Initial Build

]]> Initial Build

]]> • RESTおよびHPE iLO UIの前面のOCPAおよびOCPBラベルの名前をOCPスロットA およびOCPスロット Bに変更しました。

• RESTおよびHPE iLO UIの背面のOCPAおよびOCPBラベルの名前をOCPスロットA およびOCPスロット Bに変更しました。

• HPE iLO Redfishがエアフィルターの交換に関する明確なイベント通知を発行する機能。

• Azure Stack HCI 23H2 OSのサポート。

• HPE ブランドガイドラインに準拠しました。

• HPE iLOにHPE Compute Ops Managementを含むHPE ProLiant Advancedライセンスの追加。

• 仮想メディアマウントのURLの長さのサポートが1023文字に増加しました。

]]> • Renamed the front OCPA and OCPB labeling in REST and HPE iLO UI to OCP Slot A and OCP Slot B.

• Renamed the rear OCPA and OCPB labeling in REST and HPE iLO UI to OCP Slot A and OCP Slot B.

• Ability of HPE iLO Redfish to raise a clear event notification for an air filter replacement.

• Support for Azure Stack HCI 23H2 OS.

• Adhered to HPE branding guidelines.

• Addition of HPE ProLiant Advanced License to HPE iLO with HPE Compute Ops Management.

• Support for the Virtual Media Mount URL length increased to 1023 characters.

]]> • VSPログバッファ処理のスタックオーバーフローが原因で、DL360 Gen11 HPE iLO6にVSP出力がない問題を修正しました。
• HPE ProLiant Compute DL384 プラットフォームのメモリのヘルスステータスが低下しているように見える問題を修正しました。
• サーバーデバイスの検出が vMainDeviceDiscoveryCompleteに到達しないために、ファン速度が熱構成どおりに設定されない問題を修正しました。
• サブスクリプションに対してmTLSを有効にできず、クライアントの秘密キーの読み込み時にエラーが返される問題を修正しました。

]]> • Fixed an issue where there was no VSP output on DL360 Gen11 HPE iLO6 due to stack overflow on VSP log buffer handling.
• Fixed an issue where the memory health status on HPE ProLiant Compute DL384 platforms appeared to be degraded.
• Fixed an issue where the fan speed was not set as per the thermal configuration due to server device discovery not reaching vMainDeviceDiscoveryComplete.
• Fixed an issue that did not allow to enable mTLS for subscription and returned error in loading client private key.

]]>

Added support for Azure Stack HCI 23H2

]]>

Added support for Azure Stack HCI 23H2

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Added support for:

Red Hat Enterprise Linux 10.0

Updated to version 14.4.473.24

]]> Added support for:

Red Hat Enterprise Linux 10.0

Updated to version 14.4.473.24

]]>

PLDMベース (タイプ 0) コマンドは、PLDM ベース仕様 (DSP0240) の v1.2.0 に準拠しています。

PLDM プラットフォーム監視および制御 (タイプ 2) コマンドは、PLDMプラットフォーム監視および制御仕様 (DSP0248) のv1.3.0に準拠しています。

RedfishおよびストレージリソースRDEアクション操作を使用したボリュームの作成/削除の長期実行タスクのサポート。

]]>

PLDM Base (Type 0) commands comply with v1.2.0 of the PLDM base specification (DSP0240).

PLDM Platform Monitoring and Control (Type 2) commands comply with v1.3.0 of the PLDM Platform Monitoring and Control Specification (DSP0248).

Long-running task support for volume creation/deletion using Redfish and storage resource RDE action operations.

]]>

RAID 0予測スペア再構築(PSR)の開始時にロックアップが発生することがある問題を修正しました。

交換したSSDドライブの再構築プロセス中に障害LEDが点灯したままになる問題を修正しました。

PFドライブまたは低速ドライブ上に論理ドライブを作成した後、ホストが新しい構成のアップデートを取得できない問題を修正しました。

再起動前にデータドライブがその他の所有者のSEDドライブに置き換えられた場合、セキュリティ保護されたボリュームの論理ボリュームステータスが誤ってOKと報告される問題を修正しました。

工場出荷時の状態にリセットした後、表面スキャン期間がデフォルトにリセットされない問題を修正しました。

予測スペア再構築 (PSR) が完了した後でも予測障害ドライブが障害にならない問題を修正しました。

JBOD電源サイクル後にコントローラーがロックアップする可能性がある問題を修正しました。

スペア再構築中に故障したドライブをオフラインで交換すると、交換ドライブが故障する問題を修正しました。

突然のシャットダウンを伴う変換中とその後の起動時の両方で発生する可能性のあるロックアップを修正しました。

正常なドライブが誤って予測障害ドライブとしてマークされる可能性がある問題を修正しました。

Smart Pathを使用して劣化したボリュームへのI/Oを実行しているときに発生する可能性があるロックアップの問題を修正しました。

特定のSATAドライブで、センスデータが正しく処理されないためにドライブファームウェアのアップデートが失敗する問題を修正しました。

PCIe Gen 6システムに挿入されている場合にコントローラーの起動が失敗する問題を修正しました。

HII論理ドライブ情報にアクティブな専用ホットスペアメンバーが見つからない問題と、HIIディスクユーティリティの論理ドライブのドライブ部分に障害が発生する問題を修正しました。

アダプターパスワードを待機しているコントローラーでアレイを作成するときに、間違ったエラーコード「InternalError」が送られる問題を修正しました。

エンクロージャーにドライブが接続されていない状態でサーバーの電源がオンになった場合の問題を修正しました。iLOのストレージタブとRedfishで不正なコントローラー情報を確認

RedfishのストレージURIでエンクロージャーリンクが見つからない問題を修正しました。

空のベイのドライブリソースがシャーシと一致しない問題を修正しました。

サニタイズ消去操作の進行中にドライブの誤った重大度の警告が表示される問題を修正しました。

通常の状態でHealthRollupが警告を表示する問題を修正しました。

WriteCacheが劣化しているときにCacheSummary.Status.Healthが正しく表示されない問題を修正しました。

アレイの削除中にPLDM/RDE読み取りに6秒以上かかることがある問題を修正しました。

]]>

Fixed an issue where a lockup occasionally occurs when RAID 0 Predictive Spare Rebuilding (PSR) starts.

Fixed an issue where the fault LED remains lit during the rebuild process of a replaced SSD drive.

Fixed an issue where the host was unable to retrieve new configuration updates after creating a logical drive on PF drives or slow drives.

Fixed an issue where the logical volume status was incorrectly reported as OK on a secured volume if a data drive was replaced with an Otherwise Owned SED drive before reboot.

Fixed an issue where the surface scan period was not reset to default after factory reset.

Fixed an issue where the predictive failure drive did no€t fail even after the Predictive Spare Rebuild (PSR) was completed.

Fixed an issue where the Controller might have a potential lockup after a JBOD power cycle.

Fixed an issue where the offline replacement of a failed drive during a spare rebuild led to the failure of the replacement drive.

Fixed a possible lockup that could occur both during a transformation with an abrupt shutdown, and on subsequent bootup.

Fixed a potential issue where a good drive could be incorrectly marked as a predictive failure drive.

Fixed a lockup issue that could occur during I/O to a degraded volume using Smart Path.

Fixed a drive firmware update failure due to incorrect handling of sense data for specific SATA drives.

Fixed a Controller boot failure when inserted in PCIe Gen 6 systems.

Fixed issues for missing active dedicated hot spare member in HII logical drive information and failed drive part of a logical drive in the HII disk utilities.

Fixed an issue which threw wrong error code, 'InternalError’ when creating an array on controller that is waiting on adapter password.

Fixed an issue When server is powered on with no drives connected to Enclosure. Observe incorrect controller information in iLO Storage tab & Redfish

Fixed an issue that enclosures Link is missing under Storage URI in Redfish.

Fixed an issue in which drive resource does not match with Chassis for empty bay.

Fixed an issue in which incorrect severity warning of drive when sanitize erase operation is in progress.

Fixed an issue where HealthRollup shows warning during normal state.

Fixed an issue where CacheSummary.Status.Health shows incorrect during WriteCache degraded.

Fixed an issue in which PLDM/RDE Read sometimes take longer than 6s during array deletion.

]]> SR 2.9.2/SR 3.4.2 RC2

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> See the AMS Release Notes for information about the issues resolved in this release

]]> 今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> 今回のリリースで解決した問題については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the issues resolved in this release.

]]> New features and changes included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> New features and changes included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> The following issues have been fixed in version 28.44.1036:

Cable info semaphore deadlock.
Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.

]]> The following issues have been fixed in version 28.44.1036:

Cable info semaphore deadlock.
Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.

]]> バージョン28.43.1014には、以下の新機能と変更が含まれます。

PCIeテレメトリ (NSMタイプ2) のサポートが追加されました。
PCC NPソリューションをACEハードウェアプラットフォームからDPAハードウェアプラットフォームに移行しました。新しい機能は、次のモードに適用できます: 1) PCC_INT_EN=TrueかつPCC_INT_NP_RTT_DATA_MODE=INGRESS_BYTE 2) PCC_INT_EN=TrueかつPCC_INT_NP_RTT_DATA_MODE=NO_DATA。最初のモードは、RTT応答でZTRCC RXバイトをサポートするために使用されます。
eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。
拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

LAGにグループ化された複数のE-SwitchにわたるQoSスケジューリングのサポートが追加されました。ある物理機能のVPortメンバーを、別の物理機能からのレートグループに追加することができ、グループのレート制限はそれらのVPortメンバーにも適用されます。
ステアリングアクション (STC) の"Jump To Flow"テーブルパラメーターに'table_type_valid'および'table_type'フィールドが追加され、ユーザーがNIC_TXからFDB_TXにジャンプしてACLテーブルをバイパスできるようになりました。
さまざまなユースケースでNICドメインをバイパスすることでホップ削減を可能にしました。このようなアクションにより、大量のフローとデバイスを処理するためのホップ数が削減されます (PPSが向上します)。この新しい機能を有効にするために、テーブルのRX側にジャンプできるようにする新しいSTCアクションタイプ"JUMP_TO_FDB_RX"が追加されました。
動的フレックスパーサーでサポートされる"ARC-IN"の最大数を1から8に、"ARC-OUT"の最大数を3から8に増やしました。
PCC ZTR_RTTCにレートとラウンドトリップ時間 (RTT) のヒストグラムサポートが追加されました。
VF移行中にCQドアベルが失われた場合に備えて回復手順を追加しました。
VGAゲインとCTLEのためのPCIe Gen4/5の新しい静的構成を変更しました。
Gen4/5開始点のCTLEおよびVGAゲインを変更しました。
SPDMのRDT値を増加しました。

]]> New features and changes included in version 28.43.1014:

Added support for PCIe Telemetry (NSM Type 2).
Migrated PCC NP solution from ACE hardware platform to DPA hardware platform. The new capability is applicable to the following modes: 1) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=INGRESS_BYTE 2) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=NO_DATA. The first mode is used to support ZTRCC RX bytes in RTT response.
Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
Enabled hop reduction by bypassing NIC domain in various use cases. Such action reduces the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
Increased the maximum number of supported "ARC-IN" from 1 to 8 and "ARC-OUT" from 3 to 8 for the dynamic flex parser.
Added histogram support for rate and Round-Trip Time (RTT) in PCC ZTR_RTTC.
Added a recovery step in case of CQ doorbell getting lost during VF migration.
Changed PCIe Gen4/5 new static configuration for VGA gain and CTLE.
Changed the CTLE and VGA gain for Gen4/5 starting point.
Increased SPDM's RDT value.

]]> 以下の問題点がバージョン28.43.1014で修正されました：

アクティブなケーブルが接続されている場合にのみPLDMにポート温度センサーPDRが含まれている。
ポート速度が1Gまたは10Gに設定されている場合にPTPの精度が低下することがある。
動的MSIx機能が有効でvirtioエミュレーションが無効になっているときに、MSIx削減フローが誤った制限 (MSIxの合計数が誤って8kから4kに削減される) でトリガーされる。
光ファイバーケーブルを使用する場合、ロスレスパケットが400GB 4レーンでドロップする。
FACTORYデフォルトのNV構成値を照会するとき、ファームウェアは常に、適用される"次の"値を返す。
TP4設定の上書きに関連する問題。
まれに発生する証明書署名検証エラー。
マルチASICプラットフォームでモジュールを再挿入した後のケーブルリンクアッププロセスに誤りがある。
user_cc_enのデフォルト値 (mlxreg) が正しくない。

]]> The following issues have been fixed in version 28.43.1014:

PLDM included port temperature sensor PDR only if an active cable was connected.
PTP accuracy degradation occasionally occurred for port speed configured to 1G or 10G.
MSIx reduction flow was triggered with an incorrect limitation (the total number of MSIx is reduced from 8k to 4k by mistake) when the dynamic MSIx feature was enabled and virtio emulation was disabled.
Lossless packet drops at 400GB 4 lanes when using an optic fiber cable.
The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
An issue related to override TP4 settings.
A rare certificate signature verification error.
Erroneous cable linkup process after reinserting a module in multi ASIC platforms.
Incorrect user_cc_en default value (mlxreg).

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version of the SPS should be paired with System ROM 2.50.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> 重要な注意：

このバージョンのServer Platform Services（SPS）ファームウェアには、第4世代および第5世代Intel® Xeon®スケーラブルプロセッサーの最新パッケージが含まれています。このバージョンのSPSは、システムROM 2.50と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

このバージョンには、第4世代および第5世代Intel^® Xeon^®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

既知の問題点：

なし

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> TBD

]]> この製品は、tg3ドライバーがdmesgで正しいtg3ドライバー名を報告しない問題を修正しました。

]]> This product fix issue where tg3 driver doesn't report correct tg3 driver name in dmesg.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

]]> この製品は、Azure Stack HCI OSをサポートするようになりました。

]]> This product now supports Azure Stack HCI OS.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> No changes or new features have been included in version 20.43.2026.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

]]> セキュリティ強化の機能強化 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能強化が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨します。

バージョン20.43.1014には、以下の新機能と変更が含まれます。

eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。
拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

]]> Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

New features and changes included in version 20.43.1014:

Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

]]> 以下の問題点がバージョン20.43.1014で修正されました：

"create_sq"が無効なmboxを使用した場合、セットアップがクラッシュする。
FACTORYデフォルトのNV構成値を照会するとき、ファームウェアは常に、適用される"次の"値を返す。

]]> The following issues have been fixed in version 20.43.1014:

Setup crash when "create_sq" used invalid mbox.
The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> This product fixes to align DDP with the new FW version and NVM 4.71.

]]> Initial version for VMware 9.0.

]]> TBD

]]> 新しいプラットフォームのサポートを追加します。

]]> Add new support platform.

]]> Support SY480 Gen12 server.

]]> CMD 40 SESの内容を改良します。

]]> Refine CMD 40 SES content.

]]> i2cの問題を修正

DFC idxがアップデートされていない
予期しないチェックサムエラー

]]> Fix i2c issues

DFC idx not updated
unexpected checksum error

]]> Driver version 5.4.82.1

]]> Updated to version 1.0.0.1

]]> バージョン1.0.0.1にアップデートしました

]]> Updated to version 1.0.0.1

]]>

Support RHEL10 OS.

Support new Gen12 servers.

]]>

Support RHEL10 OS.

Support new Gen12 servers.

]]>

Azure Stack HCI 23H2 OSをサポートします。

新しいGen12 サーバーをサポートします。

]]>

Support Azure Stack HCI 23H2 OS.

Support new Gen12 servers.

]]>

Added RHEL10 support

]]>

Added RHEL10 support

]]>

「pd all show detail」が使用される場合、物理ドライブの情報ページに書き込みキャッシュステータスフィールドが追加されました。

]]>

Added Write Cache Status field to the info page for physical drives when "pd all show detail" is used.

]]>

パリティ初期化メッセージの誤った表現を修正しました。

脆弱性CVE-2023-45853を修正しました。

]]>

Corrected wrong wording of Parity Initialization messages.

Fixed vulnerability CVE-2023-45853.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for RHEL10.

]]>

Added support for RHEL10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> 1) Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
2) Adding other logging and FW enhancements.

]]> ホストのサーマル管理とレポートの最大連続動作温度値をアップデートします。

]]> Update maximum continuous operation temperature values for host thermal management and reporting.

]]>

This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

]]>

This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

特定のCPU温度エラーによって引き起こされる潜在的なシステムシャットダウンを防ぐための機能強化を導入しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

MRコントローラーページの論理ドライブの名前フィールドが、終了してMRコントローラーページに戻った後に、失われたり意図せず変更されたりする可能性がある問題に対処しました。

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> TBD

]]> TBD

]]> この製品は、ファームウェアの機能に基づいてRDMAフラグのアップデートを有効にすることで、RDMA機能を強化します。

]]> This product enhances RDMA functionality by enabling the RDMA flag update based on firmware capability.

]]>

この製品は、ダイナミック割り込みモデレーションが適切にシャットダウンできない問題を修正します。

この製品は、コアダンプファイルを生成するときにコアダンプファイルデコーダーがクラッシュする問題を修正します。

]]>

This product fixes the issue where Dynamic Interrupt Moderation fails to shut down properly.

This product fixes the issue where the coredump file decoder crashes when generating the summary of a coredump file.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]>

fix for genericmsi version

]]>

fix for genericmsi version

]]>

「pd all show detail」が使用される場合、物理ドライブの情報ページに書き込みキャッシュステータスフィールドが追加されました。

]]>

Added Write Cache Status field to the info page for physical drives when "pd all show detail" is used.

]]>

パリティ初期化メッセージの誤った表現を修正しました。

脆弱性CVE-2023-45853を修正しました。

]]>

Corrected wrong wording of Parity Initialization messages.

Fixed vulnerability CVE-2023-45853.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Driver version 5.5.85.1
This driver is only supported on VMware ESXi 9.0

]]> ドライバーバージョン5.4.83.1
このドライバーは、VMware ESXi 9.0でのみサポートされています。

]]> Driver version 5.4.83.1
This driver is only supported on VMware ESXi 9.0

]]> This product fixes an issue where the ice driver failed to load when the transmit balancing feature was enabled in the NIC HII menu.

]]> この製品は現在、新しいプラットフォームでサポートされています。

]]> This product is now supported on a new platform.

]]>

Updated Supported Environments

]]>

Updated Supported Environments

]]>

サポートされているプラットフォームを追加

]]>

Added supported platforms

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

ドライブがアサートを防ぐためにRequest Senseの前にR/Wコマンドを選択して実行する原因となった、メディアキャッシュクリーニングの中止処理のロジックバグを修正しました。

その他のログ機能とFW機能強化を追加します。

]]>

Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.

Adding other logging and FW enhancements.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> TBD

]]>

この製品は、nicclilomのインストール場所を正しいパスにアップデートするように強化されています。

この製品は、NETDEV_CHANGEイベントが発生したときにDCB設定を照会することで機能を強化します。

]]>

This product enhances to update the installation location for nicclilom to the correct path.

This product enhances functionality by querying DCB settings when the NETDEV_CHANGE event occurs.

]]>

この製品では、不正な帯域幅割り当てによるトラフィッククラス(TC)の枯渇を防ぐために、ETS検証の問題を修正しました。

この製品は、debugfs qp_infoがUDP送信元ポート値を正しく表示しない問題を修正します。

この製品は、シャットダウンまたはサスペンド中にデバイスがPTPから登録解除できない問題を修正します。

この製品は、IPv6 VXLANカプセル化解除が適切にサポートされていなかった問題を修正しました。

この製品は、順序外(OOS)パケットがドロップされる問題を修正します。

この製品は、フロー優先度レベル0 ～ 3が正しく処理されない問題を修正します。

この製品は、コアダンプサマリーを生成するときにコアダンプファイルデコーダーがクラッシュする問題を修正します。

]]>

This product has fixed the ETS validation issue to prevent traffic class (TC) starvation caused by incorrect bandwidth allocation.

This product fixes the issue where debugfs qp_info displays the UDP source port value incorrectly.

This product fixes the issue where the device fails to unregister from PTP during shutdown or suspend.

This product fixes the issue where IPv6 VXLAN decapsulation was not properly supported.

This product fixes the issue where out-of-sequence (OOS) packets were being dropped.

This product fixes the issue where flow priority levels 0–3 were not handled correctly.

This product fixes the issue where the coredump file decoder crashes when generating a coredump summary.

]]> TBD

]]> この製品は、Columbiaville 4.4のファームウェアとの互換性を強化しました。

]]> This product enhanced the compatibility with firmware of Columbiaville 4.4.

]]>

Driver update

]]>

Driver update

]]>

ドライバーアップデート

]]>

Driver update

]]>

Support new Gen12 servers.

]]>

Support new Gen12 servers.

]]>

Azure Stack HCI 23H2 OSをサポートします。

新しいGen12 サーバーをサポートします。

]]>

Support Azure Stack HCI 23H2 OS.

Support new Gen12 servers.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> 今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> 今回のリリースで解決した問題については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the issues resolved in this release.

]]> 今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> 今回のリリースで解決した問題については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the issues resolved in this release.

]]> なし

]]> None

]]> OSがFIPSモードの場合にrpmのインストールを有効にする

]]> Enabling rpm installation when OS is in FIPS mode

]]> なし

]]> None

]]> OSがFIPSモードの場合にrpmのインストールを有効にする

]]> Enabling rpm installation when OS is in FIPS mode

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]> This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.058.0 (2.20_03_03_2025) should be paired with System ROM 2.20_03-21-2025.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

Known Issues:

None]]> This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

]]> This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

Known Issues:

None]]>

Support Gen12 servers.

]]>

Support Gen12 servers.

]]> For Gen11 PR3 & 2023 March MSB

]]> Updated multi-language translation.

Added the help text for "Smooth Cooling" RBSU option.

]]> Updated multi-language translation.

Added the help text for "Smooth Cooling" RBSU option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel Catlow Refresh MR1 BKC. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Initial Build

]]> • REST および HPE iLO UIの前面のOCPAおよびOCPBラベルの名前をOCPスロット AおよびOCPスロット Bに変更しました。

• REST および HPE iLO UIの背面のOCPAおよびOCPBラベルの名前をOCPスロット AおよびOCPスロット Bに変更しました。

• HPE iLO Redfishがエアフィルターの交換に関する明確なイベント通知を発行する機能。

• Azure Stack HCI 23H2 OSのサポート。

• HPE ブランドガイドラインに準拠しました。

• HPE iLOにHPE Compute Ops Managementを含むHPE ProLiant Advancedライセンスの追加。

• 仮想メディアマウントのURLの長さのサポートが1023文字に増加しました。

]]> • Renamed the front OCPA and OCPB labeling in REST and HPE iLO UI to OCP Slot A and OCP Slot B.

• Renamed the rear OCPA and OCPB labeling in REST and HPE iLO UI to OCP Slot A and OCP Slot B.

• Ability of HPE iLO Redfish to raise a clear event notification for an air filter replacement.

• Support for Azure Stack HCI 23H2 OS.

• Adhered to HPE branding guidelines.

• Addition of HPE ProLiant Advanced License to HPE iLO with HPE Compute Ops Management.

• Support for the Virtual Media Mount URL length increased to 1023 characters.

]]> • VSPログバッファー処理のスタックオーバーフローが原因で、DL360 Gen11 HPE iLO6にVSP出力がない問題を修正しました。
• HPE ProLiant Compute DL384プラットフォームのメモリのヘルスステータスが低下しているように見える問題を修正しました。
• サーバーデバイスの検出が vMainDeviceDiscoveryCompleteに到達しないために、ファン速度が熱構成どおりに設定されない問題を修正しました。
• サブスクリプションに対してmTLSを有効にできず、クライアントの秘密キーの読み込み時にエラーが返される問題を修正しました。

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

このバージョンには、第4世代および第5世代Intel^® Xeon^®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

既知の問題点：

なし

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> バージョン14.4.473.7にアップデートしました

]]> Updated to version 14.4.473.7

]]> バージョン14.4.473.7にアップデートしました

]]> Updated to version 14.4.473.7

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

その他のログ機能とFW機能強化を追加します。

]]>

Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.

Adding other logging and FW enhancements.

]]> TBD

]]> 新しいプラットフォームのサポートを追加します。

]]> Add new support platform.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> 重要：セキュリティ強化の機能改善 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能改善が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのバージョンにアップグレードすることを推奨します。

バージョン16.35.4030には、以下の新機能と変更が含まれます。

特定の宛先に向けられたトラフィックのQPタイムアウト「再試行超過」エラーを延期するためのサポートが追加されました。この新しい機能により、ライブマイグレーションによるダウンタイム中に宛先への接続が切断されることが防止されます。

]]> Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

New features and changes included in version 16.35.4030:

Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.

]]> 以下の問題点がバージョン16.35.4030で修正されました。

VF FLRは、そのPFがFLRもトリガーするとスタックします。
ファームウェアがRoCEソースUDPポート制御の非PFドライバー構成 (SET_HCA_CAP.sw_r_roce_src_udp_portで設定) を無視したときに、RoCEパケットに予期しないソースUDPポートが表示されました。

]]> The following issues have been fixed in version 16.35.4030:

VF FLR would get stuck when its PF triggered the FLR as well.
Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).

バージョン16.35.4030には、以下の新機能と変更が含まれます。

特定の宛先に向けられたトラフィックのQPタイムアウト「再試行超過」エラーを延期するためのサポートが追加されました。この新しい機能により、ライブマイグレーションによるダウンタイム中に宛先への接続が切断されることが防止されます。

New features and changes included in version 16.35.4030:

Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.

]]> 以下の問題点がバージョン16.35.4030で修正されました。

VF FLRは、そのPFがFLRもトリガーするとスタックします。
ファームウェアがRoCEソースUDPポート制御の非PFドライバー構成 (SET_HCA_CAP.sw_r_roce_src_udp_portで設定) を無視したときに、RoCEパケットに予期しないソースUDPポートが表示されました。

]]> The following issues have been fixed in version 16.35.4030:

VF FLR would get stuck when its PF triggered the FLR as well.
Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added RHEL10 support

]]>

Added RHEL10 support

]]>

「pd all show detail」が使用される場合、物理ドライブの情報ページに書き込みキャッシュステータスフィールドが追加されました。

]]>

Added Write Cache Status field to the info page for physical drives when "pd all show detail" is used.

]]>

パリティ初期化メッセージの誤った表現を修正しました。

脆弱性CVE-2023-45853を修正しました。

]]>

Corrected wrong wording of Parity Initialization messages.

Fixed vulnerability CVE-2023-45853.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

以前のファームウェアバージョンHPK5では、修正不可能なマシンチェック例外 (UMCE) が発生する可能性があります。ファームウェアバージョンを少なくともHPK6へアップデートすることが推奨されます。

詳しくは、CAが後で次のURLで公開されます。https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_usを参照してください。

]]>

Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.

For more information, CA will published later at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

直接接続されたNVMeファームウェアのフラッシュの表示メッセージを修正し、OSによるFWアクティベーションの結果を揃えます。

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> バージョン1.0.0.0-4にアップデートしました

このコンポーネントはFIPSが有効になっています。

]]> Updated to version 1.0.0.0-4

This Component is FIPs enabled.

]]> このコンポーネントはFIPSが有効になっています。

]]> This Component is FIPs enabled.

]]> バージョン1.0.0.0-4にアップデートしました

このコンポーネントはFIPSが有効になっています。

]]> Updated to version 1.0.0.0-4

This Component is FIPs enabled.

]]> このコンポーネントはFIPSが有効になっています。

]]> This Component is FIPs enabled.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Added Support For:

Red Hat Enterprise Linux 10

Updated Driver version 10.02.14.00-k1

]]> Added Support For:

Red Hat Enterprise Linux 10

Updated Driver version 10.02.14.00-k1

]]>

Added support for Azure Stack HCI 23H2

]]>

Added support for Azure Stack HCI 23H2

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Microsoft Windows Server 2025のサポートを追加しました。

]]>

Added support for Microsoft Windows Server 2025.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

このバージョンには、第4世代および第5世代Intel^® Xeon^®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

既知の問題点：

なし

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> 今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

]]> See the iSUT Release Notes for information about the issues resolved in this release

]]> 今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

]]> See the iSUT Release Notes for information about the issues resolved in this release

]]> 今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

]]> See the iSUT Release Notes for information about the issues resolved in this release

]]> 今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

]]> See the iSUT Release Notes for information about the issues resolved in this release

]]> 7.30 Drop

]]>

最初のリリース

]]>

Initial release.

]]>

Updated Supported Environments

]]>

Updated Supported Environments

]]>

サポートされるプラットフォームをアップデートしました

]]>

Updated support platforms

]]> This Firmware package contains following firmware versions:

Adapter	Speed	Universal Boot Image	Firmware	UEFI	Boot Bios
HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0
HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0
HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter	64Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0
HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0

]]> This Firmware package contains following firmware versions:

Adapter	Speed	Universal Boot Image	Firmware	UEFI	Boot Bios
HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0
HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0
HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter	64Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0
HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0

]]> このファームウェアパッケージには、以下のファームウェアバージョンが含まれています。

アダプター	速度	Universal Boot Image	ファームウェア	UEFI	ブートBIOS
HPE SN1610E 32Gbシングルポートファイバーチャネルホストバスアダプター	32Gb	14.4.329.10	14.4.329.10	14.4.329.9	14.4.290.0
HPE SN1610E 32Gbデュアルポートファイバーチャネルホストバスアダプター	32Gb	14.4.329.10	14.4.329.10	14.4.329.9	14.4.290.0
HPE SN1700E 64Gbシングルポートファイバーチャネルホストバスアダプター	64Gb	14.4.329.10	14.4.329.10	14.4.329.9	14.4.290.0
HPE SN1700E 64Gbデュアルポートファイバーチャネルホストバスアダプター	64Gb	14.4.329.10	14.4.329.10	14.4.329.9	14.4.290.0

]]> This Firmware package contains following firmware versions:

Adapter	Speed	Universal Boot Image	Firmware	UEFI	Boot Bios
HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	14.4.329.10	14.4.329.10	14.4.329.9	14.4.290.0
HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	14.4.329.10	14.4.329.10	14.4.329.9	14.4.290.0
HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter	64Gb	14.4.329.10	14.4.329.10	14.4.329.9	14.4.290.0
HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	14.4.329.10	14.4.329.10	14.4.329.9	14.4.290.0

]]> Added support for:

Red Hat Enterprise Linux 10.0

Updated to version 14.4.473.25

]]> Added support for:

Red Hat Enterprise Linux 10.0

Updated to version 14.4.473.25

]]> バージョン14.4.466.0にアップデートしました

]]> Updated to version 14.4.466.0

]]>

Added Support for ESXi 9.0

]]>

Added Support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> New features and changes included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> New features and changes included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> The following issues have been fixed in version 28.44.1036:

Cable info semaphore deadlock.
Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.

]]> The following issues have been fixed in version 28.44.1036:

Cable info semaphore deadlock.
Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.

]]> バージョン28.43.1014には、以下の新機能と変更が含まれます。

PCIeテレメトリ (NSMタイプ2) のサポートが追加されました。
PCC NPソリューションをACEハードウェアプラットフォームからDPAハードウェアプラットフォームに移行しました。新しい機能は、次のモードに適用できます: 1) PCC_INT_EN=TrueかつPCC_INT_NP_RTT_DATA_MODE=INGRESS_BYTE 2) PCC_INT_EN=TrueかつPCC_INT_NP_RTT_DATA_MODE=NO_DATA。最初のモードは、RTT応答でZTRCC RXバイトをサポートするために使用されます。
eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。
拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

LAGにグループ化された複数のE-SwitchにわたるQoSスケジューリングのサポートが追加されました。ある物理機能のVPortメンバーを、別の物理機能からのレートグループに追加することができ、グループのレート制限はそれらのVPortメンバーにも適用されます。
ステアリングアクション (STC) の"Jump To Flow"テーブルパラメーターに'table_type_valid'および'table_type'フィールドが追加され、ユーザーがNIC_TXからFDB_TXにジャンプしてACLテーブルをバイパスできるようになりました。
さまざまなユースケースでNICドメインをバイパスすることでホップ削減を可能にしました。このようなアクションにより、大量のフローとデバイスを処理するためのホップ数が削減されます (PPSが向上します)。この新しい機能を有効にするために、テーブルのRX側にジャンプできるようにする新しいSTCアクションタイプ"JUMP_TO_FDB_RX"が追加されました。
動的フレックスパーサーでサポートされる"ARC-IN"の最大数を1から8に、"ARC-OUT"の最大数を3から8に増やしました。
PCC ZTR_RTTCにレートとラウンドトリップ時間 (RTT) のヒストグラムサポートが追加されました。
VF移行中にCQドアベルが失われた場合に備えて回復手順を追加しました。
VGAゲインとCTLEのためのPCIe Gen4/5の新しい静的構成を変更しました。
Gen4/5開始点のCTLEおよびVGAゲインを変更しました。
SPDMのRDT値を増加しました。

]]> New features and changes included in version 28.43.1014:

Added support for PCIe Telemetry (NSM Type 2).
Migrated PCC NP solution from ACE hardware platform to DPA hardware platform. The new capability is applicable to the following modes: 1) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=INGRESS_BYTE 2) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=NO_DATA. The first mode is used to support ZTRCC RX bytes in RTT response.
Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
Enabled hop reduction by bypassing NIC domain in various use cases. Such action reduces the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
Increased the maximum number of supported "ARC-IN" from 1 to 8 and "ARC-OUT" from 3 to 8 for the dynamic flex parser.
Added histogram support for rate and Round-Trip Time (RTT) in PCC ZTR_RTTC.
Added a recovery step in case of CQ doorbell getting lost during VF migration.
Changed PCIe Gen4/5 new static configuration for VGA gain and CTLE.
Changed the CTLE and VGA gain for Gen4/5 starting point.
Increased SPDM's RDT value.

]]> 以下の問題点がバージョン28.43.1014で修正されました：

アクティブなケーブルが接続されている場合にのみPLDMにポート温度センサーPDRが含まれている。
ポート速度が1Gまたは10Gに設定されている場合にPTPの精度が低下することがある。
動的MSIx機能が有効でvirtioエミュレーションが無効になっているときに、MSIx削減フローが誤った制限 (MSIxの合計数が誤って8kから4kに削減される) でトリガーされる。
光ファイバーケーブルを使用する場合、ロスレスパケットが400GB 4レーンでドロップする。
FACTORYデフォルトのNV構成値を照会するとき、ファームウェアは常に、適用される"次の"値を返す。
TP4設定の上書きに関連する問題。
まれに発生する証明書署名検証エラー。
マルチASICプラットフォームでモジュールを再挿入した後のケーブルリンクアッププロセスに誤りがある。
user_cc_enのデフォルト値 (mlxreg) が正しくない。

]]> The following issues have been fixed in version 28.43.1014:

PLDM included port temperature sensor PDR only if an active cable was connected.
PTP accuracy degradation occasionally occurred for port speed configured to 1G or 10G.
MSIx reduction flow was triggered with an incorrect limitation (the total number of MSIx is reduced from 8k to 4k by mistake) when the dynamic MSIx feature was enabled and virtio emulation was disabled.
Lossless packet drops at 400GB 4 lanes when using an optic fiber cable.
The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
An issue related to override TP4 settings.
A rare certificate signature verification error.
Erroneous cable linkup process after reinserting a module in multi ASIC platforms.
Incorrect user_cc_en default value (mlxreg).

]]> バージョン26.43.1014にアップグレードされました

]]> Upgraded to version 26.43.1014

]]> バージョン26.43.1014にアップグレードされました

]]> Upgraded to version 26.43.1014

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]>

This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

]]>

This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

]]>

このメンテナンスリビジョンにより、データの完全性が向上します。このファームウェアにアップグレードしない場合のリスクは、特定のエラーやタイミング条件でデータが破損する可能性が高まることです。

詳しくは、HPEカスタマーアドバイザリ: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00138902en_us（2024年4月24日に有効になります）を参照してください。

]]>

This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00138902en_us which will be active on 24-April-2024.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> ドライバーバージョン14.4.393.20にアップデートしました

rawドライバーファイルは、Smartコンポーネントを解凍し、その後Emulexインストーラーを解凍することによって取得することができます。次のコマンドを使用します。

elxdrvr-fc-version.exe /q2 extract=2

解凍されたファイルは次に置かれます。

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。例、

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019

]]> Updated to driver version 14.4.393.20

The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer. Use this command:

elxdrvr-fc-version.exe /q2 extract=2

The extracted files are located:

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

Each kit folder has subsequent architecture folders with subsequent OS folders. For example,

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019

]]> ドライバーバージョン14.4.393.20にアップデートしました

elxdrvr-fc-version.exe /q2 extract=2

解凍されたファイルは次に置かれます。

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。例、

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019

]]> Updated to driver version 14.4.393.20

The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer. Use this command:

elxdrvr-fc-version.exe /q2 extract=2

The extracted files are located:

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

Each kit folder has subsequent architecture folders with subsequent OS folders. For example,

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019

]]> このパッケージでは、Red Hat Enterprise Linux（RHEL）ディストリビューションのみがサポートされています

このコンポーネントはFIPSが有効になっています。

]]> This package supports only Red Hat Enterprise Linux (RHEL) Distros

This Component is FIPs enabled.

]]> このコンポーネントはFIPSが有効になっています。

]]> This Component is FIPs enabled.

]]> このパッケージでは、Red Hat Enterprise Linux（RHEL）ディストリビューションのみがサポートされています

このコンポーネントはFIPSが有効になっています。

]]> This package supports only Red Hat Enterprise Linux (RHEL) Distros

This Component is FIPs enabled.

]]> このコンポーネントはFIPSが有効になっています。

]]> This Component is FIPs enabled.

]]> SHA384 fix

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

このバージョンには、第4世代および第5世代Intel^® Xeon^®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

既知の問題点：

なし

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Restored the BIOS/Platform Configuration (RBSU) option called PCIe Device Configuration. This option can be used to enable and disable embedded NICs (Network Interface Cards) on DL320 Gen11.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Restored the BIOS/Platform Configuration (RBSU) option called PCIe Device Configuration. This option can be used to enable and disable embedded NICs (Network Interface Cards) on DL320 Gen11.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> TBD

]]> TBD

]]> この製品は、libfwupg を強化して、NVRAM構成のアップデートを改善します。

]]> This product enhances libfwupg to improve NVRAM configuration updates.

]]> この製品は、ファームウェアのアップデート後にMBA構成がデフォルトにリセットされる問題を修正しました。

]]> This product fixes where MBA configuration reset to defaults after updating firmware.

]]> This product fixes the kernel compilation issue.

]]> この製品は現在、新しいプラットフォームでサポートされています。

]]> This product is now supported on a new platform.

]]> Support new Gen12 servers.

]]> Gen10PおよびGen11サーバーの両方をサポートします

]]> Support both Gen10P and Gen11 servers

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

直接接続されたNVMeファームウェアのフラッシュの表示メッセージを修正し、OSによるFWアクティベーションの結果を揃えます。

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

このメンテナンスリビジョンにより、データの完全性が向上します。

このファームウェアにアップグレードしない場合のリスクは、特定のエラーやタイミング条件でデータが破損する可能性が高まることです。

]]>

This maintenance revision improves data integrity.

The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

]]> This product now supports Azure Stack HCI OS.

]]> この製品は、Columbiaville 4.5のファームウェアとの互換性を強化しました。

]]> This product enhanced the compatibility with firmware of Columbiaville 4.5.

]]>

この製品は、ICEAモジュールで警告メッセージイベントID：101 が表示される問題を修正します。

この製品は、E810物理アダプターがRDMAカウンターを表示しない問題を修正します。

]]>

This product correct an issue which seeing warning message Event ID : 101 with ICEA module.

This product correct an issue which E810 physical adapter does not display RDMA counters.

]]>

Fix FW assert and other regular fixes

]]>

Fix FW assert and other regular fixes

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Restored the BIOS/Platform Configuration (RBSU) option called PCIe Device Configuration. This option can be used to enable and disable embedded NICs (Network Interface Cards) on DL320 Gen11.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Restored the BIOS/Platform Configuration (RBSU) option called PCIe Device Configuration. This option can be used to enable and disable embedded NICs (Network Interface Cards) on DL320 Gen11.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]>

This is a planned maintenance release covering bug fixes. This firmware includes updates to improve PLI circuit reliability.

]]>

This is a planned maintenance release covering bug fixes. This firmware includes updates to improve PLI circuit reliability.

]]>

HPG3 is a planned maintenance release covering bug fixes for 2.5” and M.2. There are no critical functional updates, and risk is low for customers who do not upgrade, especially if drives are not stored without power for a long period of time (~2 years).

]]>

このFWPKGからROMフラッシュウェイを削除します。

]]>

Remove ROM flash way from this FWPKG.

]]>

ランダム読み取り/書き込みパフォーマンスを向上します。

]]>

Improve random read/write perfomance.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

このバージョンには、第4世代および第5世代Intel^® Xeon^®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

既知の問題点：

なし

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> This product enhanced the compatibility with the latest drivers.

]]>

この製品は、最新のドライバーとの互換性を強化しました。

]]>

This product enhanced the compatibility with the latest drivers.

]]> Added Support For:

Red Hat Enterprise Linux 10

Updated Driver version 10.02.14.00-k1

]]> Added Support For:

Red Hat Enterprise Linux 10

Updated Driver version 10.02.14.00-k1

]]> ドライバーをバージョン10.02.13.03-k1にアップデートしました

]]> Updated Driver version 10.02.13.03-k1

]]>

fix for genericmsi version

]]>

fix for genericmsi version

]]>

「pd all show detail」が使用される場合、物理ドライブの情報ページに書き込みキャッシュステータスフィールドが追加されました。

]]>

Added Write Cache Status field to the info page for physical drives when "pd all show detail" is used.

]]>

パリティ初期化メッセージの誤った表現を修正しました。

脆弱性CVE-2023-45853を修正しました。

]]>

Corrected wrong wording of Parity Initialization messages.

Fixed vulnerability CVE-2023-45853.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

直接接続されたNVMeファームウェアのフラッシュの表示メッセージを修正し、OSによるFWアクティベーションの結果を揃えます。

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

以前のファームウェアからの修正を導入するためのメンテナンスファームウェアリリース。

コントローラーライブラリの互換性の問題を修正しました。

]]>

Maintenance firmware release to introduce fixes from previous firmware.

Fix the controller library compatible issue.

]]> Added Support For:

Red Hat Enterprise Linux 10

Updated Driver version 10.02.14.00-k1

]]> Added Support For:

Red Hat Enterprise Linux 10

Updated Driver version 10.02.14.00-k1

]]> ドライバーをバージョン10.02.13.03-k1にアップデートしました

]]> Updated Driver version 10.02.13.03-k1

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

Assertの修正、現在のファームウェアの改善、およびバグ修正を修正します。

]]>

Fix to Assert fixes, current firmware improvements and bug fixes.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> TBD

]]> TBD

]]> この製品は、ファームウェアの機能に基づいてRDMAフラグのアップデートを有効にすることで、RDMA機能を強化します。

]]> This product enhances RDMA functionality by enabling the RDMA flag update based on firmware capability.

]]>

この製品は、ダイナミック割り込みモデレーションが適切にシャットダウンできない問題を修正します。

この製品は、コアダンプファイルを生成するときにコアダンプファイルデコーダーがクラッシュする問題を修正します。

]]>

This product fixes the issue where Dynamic Interrupt Moderation fails to shut down properly.

This product fixes the issue where the coredump file decoder crashes when generating the summary of a coredump file.

]]> TBD

]]> この製品は、libfwupg を強化して、NVRAM構成のアップデートを改善します。

]]> This product enhances libfwupg to improve NVRAM configuration updates.

]]> この製品は、ファームウェアのアップデート後にMBA構成がデフォルトにリセットされる問題を修正しました。

]]> This product fixes where MBA configuration reset to defaults after updating firmware.

]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Important Notes:

This revision of the System ROM includes AMD reference code TurinPI 1.0.0.5 for AMD 5th Generation EPYC processors. This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Added help text for "Smooth Cooling" RBSU option.

Added the System Configuration (RBSU) option "PCIe Device Configuration/Advanced PCIe Configuration/PCIe Hot-Plug Error Control" and set to "Hot-Plug Surprise" by default. This setting has the following Redfish property:

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Added help text for "Smooth Cooling" RBSU option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Important Notes:

This revision of the System ROM includes AMD reference code TurinPI 1.0.0.4 for AMD 5th Generation EPYC processors. This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.E for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Restored the BIOS/Platform Configuration (RBSU) option called PCIe Device Configuration. This option can be used to enable and disable embedded NICs (Network Interface Cards) on DL320 Gen11.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Restored the BIOS/Platform Configuration (RBSU) option called PCIe Device Configuration. This option can be used to enable and disable embedded NICs (Network Interface Cards) on DL320 Gen11.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

New features and changes included in version 22.44.1036:

Unified PTP is now supported across different VFs on the same PF.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

New features and changes included in version 22.44.1036:

Unified PTP is now supported across different VFs on the same PF.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> The following issues have been fixed in version 22.44.1036:

Traffic would halt and recovery would be prevented when the emulation doorbell malfunctioned.

]]> The following issues have been fixed in version 22.44.1036:

Traffic would halt and recovery would be prevented when the emulation doorbell malfunctioned.

]]> セキュリティ強化の機能改善 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能改善が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨します。

バージョン22.43.1014には、以下の新機能と変更が含まれます。

VF移行中にCQドアベルが失われた場合に備えて回復手順を追加しました。
eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。この機能は、新しい一般オブジェクトであるRDMA-Telemetryオブジェクトを使用して構成され、次の新しいキャップに依存します。

HCA_CAP.rdma_telemetry_notification_typesおよびHCA_CAP.rdma_telemetry。

拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

ステアリングアクション (STC) の"Jump To Flow"テーブルパラメーターに'table_type_valid'および'table_type'フィールドが追加され、ユーザーがNIC_TXからFDB_TXにジャンプしてACLテーブルをバイパスできるようになりました。
さまざまなユースケースでNICドメインをバイパスすることでホップ削減を可能にしました。このようなアクションにより、大量のフローとデバイスを処理するためのホップ数が削減されます (PPSが向上します)。この新しい機能を有効にするために、テーブルのRX側にジャンプできるようにする新しいSTCアクションタイプ"JUMP_TO_FDB_RX"が追加されました。
LAGにグループ化された複数のE-SwitchにわたるQoSスケジューリングのサポートが追加されました。ある物理機能のVPortメンバーを、別の物理機能からのレートグループに追加することができ、グループのレート制限はそれらのVPortメンバーにも適用されます。
動的フレックスパーサーでサポートされる"ARC-IN"の最大数を1から8に、"ARC-OUT"の最大数を3から8に増やしました。

New features and changes included in version 22.43.1014:

Added a recovery step in case of CQ doorbell getting lost during VF migration.
Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.). The feature is configured using a new general object: RDMA-Telemetry object, and depends on the following new caps:

HCA_CAP.rdma_telemetry_notification_types and HCA_CAP.rdma_telemetry .

Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
Enabled hop reduction by bypassing NIC domain in various use cases. Such action reduces the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
Increased the maximum number of supported "ARC-IN" from 1 to 8 and "ARCOUT" from 3 to 8 for the dynamic flex parser.

]]> 以下の問題点がバージョン22.43.1014で修正されました：

create_sqが無効なmboxを使用した場合、セットアップがクラッシュする。これで、無効なmboxが有効なDBに置き換えられました。
ファームウェアをv22.33.0428以下から22.36.1010以上のバージョンにアップグレードするときに、中間バージョンとしてファームウェアv22.36.1010が必要になるアップグレードの問題。
FACTORYのデフォルトのNV構成値のクエリを修正しました。ファームウェアは常に適用される「次」値を返しました。

]]> The following issues have been fixed in version 22.43.1014:

Setup crash would occur when create_sq used invalid mbox. Now the invalid mbox is replaced with a valid DB.
An upgrade issue that required firmware v22.36.1010 as an intermediate version when upgrading the firmware from v22.33.0428 or below to versions above 22.36.1010.
Fixed the query for FACTORY default NV configuration values. The firmware always returned the "next" value to be applied.

New features and changes included in version 26.44.1036:

Enabled the get_pf_mac_address function for all available PFs.
Enhanced traffic management of PTP packets to reduce their impact on regular network traffic.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

New features and changes included in version 26.44.1036:

Enabled the get_pf_mac_address function for all available PFs.
Enhanced traffic management of PTP packets to reduce their impact on regular network traffic.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> The following issues have been fixed in version 26.44.1036:

A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

]]> The following issues have been fixed in version 26.44.1036:

A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

バージョン26.43.1014には、以下の新機能と変更が含まれます。

VF移行中にCQドアベルが失われた場合に備えて回復手順を追加しました。
eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。この機能は、新しい一般オブジェクトであるRDMA-Telemetryオブジェクトを使用して構成され、次の新しいキャップに依存します。

HCA_CAP.rdma_telemetry_notification_typesおよびHCA_CAP.rdma_telemetry。

拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

ステアリングアクション (STC) の"Jump To Flow"テーブルパラメーターに'table_type_valid'および'table_type'フィールドが追加され、ユーザーがNIC_TXからFDB_TXにジャンプしてACLテーブルをバイパスできるようになりました。
さまざまなユースケースでNICドメインをバイパスすることでホップ削減を可能にしました。このようなアクションにより、大量のフローとデバイスを処理するためのホップ数が削減されます (PPSが向上します)。この新しい機能を有効にするために、テーブルのRX側にジャンプできるようにする新しいSTCアクションタイプ"JUMP_TO_FDB_RX"が追加されました。

New features and changes included in version 26.43.1014:

Added a recovery step in case of CQ doorbell getting lost during VF migration.
Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.). The feature is configured using a new general object: RDMA-Telemetry object, and depends on the following new caps:

HCA_CAP.rdma_telemetry_notification_types and HCA_CAP.rdma_telemetry.

Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
Enabled hop reduction by bypassing NIC domain in various use cases. Such action r educes the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.

]]> 以下の問題点がバージョン26.43.1014で修正されました：

create_sqが無効なmboxを使用した場合、セットアップがクラッシュする。これで、無効なmboxが有効なDBに置き換えられました。
FACTORYのデフォルトのNV構成値のクエリを修正しました。ファームウェアは常に適用される「次」値を返しました。

]]> The following issues have been fixed in version 26.43.1014:

Setup crash would occur when create_sq used invalid mbox. Now the invalid mbox is replaced with a valid DB.
Fixed the query for FACTORY default NV configuration values. The firmware always returned the "next" value to be applied.

]]> No changes or new features have been included in version 20.43.2026.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

バージョン20.43.1014には、以下の新機能と変更が含まれます。

eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。
拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

New features and changes included in version 20.43.1014:

Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

]]> 以下の問題点がバージョン20.43.1014で修正されました：

"create_sq"が無効なmboxを使用した場合、セットアップがクラッシュする。
FACTORYデフォルトのNV構成値を照会するとき、ファームウェアは常に、適用される"次の"値を返す。

]]> The following issues have been fixed in version 20.43.1014:

Setup crash when "create_sq" used invalid mbox.
The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> ドライバーバージョン14.4.393.20にアップデートしました

elxdrvr-fc-version.exe /q2 extract=2

解凍されたファイルは次に置かれます。

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。例、

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]> Updated to driver version 14.4.393.20

The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer. Use this command:

elxdrvr-fc-version.exe /q2 extract=2

The extracted files are located:

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

Each kit folder has subsequent architecture folders with subsequent OS folders. For example,

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]> ドライバーバージョン14.4.393.20にアップデートしました

elxdrvr-fc-version.exe /q2 extract=2

解凍されたファイルは次に置かれます。

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。例、

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]> Updated to driver version 14.4.393.20

The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer. Use this command:

elxdrvr-fc-version.exe /q2 extract=2

The extracted files are located:

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

Each kit folder has subsequent architecture folders with subsequent OS folders. For example,

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Fixes Maximum Temperature Reporting in system log.

]]>

Fixes Maximum Temperature Reporting in system log.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for RHEL10.

]]>

Added support for RHEL10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

このバージョンには、第4世代および第5世代Intel^® Xeon^®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

既知の問題点：

なし

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> Features included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added support for SyncE at 1G link speed.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> Features included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added support for SyncE at 1G link speed.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> Initial version.

]]>

This is a maintenance release that contains code improvements for CAP.TO and LED behavior.

]]>

This is a maintenance release that contains code improvements for CAP.TO and LED behavior.

]]> これは初期FWです。

]]> This is an initial FW.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

このFWPKGからROMフラッシュウェイを削除します。

]]>

Remove ROM flash way from this FWPKG.

]]> It has fix code for V6 read disturb and other issues

]]> Added back dynamic power capping support for B200.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Swaped PCIe Slot 7 and Slot 8 identifiers.

Fixed SMBIOS to support 12 power supplies.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Swaped PCIe Slot 7 and Slot 8 identifiers.

Fixed SMBIOS to support 12 power supplies.

Known Issues:

None]]> Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

Removed dynamic power capping support for this release. It is not supported for now.

Enabled Spread Spectrum.

Known Issues:

None]]> Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

Removed dynamic power capping support for this release. It is not supported for now.

Enabled Spread Spectrum.

Known Issues:

None]]>

This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.

]]>

This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.

]]> ドライバーバージョン14.4.393.20にアップデートしました

elxdrvr-fc-version.exe /q2 extract=2

解凍されたファイルは次に置かれます。

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。例、

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]> Updated to driver version 14.4.393.20

The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer. Use this command:

elxdrvr-fc-version.exe /q2 extract=2

The extracted files are located:

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

Each kit folder has subsequent architecture folders with subsequent OS folders. For example,

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]> ドライバーバージョン14.4.393.20にアップデートしました

elxdrvr-fc-version.exe /q2 extract=2

解凍されたファイルは次に置かれます。

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。例、

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]> Updated to driver version 14.4.393.20

The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer. Use this command:

elxdrvr-fc-version.exe /q2 extract=2

The extracted files are located:

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

Each kit folder has subsequent architecture folders with subsequent OS folders. For example,

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]> Added back dynamic power capping support for B200.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Swaped PCIe Slot 7 and Slot 8 identifiers.

Fixed SMBIOS to support 12 power supplies.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Swaped PCIe Slot 7 and Slot 8 identifiers.

Fixed SMBIOS to support 12 power supplies.

Known Issues:

None]]> Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

Removed dynamic power capping support for this release. It is not supported for now.

Enabled Spread Spectrum.

Known Issues:

None]]> Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

Removed dynamic power capping support for this release. It is not supported for now.

Enabled Spread Spectrum.

Known Issues:

None]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> The following fixes were incorporated in this version:

The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.
The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.
Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.
If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]> The following fixes were incorporated in this version:

The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.
The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.
Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.
If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]> TBD

]]> この製品は、libfwupg を強化して、NVRAM構成のアップデートを改善します。

]]> This product enhances libfwupg to improve NVRAM configuration updates.

]]> この製品は、ファームウェアのアップデート後にMBA構成がデフォルトにリセットされる問題を修正しました。

]]> This product fixes where MBA configuration reset to defaults after updating firmware.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

以前のファームウェアからの修正を導入するためのメンテナンスファームウェアリリース。

コントローラーライブラリの互換性の問題を修正しました。

]]>

Maintenance firmware release to introduce fixes from previous firmware.

Fix the controller library compatible issue.

]]>

This firmware provides bug fixes for the P5620/P5520.

]]>

This firmware provides bug fixes for the P5620/P5520.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> TBD

]]> No changes or new features have been included in version 20.43.2026.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

バージョン20.43.1014には、以下の新機能と変更が含まれます。

eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。
拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

New features and changes included in version 20.43.1014:

Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

]]> 以下の問題点がバージョン20.43.1014で修正されました：

"create_sq"が無効なmboxを使用した場合、セットアップがクラッシュする。
FACTORYデフォルトのNV構成値を照会するとき、ファームウェアは常に、適用される"次の"値を返す。

]]> The following issues have been fixed in version 20.43.1014:

Setup crash when "create_sq" used invalid mbox.
The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.

]]> This product fixes to align DDP with the new FW version and NVM 4.71.

]]> この製品は現在、新しいプラットフォームでサポートされています。

]]> This product is now supported on a new platform.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> 重要な注意：

なし

ファームウェアの依存関係:

なし

機能強化/新しい機能：

これは、このファームウェアでの最初のバージョンです。

既知の問題点：

なし

]]> Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial verison of the firmware.

Known Issues:

None

]]> TBD

]]>

この製品は、NXEファミリデバイスの一貫したPTPクロックのレポートを強化します。

この製品は、必要なPNP IDを追加することでデバイスの互換性を強化します。

]]>

This product enhances the reporting of a consistent PTP clock for NXE family devices.

This product enhances device compatibility by adding the necessary PNP ID.

]]> この製品は、未使用のrelease.txtファイルが削除されない問題を修正します。

]]> This product fixes the issue where an unused release.txt file was not removed.

]]> The following new features and changes have been included in version 25.01-0.6.0.1

[ConnectX-7] Multi-host LAG: When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Hardware GRO: Hardware Generic Receive Offload (GRO) reduces CPU overhead and improves throughput by offloading the task of reassembling incoming network packets from the CPU.
Precision Time Measurement (PTM): Precision Time Measurement (PTM) enhances clock synchronization accuracy between the NIC's hardware clock and the system's host clock. It addresses inaccuracies caused by asymmetric PCIe request and response times, which can affect PTP.
Transport RDMA Steering Domain: Transport RDMA steering domain in the kernel allows users to create steering tables and rules using the new domain types FS_FT_RDMA_TRANSPORT_RX and FS_FT_RDMA_TRANSPORT_TX, with support for both DevX commands and the added functionality in mlx5dv_create_flow_matcher().
DevX QPs Parallel Cleanup: Reduces cleanup (kill) time of user-space applications that use DevX QPs, without requiring any changes on the user's end. When using a kernel that includes this patch, DevX QP destruction upon cleanup will be sent to the firmware in parallel, rather than serially as before, resulting in faster cleanup times. The more DevX QPs the application has, the more noticeable the improvement will be.
Flow Control for Solicited MADs: Implements flow control for solicited MADs in the MAD layer to prevent loss due to insufficient resources at the receiver. Both the client and server function as receivers: the server handles incoming requests, while the client receives the responses.
Increased the default TX queue length in IPoIB to enhance qdisc queueing and reduce CPU spikes.
The "--defltprio" flag has been deprecated and removed from the mlnx_qos tool.

]]> The following new features and changes have been included in version 25.01-0.6.0.1

[ConnectX-7] Multi-host LAG: When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Hardware GRO: Hardware Generic Receive Offload (GRO) reduces CPU overhead and improves throughput by offloading the task of reassembling incoming network packets from the CPU.
Precision Time Measurement (PTM): Precision Time Measurement (PTM) enhances clock synchronization accuracy between the NIC's hardware clock and the system's host clock. It addresses inaccuracies caused by asymmetric PCIe request and response times, which can affect PTP.
Transport RDMA Steering Domain: Transport RDMA steering domain in the kernel allows users to create steering tables and rules using the new domain types FS_FT_RDMA_TRANSPORT_RX and FS_FT_RDMA_TRANSPORT_TX, with support for both DevX commands and the added functionality in mlx5dv_create_flow_matcher().
DevX QPs Parallel Cleanup: Reduces cleanup (kill) time of user-space applications that use DevX QPs, without requiring any changes on the user's end. When using a kernel that includes this patch, DevX QP destruction upon cleanup will be sent to the firmware in parallel, rather than serially as before, resulting in faster cleanup times. The more DevX QPs the application has, the more noticeable the improvement will be.
Flow Control for Solicited MADs: Implements flow control for solicited MADs in the MAD layer to prevent loss due to insufficient resources at the receiver. Both the client and server function as receivers: the server handles incoming requests, while the client receives the responses.
Increased the default TX queue length in IPoIB to enhance qdisc queueing and reduce CPU spikes.
The "--defltprio" flag has been deprecated and removed from the mlnx_qos tool.

]]> The following issues have been fixed in version 25.01-0.6.0.1:

Incorrect SA switching when multiple active TX SAs are created on a SC, caused by failing to respect the SA configured by "encoding_sa".
Incorrect receive queue cache size calculation.

]]> The following issues have been fixed in version 25.01-0.6.0.1:

Incorrect SA switching when multiple active TX SAs are created on a SC, caused by failing to respect the SA configured by "encoding_sa".
Incorrect receive queue cache size calculation.

]]> バージョン24.10-1.1.4.1には、次の新機能と変更が含まれています。

コミュニティで承認されたホットリセットカーネルフローを活用したSync1のファームウェアリセットフローが強化されました。

]]> The following new features and changes have been included in version 24.10-1.1.4.1:

Enhanced firmware reset flow for Sync1 utilizing community-accepted hot reset kernel flow.

]]> 以下の問題点がバージョン24.10-1.1.4.1で修正されました。

rte_eth_dev_start() はmlx5制御フロールールの不要な再作成を実行し、その結果 rte_eth_dev_start() の遅延が増加しました。
Fireflyは、ConnectX7 FHHLアダプターカードを使用している間、「SyncEから 1ppsクラスB/C過渡応答」に準拠していませんでした。

]]> The following issues have been fixed in version 24.10-1.1.4.1:

rte_eth_dev_start() performed unnecessary recreation of mlx5 control flow rules, resulting in increased delay of rte_eth_dev_start().
Firefly was not compliant with "SyncE to 1pps Class B/C Transient response" while using ConnectX7 FHHL adapter card.

]]> バージョン9.4.11.20にアップデートしました

]]> Updated to version 9.4.11.20

]]> バージョン9.4.11.20にアップデートしました

]]> Updated to version 9.4.11.20

New features and changes included in version 16.35.4506:

Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.

New features and changes included in version 16.35.4506:

Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.

]]> The following issues have been fixed in version 16.35.4506:

Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.

]]> The following issues have been fixed in version 16.35.4506:

Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.

バージョン16.35.4030には、以下の新機能と変更が含まれます。

特定の宛先に向けられたトラフィックのQPタイムアウト「再試行超過」エラーを延期するためのサポートが追加されました。この新しい機能により、ライブマイグレーションによるダウンタイム中に宛先への接続が切断されることが防止されます。

New features and changes included in version 16.35.4030:

Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.

]]> 以下の問題点がバージョン16.35.4030で修正されました。

VF FLRは、そのPFがFLRもトリガーするとスタックします。
ファームウェアがRoCEソースUDPポート制御の非PFドライバー構成 (SET_HCA_CAP.sw_r_roce_src_udp_portで設定) を無視したときに、RoCEパケットに予期しないソースUDPポートが表示されました。

]]> The following issues have been fixed in version 16.35.4030:

VF FLR would get stuck when its PF triggered the FLR as well.
Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).

]]> For 2025 Jan SPP.

]]>

showコマンドのNVMeドライブヘルスログの出力形式を改善します。

]]>

To improve the output format of the NVMe drive health log for the show command.

]]>

VMware ESXi 8.0 U2でesxcli経由ですべてのコントローラーが表示されない問題を修正しました。

VMware ESXi 8.0 U2で、構成の作成と削除、およびその他の変更操作が機能しない問題を修正しました。

障害が発生したドライブの詳細が「show config」出力に複数回表示される問題を修正しました。

「drive」パラメーターと「drivetype」パラメーターが共存している場合に、modifyコマンドがエラーをスローしたときにSSACLIに表示される誤ったエラーメッセージを修正しました。

drives=all および drivetype=sata_hdd パラメーターを使用してアレイ作成コマンドを実行すると失敗する問題を修正しました。

エンクロージャの背後にあるドライブがSSACLI出力に表示されない問題を修正しました。

PrebootHealthReportingでサポートされていないパラメーターを使用してRAID構成を復元するためにSSASCRIPTINGツールを起動するとエラーが発生する問題を修正しました。

]]>

Fixed an issue on VMware ESXi 8.0 U2 where not all controllers were shown via esxcli.

Fixed an issue on VMware ESXi 8.0 U2 where the create and delete config, as well as other modify operations, were not working.

Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.

Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.

Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.

Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.

Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.

]]> Added Azure Stack HCI 23H2 support

]]> 新しいOS Microsoft Windows Server 2025のサポート。

]]> Support new OS Microsoft Windows Server 2025.

]]>

Added support for RHEL10.

]]>

Added support for RHEL10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> TBD

]]>

この製品は、nicclilomのインストール場所を正しいパスにアップデートするように強化されています。

この製品は、NETDEV_CHANGEイベントが発生したときにDCB設定を照会することで機能を強化します。

]]>

This product enhances to update the installation location for nicclilom to the correct path.

This product enhances functionality by querying DCB settings when the NETDEV_CHANGE event occurs.

]]>

この製品では、不正な帯域幅割り当てによるトラフィッククラス(TC)の枯渇を防ぐために、ETS検証の問題を修正しました。

この製品は、debugfs qp_infoがUDP送信元ポート値を正しく表示しない問題を修正します。

この製品は、シャットダウンまたはサスペンド中にデバイスがPTPから登録解除できない問題を修正します。

この製品は、IPv6 VXLANカプセル化解除が適切にサポートされていなかった問題を修正しました。

この製品は、順序外(OOS)パケットがドロップされる問題を修正します。

この製品は、フロー優先度レベル0 ～ 3が正しく処理されない問題を修正します。

この製品は、コアダンプサマリーを生成するときにコアダンプファイルデコーダーがクラッシュする問題を修正します。

]]>

This product has fixed the ETS validation issue to prevent traffic class (TC) starvation caused by incorrect bandwidth allocation.

This product fixes the issue where debugfs qp_info displays the UDP source port value incorrectly.

This product fixes the issue where the device fails to unregister from PTP during shutdown or suspend.

This product fixes the issue where IPv6 VXLAN decapsulation was not properly supported.

This product fixes the issue where out-of-sequence (OOS) packets were being dropped.

This product fixes the issue where flow priority levels 0–3 were not handled correctly.

This product fixes the issue where the coredump file decoder crashes when generating a coredump summary.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Updated Driver version 10.02.13.03-k1

]]> 以下のサポートを追加しました。

Red Hat Enterprise Linux 9.5

ドライバーをバージョン10.02.12.01-k1にアップデートしました

]]> Added support for:

Red Hat Enterprise Linux 9.5

Updated Driver version 10.02.12.01-k1

]]> Added support for:

Red Hat Enterprise Linux 10.0

Updated to version 14.4.473.24

]]> Added support for:

Red Hat Enterprise Linux 10.0

Updated to version 14.4.473.24

]]> バージョン14.4.473.7にアップデートしました

]]> Updated to version 14.4.473.7

]]> VMware ESXi 9.0 をサポートします

]]> Support VMware ESXi 9.0.

]]> Fix 1) PCIe link length drop in AMD x2 system configuration
2) Drive detection after hot re-insert on Windows
3) Other regular FW patch release.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Updated Supported Device

Updated SBOM requirement

]]>

Updated Supported Device

Updated SBOM requirement

]]> 最初のリリース

]]> Initial release.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> This product fixes an issue where the ice driver failed to load when the transmit balancing feature was enabled in the NIC HII menu.

]]> この製品は現在、新しいプラットフォームでサポートされています。

]]> This product is now supported on a new platform.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

サポート環境をアップデートしました

]]>

Updated Supported Environments

]]>

アップデートされたドライバー

サポートされるプラットフォームをアップデートしました

]]>

Updated driver

Updated supported platforms

]]> TBD

]]>

ホストシステムからファームウェアに割り当てられたメモリページ数 (4 KB) を表示する新しいカウンター"Allocated Memory Pages"を追加しました。

MlxNdPerfは複数のQPを使用した帯域幅テストをサポートするようになりました。

DevXインターフェイスでの動的ステアリングルール挿入のサポートが追加されました。

]]>

Added a new counter "Allocated Memory Pages" to show the number of memory pages (4KB) allocated to the firmware from the host system.

MlxNdPerf now supports bandwidth tests with multiple QPs.

Added support for dynamic steering rule insertion in DevX interface.

]]>

この製品では、複数のアダプターから同じVMにVFを割り当て、カウンターを照会し、1 つのアダプターからすべてのVFを削除すると、VF診断カウンターが表示されないという問題が修正されました。

この製品は、ポーリングによって間違ったリクエストコンテキストが返されるまれなケースを修正しました。

]]>

This product fixed an issue that prevented the VF diagnostic counters from being shown when assigned a VF from multiple adapters to the same VM, queried for counters and removed all VFs from one adapter.

This product fixed a rare case when polling returns wrong request context.

]]> Allowed to update chassis controller firmware when iLO security mode is set to CNSA

]]> - HPE Compute Edge Server e930tのサポートを追加

]]> - Added support for HPE Compute Edge Server e930t

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> TBD

]]>

ホストシステムからファームウェアに割り当てられたメモリページ数 (4 KB) を表示する新しいカウンター"Allocated Memory Pages"を追加しました。

MlxNdPerfは複数のQPを使用した帯域幅テストをサポートするようになりました。

DevXインターフェイスでの動的ステアリングルール挿入のサポートが追加されました。

]]>

Added a new counter "Allocated Memory Pages" to show the number of memory pages (4KB) allocated to the firmware from the host system.

MlxNdPerf now supports bandwidth tests with multiple QPs.

Added support for dynamic steering rule insertion in DevX interface.

]]>

この製品は、ポーリングによって間違ったリクエストコンテキストが返されるまれなケースを修正しました。

]]>

This product fixed a rare case when polling returns wrong request context.

]]> SHA384 fix

]]> - HPE Compute Edge Server e930tのサポートを追加

]]> - Added support for HPE Compute Edge Server e930t

]]> Initial version.

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]> Add new support platform.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

Firmware maintenance release of Samsung M.2 NVMe SSD with HPK3

]]>

Firmware maintenance release of Samsung M.2 NVMe SSD with HPK3

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

New features and changes included in version 26.44.1036:

Enabled the get_pf_mac_address function for all available PFs.
Enhanced traffic management of PTP packets to reduce their impact on regular network traffic.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

New features and changes included in version 26.44.1036:

Enabled the get_pf_mac_address function for all available PFs.
Enhanced traffic management of PTP packets to reduce their impact on regular network traffic.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> The following issues have been fixed in version 26.44.1036:

A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

]]> The following issues have been fixed in version 26.44.1036:

A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

バージョン26.43.1014には、以下の新機能と変更が含まれます。

VF移行中にCQドアベルが失われた場合に備えて回復手順を追加しました。
eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。この機能は、新しい一般オブジェクトであるRDMA-Telemetryオブジェクトを使用して構成され、次の新しいキャップに依存します。

HCA_CAP.rdma_telemetry_notification_typesおよびHCA_CAP.rdma_telemetry。

拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

ステアリングアクション (STC) の"Jump To Flow"テーブルパラメーターに'table_type_valid'および'table_type'フィールドが追加され、ユーザーがNIC_TXからFDB_TXにジャンプしてACLテーブルをバイパスできるようになりました。
さまざまなユースケースでNICドメインをバイパスすることでホップ削減を可能にしました。このようなアクションにより、大量のフローとデバイスを処理するためのホップ数が削減されます (PPSが向上します)。この新しい機能を有効にするために、テーブルのRX側にジャンプできるようにする新しいSTCアクションタイプ"JUMP_TO_FDB_RX"が追加されました。

New features and changes included in version 26.43.1014:

Added a recovery step in case of CQ doorbell getting lost during VF migration.
Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.). The feature is configured using a new general object: RDMA-Telemetry object, and depends on the following new caps:

HCA_CAP.rdma_telemetry_notification_types and HCA_CAP.rdma_telemetry.

Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
Enabled hop reduction by bypassing NIC domain in various use cases. Such action r educes the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.

]]> 以下の問題点がバージョン26.43.1014で修正されました：

create_sqが無効なmboxを使用した場合、セットアップがクラッシュする。これで、無効なmboxが有効なDBに置き換えられました。
FACTORYのデフォルトのNV構成値のクエリを修正しました。ファームウェアは常に適用される「次」値を返しました。

]]> The following issues have been fixed in version 26.43.1014:

Setup crash would occur when create_sq used invalid mbox. Now the invalid mbox is replaced with a valid DB.
Fixed the query for FACTORY default NV configuration values. The firmware always returned the "next" value to be applied.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> バージョン9.4.11.20にアップデートしました

]]> Updated to version 9.4.11.20

]]> バージョン9.4.10.20にアップデートしました

]]> Updated to version 9.4.10.20

]]> 7.30 Beta Drop

]]>

Add "IO is completed, no reset is required" kernel message when the pending SCSI IO get completed before issuing the reset

]]>

Add "IO is completed, no reset is required" kernel message when the pending SCSI IO get completed before issuing the reset

]]>

Fix an issue that Doorbell, Host diagnostic and Scratchpad registers could return 0.

]]>

Fix an issue that Doorbell, Host diagnostic and Scratchpad registers could return 0.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

このバージョンには、第4世代および第5世代Intel^® Xeon^®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

既知の問題点：

なし

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

以前のファームウェアからの修正を導入するためのメンテナンスファームウェアリリース。

]]>

Maintenance firmware release to introduce fixes from previous firmware.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Latest FW ver 4.22

]]> バージョン22.43.1014にアップグレードされました

]]> Upgraded to version 22.43.1014

]]> バージョン22.43.1014にアップグレードされました

]]> Upgraded to version 22.43.1014

]]> Added Support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> Added Support for RHEL 10

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

Added fix to address a rare case where drive health queries can trigger false drive predictive failure.

For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00146367en_us which will be active on 19-Mar-2025.

]]>

Added fix to address a rare case where drive health queries can trigger false drive predictive failure.

For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00146367en_us which will be active on 19-Mar-2025.

]]>

このFWPKGからROMフラッシュウェイを削除します。

]]>

Remove ROM flash way from this FWPKG.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

特定のCPU温度エラーによって引き起こされる潜在的なシステムシャットダウンを防ぐための機能強化を導入しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> For 2025 Mar SPP.

]]> For 2025 Mar SPP.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

このコンポーネントは、VMD対応Intel VROCプラットフォームのサポートのみを提供します。

]]>

This component provides support only for VMD enabled Intel VROC platform.

]]>

詳しくは、CAが次のURLで公開されています。https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us

]]>

Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.

For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> SR 2.9.2/SR 3.4.2

]]>

アレイ削除操作中にPSODが発生する問題を修正しました。

障害が発生した論理ボリュームを OS レベルで削除するのに時間がかかりすぎる問題を修正しました。

ホットプラグ操作後にNVMeドライブが検出されない問題を修正しました。

シャットダウン中にWriteBackモードで構成されたSmartCache論理ドライブで発生する可能性のあるデータ損失のリスクを修正しました。

]]>

Fixed an issue where a PSOD occurred during array delete operations.

Fixed an issue where failed logical volumes take too long to be removed at the OS level.

Fixed an issue where NVMe drives were not discovered after hot-plug operation.

Fixed a potential data loss risk for SmartCache Logical Drives configured in WriteBack mode during shutdown.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Support SY480 Gen12 server.

]]> iLO 6のサポートを開始しました。

]]> Introduced support for iLO 6.

]]> Added Support for RHEL 10

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

バージョン16.35.4030には、以下の新機能と変更が含まれます。

特定の宛先に向けられたトラフィックのQPタイムアウト「再試行超過」エラーを延期するためのサポートが追加されました。この新しい機能により、ライブマイグレーションによるダウンタイム中に宛先への接続が切断されることが防止されます。

New features and changes included in version 16.35.4030:

Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.

]]> 以下の問題点がバージョン16.35.4030で修正されました。

VF FLRは、そのPFがFLRもトリガーするとスタックします。
ファームウェアがRoCEソースUDPポート制御の非PFドライバー構成 (SET_HCA_CAP.sw_r_roce_src_udp_portで設定) を無視したときに、RoCEパケットに予期しないソースUDPポートが表示されました。

]]> The following issues have been fixed in version 16.35.4030:

VF FLR would get stuck when its PF triggered the FLR as well.
Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).

バージョン16.35.4030には、以下の新機能と変更が含まれます。

特定の宛先に向けられたトラフィックのQPタイムアウト「再試行超過」エラーを延期するためのサポートが追加されました。この新しい機能により、ライブマイグレーションによるダウンタイム中に宛先への接続が切断されることが防止されます。

New features and changes included in version 16.35.4030:

Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.

]]> 以下の問題点がバージョン16.35.4030で修正されました。

VF FLRは、そのPFがFLRもトリガーするとスタックします。
ファームウェアがRoCEソースUDPポート制御の非PFドライバー構成 (SET_HCA_CAP.sw_r_roce_src_udp_portで設定) を無視したときに、RoCEパケットに予期しないソースUDPポートが表示されました。

]]> The following issues have been fixed in version 16.35.4030:

VF FLR would get stuck when its PF triggered the FLR as well.
Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).

]]>

Added support for RHEL10.

]]>

Added support for RHEL10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> 今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

]]> See the iSUT Release Notes for information about the issues resolved in this release

]]> 今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

]]> See the iSUT Release Notes for information about the issues resolved in this release

]]> 今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

]]> See the iSUT Release Notes for information about the issues resolved in this release

]]> 今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

]]> See the iSUT Release Notes for information about the issues resolved in this release

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

このメンテナンスリビジョンにより、データの完全性が向上します。

このファームウェアにアップグレードしない場合のリスクは、特定のエラーやタイミング条件でデータが破損する可能性が高まることです。

]]>

This maintenance revision improves data integrity.

The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Added help text for "Smooth Cooling" RBSU option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Added help text for "Smooth Cooling" RBSU option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Added help text for "Smooth Cooling" RBSU option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Added help text for "Smooth Cooling" RBSU option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]> No changes or new features have been included in version 20.43.2026.

]]> No changes or new features have been included in version 20.43.2026.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

バージョン20.43.1014には、以下の新機能と変更が含まれます。

eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。
拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

New features and changes included in version 20.43.1014:

Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

]]> 以下の問題点がバージョン20.43.1014で修正されました：

"create_sq"が無効なmboxを使用した場合、セットアップがクラッシュする。
FACTORYデフォルトのNV構成値を照会するとき、ファームウェアは常に、適用される"次の"値を返す。

]]> The following issues have been fixed in version 20.43.1014:

Setup crash when "create_sq" used invalid mbox.
The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.

]]>

Added support for RHEL10.

]]>

Added support for RHEL10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

This is a recommended FW release that provides bug fixes for the P5430

]]>

This is a recommended FW release that provides bug fixes for the P5430

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

このFWPKGからROMフラッシュウェイを削除します。

]]>

Remove ROM flash way from this FWPKG.

]]>

修正方法 - IO実行中に優先度の低いコマンドが頻繁に挿入されると、ドライブがランダムにオフラインになる可能性があります。

詳しくは、HPEカスタマーアドバイザリ: https://support.hpe.com/hpesc/public/docDisplay?docId=a00141941en_us を参照してください。

]]>

To fix - Frequent insertion of low priority commands during IO execution may lead to drive offline randomly.

For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00141941en_us

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Added Support for RHEL 10

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

Support new Gen12 servers.

]]>

Support new Gen12 servers.

]]>

新しいGen12サーバーをサポートします。

新しいOS Azure Stack HCI 23H2をサポートします。

]]>

Support new Gen12 servers.

Support new OS Azure Stack HCI 23H2 .

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> TBD

]]>

Improvements to our out-of-band message handling to ensure robust device management capabilities

Changes to improve our PCIe link compatibility as well as device reliability

]]>

Improvements to our out-of-band message handling to ensure robust device management capabilities

Changes to improve our PCIe link compatibility as well as device reliability

]]> Fix issues of MCTP over I2C fix for obtaining Endpoint ID(EID), and SPDM support fix onto MCTP reply message.

]]> TBD

]]>

ホストシステムからファームウェアに割り当てられたメモリページ数 (4 KB) を表示する新しいカウンター"Allocated Memory Pages"を追加しました。

MlxNdPerfは複数のQPを使用した帯域幅テストをサポートするようになりました。

DevXインターフェイスでの動的ステアリングルール挿入のサポートが追加されました。

]]>

Added a new counter "Allocated Memory Pages" to show the number of memory pages (4KB) allocated to the firmware from the host system.

MlxNdPerf now supports bandwidth tests with multiple QPs.

Added support for dynamic steering rule insertion in DevX interface.

]]>

この製品は、ポーリングによって間違ったリクエストコンテキストが返されるまれなケースを修正しました。

]]>

This product fixed a rare case when polling returns wrong request context.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> No changes or new features have been included in version 20.43.2026.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

バージョン20.43.1014には、以下の新機能と変更が含まれます。

eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。
拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

New features and changes included in version 20.43.1014:

Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

]]> 以下の問題点がバージョン20.43.1014で修正されました：

"create_sq"が無効なmboxを使用した場合、セットアップがクラッシュする。
FACTORYデフォルトのNV構成値を照会するとき、ファームウェアは常に、適用される"次の"値を返す。

]]> The following issues have been fixed in version 20.43.1014:

Setup crash when "create_sq" used invalid mbox.
The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.

]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Added help text for "Smooth Cooling" RBSU option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Added help text for "Smooth Cooling" RBSU option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]> 今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> 今回のリリースで解決した問題については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the issues resolved in this release.

]]> 今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> 今回のリリースで解決した問題については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the issues resolved in this release.

]]>

Updated Version Control

]]>

Updated Version Control

]]>

サポートされる製品をアップデートしました

]]>

Updated supported product

]]>

Firmware maintenance release of Samsung U.3 NVMe SSD with HPK4.

]]>

Firmware maintenance release of Samsung U.3 NVMe SSD with HPK4.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

その他のログ機能とFW機能強化を追加します。

]]>

Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.

Adding other logging and FW enhancements.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> New features and changes included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added support for SyncE at 1G link speed.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> New features and changes included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added support for SyncE at 1G link speed.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> The following issues have been fixed in version 28.44.1036:

Cable info semaphore deadlock.
Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
Enabling PCC NP and setting the link type to one port as IB and the other as Ethernet could cause an assert to appear in dmesg with ext_synd 0x8309.

]]> The following issues have been fixed in version 28.44.1036:

Cable info semaphore deadlock.
Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
Enabling PCC NP and setting the link type to one port as IB and the other as Ethernet could cause an assert to appear in dmesg with ext_synd 0x8309.

]]> バージョン28.43.1014には、以下の新機能と変更が含まれます。

PCIeテレメトリ (NSMタイプ2) のサポートが追加されました。
PCC NPソリューションをACEハードウェアプラットフォームからDPAハードウェアプラットフォームに移行しました。新しい機能は、次のモードに適用できます: 1) PCC_INT_EN=TrueかつPCC_INT_NP_RTT_DATA_MODE=INGRESS_BYTE 2) PCC_INT_EN=TrueかつPCC_INT_NP_RTT_DATA_MODE=NO_DATA。最初のモードは、RTT応答でZTRCC RXバイトをサポートするために使用されます。
eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。
拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

LAGにグループ化された複数のE-SwitchにわたるQoSスケジューリングのサポートが追加されました。ある物理機能のVPortメンバーを、別の物理機能からのレートグループに追加することができ、グループのレート制限はそれらのVPortメンバーにも適用されます。
ステアリングアクション (STC) の"Jump To Flow"テーブルパラメーターに'table_type_valid'および'table_type'フィールドが追加され、ユーザーがNIC_TXからFDB_TXにジャンプしてACLテーブルをバイパスできるようになりました。
さまざまなユースケースでNICドメインをバイパスすることでホップ削減を可能にしました。このようなアクションにより、大量のフローとデバイスを処理するためのホップ数が削減されます (PPSが向上します)。この新しい機能を有効にするために、テーブルのRX側にジャンプできるようにする新しいSTCアクションタイプ"JUMP_TO_FDB_RX"が追加されました。
動的フレックスパーサーでサポートされる"ARC-IN"の最大数を1から8に、"ARC-OUT"の最大数を3から8に増やしました。
PCC ZTR_RTTCにレートとラウンドトリップ時間 (RTT) のヒストグラムサポートが追加されました。
VF移行中にCQドアベルが失われた場合に備えて回復手順を追加しました。
VGAゲインとCTLEのためのPCIe Gen4/5の新しい静的構成を変更しました。
Gen4/5開始点のCTLEおよびVGAゲインを変更しました。
SPDMのRDT値を増加しました。

]]> New features and changes included in version 28.43.1014:

Added support for PCIe Telemetry (NSM Type 2).
Migrated PCC NP solution from ACE hardware platform to DPA hardware platform. The new capability is applicable to the following modes: 1) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=INGRESS_BYTE 2) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=NO_DATA. The first mode is used to support ZTRCC RX bytes in RTT response.
Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
Enabled hop reduction by bypassing NIC domain in various use cases. Such action reduces the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
Increased the maximum number of supported "ARC-IN" from 1 to 8 and "ARC-OUT" from 3 to 8 for the dynamic flex parser.
Added histogram support for rate and Round-Trip Time (RTT) in PCC ZTR_RTTC.
Added a recovery step in case of CQ doorbell getting lost during VF migration.
Changed PCIe Gen4/5 new static configuration for VGA gain and CTLE.
Changed the CTLE and VGA gain for Gen4/5 starting point.
Increased SPDM's RDT value.

]]> 以下の問題点がバージョン28.43.1014で修正されました：

アクティブなケーブルが接続されている場合にのみPLDMにポート温度センサーPDRが含まれている。
ポート速度が1Gまたは10Gに設定されている場合にPTPの精度が低下することがある。
動的MSIx機能が有効でvirtioエミュレーションが無効になっているときに、MSIx削減フローが誤った制限 (MSIxの合計数が誤って8kから4kに削減される) でトリガーされる。
光ファイバーケーブルを使用する場合、ロスレスパケットが400GB 4レーンでドロップする。
FACTORYデフォルトのNV構成値を照会するとき、ファームウェアは常に、適用される"次の"値を返す。
TP4設定の上書きに関連する問題。
まれに発生する証明書署名検証エラー。
マルチASICプラットフォームでモジュールを再挿入した後のケーブルリンクアッププロセスに誤りがある。
user_cc_enのデフォルト値 (mlxreg) が正しくない。

]]> The following issues have been fixed in version 28.43.1014:

PLDM included port temperature sensor PDR only if an active cable was connected.
PTP accuracy degradation occasionally occurred for port speed configured to 1G or 10G.
MSIx reduction flow was triggered with an incorrect limitation (the total number of MSIx is reduced from 8k to 4k by mistake) when the dynamic MSIx feature was enabled and virtio emulation was disabled.
Lossless packet drops at 400GB 4 lanes when using an optic fiber cable.
The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
An issue related to override TP4 settings.
A rare certificate signature verification error.
Erroneous cable linkup process after reinserting a module in multi ASIC platforms.
Incorrect user_cc_en default value (mlxreg).

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]> 新しいプラットフォームのサポートを追加します。

]]> Add new support platform.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

このバージョンには、第4世代および第5世代Intel^® Xeon^®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

既知の問題点：

なし

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]>

Added fix to address a rare case where drive health queries can trigger false drive predictive failure.

]]>

Added fix to address a rare case where drive health queries can trigger false drive predictive failure.

]]> This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

Known Issues:

None]]> 重要な注意:

このバージョンのServer Platform Services（SPS）ファームウェアには、Intel Xeon E-2400シリーズプロセッサー用の最新パッケージが含まれています。このバージョンのSPS 6.03.04.048.0 (2.10_12_03_2024)は、システムROM 2.10_12-06-2024と組み合わせる必要があります。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

このバージョンは、Intel Catlow RPL-E PLR2 および Intel Catlow RPL-E Refresh PV ガイダンスに準拠しています。

既知の問題点:

なし]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains the latest package for the Intel Xeon E-2400 series processors. This version of the SPS 06.03.04.048.0 (2.10_12_03_2024) should be paired with System ROM 2.10_12-06-2024.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with Intel Catlow RPL-E PLR2 and Intel Catlow RPL-E Refresh PV guidance.

Known Issues:

None]]> 重要な注意：

なし

ファームウェアの依存関係:

なし

機能強化/新しい機能：

Gen11 AMDプラットフォームの新しいレイアウトデザインに基づいてADC変換式を変更しました。
AMDプラットフォーム上の高速プラットフォームトリガーメカニズムの精度が向上しました。

既知の問題点：

なし

]]> Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.
Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

Known Issues:

None

]]> Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial version of the firmware.

Known Issues:

None

]]> Important Notes:

None

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial version of the firmware.

Known Issues:

None

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]> Add new support platform.

]]> This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 3.

]]> この製品は、Fortville 9.5のファームウェアとの互換性を強化しました。

]]> This product enhanced the compatibility with firmware of Fortville 9.5.

]]>

Added support for Azure Stack HCI 23H2

]]>

Added support for Azure Stack HCI 23H2

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Microsoft Windows Server 2025のサポートを追加しました。

]]>

Added support for Microsoft Windows Server 2025.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> TBD

]]>

この製品は、ネットワーク構成を簡素化するために、Ethernet/LLDPTransmit/ManagementVlanId プロパティを削除します。

この製品は、MSI-Xベクトルカウントを調整してリソース枯渇を防ぐことで、システムの安定性を高めます。

この製品は、MCTPトランスポートヘッダーにMsgTagを設定することでSPDM機能を強化します。

この製品は、BNXTドライバーのコアダンプ機能を強化し、診断機能を向上させます。

この製品は、RXレートプロファイルを追加し、DPDK機能を改善することで、ネットワークパフォーマンスを強化します。

]]>

This product removes the Ethernet/LLDPTransmit/ManagementVlanId property to simplify network configuration.

This product enhances system stability by adjusting MSI-X vector counts to prevent resource exhaustion.

This product enhances SPDM functionality by setting the MsgTag in the MCTP transport header.

This product enhances the coredump feature in the BNXT driver for better diagnostic capabilities.

This product enhances network performance by adding the RX rate profile and improving DPDK functionality.

]]>

この製品は、エラー回復中にファームウェアがドライバーにリセット通知を送信できない問題を修正します。

この製品は、RDE bejString特殊文字エスケープシーケンスが誤ってエンコードされる問題を修正します。

この製品は、PLDMポートリンク速度センサーの読み取り値とイベント値が負として報告される問題を修正します。

この製品は、XDP/LPBK L2コンテキストエントリによってリソースリークが発生する問題を修正します。

この製品は、MACアドレスがゼロ以外の場合にのみXDPフローが解放されるようにすることで、XDPフローが適切に解放されない問題を修正します。

]]>

This product fixes the issue where the firmware fails to send a reset notification to the driver during error recovery.

This product fixes the issue where the RDE bejString special character escape sequences were incorrectly encoded.

This product fixes the issue where the PLDM port link speed sensor reading and event values were reported as negative.

This product fixes the issue where the XDP/LPBK L2 context entry caused resource leaks.

This product fixes the issue where XDP flows were not properly freed by ensuring they are released only when the MAC address is non-zero.

]]>

このFWPKGからROMフラッシュウェイを削除します。

]]>

Remove ROM flash way from this FWPKG.

]]>

This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

Assertの修正、現在のファームウェアの改善、およびバグ修正を修正します。

]]>

Fix to Assert fixes, current firmware improvements and bug fixes.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> This product now supports Red Hat Enterprise Linux 9.5.

]]> This product now supports Red Hat Enterprise Linux 9.5.

]]> この製品は、カーネルのコンパイルの問題を修正します。

]]> This product fixes the kernel compilation issue.

]]> New features and changes included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added support for SyncE at 1G link speed.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> New features and changes included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added support for SyncE at 1G link speed.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> The following issues have been fixed in version 28.44.1036:

Cable info semaphore deadlock.
Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
Enabling PCC NP and setting the link type to one port as IB and the other as Ethernet could cause an assert to appear in dmesg with ext_synd 0x8309.

]]> The following issues have been fixed in version 28.44.1036:

Cable info semaphore deadlock.
Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
Enabling PCC NP and setting the link type to one port as IB and the other as Ethernet could cause an assert to appear in dmesg with ext_synd 0x8309.

]]> バージョン28.43.1014には、以下の新機能と変更が含まれます。

PCIeテレメトリ (NSMタイプ2) のサポートが追加されました。
PCC NPソリューションをACEハードウェアプラットフォームからDPAハードウェアプラットフォームに移行しました。新しい機能は、次のモードに適用できます: 1) PCC_INT_EN=TrueかつPCC_INT_NP_RTT_DATA_MODE=INGRESS_BYTE 2) PCC_INT_EN=TrueかつPCC_INT_NP_RTT_DATA_MODE=NO_DATA。最初のモードは、RTT応答でZTRCC RXバイトをサポートするために使用されます。
eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。
拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

LAGにグループ化された複数のE-SwitchにわたるQoSスケジューリングのサポートが追加されました。ある物理機能のVPortメンバーを、別の物理機能からのレートグループに追加することができ、グループのレート制限はそれらのVPortメンバーにも適用されます。
ステアリングアクション (STC) の"Jump To Flow"テーブルパラメーターに'table_type_valid'および'table_type'フィールドが追加され、ユーザーがNIC_TXからFDB_TXにジャンプしてACLテーブルをバイパスできるようになりました。
さまざまなユースケースでNICドメインをバイパスすることでホップ削減を可能にしました。このようなアクションにより、大量のフローとデバイスを処理するためのホップ数が削減されます (PPSが向上します)。この新しい機能を有効にするために、テーブルのRX側にジャンプできるようにする新しいSTCアクションタイプ"JUMP_TO_FDB_RX"が追加されました。
動的フレックスパーサーでサポートされる"ARC-IN"の最大数を1から8に、"ARC-OUT"の最大数を3から8に増やしました。
PCC ZTR_RTTCにレートとラウンドトリップ時間 (RTT) のヒストグラムサポートが追加されました。
VF移行中にCQドアベルが失われた場合に備えて回復手順を追加しました。
VGAゲインとCTLEのためのPCIe Gen4/5の新しい静的構成を変更しました。
Gen4/5開始点のCTLEおよびVGAゲインを変更しました。
SPDMのRDT値を増加しました。

]]> New features and changes included in version 28.43.1014:

Added support for PCIe Telemetry (NSM Type 2).
Migrated PCC NP solution from ACE hardware platform to DPA hardware platform. The new capability is applicable to the following modes: 1) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=INGRESS_BYTE 2) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=NO_DATA. The first mode is used to support ZTRCC RX bytes in RTT response.
Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
Enabled hop reduction by bypassing NIC domain in various use cases. Such action reduces the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
Increased the maximum number of supported "ARC-IN" from 1 to 8 and "ARC-OUT" from 3 to 8 for the dynamic flex parser.
Added histogram support for rate and Round-Trip Time (RTT) in PCC ZTR_RTTC.
Added a recovery step in case of CQ doorbell getting lost during VF migration.
Changed PCIe Gen4/5 new static configuration for VGA gain and CTLE.
Changed the CTLE and VGA gain for Gen4/5 starting point.
Increased SPDM's RDT value.

]]> 以下の問題点がバージョン28.43.1014で修正されました：

アクティブなケーブルが接続されている場合にのみPLDMにポート温度センサーPDRが含まれている。
ポート速度が1Gまたは10Gに設定されている場合にPTPの精度が低下することがある。
動的MSIx機能が有効でvirtioエミュレーションが無効になっているときに、MSIx削減フローが誤った制限 (MSIxの合計数が誤って8kから4kに削減される) でトリガーされる。
光ファイバーケーブルを使用する場合、ロスレスパケットが400GB 4レーンでドロップする。
FACTORYデフォルトのNV構成値を照会するとき、ファームウェアは常に、適用される"次の"値を返す。
TP4設定の上書きに関連する問題。
まれに発生する証明書署名検証エラー。
マルチASICプラットフォームでモジュールを再挿入した後のケーブルリンクアッププロセスに誤りがある。
user_cc_enのデフォルト値 (mlxreg) が正しくない。

]]> The following issues have been fixed in version 28.43.1014:

PLDM included port temperature sensor PDR only if an active cable was connected.
PTP accuracy degradation occasionally occurred for port speed configured to 1G or 10G.
MSIx reduction flow was triggered with an incorrect limitation (the total number of MSIx is reduced from 8k to 4k by mistake) when the dynamic MSIx feature was enabled and virtio emulation was disabled.
Lossless packet drops at 400GB 4 lanes when using an optic fiber cable.
The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
An issue related to override TP4 settings.
A rare certificate signature verification error.
Erroneous cable linkup process after reinserting a module in multi ASIC platforms.
Incorrect user_cc_en default value (mlxreg).

]]>

このFWPKGからROMフラッシュウェイを削除します。

]]>

Remove ROM flash way from this FWPKG.

]]> It has fix code for V6 Read disturb issue and other issue

]]> This product fixes the kernel compilation issue.

]]> この製品は、現在SUSE Linux Enterprise Server 15 SP6をサポートしています。

]]> This product now supports SUSE Linux Enterprise Server 15 SP6.

]]> バージョン3.3-3にアップデートしました

このコンポーネントはFIPSが有効になっています。

]]> Updated to version 3.3-3

This Component is FIPs enabled.

]]> このコンポーネントはFIPSが有効になっています。

]]> This Component is FIPs enabled.

]]> バージョン3.3-3にアップデートしました

このコンポーネントはFIPSが有効になっています。

]]> Updated to version 3.3-3

This Component is FIPs enabled.

]]> このコンポーネントはFIPSが有効になっています。

]]> This Component is FIPs enabled.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

その他のログ機能とFW機能強化を追加します。

]]>

Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.

Adding other logging and FW enhancements.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

Assertの修正、現在のファームウェアの改善、およびバグ修正を修正します。

]]>

Fix to Assert fixes, current firmware improvements and bug fixes.

]]> バージョン6.0.0.1-4にキットをアップデートしました

]]> Updated the kit to version 6.0.0.1-4

]]> バージョン6.0.0.1-4にキットをアップデートしました

]]> Updated the kit to version 6.0.0.1-4

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> See the AMS Release Notes for information about the issues resolved in this release.

]]> 今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> 今回のリリースで解決した問題については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the issues resolved in this release.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

Assertの修正、現在のファームウェアの改善、およびバグ修正を修正します。

]]>

Fix to Assert fixes, current firmware improvements and bug fixes.

]]>

fix for genericmsi version

]]>

fix for genericmsi version

]]>

物理ドライブの情報ページに書き込みキャッシュステータスフィールドを追加しました。

]]>

Added Write Cache Status field to the info page for physical drives.

]]>

不適切にプロンプトされた高速パリティ初期化メッセージを修正しました。

脆弱性 VE-2023-45853を修正しました。

]]>

Fixed inappropriately prompted Rapid Parity Initialization messages.

Fixed vulnerability CVE-2023-45853.

]]> This Firmware package contains following firmware versions:

Adapter	Speed	MBI	Firmware	UEFI	Boot Bios
HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.10.09	09.15.05	7.39	0.0
HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.10.09	09.15.05	7.39	0.0
HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	02.10.09	09.15.05	7.39	0.0
HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter	64Gb	02.10.09	09.15.05	7.39	0.0

]]> This Firmware package contains following firmware versions:

Adapter	Speed	MBI	Firmware	UEFI	Boot Bios
HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.10.09	09.15.05	7.39	0.0
HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.10.09	09.15.05	7.39	0.0
HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	02.10.09	09.15.05	7.39	0.0
HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter	64Gb	02.10.09	09.15.05	7.39	0.0

]]> このファームウェアパッケージには、以下のファームウェアバージョンが含まれています。

アダプター	速度	MBI	ファームウェア	UEFI	ブートBIOS
HPE SN1610Q 32Gbデュアルポートファイバーチャネルホストバスアダプター	32Gb	02.10.08	09.15.05	7.39	0.0
HPE SN1610Q 32Gbシングルポートファイバーチャネルホストバスアダプター	32Gb	02.10.08	09.15.05	7.39	0.0
HPE SN1700Q 64Gbデュアルポートファイバーチャネルホストバスアダプター	64Gb	02.10.08	09.15.05	7.39	0.0
HPE SN1700Q 64Gbシングルポートファイバーチャネルホストバスアダプター	64Gb	02.10.08	09.15.05	7.39	0.0

]]> This Firmware package contains following firmware versions:

Adapter	Speed	MBI	Firmware	UEFI	Boot Bios
HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.10.08	09.15.05	7.39	0.0
HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.10.08	09.15.05	7.39	0.0
HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	02.10.08	09.15.05	7.39	0.0
HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter	64Gb	02.10.08	09.15.05	7.39	0.0

]]>

The FW address PCIe link drop, Drive detection after hot re-insert on Windows, Other regular FW patch release.

]]>

The FW address PCIe link drop, Drive detection after hot re-insert on Windows, Other regular FW patch release.

]]>

サポートする電源モードとして12W、16W、18Wを追加します。

]]>

Add 12W, 16W and 18W as supporting power mode.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Updated multi-language translation.

Added the help text for "Smooth Cooling" RBSU option.

]]> Updated multi-language translation.

Added the help text for "Smooth Cooling" RBSU option.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]>

Added support for Azure Stack HCI 23H2

]]>

Added support for Azure Stack HCI 23H2

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.

For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us

]]>

Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.

For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

The FW address: PCIe link drop and 0ther regular FW patches release.

]]>

The FW address: PCIe link drop and 0ther regular FW patches release.

]]> Added support for:

Red Hat Enterprise Linux 10.0

Updated to version 14.4.473.24

]]> Added support for:

Red Hat Enterprise Linux 10.0

Updated to version 14.4.473.24

]]> バージョン14.4.473.7にアップデートしました

]]> Updated to version 14.4.473.7

]]>

Added RHEL10 support

]]>

Added RHEL10 support

]]>

物理ドライブの情報ページに書き込みキャッシュステータスフィールドを追加しました。

]]>

Added Write Cache Status field to the info page for physical drives.

]]>

不適切にプロンプトされた高速パリティ初期化メッセージを修正しました。

脆弱性CVE-2023-45853を修正しました。

]]>

Fixed inappropriately prompted Rapid Parity Initialization messages.

Fixed vulnerability CVE-2023-45853.

]]>

Updated Supported Environments

]]>

Updated Supported Environments

]]>

サポートされるプラットフォームをアップデートしました

]]>

Updated supported platforms

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> Added help text for "Smooth Cooling" in system configuration (RBSU) option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Added help text for "Smooth Cooling" in system configuration (RBSU) option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Important Notes:

This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]> Important Notes:

This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]> 重要な注意：

システムROMのこのリビジョンには、AMD第4世代EPYCプロセッサー用のAMDリファレンスコードGenoaPI 1.0.0.Eが含まれています。

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

修正された問題点:

ファームウェア管理プロトコル経由でファームウェアのアップデートを実行するときにシステムがRSODになる可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.E for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

Known Issues:

None]]> 初期バージョン。

]]> Initial version.

]]> 初期バージョン。

]]> Initial version.

]]> This product now supports Red Hat Enterprise Linux 9.5.

]]> This product fixes the kernel compilation issue.

]]> この製品は現在、新しいプラットフォームでサポートされています。

]]> This product is now supported on a new platform.

]]> Added support for:

Red Hat Enterprise Linux 10.0

Updated to version 14.4.473.24

]]> Added support for:

Red Hat Enterprise Linux 10.0

Updated to version 14.4.473.24

]]> バージョン14.4.473.7にアップデートしました

]]> Updated to version 14.4.473.7

]]>

Added support for RHEL10.

]]>

Added support for RHEL10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> This product enhanced the compatibility with the latest drivers.

]]>

この製品は、現在VMware 9.0をサポートしています。

]]>

This product now supports VMware 9.0

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

このバージョンには、第4世代および第5世代Intel^® Xeon^®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

既知の問題点：

なし

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> ファームウェアHPK4で行われた変更と改善により、以前のファームウェアよりもPCIe VDM上のMCTPが無効になります。

]]> Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

]]> ファームウェアHPK4で行われた変更と改善により、以前のファームウェアよりも PCIe VDM上のMCTPが無効になります。

]]> Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> To eliminate the risk of gen drop issue.

]]>

FW update to eliminate the risk of Drive missing issue.

Fixed low sequential write performance in Windows 2022

]]>

FW update to eliminate the risk of Drive missing issue.

Fixed low sequential write performance in Windows 2022

]]>

Updated supported platforms

]]>

Updated supported platforms

]]>

サポートされるプラットフォームをアップデートしました

]]>

Updated supported platforms

]]>

Added Support for ESXi 9.0

]]>

Added Support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Support SY480 Gen12 server.

]]> RL300 Gen11サーバーおよびGen12サーバーをサポート

]]> Support RL300 Gen11 server and Gen12 servers.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> Important Notes:

Ver. 1.2.2(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.2.2. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.2.2.

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial verison of the firmware.

Known Issues:

None

]]> Important Notes:

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial verison of the firmware.

Known Issues:

None

]]> 重要な注意：

Ver 1.2.2(B)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver 1.2.2と同等です。ファームウェアをバージョン1.2.2にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョン(B)にアップグレードする必要はありません。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

これは、このファームウェアでの最初のバージョンです。

既知の問題点：

なし

]]> Important Notes:

Ver. 1.2.2(B) contains updates to the firmware packaging and is functionally equivalent to ver. 1.2.2. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 1.2.2.

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial verison of the firmware.

Known Issues:

None

]]> Updated multi-language translation.

Added the help text for "Smooth Cooling" RBSU option.

]]> Updated multi-language translation.

Added the help text for "Smooth Cooling" RBSU option.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]> 重要な注意:

Ver. 1.0.4(D)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver 1.0.4 ファームウェアをバージョン1.0.4にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョンDにアップグレードする必要はありません。

このLinuxコンポーネントは、Service Pack for ProLiant 2024.11.00.00 と互換性があります。

ファームウェアの依存関係:

なし

機能強化/新しい機能：

既知の問題点：

なし

]]> Important Notes:

Ver. 1.0.4(D) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.4. It is not necessary to upgrade with Revision D if a previous component revision was used to upgrade the firmware to version 1.0.4.

This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

Firmware Dependencies:

None

Enhancements/New Features:

Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.
Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

Known Issues:

None

]]> 重要な注意：

Ver 1.0.4(C)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver 1.0.4と同等です。ファームウェアをバージョン1.0.4にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョンCにアップグレードする必要はありません。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

既知の問題点：

なし

]]> Important Notes:

Ver. 1.0.4(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.4. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.0.4.

Firmware Dependencies:

None

Enhancements/New Features:

Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.
Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

Known Issues:

None

]]> ドライバーバージョン24.10.26603.0にアップデートしました

]]> Updated to driver version 24.10.26603.0

]]> ドライバーバージョン24.10.26603.0にアップデートしました

]]> Updated to driver version 24.10.26603.0

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Initial Build

]]> • REST および HPE iLO UIの前面のOCPAおよびOCPBラベルの名前をOCPスロット AおよびOCPスロット Bに変更しました。

• REST および HPE iLO UIの背面のOCPAおよびOCPBラベルの名前をOCPスロット AおよびOCPスロット Bに変更しました。

• HPE iLO Redfishがエアフィルターの交換に関する明確なイベント通知を発行する機能。

• Azure Stack HCI 23H2 OSのサポート。

• HPE ブランドガイドラインに準拠しました。

• HPE iLOにHPE Compute Ops Managementを含むHPE ProLiant Advancedライセンスの追加。

• 仮想メディアマウントのURLの長さのサポートが1023文字に増加しました。

]]> • Renamed the front OCPA and OCPB labeling in REST and HPE iLO UI to OCP Slot A and OCP Slot B.

• Renamed the rear OCPA and OCPB labeling in REST and HPE iLO UI to OCP Slot A and OCP Slot B.

• Ability of HPE iLO Redfish to raise a clear event notification for an air filter replacement.

• Support for Azure Stack HCI 23H2 OS.

• Adhered to HPE branding guidelines.

• Addition of HPE ProLiant Advanced License to HPE iLO with HPE Compute Ops Management.

• Support for the Virtual Media Mount URL length increased to 1023 characters.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Added help text for "Smooth Cooling" in system configuration (RBSU) option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Added help text for "Smooth Cooling" in system configuration (RBSU) option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Important Notes:

This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]> Important Notes:

This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]> Added help text for "Smooth Cooling" in system configuration (RBSU) option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Added help text for "Smooth Cooling" in system configuration (RBSU) option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Important Notes:

This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]> Important Notes:

This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]>

Added support for Azure Stack HCI 23H2

]]>

Added support for Azure Stack HCI 23H2

]]>

This maintenance revision improves data integrity.

The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

]]>

This maintenance revision improves data integrity.

The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

]]>

This maintenance revision improves data integrity.

The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

]]>

This maintenance revision improves data integrity.

The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Added help text for "Smooth Cooling" RBSU option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Added help text for "Smooth Cooling" RBSU option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Fix 1) PCIe link length drop in AMD x2 system configuration
2) Drive detection after hot re-insert on Windows
3) Other regular FW patch release.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> SHA384 fix

]]> None

]]> - HPE Compute Edge Server e930tのサポートを追加

]]> - Added support for HPE Compute Edge Server e930t

]]> This product fixes an issue where Large Send Offload (LSO) is not working.

]]> この製品は、Azure Stack HCI OSをサポートするようになりました。

]]> This product now supports Azure Stack HCI OS.

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]> 新しいプラットフォームのサポートを追加します。

]]> Add new support platform.

]]>

サポート環境をアップデートしました

]]>

Updated support environments

]]>

サポート環境をアップデートしました

]]>

Updated support environments

]]> TBD

]]>

この製品は、トンネルベースのTPA (TCP パケット集約) のサポートを追加するように強化されています。

この製品は、コアダンプファイルの概要を生成するためのコアダンプ機能を強化します。

]]>

This product enhances to add support for Tunnel based TPA (TCP Packet Aggregation).

This product enhances the coredump feature for generating the summary of a coredump file.

]]> New vesion with 1.16

]]>

6番目のI2Cバスハンドラーに対して集約された割り込みハンドラーをより効率的にしました。

6番目のI2Cバスのカウンタを削除

有効なI2Cヘルスモニター

]]>

Made aggregated interrupt handler more efficent for 6th I2C bus handler

eliminated counters in 6th I2C bus

enabled I2C health monitor

]]> FRUの問題を修正

]]> Fix FRU issue

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]>

Firmware maintenance release of Samsung PM1743 NVMe SSD with HPK6

]]>

Firmware maintenance release of Samsung PM1743 NVMe SSD with HPK6

]]>

Modify Power State modes (25/18/16/14W) which can be enabled as an option.

Improved on TTR requirement to fix device temporarily not found issue after hot-plug.

]]>

Modify Power State modes (25/18/16/14W) which can be enabled as an option.

Improved on TTR requirement to fix device temporarily not found issue after hot-plug.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> The following new features and changes have been included in version 25.01-0.6.0.1

[ConnectX-7] Multi-host LAG: When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Hardware GRO: Hardware Generic Receive Offload (GRO) reduces CPU overhead and improves throughput by offloading the task of reassembling incoming network packets from the CPU.
Precision Time Measurement (PTM): Precision Time Measurement (PTM) enhances clock synchronization accuracy between the NIC's hardware clock and the system's host clock. It addresses inaccuracies caused by asymmetric PCIe request and response times, which can affect PTP.
Transport RDMA Steering Domain: Transport RDMA steering domain in the kernel allows users to create steering tables and rules using the new domain types FS_FT_RDMA_TRANSPORT_RX and FS_FT_RDMA_TRANSPORT_TX, with support for both DevX commands and the added functionality in mlx5dv_create_flow_matcher().
DevX QPs Parallel Cleanup: Reduces cleanup (kill) time of user-space applications that use DevX QPs, without requiring any changes on the user's end. When using a kernel that includes this patch, DevX QP destruction upon cleanup will be sent to the firmware in parallel, rather than serially as before, resulting in faster cleanup times. The more DevX QPs the application has, the more noticeable the improvement will be.
Flow Control for Solicited MADs: Implements flow control for solicited MADs in the MAD layer to prevent loss due to insufficient resources at the receiver. Both the client and server function as receivers: the server handles incoming requests, while the client receives the responses.
Increased the default TX queue length in IPoIB to enhance qdisc queueing and reduce CPU spikes.
The "--defltprio" flag has been deprecated and removed from the mlnx_qos tool.

]]> The following new features and changes have been included in version 25.01-0.6.0.1

[ConnectX-7] Multi-host LAG: When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Hardware GRO: Hardware Generic Receive Offload (GRO) reduces CPU overhead and improves throughput by offloading the task of reassembling incoming network packets from the CPU.
Precision Time Measurement (PTM): Precision Time Measurement (PTM) enhances clock synchronization accuracy between the NIC's hardware clock and the system's host clock. It addresses inaccuracies caused by asymmetric PCIe request and response times, which can affect PTP.
Transport RDMA Steering Domain: Transport RDMA steering domain in the kernel allows users to create steering tables and rules using the new domain types FS_FT_RDMA_TRANSPORT_RX and FS_FT_RDMA_TRANSPORT_TX, with support for both DevX commands and the added functionality in mlx5dv_create_flow_matcher().
DevX QPs Parallel Cleanup: Reduces cleanup (kill) time of user-space applications that use DevX QPs, without requiring any changes on the user's end. When using a kernel that includes this patch, DevX QP destruction upon cleanup will be sent to the firmware in parallel, rather than serially as before, resulting in faster cleanup times. The more DevX QPs the application has, the more noticeable the improvement will be.
Flow Control for Solicited MADs: Implements flow control for solicited MADs in the MAD layer to prevent loss due to insufficient resources at the receiver. Both the client and server function as receivers: the server handles incoming requests, while the client receives the responses.
Increased the default TX queue length in IPoIB to enhance qdisc queueing and reduce CPU spikes.
The "--defltprio" flag has been deprecated and removed from the mlnx_qos tool.

]]> The following issues have been fixed in version 25.01-0.6.0.1:

Incorrect SA switching when multiple active TX SAs are created on a SC, caused by failing to respect the SA configured by "encoding_sa".
Incorrect receive queue cache size calculation.

]]> The following issues have been fixed in version 25.01-0.6.0.1:

Incorrect SA switching when multiple active TX SAs are created on a SC, caused by failing to respect the SA configured by "encoding_sa".
Incorrect receive queue cache size calculation.

]]> バージョン24.10-0.7.0.1には、次の新機能と変更が含まれています。

[ベータ] LAGにグループ化された複数のE-SwitchにわたるQoSスケジューリングのサポートが追加されました。ある物理機能のVPortメンバーを、別の物理機能からのレートグループに追加することができ、グループのレート制限はそれらのVPortメンバーにも適用されます。
ユーザースペースからRDMAイベントを監視するためのカーネルサポートが追加されました。netlinkまたはRDMAツールを使用すると、ユーザーはデバイスの登録、デバイスの登録解除、netdevの接続/切断などのInfiniBandデバイスのイベントと変更を監視できます。
SFとそのIRQのマッピングに関する情報をユーザーに提供するために、SF sysfsディレクトリ内に"irqs"ディレクトリを追加しました。
SFの完了EQの最大数を設定するためのサポートが追加されました。
create_cqフローのuar_page_indexに対する最大23ビットのサポートが追加されました。これにより、ユーザーは、ハードウェア/ファームウェアでサポートされている2^16より大きいuar_page_indexを使用してcreate_cqを実行できるようになります。
[ベータ] devlink-rate APIのトラフィッククラス (TC) 間の帯域幅比率を指定するためのサポートが追加されました。この新しいオプションにより、ユーザーは単一のコマンドで複数のトラフィッククラスにわたって帯域幅を割り当てることができます。この機能により、特に拡張伝送選択を必要とするシナリオにおいて、トラフィック管理をより細かく制御できるようになります。ユーザーは、TC0 (TCP/UDP) に20%、TC5 (RoCE) に80%を割り当てるなど、トラフィッククラスごとに特定の帯域幅のシェアを定義できるようになりました。

]]> The following new features and changes have been included in version 24.10-0.7.0.1:

[Beta] Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
Added kernel support for monitoring RDMA events from userspace. Using the netlink or the RDMA tool, users will be able to monitor the InfiniBand device events and changes such as device register, device unregister and netdev attachment/detachment.
Added the “irqs” directory inside the SF sysfs directory to provide the users information about the mapping of SFs and their IRQs.
Added support for setting a maximum number of completion EQs for SFs.
Added support for up to 23 bits for uar_page_index in create_cq flow. This allows the user to perform create_cq with a uar_page_index larger than 2^16 as supported by the hardware/firmware.
[Beta] Added support for specifying bandwidth proportions between traffic classes (TC) in the devlink-rate API. This new option allows users to allocate bandwidth across multiple traffic classes in a single command. This feature provides a more granular control over traffic management, especially for scenarios requiring Enhanced Transmission Selection. Users can now define a specific bandwidth share for each traffic class, such as allocating 20% for TC0 (TCP/UDP) and 80% for TC5 (RoCE).

]]> 以下の問題点がバージョン24.10-0.7.0.1で修正されました。

udevルールの構文に、次のエラーメッセージをトリガーする無効な行が含まれていました。"/usr/lib/udev/rules.d/90-ib.rules:4 Only network interfaces can be renamed"。
rdma-coreの次のシンボルの問題による"rdma-core"のビルドの失敗：1) mad_register_port_client()シンボルをエクスポートする必要がなかった 2) XDR速度デコード関数が適切にエクスポートされなかった。
イニシエーター/レスポンダーの深度を12に設定しようとすると、ドライバーは実際には深度を8 (2の累乗を切り捨て) に設定し、RDMA読み取り要求が行われたときにユーザーはRDMA NAKを受信した。

]]> The following issues have been fixed in version 24.10-0.7.0.1:

The udev rule included an invalid line in its syntax that triggered the error message: "/usr/lib/udev/rules.d/90-ib.rules:4 Only network interfaces can be renamed".
"rdma-core" build failure due to the following symbol issues in rdma-core: 1) mad_register_port_client() symbol did not need to be exported 2) The XDR speed decoding functions were not properly exported.
When trying to configure the initiator/responder depth to 12, the driver actually configured the depth to 8 (power of 2 rounded down), and the user received an RDMA NAK when RDMA read requests were posted.

]]> Added help text for "Smooth Cooling" in system configuration (RBSU) option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Added help text for "Smooth Cooling" in system configuration (RBSU) option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Important Notes:

This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]> Important Notes:

This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the system may encounter RSOD and fail to update firmware while performing firmware update.

Addressed an issue where the system may encounter RSOD if NVMe-oF target did not have partitions.

Known Issues:

None]]> 重要な注意：

システムROMのこのリビジョンには、AMD第4世代EPYCプロセッサー用のAMDリファレンスコードGenoaPI 1.0.0.Eが含まれています。

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

修正された問題点:

ファームウェア管理プロトコル経由でファームウェアのアップデートを実行するときにシステムがRSODになる可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.E for AMD 4th Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

Known Issues:

None]]>

このFWPKGからROMフラッシュウェイを削除します。

]]>

Remove ROM flash way from this FWPKG.

]]>

ランダム読み取り/書き込みパフォーマンスを向上します。

]]>

Improve random read/write perfomance.

]]> This product fixes an issue where Large Send Offload (LSO) is not working.

]]> 初期バージョン。

]]> Initial version.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> This version is in compliance with Intel Catlow RPL-E Refresh MR1 Unify BKC guidance.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system may encounter reset loop after updating ME/SPS firmware using smart components.

Known Issues:

None]]> 重要な注意:

ファームウェアの依存関係：

なし

機能強化/新しい機能：

このバージョンは、Intel Catlow RPL-E PLR2 および Intel Catlow RPL-E Refresh PV ガイダンスに準拠しています。

既知の問題点:

なし]]> Important Notes:

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with Intel Catlow RPL-E PLR2 and Intel Catlow RPL-E Refresh PV guidance.

Known Issues:

None]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> Updated to version 1.0.0.1

]]> Updated to version 1.0.0.1

]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Updated multi-language translation.

Added the help text for RBSU knob "Smooth Cooling".

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where some options are missing for RBSU knob "Enabled Cores per Processor".

Addressed an issue where SMT was not enabled if Enabled Cores per Processor is set to less than 8 cores.

Addressed an issue where certain GPU may encounter lane drop issue with NS204i-u installed.

Addressed an issue where OCP device cannot be disabled by RBSU.

Known Issues:

None]]> Added help text for "Smooth Cooling" RBSU option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Added help text for "Smooth Cooling" RBSU option.

/redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where some GPUs may encounter a PCIe lane drop when an NS204i-u is installed.

Known Issues:

None]]> 1.Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
2. Adding other logging and FW enhancements.

]]> 1.Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
2. Adding other logging and FW enhancements.

]]> サーマルの最大連続動作温度値を最適化します。

]]> Optimize thermal maximum continuous operation temperature values.

]]> This product fixes an issue where Large Send Offload (LSO) is not working.

]]> この製品は、Fortville 9.5およびColumbiaville 4.5のファームウェアとの互換性を強化しました。

]]> This product enhanced the compatibility with firmware of Fortville 9.5 and Columbiaville 4.5.

]]>

このFWPKGからROMフラッシュウェイを削除します。

]]>

Remove ROM flash way from this FWPKG.

]]>

キューのフル処理プロセスでエラーが見つかりました。その結果、FUAビットが適切に設定されず、ドライブの自発的なリセットを発生させる可能性があります。

キューのフル処理プロセスの間にFUAビットの処理を解決するFWの修正が実装されました。

FWは、キューのフル処理状況でドライブがリセットされる問題を解決することが確認されました。

]]>

An error was found in the queue fullhandling process that results in the FUA bit not getting properly set, which could lead to the drive self-initiated reset

The FW fix is to resolve the handling of FUA bit during the queue full handling process has been implemented

The FW was confirmed to resolve the issue of drives resetting under queue full handling situations.

]]> TBD

]]>

この製品は、構成を簡素化するために、Ethernet/LLDPTransmit/ManagementVlanIdプロパティを削除します。

この製品は、BNXTドライバーのコアダンプ機能を強化し、診断を向上させます。

この製品は、よりクリーンなインターフェイスを実現するために、HII MBAメニューを抑制するドライバーのアップデートを強化しています。

]]>

This product removes the Ethernet/LLDPTransmit/ManagementVlanId property to streamline configuration.

This product enhances the coredump feature in the BNXT driver for improved diagnostics.

This product enhances to update the driver to suppress the HII MBA menu for a cleaner interface.

]]>

この製品は、システム内でOCPモジュールのリンク幅が低下する問題を修正します。

この製品は、RDMA接続が確立されない問題を修正します。

この製品は、RoCEおよびTX/RXパスコアダンプのデコードが失敗する問題を修正します。

この製品は、ESXiでポート1がブロードキャストパケットを受信できない問題を修正します。

この製品は、システム内でOCPモジュールのリンク幅が低下する問題を修正します。

この製品は、VLAN構成でPXEブートが機能しない問題を修正します。

]]>

This product fixes the issue where the OCP module experiences link width degradation in the system.

This product fixes the issue where RDMA connections are not getting connected.

This product fixes the issue where RoCE and TX/RX path core dump decoding failed.

This product fixes the issue where Port 1 was not receiving broadcast packets with ESXi.

This product fixes the issue where the OCP module experiences link width degradation in the system.

This product fixes the issue where PXE boot does not work with VLAN configurations.

]]> TBD

]]> この製品は、tg3ドライバーがdmesgで正しいtg3ドライバー名を報告しない問題を修正しました。

]]> This product fix issue where tg3 driver doesn't report correct tg3 driver name in dmesg.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

New features and changes included in version 22.44.1036:

Unified PTP is now supported across different VFs on the same PF.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

New features and changes included in version 22.44.1036:

Unified PTP is now supported across different VFs on the same PF.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> The following issues have been fixed in version 22.44.1036:

Traffic would halt and recovery would be prevented when the emulation doorbell malfunctioned.

]]> The following issues have been fixed in version 22.44.1036:

Traffic would halt and recovery would be prevented when the emulation doorbell malfunctioned.

バージョン22.43.1014には、以下の新機能と変更が含まれます。

VF移行中にCQドアベルが失われた場合に備えて回復手順を追加しました。
eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。この機能は、新しい一般オブジェクトであるRDMA-Telemetryオブジェクトを使用して構成され、次の新しいキャップに依存します。

HCA_CAP.rdma_telemetry_notification_typesおよびHCA_CAP.rdma_telemetry。

拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

ステアリングアクション (STC) の"Jump To Flow"テーブルパラメーターに'table_type_valid'および'table_type'フィールドが追加され、ユーザーがNIC_TXからFDB_TXにジャンプしてACLテーブルをバイパスできるようになりました。
さまざまなユースケースでNICドメインをバイパスすることでホップ削減を可能にしました。このようなアクションにより、大量のフローとデバイスを処理するためのホップ数が削減されます (PPSが向上します)。この新しい機能を有効にするために、テーブルのRX側にジャンプできるようにする新しいSTCアクションタイプ"JUMP_TO_FDB_RX"が追加されました。
LAGにグループ化された複数のE-SwitchにわたるQoSスケジューリングのサポートが追加されました。ある物理機能のVPortメンバーを、別の物理機能からのレートグループに追加することができ、グループのレート制限はそれらのVPortメンバーにも適用されます。
動的フレックスパーサーでサポートされる"ARC-IN"の最大数を1から8に、"ARC-OUT"の最大数を3から8に増やしました。

New features and changes included in version 22.43.1014:

Added a recovery step in case of CQ doorbell getting lost during VF migration.
Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.). The feature is configured using a new general object: RDMA-Telemetry object, and depends on the following new caps:

HCA_CAP.rdma_telemetry_notification_types and HCA_CAP.rdma_telemetry .

Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
Enabled hop reduction by bypassing NIC domain in various use cases. Such action reduces the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
Increased the maximum number of supported "ARC-IN" from 1 to 8 and "ARCOUT" from 3 to 8 for the dynamic flex parser.

]]> 以下の問題点がバージョン22.43.1014で修正されました：

create_sqが無効なmboxを使用した場合、セットアップがクラッシュする。これで、無効なmboxが有効なDBに置き換えられました。
ファームウェアをv22.33.0428以下から22.36.1010以上のバージョンにアップグレードするときに、中間バージョンとしてファームウェアv22.36.1010が必要になるアップグレードの問題。
FACTORYのデフォルトのNV構成値のクエリを修正しました。ファームウェアは常に適用される「次」値を返しました。

]]> The following issues have been fixed in version 22.43.1014:

Setup crash would occur when create_sq used invalid mbox. Now the invalid mbox is replaced with a valid DB.
An upgrade issue that required firmware v22.36.1010 as an intermediate version when upgrading the firmware from v22.33.0428 or below to versions above 22.36.1010.
Fixed the query for FACTORY default NV configuration values. The firmware always returned the "next" value to be applied.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

FW assert fix and other regular maintenance release.

]]>

FW assert fix and other regular maintenance release.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Important Notes:

Firmware Dependencies:

None

Enhancements/New Features:

Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.
Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

Known Issues:

None

]]> Important Notes:

Firmware Dependencies:

None

Enhancements/New Features:

Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.
Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

Known Issues:

None

]]> 重要な注意：

Ver 1.0.4(B)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver 1.0.4と同等です。ファームウェアをバージョン1.0.4にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョン(B)にアップグレードする必要はありません。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

既知の問題点：

なし

]]> Important Notes:

Ver. 1.0.4(B) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.4. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 1.0.4.

Firmware Dependencies:

None

Enhancements/New Features:

Modified the ADC conversion formula based on the new layout design of Gen11 AMD platforms.
Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.

Known Issues:

None

]]>

Updated Version Control

]]>

Updated Version Control

]]>

サポートされる製品をアップデートしました

]]>

Updated supported product

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

このバージョンには、第4世代および第5世代Intel^® Xeon^®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

既知の問題点：

なし

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> ドライバーバージョン5.4.85.0-1
このドライバーは、VMware ESXi 8.0u3でのみサポートされています。

]]> Driver version 5.4.85.0-1
This driver is only supported on VMware ESXi 8.0u3

]]> ドライバーバージョン5.4.83.1
このドライバーは、VMware ESXi 8.0u3でのみサポートされています。

]]> Driver version 5.4.83.1
This driver is only supported on VMware ESXi 8.0u3

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

直接接続されたNVMeファームウェアのフラッシュの表示メッセージを修正し、OSによるFWアクティベーションの結果を揃えます。

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Changes and improvements made in 7500 firmware HPK1 over previous firmware HPK0 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.

]]>

]]> バージョン9.4.11.20にアップデートしました

]]> Updated to version 9.4.11.20

]]> バージョン9.4.11.20にアップデートしました

]]> Updated to version 9.4.11.20

]]> Important Notes:

Ver. 1.2.2(E) contains updates to the firmware packaging and is functionally equivalent to ver. 1.2.2. It is not necessary to upgrade with Revision E if a previous component revision was used to upgrade the firmware to version 1.2.2.

This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00 and later.

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial verison of the firmware.

Known Issues:

None

]]> Important Notes:

This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00 and later.

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial verison of the firmware.

Known Issues:

None

]]> 重要な注意：

Ver 1.2.2(C)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver 1.2.2と同等です。ファームウェアをバージョン1.2.2にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョンCにアップグレードする必要はありません。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

これは、このファームウェアでの最初のバージョンです。

既知の問題点：

なし

]]> Important Notes:

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial verison of the firmware.

Known Issues:

None

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

]]> Initial version.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]>

このFWPKGからROMフラッシュウェイを削除します。

]]>

Remove ROM flash way from this FWPKG.

]]>

This firmware version fixes a bug with the unmap command that may cause a drive hang

]]>

This firmware version fixes a bug with the unmap command that may cause a drive hang

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> See the AMS Release Notes for information about the issues resolved in this release

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Support new Gen 12 servers.

]]>

Support new Gen 12 servers.

]]>

新しいサーバーのサポート

]]>

Support new servers.

]]>

Added supported platforms

]]>

Added supported platforms

]]>

サポート環境をアップデートしました

]]>

Updated Supported Environments

]]>

このFWPKGからROMフラッシュウェイを削除します。

]]>

Remove ROM flash way from this FWPKG.

]]>

この修正は、ホストが読み取りコマンドを発行したときに、ウェアレベリングプロセスの対象ブロックで回復不能なエラーが発生する可能性がある場合に行われます。

]]>

This fix is for unrecovered errors may occur on the targeted Blocks of Wear-leveling process when host issues Read command.

]]>

Updated Supported Environments

]]>

Updated Supported Environments

]]>

インストール前にQATドライバーのアンインストールを追加しました

]]>

Added QAT driver uninstall before installing

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]> Add new support platform.

]]> 今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

]]> See the iSUT Release Notes for information about the issues resolved in this release

]]> 今回のリリースで解決した問題についての情報は、iSUT Release Notesを参照してください。

]]> See the iSUT Release Notes for information about the issues resolved in this release

]]>

Added support for Azure Stack HCI 23H2

]]>

Added support for Azure Stack HCI 23H2

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.

Adding other logging and FW enhancements.

]]>

Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.

Adding other logging and FW enhancements.

]]>

Added support for Azure Stack HCI 23H2

]]>

Added support for Azure Stack HCI 23H2

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Microsoft Windows Server 2025のサポートを追加しました。

]]>

Added support for Microsoft Windows Server 2025.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for Azure Stack HCI 23H2..

]]>

Added support for Azure Stack HCI 23H2..

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> FlexRAN v2.0のIntel BIOS設定に一致するように、'vRAN'ワークロードプロファイルのAMPプリフェッチを無効にしました。

システム構成 (RBSU) オプションの"スムーズな冷却"のヘルプテキストを追加しました。

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア06.01.04.089.0（2.50_04_01_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

OEM顧客向けの"HPE Intelligent Provisioning"のメッセージが正しくない問題に対処しました。

システム構成 (RBSU) -> システム情報でIntel PCHモデル名が不明になる可能性がある問題に対処しました。

Intel VROC搭載のEDSFF SEDドライブを検出できない可能性がある問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]> この製品は現在、Intel E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28 MCLK NGアダプターfor HPEおよび新しいプラットフォームをサポートします。

]]> This product now supports Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK NG Adapter for HPE and new support platform.

]]> TBD

]]> 最初のリリース

]]> Initial release.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Added Support For:

Red Hat Enterprise Linux 10

Updated Driver version 10.02.14.00-k1

]]> Added Support For:

Red Hat Enterprise Linux 10

Updated Driver version 10.02.14.00-k1

]]> ドライバーをバージョン10.02.13.03-k1にアップデートしました

]]> Updated Driver version 10.02.13.03-k1

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]> 新しいプラットフォームのサポートを追加します。

]]> Add new support platform.

]]>

Driver update

Updated supported platforms

]]>

Driver update

Updated supported platforms

]]>

ドライバーアップデート

]]>

Driver update

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]> Added VIRTUALIZATION Parameter

]]>

MR408i-p Gen11コントローラーのサポートを追加

]]>

Add support for MR408i-p Gen11 controller

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

Support Azure Stack HCI 23H2 OS.

Support new Gen12 servers.

]]>

Support Azure Stack HCI 23H2 OS.

Support new Gen12 servers.

]]>

Azure Stack HCI 23H2 OSをサポートします。

新しいGen12 サーバーをサポートします。

]]>

Support Azure Stack HCI 23H2 OS.

Support new Gen12 servers.

]]>

Added support for RHEL10.

]]>

Added support for RHEL10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> .

The following fixes were incorporated in this version:

Code optimization to save memory repo.
TLB exception seen while doing esp reset when expander reset was in progress.
Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.
Added whole new Delta PS-pmbus code , Updated the ESP version number.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]> .

The following fixes were incorporated in this version:

Code optimization to save memory repo.
TLB exception seen while doing esp reset when expander reset was in progress.
Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.
Added whole new Delta PS-pmbus code , Updated the ESP version number.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> SR 2.9.2/SR 3.4.2 RC

]]>

Fixed an issue where the driver incorrectly handled multi-path failover.

Fixed an issue where the driver could hang under heavy I/O load.

]]>

Fixed an issue where the driver incorrectly handled multi-path failover.

Fixed an issue where the driver could hang under heavy I/O load.

]]>

Updated supported platforms

]]>

Updated supported platforms

]]>

サポートされるプラットフォームをアップデートしました

]]>

Updated supported platforms

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> このパッケージでは、SuSE Linux Enterprise Server（SLES）ディストリビューションのみがサポートされています

このコンポーネントはFIPSが有効になっています。

]]> This package supports only SuSE Linux Enterprise Server(SLES) Distros.

This Component is FIPs enabled.

]]> このコンポーネントはFIPSが有効になっています。

]]> This Component is FIPs enabled.

]]> このパッケージでは、SuSE Linux Enterprise Server（SLES）ディストリビューションのみがサポートされています

このコンポーネントはFIPSが有効になっています。

]]> This package supports only SuSE Linux Enterprise Server(SLES) Distros.

This Component is FIPs enabled.

]]> このコンポーネントはFIPSが有効になっています。

]]> This Component is FIPs enabled.

]]>

Updated supported environments

]]>

Updated supported environments

]]> 最初のリリース

]]> Initial release.

]]> バージョン28.44.1036には、以下の新機能と変更が含まれます。

NIC輻輳時にPause/PFCフレームの送信を遅延させるために、RXロスレスバッファーサイズを増やしました。
1Gリンク速度でのSyncEのサポートが追加されました。
並列処理を強化するために、割り当てフローと割り当て解除フローの新しいメカニズムを追加しました。
マルチホスト展開を使用する場合、各ホストには固有のポートとPFが割り当てられ、独自のLAGを管理します。
PCIeスイッチ構成のセットアップでfwresetを実行するためのツールとドライバーを含む新しい同期フローのサポートが追加されました。
同じPF上の異なるVF間で統合PTPがサポートされるようになりました。
新しいMADのサポートが追加されました: PortRecoveryPolicyConfigおよび PortRecoveryPolicyCounters 。PHY回復プロセス中、ファームウェアコアはport_logical_stateをActiveとして示します。
新しいNV構成 (SM_DISABLE、デフォルト0) が追加されました。これを有効にすると、SMから発信されていないSMPトラフィックがブロックされます。
PFCCアクセスレジスターのパラメーターとしてケーブル長を設定する機能を追加しました。ケーブルの長さは、サイズ、Xoff、Xon しきい値などの RXロスレスバッファーパラメーターの計算に使用されます。

]]> New features and changes included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added support for SyncE at 1G link speed.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> The following issues have been fixed in version 28.44.1036(A):

Improper device type in the adapter metadata resulted in the product not listing as expected on HPE.com for all supported environments.

The following issues have been fixed in version 28.44.1036:

Cable info semaphore deadlock.
Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
Enabling PCC NP and setting the link type to one port as IB and the other as Ethernet could cause an assert to appear in dmesg with ext_synd 0x8309.

]]> The following issues have been fixed in version 28.44.1036(A):

Improper device type in the adapter metadata resulted in the product not listing as expected on HPE.com for all supported environments.

The following issues have been fixed in version 28.44.1036:

Cable info semaphore deadlock.
Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
Enabling PCC NP and setting the link type to one port as IB and the other as Ethernet could cause an assert to appear in dmesg with ext_synd 0x8309.

]]> バージョン28.44.1036には、以下の新機能と変更が含まれます。

NIC輻輳時にPause/PFCフレームの送信を遅延させるために、RXロスレスバッファーサイズを増やしました。
1Gリンク速度でのSyncEのサポートが追加されました。
並列処理を強化するために、割り当てフローと割り当て解除フローの新しいメカニズムを追加しました。
マルチホスト展開を使用する場合、各ホストには固有のポートとPFが割り当てられ、独自のLAGを管理します。
PCIeスイッチ構成のセットアップでfwresetを実行するためのツールとドライバーを含む新しい同期フローのサポートが追加されました。
同じPF上の異なるVF間で統合PTPがサポートされるようになりました。
新しいMADのサポートが追加されました: PortRecoveryPolicyConfigおよび PortRecoveryPolicyCounters 。PHY回復プロセス中、ファームウェアコアはport_logical_stateをActiveとして示します。
新しいNV構成 (SM_DISABLE、デフォルト0) が追加されました。これを有効にすると、SMから発信されていないSMPトラフィックがブロックされます。
PFCCアクセスレジスターのパラメーターとしてケーブル長を設定する機能を追加しました。ケーブルの長さは、サイズ、Xoff、Xon しきい値などの RXロスレスバッファーパラメーターの計算に使用されます。

]]> New features and changes included in version 28.44.1036:

Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
Added support for SyncE at 1G link speed.
Added a new mechanism for allocations and deallocations flows to enhance parallelism.
When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
Unified PTP is now supported across different VFs on the same PF.
Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the port_logical_state as Active.
Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.

]]> 以下の問題点がバージョン28.44.1036で修正されました。

ケーブル情報セマフォのデッドロック。
TLV完全リストのエラー処理が不適切だったため、TLVメカニズムがハングしました。
SPDM GET_CERTIFICATE操作は、すべての証明書チェーンのオフセットとチャンクサイズをサポートしていませんでした。
VDPAにおける問題で、virtqがmkeyなしで作成された場合、またはライブマイグレーション中に人を介さずマッピングされたmkeyで作成された場合、virtqを破棄するとext_synd=0x8f33でヘルスバッファー症候群が発生します。
VDPA機能ビットGUEST_TSO4およびGUEST_TSO6が予期せずデフォルトで設定され、トラフィックの中断が発生しました。
PCC NPを有効にし、リンクタイプを1つのポートにIB、もう1つのポートにEthernetを設定すると、dmesgにext_synd 0x8309のアサートが表示される可能性があります。

]]> The following issues have been fixed in version 28.44.1036:

Cable info semaphore deadlock.
Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
Enabling PCC NP and setting the link type to one port as IB and the other as Ethernet could cause an assert to appear in dmesg with ext_synd 0x8309.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> No changes or new features have been included in version 20.43.2026.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

]]> The following issues have been fixed in version 20.43.2026:

A linkup issue vs a 3rd party switch (BCM53405).
A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.

バージョン20.43.1014には、以下の新機能と変更が含まれます。

eSwitchマネージャーごとに選択されたすべての機能でエラーCQEイベントを示すオプションが追加されました。この表示は、エラーに関する関連情報 (シンドローム、function_id、タイムスタンプ、QP番号など) を含む新しいWQEとして定義されます。
拡張カーネルロックダウン権限セット。新しいHCA機能ビットマスクフィールドtool_partial_capを使用して、ツール (権限TOOLS_RESORCES) によって次のサブ操作を呼び出すことができるようになりました。

5つのサブ操作は次のとおりです。

QUERY_HCA_CAPと他の機能
QUERY_VUIDと直接データ
QUERY_ROCE_ADDRESSと他のvport
SET_HCA_CAPと他の機能
POSTPONE_CONNECTED_QP_TIMEOUTと他のvport

新しく追加された機能は次のとおりです。

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

New features and changes included in version 20.43.1014:

Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

The 5 sub-operations are:

QUERY_HCA_CAP with other function
QUERY_VUID with direct data
QUERY_ROCE_ADDRESS with other vport
SET_HCA_CAP with other function
POSTPONE_CONNECTED_QP_TIMEOUT with other vport

The new added caps are:

tool_partial_cap.postpone_conn_qp_timeout_other_vport,
tool_partial_cap.set_hca_cap_other_func
tool_partial_cap.query_roce_addr_other_vport
tool_partial_cap.query_vuid_direct_data
tool_partial_cap.query_hca_cap_other_func

]]> 以下の問題点がバージョン20.43.1014で修正されました：

"create_sq"が無効なmboxを使用した場合、セットアップがクラッシュする。
FACTORYデフォルトのNV構成値を照会するとき、ファームウェアは常に、適用される"次の"値を返す。

]]> The following issues have been fixed in version 20.43.1014:

Setup crash when "create_sq" used invalid mbox.
The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.

]]> TBD

]]>

この製品は、RSSコードが256個を超えるCPUコアを持つシステムをサポートできるように強化されています。

この製品は、1G接続でのWake-on-LANをサポートするように強化されています。

]]>

This product enhances to enable RSS code to support systems with more than 256 CPU cores.

This product enhances to support Wake-on-LAN with 1G connection.

]]>

PLDMベース (タイプ 0) コマンドは、PLDM ベース仕様 (DSP0240) の v1.2.0 に準拠しています。

PLDM プラットフォーム監視および制御 (タイプ 2) コマンドは、PLDMプラットフォーム監視および制御仕様 (DSP0248) のv1.3.0に準拠しています。

RedfishおよびストレージリソースRDEアクション操作を使用したボリュームの作成/削除の長期実行タスクのサポート。

]]>

PLDM Base (Type 0) commands comply with v1.2.0 of the PLDM base specification (DSP0240).

PLDM Platform Monitoring and Control (Type 2) commands comply with v1.3.0 of the PLDM Platform Monitoring and Control Specification (DSP0248).

Long-running task support for volume creation/deletion using Redfish and storage resource RDE action operations.

]]>

RAID 0予測スペア再構築(PSR)の開始時にロックアップが発生することがある問題を修正しました。

交換したSSDドライブの再構築プロセス中に障害LEDが点灯したままになる問題を修正しました。

PFドライブ上に論理ドライブを作成した後、ホストが新しい構成のアップデートを取得できない問題を修正しました。

再起動前にデータドライブがその他の所有者のSEDドライブに置き換えられた場合、セキュリティ保護されたボリュームの論理ボリュームステータスが誤ってOKと報告される問題を修正しました。

工場出荷時の状態にリセットした後、表面スキャン期間がデフォルトにリセットされない問題を修正しました。

予測スペア再構築 (PSR) が完了した後でも予測障害ドライブが障害にならない問題を修正しました。

JBOD電源サイクル後にコントローラーがロックアップする可能性がある問題を修正しました。

スペア再構築中に故障したドライブをオフラインで交換すると、交換ドライブが故障する問題を修正しました。

突然のシャットダウンを伴う変換中とその後の起動時の両方で発生する可能性のあるロックアップの問題を修正しました。

特定の構成でのAC電源サイクルテスト中に断続的に発生するMCTP通信の問題を修正しました。

AMD Turin 2P構成におけるMCTP通信の問題を修正しました。

エキスパンダーが接続されたSATAドライブでタイムアウトが発生したときに発生する可能性のあるロックアップの問題を修正しました。

セキュア消去コマンドの不適切なサポートチェックに関する問題を修正しました。

HII論理ドライブ情報にアクティブな専用ホットスペアメンバーが見つからない問題と、HIIディスクユーティリティの論理ドライブのドライブ部分に障害が発生する問題を修正しました。

アダプターパスワードを待機しているコントローラーでアレイを作成するときに、間違ったエラーコード「InternalError」が送られる問題を修正しました。

エンクロージャーにドライブが接続されていない状態でサーバーの電源がオンになった場合の問題を修正しました。iLOのストレージタブとRedfishで不正なコントローラー情報を確認

RedfishのストレージURIでエンクロージャーリンクが見つからない問題を修正しました。

空のベイのドライブリソースがシャーシと一致しない問題を修正しました。

サニタイズ消去操作の進行中にドライブの誤った重大度の警告が表示される問題を修正しました。

通常の状態でHealthRollupが警告を表示する問題を修正しました。

WriteCacheが劣化しているときにCacheSummary.Status.Healthが正しく表示されない問題を修正しました。

アレイの削除中にPLDM/RDE読み取りに6秒以上かかることがある問題を修正しました。

]]>

Fixed an issue where a lockup occasionally occurs when RAID 0 Predictive Spare Rebuilding (PSR) starts.

Fixed an issue where the fault LED remains lit during the rebuild process of a replaced SSD drive.

Fixed an issue where the host was unable to retrieve new configuration updates after creating a logical drive on PF drives.

Fixed an issue where the logical volume status was incorrectly reported as OK on a secured volume if a data drive was replaced with an Otherwise Owned SED drive before reboot.

Fixed an issue where the surface scan period was not reset to default after factory reset.

Fixed an issue where the predictive failure drive did not fail even after the Predictive Spare Rebuild (PSR) was completed.

Fixed an issue where the Controller might have a potential lockup after a JBOD power cycle.

Fixed an issue where the offline replacement of a failed drive during a spare rebuild led to the failure of the replacement drive.

Fixed a lockup issue that could occur both during a transformation with an abrupt shutdown, and on subsequent bootup.

Fixed an intermittent MCTP communication issue during AC power cycle tests on specific configurations.

Fixed an MCTP communication issue in AMD Turin 2P configurations.

Fixed a lockup issue that could occur when a timeout occurs with expander attached SATA drives.

Fixed an issue with improper support checking for the secure erase command.

Fixed issues for missing active dedicated hot spare member in HII logical drive information and failed drive part of a logical drive in the HII disk utilities.

Fixed an issue which threw wrong error code, 'InternalError’ when creating an array on controller that is waiting on adapter password.

Fixed an issue When server is powered on with no drives connected to Enclosure. Observe incorrect controller information in iLO Storage tab & Redfish

Fixed an issue that enclosures Link is missing under Storage URI in Redfish.

Fixed an issue in which drive resource does not match with Chassis for empty bay.

Fixed an issue in which incorrect severity warning of drive when sanitize erase operation is in progress.

Fixed an issue where HealthRollup shows warning during normal state.

Fixed an issue where CacheSummary.Status.Health shows incorrect during WriteCache degraded.

Fixed an issue in which PLDM/RDE Read sometimes take longer than 6s during array deletion.

]]> SR 2.9.2 パッチ 1

]]> SR 2.9.2 patch 1

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]>

This product fixes an issue where the speed may be downgraded to Gen3.

This product fixes an issue where the Linux driver fails to load due to an EEPROM checksum error when the RDE:MACAddress property is patched.

This product fixes an issue where the NIC is not detected after performing the RDE patch operation on NetworkDeviceFunctions settings.

This product fixes an issue where the RDE: Setting property (AutoSpeedNegotiationEnabled) does not cause the property value to update, returning a code 400.

This product fixes an issue where the RDE fails to perform the get operation when the adapter is configured as pass-through.

This product fixes an issue where the RDE property (FlowControlStatus) does not report the correct status after the RDE property FlowControlConfiguration is set to Tx.

This product fixes an issue where the RDE patch operation fails on the AutoSpeedNegotiationEnabled property.

]]> 新しいプラットフォームのサポートを追加します。

]]> Add new support platform.

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

Fixes Maximum Temperature Reporting in system log.

]]>

Fixes Maximum Temperature Reporting in system log.

]]> TBD

]]> この製品では、新しいGen11サーバーのサポートを追加しました。

]]> This product added support to new Gen11 servers.

]]> Support new Gen12 servers.

]]> 新しいML110およびDL560 Gen11サーバーのサポート

]]> Support new ML110 and DL560 Gen11 servers

]]>

Added support for RHEL 10.

]]>

Added support for RHEL 10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> This product enhanced the compatibility with the latest drivers.

]]>

This product now supports Azure Stack HCI OS.

]]>

This product now supports Azure Stack HCI OS.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

Introduced an enhancement to prevent potential system shutdowns caused by specific CPU temperature errors.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]>

Added support for RHEL10.

]]>

Added support for RHEL10.

]]>

SDR方式によるフラッシュの問題を修正しました

]]>

Fixed flashing issue through SDR method

]]> Initial release version.

]]> 最初のリリースバージョンです。

]]> Initial release version.

]]>

このFWPKGからROMフラッシュウェイを削除します。

]]>

Remove ROM flash way from this FWPKG.

]]>

This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions..

]]> TBD

]]>

この製品は、NXEファミリデバイスの一貫したPTPクロックのレポートを強化します。

この製品は、必要なPNP IDを追加することでデバイスの互換性を強化します。

]]>

This product enhances the reporting of a consistent PTP clock for NXE family devices.

This product enhances device compatibility by adding the necessary PNP ID.

]]> この製品は、未使用のrelease.txtファイルが削除されない問題を修正します。

]]> This product fixes the issue where an unused release.txt file was not removed.

]]>

Azure Stack HCI 23H2のサポートを追加しました

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors. This version is in compliance with IPU 2025.2 guidance.

Known Issues:

None

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題点:

このバージョンには、第4世代および第5世代Intel^® Xeon^®スケーラブルプロセッサー用の最新のServer Platform Servicesファームウェアが含まれています。

既知の問題点：

なし

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This version contains the latest Server Platform Services firmware for 4th and 5th Generation Intel^® Xeon^® Scalable Processors.

Known Issues:

None

]]> This Firmware package contains following firmware versions:

Adapter	Speed	Universal Boot Image	Firmware	UEFI	Boot Bios
HPE SN1620E 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	14.4.473.24	14.4.473.24	14.4.473.8	14.4.469.0
HPE SN1720E 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	14.4.473.24	14.4.473.24	14.4.473.8	14.4.469.0

]]> This Firmware package contains following firmware versions:

Adapter	Speed	Universal Boot Image	Firmware	UEFI	Boot Bios
HPE SN1620E 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	14.4.473.24	14.4.473.24	14.4.473.8	14.4.469.0
HPE SN1720E 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	14.4.473.24	14.4.473.24	14.4.473.8	14.4.469.0

]]> このファームウェアパッケージには、以下のファームウェアバージョンが含まれています。

アダプター	速度	Universal Boot Image	ファームウェア	UEFI	ブートBIOS
HPE SN1620E 32Gbデュアルポートファイバーチャネルホストバスアダプター	32Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0
HPE SN1720E 64Gbデュアルポートファイバーチャネルホストバスアダプター	64Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0

]]> This Firmware package contains following firmware versions:

Adapter	Speed	Universal Boot Image	Firmware	UEFI	Boot Bios
HPE SN1620E 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0
HPE SN1720E 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	14.4.473.14	14.4.473.14	14.4.473.8	14.4.469.0

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel IPU 2025.2 updates.

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS Settings for FlexRAN v2.0.

Added help text for "Smooth Cooling" in system configuration (RBSU) option.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the Name field of the Logical Drive under MR controller page might be missing or changed unintentionally after exiting and going back to the MR controller page.

Addressed an issue where the messages of "HPE Intelligent Provisioning" is incorrect for OEM customers.

Addressed an issue where the Intel PCH model name might be unknown in system configuration (RBSU) -> System information.

Addressed an issue where the system might fail to detect EDSFF SED drives with Intel VROC.

Known Issues:

None]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]>

新しいGen12 サーバーをサポートします。

]]>

Support new Gen12 servers.

]]> The following new features and changes have been included in version 25.01-0.6.0.1

[ConnectX-7] Multi-host LAG: When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Hardware GRO: Hardware Generic Receive Offload (GRO) reduces CPU overhead and improves throughput by offloading the task of reassembling incoming network packets from the CPU.
Precision Time Measurement (PTM): Precision Time Measurement (PTM) enhances clock synchronization accuracy between the NIC's hardware clock and the system's host clock. It addresses inaccuracies caused by asymmetric PCIe request and response times, which can affect PTP.
Transport RDMA Steering Domain: Transport RDMA steering domain in the kernel allows users to create steering tables and rules using the new domain types FS_FT_RDMA_TRANSPORT_RX and FS_FT_RDMA_TRANSPORT_TX, with support for both DevX commands and the added functionality in mlx5dv_create_flow_matcher().
DevX QPs Parallel Cleanup: Reduces cleanup (kill) time of user-space applications that use DevX QPs, without requiring any changes on the user's end. When using a kernel that includes this patch, DevX QP destruction upon cleanup will be sent to the firmware in parallel, rather than serially as before, resulting in faster cleanup times. The more DevX QPs the application has, the more noticeable the improvement will be.
Flow Control for Solicited MADs: Implements flow control for solicited MADs in the MAD layer to prevent loss due to insufficient resources at the receiver. Both the client and server function as receivers: the server handles incoming requests, while the client receives the responses.
Increased the default TX queue length in IPoIB to enhance qdisc queueing and reduce CPU spikes.
The "--defltprio" flag has been deprecated and removed from the mlnx_qos tool.

]]> The following new features and changes have been included in version 25.01-0.6.0.1

[ConnectX-7] Multi-host LAG: When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
Hardware GRO: Hardware Generic Receive Offload (GRO) reduces CPU overhead and improves throughput by offloading the task of reassembling incoming network packets from the CPU.
Precision Time Measurement (PTM): Precision Time Measurement (PTM) enhances clock synchronization accuracy between the NIC's hardware clock and the system's host clock. It addresses inaccuracies caused by asymmetric PCIe request and response times, which can affect PTP.
Transport RDMA Steering Domain: Transport RDMA steering domain in the kernel allows users to create steering tables and rules using the new domain types FS_FT_RDMA_TRANSPORT_RX and FS_FT_RDMA_TRANSPORT_TX, with support for both DevX commands and the added functionality in mlx5dv_create_flow_matcher().
DevX QPs Parallel Cleanup: Reduces cleanup (kill) time of user-space applications that use DevX QPs, without requiring any changes on the user's end. When using a kernel that includes this patch, DevX QP destruction upon cleanup will be sent to the firmware in parallel, rather than serially as before, resulting in faster cleanup times. The more DevX QPs the application has, the more noticeable the improvement will be.
Flow Control for Solicited MADs: Implements flow control for solicited MADs in the MAD layer to prevent loss due to insufficient resources at the receiver. Both the client and server function as receivers: the server handles incoming requests, while the client receives the responses.
Increased the default TX queue length in IPoIB to enhance qdisc queueing and reduce CPU spikes.
The "--defltprio" flag has been deprecated and removed from the mlnx_qos tool.

]]> The following issues have been fixed in version 25.01-0.6.0.1:

Incorrect SA switching when multiple active TX SAs are created on a SC, caused by failing to respect the SA configured by "encoding_sa".
Incorrect receive queue cache size calculation.

]]> The following issues have been fixed in version 25.01-0.6.0.1:

Incorrect SA switching when multiple active TX SAs are created on a SC, caused by failing to respect the SA configured by "encoding_sa".
Incorrect receive queue cache size calculation.

]]> バージョン24.10-0.7.0.1には、次の新機能と変更が含まれています。

[ベータ] LAGにグループ化された複数のE-SwitchにわたるQoSスケジューリングのサポートが追加されました。ある物理機能のVPortメンバーを、別の物理機能からのレートグループに追加することができ、グループのレート制限はそれらのVPortメンバーにも適用されます。
ユーザースペースからRDMAイベントを監視するためのカーネルサポートが追加されました。netlinkまたはRDMAツールを使用すると、ユーザーはデバイスの登録、デバイスの登録解除、netdevの接続/切断などのInfiniBandデバイスのイベントと変更を監視できます。
SFとそのIRQのマッピングに関する情報をユーザーに提供するために、SF sysfsディレクトリ内に"irqs"ディレクトリを追加しました。
SFの完了EQの最大数を設定するためのサポートが追加されました。
create_cqフローのuar_page_indexに対する最大23ビットのサポートが追加されました。これにより、ユーザーは、ハードウェア/ファームウェアでサポートされている2^16より大きいuar_page_indexを使用してcreate_cqを実行できるようになります。
[ベータ] devlink-rate APIのトラフィッククラス (TC) 間の帯域幅比率を指定するためのサポートが追加されました。この新しいオプションにより、ユーザーは単一のコマンドで複数のトラフィッククラスにわたって帯域幅を割り当てることができます。この機能により、特に拡張伝送選択を必要とするシナリオにおいて、トラフィック管理をより細かく制御できるようになります。ユーザーは、TC0 (TCP/UDP) に20%、TC5 (RoCE) に80%を割り当てるなど、トラフィッククラスごとに特定の帯域幅のシェアを定義できるようになりました。

]]> The following new features and changes have been included in version 24.10-0.7.0.1:

[Beta] Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
Added kernel support for monitoring RDMA events from userspace. Using the netlink or the RDMA tool, users will be able to monitor the InfiniBand device events and changes such as device register, device unregister and netdev attachment/detachment.
Added the “irqs” directory inside the SF sysfs directory to provide the users information about the mapping of SFs and their IRQs.
Added support for setting a maximum number of completion EQs for SFs.
Added support for up to 23 bits for uar_page_index in create_cq flow. This allows the user to perform create_cq with a uar_page_index larger than 2^16 as supported by the hardware/firmware.
[Beta] Added support for specifying bandwidth proportions between traffic classes (TC) in the devlink-rate API. This new option allows users to allocate bandwidth across multiple traffic classes in a single command. This feature provides a more granular control over traffic management, especially for scenarios requiring Enhanced Transmission Selection. Users can now define a specific bandwidth share for each traffic class, such as allocating 20% for TC0 (TCP/UDP) and 80% for TC5 (RoCE).

]]> 以下の問題点がバージョン24.10-0.7.0.1で修正されました。

udevルールの構文に、次のエラーメッセージをトリガーする無効な行が含まれていました。"/usr/lib/udev/rules.d/90-ib.rules:4 Only network interfaces can be renamed"。
rdma-coreの次のシンボルの問題による"rdma-core"のビルドの失敗：1) mad_register_port_client()シンボルをエクスポートする必要がなかった 2) XDR速度デコード関数が適切にエクスポートされなかった。
イニシエーター/レスポンダーの深度を12に設定しようとすると、ドライバーは実際には深度を8 (2の累乗を切り捨て) に設定し、RDMA読み取り要求が行われたときにユーザーはRDMA NAKを受信した。

]]> The following issues have been fixed in version 24.10-0.7.0.1:

The udev rule included an invalid line in its syntax that triggered the error message: "/usr/lib/udev/rules.d/90-ib.rules:4 Only network interfaces can be renamed".
"rdma-core" build failure due to the following symbol issues in rdma-core: 1) mad_register_port_client() symbol did not need to be exported 2) The XDR speed decoding functions were not properly exported.
When trying to configure the initiator/responder depth to 12, the driver actually configured the depth to 8 (power of 2 rounded down), and the user received an RDMA NAK when RDMA read requests were posted.

]]>