settings/UncoreFreqRAPL

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel EagleStream IPU2025.3 update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.204.0 (2.60_07_28_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system RBSU setting change might not take effect when the System ROM is being updated.

    Addressed an issue where the NVMe-oF target UUID might disappear after changing the NVMe-oF Initiator name in RBSU.

    Addressed an issue where the system might not be able apply server profile when boot option is enabled for Smart Array Controller.

    Addressed an issue where the system might be halted at RBSU menu during page switching when working in Japanese language mode.

    Addressed an issue where the system might encounter "Uncorrectable Machine Check Exception" with "Bank 0x4" during system reboot in SUSE Linux Xen OS environment.

    Known Issues:

    None]]>         FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

    システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

    特定のCPU温度エラーによって引き起こされる潜在的なシステムシャットダウンを防ぐための機能強化を導入しました。

    ]]>         Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

    Added help text for "Smooth Cooling" in system configuration (RBSU) option.

    Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

    ]]>         重要な注意：

    このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

    報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

    ファームウェアの依存関係：

    なし

    修正された問題点:

    MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

    OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

    システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

    Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

    既知の問題点：

    なし]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

    Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

    Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

    Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

    Known Issues:

    None]]>         TBD

    ]]>         TBD

    ]]>
  • このFWPKGからROMフラッシュウェイを削除します。
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • ランダム読み取り/書き込みパフォーマンスを向上します。
    • ]]>
  • Improve random read/write perfomance.
    • ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         バージョン25.01-0.6.0.1には、次の新機能と変更が含まれています。

    • [ConnectX-7] マルチホストLAG：マルチホスト展開を使用する場合、各ホストには固有のポートとPFが割り当てられ、独自のLAGを管理します。
    • ハードウェアGRO：ハードウェアGRO (Generic Receive Offload) は、受信ネットワークパケットを再構成するタスクをCPUからオフロードすることで、CPUのオーバーヘッドを低減し、スループットを向上させます。
    • Precision Time Measurement (PTM)：Precision Time Measurement (PTM) は、NICのハードウェアクロックとシステムのホストクロック間のクロック同期の精度を向上させます。これは、PTPに影響を与える可能性がある、PCIeの非対称の要求時間と応答時間によって発生する不正確さを解決します。
    • トランスポートRDMAステアリングドメイン：カーネル内のトランスポートRDMAステアリングドメインにより、ユーザーは新しいドメインタイプFS_FT_RDMA_TRANSPORT_RXおよびFS_FT_RDMA_TRANSPORT_TXを使用してステアリングテーブルとルールを作成でき、DevXコマンドとmlx5dv_create_flow_matcher() の追加機能との両方がサポートされます。
    • DevX QPパラレルクリーンアップ：ユーザー側での変更を必要とせずに、DevX QPを使用するユーザー空間アプリケーションのクリーンアップ (kill) 時間を短縮します。このパッチを含むカーネルを使用すると、クリーンアップ時のDevX QPの破棄が以前のようにシリアルではなく、パラレルでファームウェアに送信されるため、クリーンアップ時間が短縮されます。アプリケーションに含まれるDevX QPの数が多いほど、改善は顕著になります。
    • 要求されたMADのフロー制御：受信側のリソース不足による損失を防ぐために、MADレイヤーで要求されたMADのフロー制御を実装します。クライアントとサーバーは両方ともレシーバーとして機能します。サーバーは受信した要求を処理し、クライアントは応答を受信します。
    • IPoIBのTXキューのデフォルトの長さを増やすことで、qdiscキューイングを強化し、CPUスパイクを削減しました。
    • "--defltprio"フラグは非推奨となり、mlnx_qosツールから削除されました。
    ]]>         The following new features and changes have been included in version 25.01-0.6.0.1

    • [ConnectX-7] Multi-host LAG: When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
    • Hardware GRO: Hardware Generic Receive Offload (GRO) reduces CPU overhead and improves throughput by offloading the task of reassembling incoming network packets from the CPU.
    • Precision Time Measurement (PTM): Precision Time Measurement (PTM) enhances clock synchronization accuracy between the NIC's hardware clock and the system's host clock. It addresses inaccuracies caused by asymmetric PCIe request and response times, which can affect PTP.
    • Transport RDMA Steering Domain: Transport RDMA steering domain in the kernel allows users to create steering tables and rules using the new domain types FS_FT_RDMA_TRANSPORT_RX and FS_FT_RDMA_TRANSPORT_TX, with support for both DevX commands and the added functionality in mlx5dv_create_flow_matcher().
    • DevX QPs Parallel Cleanup: Reduces cleanup (kill) time of user-space applications that use DevX QPs, without requiring any changes on the user's end. When using a kernel that includes this patch, DevX QP destruction upon cleanup will be sent to the firmware in parallel, rather than serially as before, resulting in faster cleanup times. The more DevX QPs the application has, the more noticeable the improvement will be.
    • Flow Control for Solicited MADs: Implements flow control for solicited MADs in the MAD layer to prevent loss due to insufficient resources at the receiver. Both the client and server function as receivers: the server handles incoming requests, while the client receives the responses.
    • Increased the default TX queue length in IPoIB to enhance qdisc queueing and reduce CPU spikes.
    • The "--defltprio" flag has been deprecated and removed from the mlnx_qos tool.
    ]]>         以下の問題点がバージョン25.01-0.6.0.1で修正されました。

    • SC上に複数のアクティブなTX SAが作成されると、"encoding_sa"によって構成されたSAに配慮しないことが原因で、SAの切り替えが不正確になります。
    • 受信キューのキャッシュサイズの計算が正しくありません。
    ]]>         The following issues have been fixed in version  25.01-0.6.0.1:

    • Incorrect SA switching when multiple active TX SAs are created on a SC, caused by failing to respect the SA configured by "encoding_sa".
    • Incorrect receive queue cache size calculation.
    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Assertの修正、現在のファームウェアの改善、およびバグ修正を修正します。
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>