RC drop 6.60.8.0.

]]> RC drop 6.60.8.0.

]]>

Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels.

Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present.

Fixed an issue where a foreign-owned SED drive was being listed for array creation.

Fixed an issue where the last failure reason was not listing on physical drives.

Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode.

Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume.

Fixed an issue where a duplicate entry for the physical drive was displayed.

]]>

Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels.

Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present.

Fixed an issue where a foreign-owned SED drive was being listed for array creation.

Fixed an issue where the last failure reason was not listing on physical drives.

Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode.

Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume.

Fixed an issue where a duplicate entry for the physical drive was displayed.

]]> This version is in compliance with IPU 2026.1 guidance.

Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

]]> This version is in compliance with IPU 2026.1 guidance.

Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

Known Issues:

None]]> Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

]]> Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

Known Issues:

None

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

Known Issues:

None

]]>

Added support for Azure Local 24H2.

]]>

Added support for Azure Local 24H2.

]]>

Azure Stack HCI 23H2のサポートを追加しました

]]>

Added support for Azure Stack HCI 23H2.

]]>

Added support for SLES16.

]]>

Added support for SLES16.

]]>

RHEL 10のサポートを追加しました。

]]>

Added support for RHEL 10.

]]> このバージョンでは、以下の機能強化が追加されています。

RHEL 8.7のサポートを追加
RHEL 9.1のサポートを追加
SLES15 SP4のサポートを追加

]]> The following enhancement has been added in this version:

Added support of RHEL 8.7
Added support ofRHEL 9.1
Added support of SLES15 SP4

]]> 以下の修正がこのバージョンに含まれました：

gSEPモデルとSESデータベース内の温度センサーロジック
IOMが引き出されたときに、残っているIOMが正しくない異常温度を報告する

このファームウェアに関する修正のリスト、拡張、既知の問題および回避方法については、リリースノートを参照してください。

]]> The following fixes were incorporated in this version:

Temperature sensors logic inside gSEP model and SES database
When an IOM is pulled the surviving IOM reports false critical temperatures

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]> このバージョンでは、以下の機能強化が追加されています。

Rhel 7.8のサポートを追加しました
Rhel 8.2のサポートを追加しました
SLES15 SP2のサポートを追加しました

]]> The following enhancement has been added in this version:

Added support of Rhel 7.8
Added support of Rhel 8.2
Added support of SLES15 SP2

]]> 以下の修正がこのリリースに含まれました:

gSEPモデルとSESデータベース内の温度センサーロジック
IOMが引き出されたときに、残っているIOMが正しくない異常温度を報告する

このファームウェアに関する修正のリスト、拡張、既知の問題および回避方法については、リリースノートを参照してください。

]]> The following fixes were incorporated in this version:

Temperature sensors logic inside gSEP model and SES database
When an IOM is pulled the surviving IOM reports false critical temperatures

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]> New features and changes included in version 16.35.8002:

Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> New features and changes included in version 16.35.8002:

Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> The following issues have been fixed in version 16.35.8002:

Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.

]]> The following issues have been fixed in version 16.35.8002:

Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.

]]> 重要：セキュリティ強化の機能改善 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能改善が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのバージョンにアップグレードすることを推奨します。

バージョン16.35.4506には、以下の新機能と変更が含まれます。

MLNX OEM CMD 0x0032 (デバッグ情報の取得) に、4バイト境界となるようにアドレス検証を追加しました。

]]> Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

New features and changes included in version 16.35.4506:

Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.

]]> 以下の問題点がバージョン16.35.4506で修正されました。

GLOBAL一時停止機能が無効になっている場合、不正なMPLSパケット破棄フローが発生していました。

]]> The following issues have been fixed in version 16.35.4506:

Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.

]]> For Jan 2026

]]>

SSD寿命の監視を追加しました。

Drive.ResetおよびStorage.SetEncryptionKeyを含むすべてのRDE ACTION操作に特権操作トークンを要求するサポートが追加され、データ破壊アクションのセキュリティが向上しました。

数値センサーPDRに意味のあるアップデート間隔値を提供するためのサポートが追加されました。コントローラー温度の場合は5秒、ドライブ温度センサーの場合は60秒に設定します。

ボリューム機能のCapacityBytes@Redfish.AllowableNumbersの計算が強化されました。最大許容値は、(a) 既存のアレイ上の最大空き領域範囲、または (b) 共通のインターフェースとメディアタイプを持つ未割り当てドライブの合計のうち大きい方に設定されます。

スキーマバージョンを1.0.0から1.2.0にアップデートし、ReadIOKiBytesおよびWriteIOKiBytesプロパティのレポートを追加することで、DriveMetricsのサポートが強化されました。

ディスク情報メニューでドライブのベンダー名とモデル名を個別のフィールドとして表示する機能強化が追加され、ドライブの識別が明確になり、容易になりました。

リモートキー管理モードで暗号化キーを安全に転送するためのサポートが追加されました。

HIIでのドライブ書き込みキャッシュステータスレポートが強化されました。

]]>

Added SSD life expectancy monitoring.

Added support to require privileged operations token for all RDE ACTION operations, including Drive.Reset and Storage.SetEncryptionKey, improving security for data-destructive actions.

Added support to provide meaningful updateInterval values for Numeric Sensor PDRs, setting 5 seconds for controller temperature and 60 seconds for drive temperature sensors.

Enhanced the calculation of CapacityBytes@Redfish.AllowableNumbers for Volume Capabilities. The maximum allowable value is now set to the larger of (a) the largest free space range on any existing array, or (b) the sum of unassigned drives with a common interface and media type.

Enhanced DriveMetrics support by updating the schema version from 1.0.0 to 1.2.0, adding reporting for ReadIOKiBytes and WriteIOKiBytes properties.

Added an enhancement to display drive vendor and model name as separate fields in the Disk Information menu, improving clarity and ease of drive identification.

Added support to securely transfer encryption keys in remote key management mode.

Enhanced drive writes cache status reporting in HII.

]]>

コントローラーの再起動後に、所有フラグがデータストアに保存されていないために SED が外部に戻ってしまう問題を修正しました。

論理ドライブの再構築中に障害が発生したドライブを処理するときに、NULL ポインタ参照が原因で NDSR (非中断型ソフトウェアリセット) 中にファームウェアがクラッシュ/ロックアップする問題を修正しました。

誤った障害処理により 4Kn 外部 SED が 512B 論理ドライブにインポートされ、互換性のないドライブで再構築が開始され、最終的に失敗する可能性がある問題を修正しました。

キューされた変換および再構築プロセス中に再構築ステータスが適切にアップデートされないため、複数の論理ドライブが同時に誤って「REBUILDING」と表示される問題を修正しました。

LU キャッシュフラッシュ要求がパスワードアップデートプロセスと競合するため、管理対象 SED 論理ドライブでマスターキーの変更が失敗する問題を修正しました。

物理ドライブの予測障害ステータスがツールおよび iLO によって正しく報告されない問題を修正しました。

マップされていない論理ドライブ領域で回復不可能な読み取りエラー (URE) を処理するときに、古い内部リソースが原因で表面スキャン中にコントローラーがロックアップする問題を修正しました。

初期化前にキャッシュがアクセスされたために、起動時に修正不可能なDDR ECCエラーが報告される可能性がある問題を修正しました。

フラッディングされたBMC要求からの重複したルーティングエントリーが原因でMCPを有効にするとコントローラーがロックアップする (0x3120C) 問題を修正しました。

ベンダー指定のTTR値に合わせてダンプタイマーを調整することにより、スピンアップ中にSATAドライブがホットリムーブされたと誤って報告される可能性がある問題を修正しました。

LUNリセットと同時に構成の変更が発生した場合、I/Oワークロードが高いときにコントローラーがロックアップする (0x1E30) 可能性がある問題を修正しました。

予測スペア再構築中に RAID 0がI/OタイムアウトとLUNリセットでハングする可能性がある問題を修正しました。

RAIDコントローラーがオンラインファームウェアアクティベーションを誤って有効であると報告する可能性がある問題を修正しました。ファームウェアは、PQI初期化中にサポートをチェックし、それに応じて機能フラグを設定またはクリアするようになりました。

エンクロージャが準備完了になるまで追加のSCSI準備完了ステータスコードの処理を追加することにより、エンクロージャの電源がオンになってホットプラグされた後に、一部のエンクロージャ内のドライブがベイ番号 255 を表示する可能性がある問題を修正しました。

TCG復帰プロセス中にタイムアウトが不十分なためにMicron 6550 SEDドライブがセキュアボリュームを作成できない問題を修正しました。

レポートロジックを同期することにより、PLDM PDRからのコントローラーのヘルス状態がRDEの Storage.Status.HealthRollup値と異なる可能性がある問題を修正しました。

SCSIパススルー操作の前にチェック条件をクリアするためにTest Unit Readyコマンドを送信することにより、PLDMエラーが原因でデュアルパス構成でSSDファームウェアのアップデートが失敗する可能性がある問題を修正しました。

Battery Redfish アラートに、バッテリーリソースではなくStorageControllerを指す誤った OriginOfCondition が含まれていた問題を修正しました。

キャッシュアップデートロジックを調整して、キャッシュの状態に関係なく正確な結果を返すことにより、CBEキー再生成中にボリュームのReadCachePolicyに対するRDE UPDATE操作が誤って成功したように見える問題を修正しました。

有効な値のみが表示されるように構成チェックを追加することで、専用スペアを持つ RAID 0ボリュームのHotspareActivationPolicy許容値にOnDriveFailureが誤って含まれていた問題を修正しました。

RPI中に全体的なヘルス状態と論理ボリューム状態に不一致があり、RDE READ (論理ボリューム状態) がOKを示しているのにセンサーが警告 (全体的なヘルス) を報告する問題を修正しました。RPI中に OKを報告することは想定された動作です。

オプションを公開する前に電源を接続して完全に充電する必要があるため、バックアップ電源がない場合でも、ProtectedWriteBackがRDE READで許容されるWriteCachePolicyとして誤って表示される可能性がある問題を修正しました。

ファームウェアAPIに境界チェックを追加することで、サポートされていない特定のドライブリソースに対するRDE READによってコントローラーがロックアップする可能性がある問題を修正しました。

他のPLDMコマンドが同時に送信された場合に PLDMタイプ6を介してボリュームを削除するとコントローラーがロックアップする可能性がある問題を修正しました。これらのコマンドは、長時間実行されるRDE操作の進行中にNOT_READYを返すようになりました。

コントローラーが提供する有効な情報のみが表示されるようにすることで、代替パスにフェイルオーバーした後にディスクユーティリティがドライブの無効なボックス番号を表示する可能性がある問題を修正しました。

ロックされたSED上に論理ドライブを作成するときにHIIに誤ったエラーメッセージが表示される問題を修正しました。この問題を修正するために、エラーメッセージをアップデートし、SED暗号化を正しく反映しました。

]]>

Fixed an issue where SEDs reverting to foreign after controller reboot due to the otherwise owned flag not being saved to the datastore.

Fixed an issue where firmware crash/lockup during NDSR (Non-Disruptive Software Reset) due to a NULL pointer reference when handling a failed drive during logical drive rebuilt.

Fix 4Kn foreign SED being imported into a 512B logical drive due to incorrect failure handling, which could start a rebuild on an incompatible drive and ultimately fail.

Fixed an issue where multiple logical drives incorrectly showing REBUILDING simultaneously due to rebuild status not being updated properly during queued transformation and rebuild processes

Fixed an issue where master key change failure on Managed SED logical drives due to LU cache flush requests conflicting with the password update process.

Fixed an issue where physical drive Predictive Failure status not reported correctly by tools and iLO.

Fixed an issue where controller lockup during surface scan caused by stale internal resources when handling Unrecoverable Read Errors (UREs) in unmapped logical drive regions.

Fixed an issue where uncorrectable DDR ECC errors could be reported at boot due to cache being accessed before initialization.

Fixed an issue where the controller could lock up (0x3120C) when enabling MCP due to duplicate routing entries from flooded BMC requests.

Fixed an issue where SATA drives could be incorrectly reported as hot-removed during spin-up by adjusting the dampen timer to align with vendor-specified TTR values.

Fixed an issue where the controller could lock up (0x1E30) under high I/O workloads when configuration changes occurred simultaneously with a LUN reset.

Fixed an issue where RAID 0 could hang with I/O timeouts and LUN resets during Predictive Spare Rebuild.

Fixed an issue where the RAID controller could incorrectly report Online Firmware Activation as enabled. Firmware now checks support during PQI initialization and sets or clears the feature flags accordingly.

Fixed an issue where drives in some enclosures could show bay number 255 after the enclosure was powered on and hot-plugged, by adding handling for additional SCSI not ready status codes until the enclosure becomes ready.

Fixed an issue where Micron 6550 SED drives could fail to create a Secured Volume due to insufficient timeout during the TCG Revert process.

Fixed an issue where the controller Health state from PLDM PDRs could differ from the Storage.Status.HealthRollup value in RDE, by synchronizing the reporting logic.

Fixed an issue where SSD firmware updates could fail in dual path configurations due to PLDM errors, by sending Test Unit Ready commands to clear check conditions before SCSI passthrough operations.

Fixed an issue where Battery Redfish Alerts contained an incorrect OriginOfCondition pointing to a StorageController instead of the Battery resource.

Fixed an issue where RDE UPDATE operations on a Volume’s ReadCachePolicy could incorrectly appear successful during a CBE rekey, by adjusting the cache update logic to return accurate results regardless of cache status.

Fixed an issue where the HotspareActivationPolicy allowable values incorrectly included OnDriveFailure for RAID 0 volumes with a dedicated spare, by adding configuration checks to ensure only valid values are shown.

Fixed an issue where there is a mismatch in Overall Health State and Logical Volume State during RPI, with sensors reporting Warning (Overall Health) while RDE READs ( Logical Volume State) showed OK; reporting OK during RPI is exxpected behavior.

Fixed an issue where ProtectedWriteBack could incorrectly appear as an allowable WriteCachePolicy in RDE READs even without a backup power source, by requiring the power source to be connected and fully charged before publishing the option.

Fixed an issue where an RDE READ on certain unsupported Drive resources could cause a controller lockup, by adding bounds checking in the firmware API.

Fixed an issue where deleting volumes through PLDM Type 6 could cause a controller lockup if other PLDM commands were sent simultaneously. These commands now return NOT_READY when a long-running RDE operation is in progress.

Fixed an issue where disk utilities could display an invalid box number for drives after failing over to an alternative path, by ensuring only valid controller-provided information is shown.

Fixed an issue where an incorrect error message was shown in HII when creating a logical drive on a locked SED, by updating the error message to correctly reflect SED encryption.

]]> The following new features and changes have been included in version 25.07-0.9.7.1:

Hardware Steering (HWS): Enabled HWS as a secondary option for the device steering mode. If Software Steering (SWS) is not supported, HWS will be used by default, assuming it is available. Firmware Steering (FW) will now serve as the default only when both SWS and HWS are unsupported.
Hardware-Managed Flow Steering (HMFS): HMFS is a new approach to managing steering rules, where STEs are written to the ICM by hardware instead of software (as in software-managed steering). This enables a higher rate of rule insertion.
Queue Affinity Bonding: Added support for 4-port bonding to allow users to add both p0 and p1 to a bond without requiring SSH access to the host or bringing down the driver beforehand.
Multiple Doorbells per PF: Increased the number of doorbells from 1 to 8, distributing them in a round-robin manner across channel send and receive queues. This enhancement improves scalability on multi-core systems with high packet rates by reducing MMIO contention on doorbell addresses. In high packet-rate scenarios, Sub-NUMA Clustering is also required to maintain consistent channel packet rates.
HQoS for Virtualization Solution: Added support for hierarchical group structures to enable multi-tier resource control, where parent groups enforce overall limits and child groups dynamically share available bandwidth. This design is essential for effective QoS enforcement, burst handling, and fair bandwidth allocation, ensuring workloads receive appropriate resources.
Number of lanes Configuration when Auto-Negotiation is Disabled: Added support for specifying the number of lanes (protocol width) when auto-negotiation is disabled. Since each combination of speed and lane count corresponds to a unique link mode, this allows the user to select a specific link mode when auto-negotiation is off. This change aligns with a recent firmware update that requires the driver to provide a single link mode, rather than a bitmap based on the user-defined speed.
Extend ODP Statistics with Operation Count: Added the following new page-granularity counters:
- num_page_faults: counts the number of page fault events handled
- num_invalidations: counts the number of page invalidation events handled

]]> The following new features and changes have been included in version 25.07-0.9.7.1:

Hardware Steering (HWS): Enabled HWS as a secondary option for the device steering mode. If Software Steering (SWS) is not supported, HWS will be used by default, assuming it is available. Firmware Steering (FW) will now serve as the default only when both SWS and HWS are unsupported.
Hardware-Managed Flow Steering (HMFS): HMFS is a new approach to managing steering rules, where STEs are written to the ICM by hardware instead of software (as in software-managed steering). This enables a higher rate of rule insertion.
Queue Affinity Bonding: Added support for 4-port bonding to allow users to add both p0 and p1 to a bond without requiring SSH access to the host or bringing down the driver beforehand.
Multiple Doorbells per PF: Increased the number of doorbells from 1 to 8, distributing them in a round-robin manner across channel send and receive queues. This enhancement improves scalability on multi-core systems with high packet rates by reducing MMIO contention on doorbell addresses. In high packet-rate scenarios, Sub-NUMA Clustering is also required to maintain consistent channel packet rates.
HQoS for Virtualization Solution: Added support for hierarchical group structures to enable multi-tier resource control, where parent groups enforce overall limits and child groups dynamically share available bandwidth. This design is essential for effective QoS enforcement, burst handling, and fair bandwidth allocation, ensuring workloads receive appropriate resources.
Number of lanes Configuration when Auto-Negotiation is Disabled: Added support for specifying the number of lanes (protocol width) when auto-negotiation is disabled. Since each combination of speed and lane count corresponds to a unique link mode, this allows the user to select a specific link mode when auto-negotiation is off. This change aligns with a recent firmware update that requires the driver to provide a single link mode, rather than a bitmap based on the user-defined speed.
Extend ODP Statistics with Operation Count: Added the following new page-granularity counters:
- num_page_faults: counts the number of page fault events handled
- num_invalidations: counts the number of page invalidation events handled

]]> The following issues have been fixed in version 25.07-0.9.7.1:

OFED installation caused CIFS to break in RHEL 8.4 and above. A dummy module was added so that CIFS will be disabled after OFED installation in RHEL 8.4 and above.
Performance degradation on older kernel versions using RX cache, particularly on slower ARM CPUs with larger RX buffers. The issue was caused by the driver attempting to allocate new RX pages too quickly, leading to head-of-line blocking in the RX cache. The fix improves RX cache usage by triggering page allocation for a bulk of at least 2 WQEs, allowing the application more time to process packets and return buffers to the RX cache, thereby reducing blocking and enhancing performance.
VF behavior was not aligned with /sys/class/net/<interface-name>/device/sriov_numvfs (silently ignore attempts to set the same number of VFs, and prevent changing the number of VFs until existing VFs are removed).
On BlueField-3 devices running linux-bluefield kernel versions 5.15.0-1050 or 5.15.0-1060, a kernel crash occurred due to a NULL pointer dereference in the cls_api network scheduler.

]]> The following issues have been fixed in version 25.07-0.9.7.1:

OFED installation caused CIFS to break in RHEL 8.4 and above. A dummy module was added so that CIFS will be disabled after OFED installation in RHEL 8.4 and above.
Performance degradation on older kernel versions using RX cache, particularly on slower ARM CPUs with larger RX buffers. The issue was caused by the driver attempting to allocate new RX pages too quickly, leading to head-of-line blocking in the RX cache. The fix improves RX cache usage by triggering page allocation for a bulk of at least 2 WQEs, allowing the application more time to process packets and return buffers to the RX cache, thereby reducing blocking and enhancing performance.
VF behavior was not aligned with /sys/class/net/<interface-name>/device/sriov_numvfs (silently ignore attempts to set the same number of VFs, and prevent changing the number of VFs until existing VFs are removed).
On BlueField-3 devices running linux-bluefield kernel versions 5.15.0-1050 or 5.15.0-1060, a kernel crash occurred due to a NULL pointer dereference in the cls_api network scheduler.

]]> バージョン25.04-0.6.1.1には、次の新機能と変更が含まれています。

トラストロックダウンヘルスシンドローム：トラストロックダウン用の新しいヘルスシンドロームを追加し、ヘルスバッファー内のCRRビットを公開します。CRRビットが設定されている場合、シンドロームの回復にはコールドリセットが必要であることを示しています。
ハードウェアクロックごとに1つのPTPデバイス：PHCは通常、複数の機能間で共有されます。現在、ドライバーは同じPHCを共有するネットワークインターフェイスごとに個別のPTPデバイスを作成するため、冗長性があり、複雑さが増しています。この問題を解決するために、リアルタイムモードで動作しているときに共有されたPHCを表す1つのPTPデバイスが作成されるようになりました。
IB状態遷移のログ：カーネルログ (dmesg) にログメッセージを追加することで、IBデバイスの状態遷移の可視性が向上しました。IBデバイスの状態が変化するたびに、対応するメッセージが記録されます。例えば、"mlx5_0: Port: 1 Link DOWN"などです。
オプションカウンターのバインディングサポートと新しいパケット/バイトカウンター：以前は、オプションカウンターはリンクごとにのみ使用可能でした。このリリースでは、オプションカウンターを特定のカウンターオブジェクトにバインドする機能が導入され、ユーザーは特定のQPグループ全体でオプションカウンターを追跡できるようになりました。自動バインディングモードと手動バインディングモードの両方がサポートされます。どちらの場合も、QPにバインドされるオプションカウンターは、バインド時にリンク上で現在設定されているカウンターです。さらに、RDMAのイングレストラフィックとイーグレストラフィックを追跡する4つの新しいオプションカウンター (rdma_tx_bytes、rdma_tx_packets、rdma_rx_bytes、rdma_rx_packets) が導入されました。この機能はiproute2パッケージを介してユーザーに公開されますが、この機能をサポートするにはこのパッケージをアップデートする必要があります。
User CAPability (UCAP) API：User CAPability (UCAP) APIは、特定のファームウェア権限を持つユーザーコンテキストを作成するためのメカニズムを導入します。各機能をルートレベルの読み取り/書き込みアクセスを持つキャラクター型デバイスとして公開することで、ファームウェア機能に対するきめ細かな制御を実現します。ルートプロセスでは、対応するキャラクター型デバイスへのアクセスを許可することで、ユーザーにこれらの権限を付与できます。UCAPファイル記述子を使用してユーザーコンテキストが作成されると、ユーザーコンテキストは関連付けられている権限を継承します。mlx5の場合、2つのUCAPキャラクター型デバイスが提供され、そのうちの少なくとも1つを使用して開かれたユーザーコンテキストが特権として扱われます。特権コマンドの実行を保証するために、特権ユーザーがデバイス上でアクティブな場合、非特権コマンドが制限されます。

]]> The following new features and changes have been included in version 25.04-0.6.1.1:

Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.

]]> 以下の問題点がバージョン25.04-0.6.1.1で修正されました。

メッセージサイズの大きい多数のQPを使用する場合など、大きなバッファーの割り当て中に、バッファーの初期化がパフォーマンスのボトルネックになっていました。根本的な原因は、rand() の非効率的な使用でした。この問題は、より高速な疑似ランダムアルゴリズムに置き換えることで解決されました。
ピアメモリ登録の失敗の処理中に発生する可能性のあるデッドロック。
SwitchDevモードに切り替える際に次のエラーが発生しました。"mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
名前空間内からハードウェアカウンターにアクセスする際に発生したsysfsの問題。
"ibstat"は、RoCE/IB以外のデバイスを見つけると失敗してクラッシュし、残りの有効なRoCE/IBデバイスの情報を表示できなくなります。
QPの数が多い場合に帯域幅が低下し、反復ごとに16個のCQEをポーリングするだけでは、すべての完了を時間内に処理するのに十分ではない可能性があります。
ブート中のファームウェアシンドロームレポートとドライバー初期化の間の競合状態。
ブート中にファームウェアシンドロームが検出されたため、ドライバーのロードに失敗しました。
mlnx_tune -lコマンドでは、実際にサポートされているいくつかのオペレーティングシステムがリストされませんでした。
カーネルはTCA_TUNNEL_KEY_ENC_SRC_PORTを定義しませんでした。オフロードの動作を非オフロードと一致させるために、OVSコミュニティは、このトンネル属性が使用されている場合にオフロードが失敗するコミット (netdev-offload-tc：トンネルキーtp_srcのオフロードを修正) を導入しました。これで、トンネルのソースポートを含むトンネルセットアクションを持つすべてのルールはオフロードできなくなります。
VFまたはBFホストPFからのLLDPトラフィックが、リプレゼンターカーネルインターフェイスに到達していませんでした。
内部と外部の両方の宛先 (dst) および/または送信元 (src) MACアドレスが同じ値に書き換えられたフローで、外部MACアドレスの書き換えは無視され、外部MACアドレスが00:00:00:00:00:00 になります。
OVNでsFlowを有効にすると、OVSがクラッシュしました。
DPUが"packet with own source address"というエラーメッセージを繰り返しブロードキャストした後、OVSが予期せずクラッシュしました。
ポートの設定中にhw-offload設定をtrueからfalseに変更すると、OVSログにエラーが報告されました。

]]> The following issues have been fixed in version 25.04-0.6.1.1:

Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
A potential deadlock that could occur during the handling of peer memory registration failures.
The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
A sysfs issue that occurred when accessing hardware counters from within a namespace.
"ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
A race condition between firmware syndrome report and driver initialization during boot.
The driver failed to load when a firmware syndrome was detected during boot.
The mlnx_tune -l command did not list several operating systems that were in fact supported.
The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
Enabling sFlow with OVN caused OVS to crash.
OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.

]]> Fix build tool certification issue.

]]> Gen10P ML30サーバーおよびGen10 DL360/DL380サーバーをサポート

]]> Support Gen10P ML30 server and Gen10 DL360/DL380 servers

]]> MarSPP2026

]]>

Added support for SLES16

]]>

Added support for SLES16

]]>

これは、FW防御アルゴリズムのコード修正、アサート後のSN変更、およびPOSCAP誤警報を含むメンテナンスリリースです。

詳しくは、HPEカスタマーアドバイザリ: https://support.hpe.com/hpesc/public/docDisplay?docId=a00150197en_usを参照してください。

]]>

This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.

For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00150197en_us.

]]>

これは、FW防御アルゴリズムのコード修正、アサート後のSN変更、およびPOSCAP誤警報を含むメンテナンスリリースです。

]]>

This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.

]]>

Added support for ESXi 9.1

]]>

Added support for ESXi 9.1

]]>

ESXi 9.0のサポートを追加しました

]]>

Added support for ESXi 9.0

]]> Initial Build

]]> 現在のHPE iLO 5 v3.17リリースには機能強化はありません。

]]> There are no enhancements in the current HPE iLO 5 v3.17 release.

]]> COM経由のHPE iLOファームウェアのアップグレード後、OSで不適切なシャットダウンが検出される問題を修正しました。

]]> Fixed an issue where an improper shutdown was detected in the OS after HPE iLO firmware upgrade through COM.

]]> This Firmware package contains following firmware versions:

Adapter	Speed	MBI	Firmware	UEFI	Boot Bios
HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.11.11	09.15.15	7.39	NA
HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.11.11	09.15.15	7.39	NA
HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	02.11.11	09.15.15	7.39	NA
HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter	64Gb	02.11.11	09.15.15	7.39	NA

]]> This Firmware package contains following firmware versions:

Adapter	Speed	MBI	Firmware	UEFI	Boot Bios
HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.11.11	09.15.15	7.39	NA
HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.11.11	09.15.15	7.39	NA
HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	02.11.11	09.15.15	7.39	NA
HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter	64Gb	02.11.11	09.15.15	7.39	NA

]]> Fixed the following :

SFP Parameters value decimal part is truncated

]]> Fixed the following :

SFP Parameters value decimal part is truncated

]]> このファームウェアパッケージには、以下のファームウェアバージョンが含まれています。

アダプター	速度	MBI	ファームウェア	UEFI	ブートBIOS
HPE SN1100Q 16GBデュアルポートPCIeファイバーチャネルホストバスアダプター	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1100Q 16GBシングルポートPCIeファイバーチャネルホストバスアダプター	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gbシングルポートファイバーチャネルホストバスアダプター	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gbデュアルポートファイバーチャネルホストバスアダプター	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1610Q 32Gbデュアルポートファイバーチャネルホストバスアダプター	32Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1610Q 32Gbシングルポートファイバーチャネルホストバスアダプター	32Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1700Q 64Gbデュアルポートファイバーチャネルホストバスアダプター	64Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1700Q 64Gbシングルポートファイバーチャネルホストバスアダプター	64Gb	02.11.09	09.15.15	7.39	0.0

]]> This Firmware package contains following firmware versions:

Adapter	Speed	MBI	Firmware	UEFI	Boot Bios
HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter	64Gb	02.11.09	09.15.15	7.39	0.0

]]> Added ESXi 9.1 Supported Environment

]]>

この製品は、VPD (Vital Product Data) 内の固有のシリアル番号がダミーのシリアル番号に変更される問題を修正します。

この製品は、再起動時にiLO共有NIC DHCP IPの取得に失敗し、MCTP EIDが見つからない問題を修正します。

この製品は、PCI温度センサーが断続的に欠落し、ファン速度が上昇する可能性がある問題を修正します

]]>

This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number.

This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.

This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed

]]>

この製品は、VPD (Vital Product Data) 内の固有のシリアル番号がダミーのシリアル番号に変更される問題を修正します。

この製品は、再起動時にiLO共有NIC DHCP IPの取得に失敗し、MCTP EIDが見つからない問題を修正します。

この製品は、PCI温度センサーが断続的に欠落し、ファン速度が上昇する可能性がある問題を修正します

]]>

This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number.

This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.

This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed

]]> Updated driver version to 9.4.11.20.

]]> Updated Driver and Installer Digital Signature Validity

]]> これは Windows 2025 用の最初のドライバーです。このドライバーのバージョンは9.4.11.20です、

]]> This is the first driver for Windows 2025 . The driver version is 9.4.11.20.

]]>

Modified the SSACLI component version format to meet the new requirement from VMware ESXi for 9.1

Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares

Modified the default strip size for NVMe drives based on the Maximum Data Transfer Size (MDTS), and tools will set the default strip size to the minimum supported MDTS value when creating or migrating a logical drive

]]>

Modified the SSACLI component version format to meet the new requirement from VMware ESXi for 9.1

Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares

]]>

Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels.

Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present.

Fixed an issue where a foreign-owned SED drive was being listed for array creation.

Fixed an issue where the last failure reason was not listing on physical drives.

Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode.

Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume.

Fixed an issue where a duplicate entry for the physical drive was displayed.

]]>

Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels.

Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present.

Fixed an issue where a foreign-owned SED drive was being listed for array creation.

Fixed an issue where the last failure reason was not listing on physical drives.

Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode.

Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume.

Fixed an issue where a duplicate entry for the physical drive was displayed.

]]>

Added support for ESXi 9.1

]]>

Added support for ESXi 9.1

]]>

ESXi 9.0のサポートを追加しました

]]>

Added support for ESXi 9.0

]]>

8.16 AV2 PR2 GCA

]]>

8.16 AV2 PR2 GCA

]]>

バックプレーンベイ数情報を、コントローラーに接続されている実際のベイに変更。

工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加

LSA GUIボタンの順序を変更

[Rebuild]ボタンを[Make Online]ボタンの前に移動
オフラインドライブの警告セッションに[Rebuild]ボタンを追加

劣化したボリュームの推奨アクションを[Make sure all the participating drives are connected and rebuild is complete]に変更。

]]>

Change the backplane bay count information to the actual bay that is connected to controller.

Add support for users to clear NVRAM using Factory Repurpose operation

Re-order LSA GUI buttons

Move the Rebuild button to the top before Make Online button
Add the Rebuild button in the Offline Drive warning session

Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.

]]>

a00150411en_usアドバイザリのMRSAの問題を修正: HPE Compute MR Controllers - Red Hat Enterprise Linux Server 10でHPE MR Storage Administrator (MRSA) の起動問題とストレージコマンドラインインターフェイス (StorCLI) のインストールに関する警告メッセージが表示される

]]>

Fix MRSA issue in a00150411en_us Advisory: HPE Compute MR Controllers - HPE MR Storage Administrator (MRSA) Launch Issue and Storage Command Line Interface (StorCLI) Installation Warning Message Observed With Red Hat Enterprise Linux Server 10

]]>

This maintenance revision improves overall drive performance.

The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.

]]>

This maintenance revision improves overall drive performance.

The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.

]]> This version is in compliance with IPU 2026.1 guidance.

Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

]]> This version is in compliance with IPU 2026.1 guidance.

Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

Known Issues:

None]]> Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

]]> Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

Known Issues:

None

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

Known Issues:

None

]]>

7.36 (Aero PR11 GCA)

]]>

7.36 (Aero PR11 GCA)

]]>

UNMAP コマンドを検証し、最新のファームウェアでブロック制限 VPD ページデータが正しいことを確認しました。

]]>

Verified the UNMAP command and confirmed that the Block Limits VPD page data is correct with the latest firmware.

]]>

リセットとイベント処理スレッド間の潜在的なミューテックスデッドロックを修正しました。この問題は、大量の IO、デバイスの追加/削除、SCSI 再スキャンが同時に実行されている場合に発生する可能性があります。

]]>

Fix a potential mutex deadlock between reset and event handling thread. The issue may happen when there is heavy IO, device add/delete and SCSI rescan running in the same time.

]]> Important Notes:

This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

Known Issues:

None]]> 重要な注意：

システムROMのこのリビジョンには、AMD第3世代EPYCプロセッサー用のAMD参照コードMilanPI 1.0.0.Hが含まれています。システムROMのこのリビジョンには、AMD第2世代EPYCプロセッサー用のAMDリファレンスコードRomePI 1.0.0.Nが含まれています。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

システムROMのこのリビジョンには、AMD第3世代EPYCプロセッサー用のAMD参照コードMilanPI 1.0.0.Hが含まれています。

システムROMのこのリビジョンには、AMD第2世代EPYCプロセッサー用のAMDリファレンスコードRomePI 1.0.0.Nが含まれています。

既知の問題点：

なし]]> Important Notes:

This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

Known Issues:

None]]>

Added support for SLES16.

]]>

Added support for SLES16.

]]> RHEL 10のサポートを追加しました

]]> Added Support for RHEL 10

]]>

This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number

This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.

This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed

]]>

This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number

This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.

This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed

]]> この製品は、ファームウェアのアップデート後にMBA構成がデフォルトにリセットされる問題を修正します。

]]> This product fixes where MBA configuration reset to defaults after updating firmware.

]]>

Added support for Azure Local 24H2.

]]>

Added support for Azure Local 24H2.

]]>

このメンテナンスの改訂により、ドライブ全体のパフォーマンスが向上します。

このファームウェアにアップグレードしない場合、特定のエラーおよびタイミング条件下でドライブがハングアップする可能性が高まります。

]]>

This maintenance revision improves overall drive performance.

The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.

]]>

このメンテナンスの改訂により、ドライブ全体のパフォーマンスが向上します。

このファームウェアにアップグレードしない場合、特定のエラーおよびタイミング条件下でドライブがハングアップする可能性が高まります。

]]>

This maintenance revision improves overall drive performance.

The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.

]]>

Added support for ESXi 9.1

]]>

Added support for ESXi 9.1

]]>

特定のシナリオでドライブがコントローラーの背後にある場合のドライブフラッシュの問題を修正しました。

]]>

Fix drive flash issue when drive behind the controller in a specific scenario.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

Known Issues:

None]]> Important Notes:

This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

Known Issues:

None]]> Important Notes:

Ver. 0.2.3.0(H) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision H if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

Known Issues:

None

]]> Important Notes:

This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

Firmware Dependencies:

None

Problems Fixed:

Known Issues:

None

]]> 重要な注意:

Ver. 0.2.3.0(F)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver. 0.2.3.0と同等です。ファームウェアをバージョン0.2.3.0にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョンFにアップグレードする必要はありません。

このLinuxコンポーネントは、Service Pack for ProLiant 2024.11.00.00 と互換性があります。

ファームウェアの依存関係:

なし

修正された問題点：

Innovation Engine（IE）が24時間ごとに不適切にリセットされる可能性がある問題に対処しました。一部のシステムでは、これによりCPU使用率が一時的に低下したり、ネットワークトラフィックの持続が1秒未満になったりする可能性があります。

既知の問題点:

なし

]]> Important Notes:

Ver. 0.2.3.0(F) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision F if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

Firmware Dependencies:

None

Problems Fixed:

Known Issues:

None

]]> Important Notes:

Ver. 1.1.4(H) contains updates to the firmware packaging and is functionally equivalent to ver. 1.1.4. It is not necessary to upgrade with Revision H if a previous component revision was used to upgrade the firmware to version 1.1.4.

This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

Firmware Dependencies:

For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

Enhancements/New Features:

Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

Problems Fixed:

None

Known Issues:

None

]]> Important Notes:

This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

Firmware Dependencies:

For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

Enhancements/New Features:

Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

Problems Fixed:

None

Known Issues:

None

]]> 重要な注意：

なし

ファームウェアの依存関係：

HPE ProLiant Gen10 Plusサーバーの場合、このバージョンにアップグレードするには、iLO5バージョン2.55以降が必要です。

機能強化/新しい機能：

大量の電力を消費するデバイスが導入された場合にマシンの電源障害を回避するために、特定の動作が変更されました。

修正された問題点：

なし

既知の問題点：

なし

]]> Important Notes:

None

Firmware Dependencies:

For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

Enhancements/New Features:

Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

Problems Fixed:

None

Known Issues:

None

]]> Updated Driver version 10.02.15.00-k1

]]> ドライバーをバージョン10.02.14.00-k1にアップデートしました

]]> Updated Driver version 10.02.14.00-k1

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

Known Issues:

None]]> 1.5GBのMMCFGベースをサポートするための新しいRBSUサービスオプションを追加しました

OEM向け「Intelligent Provisioning」の警告メッセージの文言をアップデートしました。

システム構成 > BIOS/プラットフォーム構成 (RBSU) > 電力およびパフォーマンスオプションにCPU C1自動降格/自動降格解除オプションを追加しました。

]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア04.04.04.802（2.50_07_24_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

修正された問題：

Intel I350-T4 OCP NICを使用しているときに、レガシーモードでのシステムPXEブートが失敗する可能性がある問題に対処しました。

Linuxの起動中にシステムが誤った割り込みメッセージを表示する可能性がある問題に対処しました。

システムiLOのリモートコンソールが、RBSUに警告メッセージが表示された場合に、応答しなくなる問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

Addressed an issue where the system might display spurious interrupt message during Linux boot up.

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]> MarSPP2026

]]> MarSPP2026

]]>

This product enhanced traffic flow in queue map rebalance.

This product enhanced media type detection over PHY logic.

]]>

This product enhanced traffic flow in queue map rebalance.

This product enhanced media type detection over PHY logic.

]]> This product fixed the system event logging.

]]> Firmware for the following devices has been updated to 14.32.1908:

817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

Firmware for the following device has been updated to 16.35.8002:

874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

Changes included in product version 1.0.2(A):

Support added for VMWare ESXi 9.1.

New features and changes included in version 14.32.1908:

This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

New features and changes included in version 16.35.8002:

Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> Firmware for the following devices has been updated to 14.32.1908:

817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

Firmware for the following device has been updated to 16.35.8002:

874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

Changes included in product version 1.0.2(A):

Support added for VMWare ESXi 9.1.

New features and changes included in version 14.32.1908:

This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

New features and changes included in version 16.35.8002:

Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> バージョン14.32.1908には修正は含まれていません。

以下の問題点がバージョン16.35.8002で修正されました。

FWがCQ回復モードに入った後、ファームウェアはPFの正しいCQをスキャンできませんでした。その結果、PFのCQが回復されませんでした。

]]> No fixes are included in version 14.32.1908.

The following issues have been fixed in version 16.35.8002:

Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.

]]> 次のデバイス用のファームウェアが14.32.1908にアップデートされました。

817749-B21 (HPE Ethernet 25Gb 2ポート640FLR-SFP28アダプター)
817753-B21 (HPE Ethernet 25Gb 2ポート640SFP28アダプター)

次のデバイス用のファームウェアが16.35.8002にアップデートされました。

874253-B21（HPE Ethernet 100Gb 1ポート842QSFP28アダプター）

バージョン14.32.1908には、以下の新機能と変更が含まれます。

このリリースには、重要な信頼性の向上とセキュリティ強化の機能強化が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨しています。

バージョン16.35.8002には、以下の新機能と変更が含まれます。

ファームウェア例外パス処理のパフォーマンスが向上し、構成されたSR-IOVインスタンスの数の増加をより適切にサポートできるようになりました。
このリリースには、重要な信頼性の向上とセキュリティ強化の機能強化が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨しています。

]]> Firmware for the following devices has been updated to 14.32.1908:

817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

Firmware for the following device has been updated to 16.35.8002:

874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

New features and changes included in version 14.32.1908:

This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

New features and changes included in version 16.35.8002:

Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> バージョン14.32.1908には修正は含まれていません。

以下の問題点がバージョン16.35.8002で修正されました。

FWがCQ回復モードに入った後、ファームウェアはPFの正しいCQをスキャンできませんでした。その結果、PFのCQが回復されませんでした。

]]> No fixes are included in version 14.32.1908.

The following issues have been fixed in version 16.35.8002:

Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.

]]>

This product now supports Red Hat Enterprise Linux 9.7

]]>

This product now supports Red Hat Enterprise Linux 9.7

]]>

この製品は、現在Red Hat Enterprise Linux 9.6をサポートします。

この製品は、ethtoolレポートをサポートするためにリンク機能に25G AOCトランシーバーのサポートを追加します。

]]>

This product now supports Red Hat Enterprise Linux 9.6.

This product adds support for 25G AOC transceiver in link capability to support ethtool report.

]]> to be added

]]> なし

]]> None

]]> OpenSSL 3.Xを搭載したLinuxオペレーティングシステムでhponcfgが失敗する問題を修正しました。

]]> Fixed an issue where hponcfg was failing on Linux operating system with OpenSSL 3.X

]]>

7.36 Aero PR11 GCA

]]>

7.36 Aero PR11 GCA

]]>

DMTF PLDM Redfish デバイス有効化の機能強化

Redfishボリューム変換サポート
- POST #Volume.ChangeRAIDLayout: RAIDレイアウトの変更。RAIDレイアウトの変更は、入力JSONボディにターゲットRAIDTypeとドライブのリストを提供することで実現されます。
- POST #Volume.ChangeRAIDLayout: サイズ変更。ChangeRAIDLayoutを使用すると、RAIDTypeを変更せずに新しい未構成正常ドライブを追加することでボリュームのサイズを変更できます。このような場合、入力JSONボディでRAIDTypeを指定してはいけませんが、それに応じて完全なドライブリストを指定する必要があります。
- PATCH Volume[CapacityBytes]: この操作は、ボリューム内に利用可能な未使用サイズがある場合にボリュームのサイズを変更するために使用されます。ここに新しいドライブを追加するスコープはありません
- POST #Volume.CheckConsistency: この操作は、ボリューム上の整合性チェック操作を開始します。この操作では入力は想定されません。
Redfish Metrics GETサポート
- StorageControllerMetrics: UncorrectableECCErrorCount、CorrectableECCErrorCount、CorrectableParityErrorCount, StateChangeCount
- PortMetrics: SAS.InvalidDwordCount、SAS.LossOfDwordSynchronizationCount、SAS.RunningDisparityErrorCount、PCIeErrors.CorrectableErrorCount、PCIeErrors.FatalErrorCount、PCIeErrors.NonFatalErrorCount
- 各カウンターは最大65535までの値を保持できます。カウンターが最大値に達しても、値はリセットされません。
- ユーザーがコントローラーのNVRAMクリアまたはRedfish ResetToDefaults.ResetAllを実行すると、メトリックはクリアされます。

MRSAおよびstorcli工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加。

コントローラー上に構成が存在する場合、または固定キャッシュが存在する場合、NVRAMクリア操作は許可されません。
NVRAMをクリアした後、コントローラーFWはオンラインコントローラーリセット (OCR) を実行します。何らかの理由でOCRを実行できない場合は、システムを再起動するようにユーザーに通知されます。
NVRAMクリア操作は、機能的にはRedfish ResetToDefaults.ResetAll操作と同等です。

バックプレーンベイ数情報を、コントローラーに接続されている実際のベイに変更。非ホットプラグ構成の場合、コントローラーは常に16個のベイを表示します。

]]>

DMTF PLDM Redfish Device Enablement enhancements

Redfish Volume Transformation Support
- POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
- POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
- PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
- POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
Redfish Metrics GET Support
- StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
- PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
- Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
- Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.

Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.

Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.

Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.

]]>

a00143124en_usアドバイザリを修正: HPE MR Gen11 コントローラー - HPE Gen11サーバー上のMR Gen11コントローラーがIMLで"WriteCacheDataLoss"を生成できない場合がある

a00148035en_usアドバイザリを修正: HPE MR Gen11コントローラー - ベイとボックスのNVMeドライブの場所がワンタイムブートメニューに表示されない

Linux OSでLTOの128KBを超える読み取り/書き込み転送が失敗する問題を修正

Backup ExecがLTOで動作しない問題を修正

240個の論理ドライブが構成されている場合、サーバーのブート時にコントローラーがiLOによってドロップされる可能性がある問題を修正

ドライブを連続的に削除すると、サーバーヘルスが一時的にクリティカルを示すというまれな問題を修正

予期しないPCIConfiglinkページイベント、仮想SESデバイスへのタスク管理のタイムアウトメッセージがsnapdumpに記録される問題を修正

空のベイにスロット対応プロトコルがない問題を修正

コントローラーに接続されたLTOのリンク速度が[不明]と表示される問題を修正

Request Senseコマンドにより、サニタイズが進行中のドライブでタスク管理が実行される問題を修正。

255を超える値が使用された場合に、Redfish PATCH StorageController[ControllerRates]がランダムな値を暗黙的に設定してしまう問題を修正。

コントローラーがパススルーとして構成されているときにVMを再起動すると、誤ったコントローラーエラーイベントが記録される可能性がある問題を修正

2つのバックプレーンが同じストレージポートに接続されている場合、Redfishファブリックポートのアクティブ幅と現在の速度が間違っているという問題を修正。

再起動後にNVMeドライブのリンクステータスが失敗する可能性があるというまれな問題を修正

複数のドライブの取り外しと挿入が短時間に行われたときにコントローラーがアサートされる可能性があるというまれな問題を修正

SATAパススルーコマンドが実行中の場合、SATAドライブのサニタイズのパーセンテージが進行しない問題を修正

NVMeドライブでサニタイズのパーセンテージが進行しない問題を修正

読み取り/書き込みコマンドと非読み取り/書き込みコマンドの耐久テストでIOタイムアウトとデバイスリセットが発生することがあるというまれな問題を修正

]]>

Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML

Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu

Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS

Fix an issue that Backup Exec doesn’t work with LTO

Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured

Fix a rare issue that server health shows critical temporally when remove drive continuously.

Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump

Fix an issue that Slot capable protocol is missing for empty bay

Fix an issue that Link Speed for LTO connected to controller shows Unknown

Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.

Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.

Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot

Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.

Fix a rare issue that NVMe drive link status may fail after reboot

Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time

Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running

Fix an issue that sanitize percentage does not progress on NVMe drives

Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands

]]>

Fixes an intermittent issue where the incorrect model number can be reported during spin-up.

]]>

Fixes an intermittent issue where the incorrect model number can be reported during spin-up.

]]>

Added support for SLES16.

]]>

Added support for SLES16.

]]>

RHEL10のサポートを追加しました。

]]>

Added support for RHEL10.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]>

Updated setup utility dependencies

]]>

Updated setup utility dependencies

]]>

SBOM要件をアップデートしました

]]>

Updated SBOM requirement

]]>

Added support for Azure Local 24H2.

]]>

Added support for Azure Local 24H2.

]]>

ファームウェアの変更は、将来のFIPSコードリリースと1つのアサート修正のため調整されました。

]]>

Firmware changes aligned for future FIPS code release and one assert fix.

]]>

ファームウェアの変更は、将来のFIPSコードリリースと1つのアサート修正のため調整されました。

]]>

Firmware changes aligned for future FIPS code release and one assert fix.

]]> Regular FW fix on assert, time-out, error log several fixes.

]]>

FWアサートおよびその他の定期的な修正を修正します

]]>

Fix FW assert and other regular fixes

]]>

Added support for SLES16

]]>

Added support for SLES16

]]>

Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.

For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us

]]>

Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.

For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us

]]>

RHEL10のサポートを追加しました。

]]>

Added support for RHEL10.

]]>

Added support for ESXi 9.1

]]>

Added support for ESXi 9.1

]]>

ESXi 9.0のサポートを追加しました

]]>

Added support for ESXi 9.0

]]>

直接接続されたNVMeファームウェアのフラッシュの表示メッセージを修正し、OSによるFWアクティベーションの結果を揃えます。

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]> Added ESXi 9.1 Supported Environment

]]>

This product fixed an HII defect where the “functionless default” overwrote modification information for the same flag field.

This product fixed an issue where BIOS failed to preserve greyed‑out options, preventing unintended writes.

]]>

This product fixed an HII defect where the “functionless default” overwrote modification information for the same flag field.

This product fixed an issue where BIOS failed to preserve greyed‑out options, preventing unintended writes.

]]> この製品は、AMDプラットフォームでDMA再マッピングが有効になっている場合にPXEブートが機能しない問題を修正しました。

]]> This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

]]> Added support for vSphere 9.1 OS

]]> 割り込みストームによるPSODを修正し、snmpwalkの遅延を修正するために、iloドライバーにMSI割り込みを実装します。

]]> Implement MSI interrupt in the ilo driver to fix PSOD due to interrupt storm and to fix snmpwalk delays.

]]> Initial version

]]> Support Windows 2016 only.

]]>

マルチパスシナリオでのケーブルの抜き差しイベント中に、MPIO対応の物理ドライブで観察される一貫性のないI/Oエラーを修正しました。

]]>

Fixed the inconsistent I/O errors observed in MPIO enabled physical drives during cable plug/unplug events in multipath scenarios.

]]> Fix build tool certification issue.

]]>

論理ドライブをインポートするときにシステムがクラッシュする可能性がある問題を修正しました。

]]>

Fix an issue that system may crash when importing Logical Drive.

]]> Private release for specific customers.

]]> SY480 Gen12 サーバーをサポートします。

]]> Support SY480 Gen12 server.

]]>

Added support for SLES16.

]]>

Added support for SLES16.

]]> RHEL 10のサポートを追加しました

]]> Added Support for RHEL 10

]]>

Disabled Latency Tolerance Reporting Feature

Drop MCTP command when interrupted by a Function Level Reset (FLR)

]]>

Disabled Latency Tolerance Reporting Feature

Drop MCTP command when interrupted by a Function Level Reset (FLR)

]]>

Changes have been made in the 7500 firmware HPK6 over the previous firmware release to address Uncorrectable PCIe errors that are reported as ACS violations when Function Level Resets (FLR) are issued to the drive.
If this firmware is not updated, errors will be reported in HPE’s iLO logging but there is no risk to user data or drive reliability.

]]>

HPK1では、変更点および改善点として、Gen11 x2直接接続システムでドライブの内部PHYレジスタ値を変更することにより、受信信号を強化しています。

]]>

Changes and improvements made in HPK1 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.

]]>

A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.

]]>

A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.

]]>

Added support for Azure Local 24H2

]]>

Added support for Azure Local 24H2

]]>

Added fix to address a rare case where drive health queries can trigger false drive predictive failure.

]]>

Added fix to address a rare case where drive health queries can trigger false drive predictive failure.

]]>

ドライブヘルスのクエリが誤ったドライブ予測エラーを引き起こす可能性がある、まれなケースに対処するための修正を追加しました。

]]>

Added fix to address a rare case where drive health queries can trigger false drive predictive failure.

]]> 重要な注意：

このバージョンのServer Platform Services (SPS) ファームウェアには、Intel製品アップデート (IPU) バージョンIPU.2025.1ガイダンスに沿ったアップデートが含まれています。このバージョンのSPS 04.01.05.105は、システムROM 3.40 (01/16/2025) 以降と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの関連性：

なし

機能強化/新しい機能:

このバージョンは、IPU.2025.1ガイダンスに準拠しています。

既知の問題点：

なし]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.01.05.105 should be paired with System ROM 3.40 (01/16/2025) or later.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2025.1 guidance.

Known Issues:

None]]>

Added support for Azure Local 24H2.

]]>

Added support for Azure Local 24H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Azure Stack HCI 23H2のサポートを追加しました

]]>

Added support for Azure Stack HCI 23H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Updated setup utility dependencies

]]>

Updated setup utility dependencies

]]>

サポート環境をアップデートしました

]]>

Updated supported environments

]]>

Added support for SLES16

]]>

Added support for SLES16

]]>

Added fix to address a rare case where drive health queries can trigger false drive predictive failure.

]]>

Added fix to address a rare case where drive health queries can trigger false drive predictive failure.

]]>

RHEL 10のサポートを追加しました。

]]>

Added support for RHEL 10.

]]> MarSPP2026

]]>

Added support for ESXi 9.1

]]>

Added support for ESXi 9.1

]]>

ESXi 9.0のサポートを追加しました

]]>

Added support for ESXi 9.0

]]> MarSPP2026

]]> この製品は、ファームウェアとの互換性を強化しました。

]]> This product enhanced the compatibility with firmware.

]]> MarSPP2026

]]>

This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

This product fixed hang issue when run SCT tool with DriverModelTest.

]]>

This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

This product fixed hang issue when run SCT tool with DriverModelTest.

]]> TBD

]]> この製品では、新しいGen11サーバーのサポートを追加しました。

]]> This product added support to new Gen11 servers.

]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2026.1 guidance.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2026.1 guidance.

Known Issues:

None]]> 重要な注意：

このバージョンのServer Platform Services (SPS) ファームウェアには、Intel製品アップデート (IPU) バージョンIPU.2025.3ガイダンスに沿ったアップデートが含まれています。このバージョンのSPS 06.00.03.708 (2.50_07_25_2025) は、システムROM 2.50 (08/06/2025) 以降と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

このバージョンは、IPU 2025.3ガイダンスに準拠しています。

既知の問題点：

なし]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2025.3 guidance.

Known Issues:

None]]>

Added support for SLES16

]]>

Added support for SLES16

]]>

Fixed Reset issue and regular maintenance firmware update.

]]>

Fixed Reset issue and regular maintenance firmware update.

]]>

リセットの問題と定期的なメンテナンスファームウェアアップデートを修正しました。

]]>

Fixed Reset issue and regular maintenance firmware update.

]]> Feature Change: Removal of virtualization/SRIOV feature.

]]> New features and changes included in version 22.46.3048:

Added support for RSS with crypto offload enabling the NIC to parallelize packet processing across CPU cores while performing encryption/decryption in hardware. Additionally, introduced a new l4_type_ext parameter with values: 0 (None), 1 (TCP), 2 (UDP), 3 (ICMP).
Added an extra validation for the payload_len field in incoming NC-SI messages. Previously, invalid packets might have been accepted; now, such packets are silently dropped.
This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> New features and changes included in version 22.46.3048:

Added support for RSS with crypto offload enabling the NIC to parallelize packet processing across CPU cores while performing encryption/decryption in hardware. Additionally, introduced a new l4_type_ext parameter with values: 0 (None), 1 (TCP), 2 (UDP), 3 (ICMP).
Added an extra validation for the payload_len field in incoming NC-SI messages. Previously, invalid packets might have been accepted; now, such packets are silently dropped.
This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> The following issues have been fixed in version 22.46.3048:

Configuring a small MTU led to fragmentation of packets critical for the PXE boot process. As a result, the PXE boot filters mistakenly discarded these packets, causing the PXE boot to fail.

]]> The following issues have been fixed in version 22.46.3048:

Configuring a small MTU led to fragmentation of packets critical for the PXE boot process. As a result, the PXE boot filters mistakenly discarded these packets, causing the PXE boot to fail.

]]> Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

No new features and changes have been included in version 22.45.1020.

]]> The following issues have been fixed in version 22.45.1020:

PCC_CNP_COUNT could not be reset using the pcc_counter.sh script in the DOCA tools.
VQoS algorithm issue related to learning when an element is active and when it begins sending traffic.
A race condition that would prevent the application from transmitting when VQoS was enabled.
Bandwidth would drop when unbinding multiple VFs with VQoS enabled.
RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.

]]> The following issues have been fixed in version 22.45.1020:

PCC_CNP_COUNT could not be reset using the pcc_counter.sh script in the DOCA tools.
VQoS algorithm issue related to learning when an element is active and when it begins sending traffic.
A race condition that would prevent the application from transmitting when VQoS was enabled.
Bandwidth would drop when unbinding multiple VFs with VQoS enabled.
RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.

]]> MarSPP2026

]]> この製品は、VFドライバーが無効になっているかインストールされていない場合にVMトラフィックが機能しない可能性がある問題を修正します。

]]> This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

]]>

Added support for Azure Local 24H2

]]>

Added support for Azure Local 24H2

]]>

定期的なFWメンテナンスリリース。

]]>

Regular FW maintenance release.

]]>

定期的なFWメンテナンスリリース。

]]>

Regular FW maintenance release.

]]>

Added support for Azure Local 24H2.

]]>

Added support for Azure Local 24H2.

]]>

このメンテナンスの改訂により、ドライブ全体のパフォーマンスが向上します。

このファームウェアにアップグレードしない場合、特定のエラーおよびタイミング条件下でドライブがハングアップする可能性が高まります。

]]>

This maintenance revision improves overall drive performance.

The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.

]]>

このメンテナンスの改訂により、ドライブ全体のパフォーマンスが向上します。

このファームウェアにアップグレードしない場合、特定のエラーおよびタイミング条件下でドライブがハングアップする可能性が高まります。

]]>

This maintenance revision improves overall drive performance.

The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.

]]>

Added support for SLES16

]]>

Added support for SLES16

]]>

Fixed Reset issue and regular maintenance firmware update

]]>

Fixed Reset issue and regular maintenance firmware update

]]>

リセットの問題と定期的なメンテナンスファームウェアアップデートを修正しました。

]]>

Fixed Reset issue and regular maintenance firmware update.

]]>

Added support for SLES16

]]>

Added support for SLES16

]]>

Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.

Support firmware flash in OS FIPS enabled mode.

]]>

Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.

Support firmware flash in OS FIPS enabled mode.

]]>

RHEL 10のサポートを追加しました。

]]>

Added support for RHEL 10.

]]> SUSE Linux 15のCOMサポートを追加しました

]]> Added SUSE Linux 15 for COM support

]]> SUSE Linux 15のCOMサポートを追加しました

]]> Added SUSE Linux 15 for COM support

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> 1.5GBのMMCFGベースをサポートするための新しいRBSUサービスオプションを追加しました

OEM向け「Intelligent Provisioning」の警告メッセージの文言をアップデートしました。

]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア04.01.05.201と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

修正された問題：

システムiLOのリモートコンソールが、RBSUに警告メッセージが表示された場合に、応答しなくなる問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]>

ESXi9.1 support

]]>

ESXi9.1 support

]]>

論理ドライブ情報メニュー: ドライブ障害時に、障害が発生したデータドライブとアクティブなスペア間の関連付けを表示するように強化されました。

PLDM操作配列の標準化された操作プロパティのサポートが追加され、以下のようにスキーマ定義の操作列挙が提供されるようになりました。

– ドライブリソース — 再構築/サニタイズ/暗号化

– ボリュームリソース - 初期化/再構築/暗号化/RAIDLayoutの変更/ストリップサイズの変更/サイズ変更。

従来のOperationNameプロパティは引き続き使用可能ですが、現在は非推奨としてマークされています。

StorageControllerステータス条件ResetRecommendedおよびResetRequiredのサポートが追加されました。構成の変更を有効にするためにシステムの再起動が必要な場合、コントローラーは Status.Conditions と Redfishイベントメッセージの両方を通じてステータスを報告します。
RDEエラーメッセージングが強化され、ボリュームDELETEおよびSED対応CREATE操作のエラー説明がより明確になり、一般的なExtendedInfo参照ではなく、応答ペイロードで直接詳細なメッセージが返されます。

]]>

Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.

"Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

– Drive Resource — Rebuild/Sanitize/Encrypt

– Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

The legacy OperationName property remains available and is now marked as deprecated."

Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.

]]>

自動交換スペア構成でメディア交換が承認されたときに、予期しない電源喪失後にドライブの再構築が再開されない問題を修正しました。

LOOSE_CABLE状態中にスペアの自動交換がアクティブ化され、データドライブが早期に交換され、ボリューム障害や潜在的なデータ整合性の問題が発生する可能性がある問題を修正しました。

RAID 1構成で4Kランダム書き込みワークロードの整合性チェック中に大容量HDDのIOPSが低下する可能性がある問題を修正しました。

キャッシュモジュール自体にエラーが発生していない限り、バッテリ障害が発生した場合に、ユーザーがバッテリ不要書き込みキャッシュ (NBWC) を有効にできる問題を修正しました。

BMCから発行されたATAパススルーIDENTIFY DEVICE (0xEC) コマンドが、転送長の処理が正しくないためにタイムアウトする可能性がある問題を修正しました。

非決定論的なドライブ順序付けによるSSDアレイ作成により、一部のドライブでAcceralted IOが誤って無効になり、パフォーマンスが低下する可能性がある問題を修正しました。

自動スペア交換が有効になっている状態でRAID再構築中に、ホットリムーブされたデータドライブの障害LEDが点灯しない問題を修正しました。

同じセッションに対して複数の帯域外管理要求が同時に送信された場合に、システムがロックアップコード0x1E00で応答しなくなる可能性がある問題を修正しました。

HIIディスクユーティリティメニューでドライブを一覧表示するときに、障害が発生したドライブまたは見つからないドライブが正しく示されない問題を修正しました。

ボリュームキャッシュまたはIOPerfModeEnabled機能をサポートしていない特定のコントローラーで PLDMタイプ6ボリュームの作成が失敗する可能性がある問題を修正しました。これらの機能を明示的に無効にするボリューム作成およびアップデート要求 (たとえば、キャッシュポリシーをOffに設定するか、IOPerfModeEnabledをfalseに設定する) は、正しく処理されるようになり、拒否されなくなりました。

元のプライマリボリュームがRDE CREATEによって作成されたときに、RDE READが分割ミラーバックアップボリュームをStandbyOfflineではなくEnabledとして誤って報告する可能性がある問題を修正しました。正確なステータスレポートを保証するために、ボリューム使用状況識別が修正されました。

特定のプラットフォーム上の SSDでDriveMetrics.PowerOnHoursが誤ってゼロとして報告される問題を修正しました。電源オン時間のレポートがドライブタイプ別にアップデートされ、NVMeドライブは DriveMetrics.NVMeSMART.PowerOnHoursでレポートし、SASおよびSATA HDDはnull値をレポートします。

]]>

Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.

Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.

Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.

Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.

Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.

Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.

Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.

Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.

Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.

Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.

Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.

Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type, NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2026.1 guidance.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2026.1 guidance.

Known Issues:

None]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

このバージョンは、IPU 2025.3ガイダンスに準拠しています。

既知の問題点：

なし]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2025.3 guidance.

Known Issues:

None]]>

Added support for SLES16.

]]>

Added support for SLES16.

]]>

RHEL 10のサポートを追加しました。

]]>

Added support for RHEL 10.

]]>

Regular FW maintenance release.

]]>

Regular FW maintenance release.

]]> このバージョンでは、以下の機能強化が追加されています。

Ubuntu 22.04LTSのサポートを追加しました
Ubuntu 24.04LTSのサポートを追加しました

]]> The following enhancement has been added in this version:

Added support of Ubuntu 22.04 LTS
Added support of Ubuntu 24.04 LTS.

]]> The following fixes were incorporated in this version:

The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.
The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.
Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.
If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]> The following fixes were incorporated in this version:

The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.
The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.
Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.
If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]> New drop for 6.60.8.0

]]>

Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels.

Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present.

Fixed an issue where a foreign-owned SED drive was being listed for array creation.

Fixed an issue where the last failure reason was not listing on physical drives.

Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode.

Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume.

Fixed an issue where a duplicate entry for the physical drive was displayed.

]]>

Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels.

Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present.

Fixed an issue where a foreign-owned SED drive was being listed for array creation.

Fixed an issue where the last failure reason was not listing on physical drives.

Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode.

Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume.

Fixed an issue where a duplicate entry for the physical drive was displayed.

]]> 重要な注意：

なし

ファームウェアの依存関係：

HPE ProLiant Gen10 Plusサーバーの場合、このバージョンにアップグレードするには、iLO5バージョン2.55以降が必要です。

機能強化/新しい機能：

大量の電力を消費するデバイスが導入された場合にマシンの電源障害を回避するために、特定の動作が変更されました。

修正された問題点：

なし

既知の問題点：

なし

]]> Important Notes:

None

Firmware Dependencies:

For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

Enhancements/New Features:

Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

Problems Fixed:

None

Known Issues:

None

]]> 重要な注意：

なし

ファームウェアの依存関係：

HPE ProLiant Gen10 Plusサーバーの場合、このバージョンにアップグレードするには、iLO5バージョン2.55以降が必要です。

機能強化/新しい機能：

大量の電力を消費するデバイスが導入された場合にマシンの電源障害を回避するために、特定の動作が変更されました。

修正された問題点：

なし

既知の問題点：

なし

]]> Important Notes:

None

Firmware Dependencies:

For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

Enhancements/New Features:

Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

Problems Fixed:

None

Known Issues:

None

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

Known Issues:

None]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

改善点/新しい機能:

システムROMのこのリビジョンには、AMD第3世代EPYCプロセッサー用のAMD参照コードMilanPI 1.0.0.Hが含まれています。

システムROMのこのリビジョンには、AMD第2世代EPYCプロセッサー用のAMDリファレンスコードRomePI 1.0.0.Nが含まれています。

既知の問題点：

なし]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

Known Issues:

None]]> この製品は、新しいファームウェアとの互換性を強化しました。

]]> This product enhanced the compatibility with the new firmware.

]]> この製品は、新しいファームウェアとの互換性を強化しました。

]]> This product enhanced the compatibility with the new firmware.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]>

Updated setup utility dependencies

]]>

Updated setup utility dependencies

]]>

サポート環境をアップデートしました

]]>

Updated supported environments

]]>

Updated setup utility dependencies

]]>

Updated setup utility dependencies

]]>

サポート環境をアップデートしました

]]>

Updated Supported Environments

]]>

Added Azure Local 24H2 OS support.

]]>

Added Azure Local 24H2 OS support.

]]>

Support Azure Stack HCI 23H2.

]]>

Support Azure Stack HCI 23H2.

]]>

SLES16のサポートを追加しました。

]]>

Added support for SLES16.

]]>

RHEL 10のサポートを追加しました。

]]>

Added support for RHEL 10.

]]>

Added support for SLES16.

]]>

Added support for SLES16.

]]> RHEL 10のサポートを追加しました

]]> Added Support for RHEL 10

]]>

Corrective actions to fix potential background media scan issue.

Support firmware flash in OS FIPS enabled mode.

]]>

Corrective actions to fix potential background media scan issue.

Support firmware flash in OS FIPS enabled mode.

]]>

Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.

Support firmware flash in OS FIPS enabled mode.

]]>

Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.

Support firmware flash in OS FIPS enabled mode.

]]> MarSPP2026

]]> この製品は、ファームウェアとの互換性を強化しました。

]]> This product enhanced the compatibility with firmware.

]]> MarSPP2026

]]> This Firmware package contains following firmware versions:

Adapter	Speed	MBI	Firmware	UEFI	Boot Bios
HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter	64Gb	02.11.09	09.15.15	7.39	0.0

]]> This Firmware package contains following firmware versions:

Adapter	Speed	MBI	Firmware	UEFI	Boot Bios
HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter	16Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.05.01	9.15.05	7.28	3.68
HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter	32Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter	32Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter	64Gb	02.11.09	09.15.15	7.39	0.0
HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter	64Gb	02.11.09	09.15.15	7.39	0.0

]]> 次のデバイス用のファームウェアが14.32.1908にアップデートされました。

817749-B21 (HPE Ethernet 25Gb 2ポート640FLR-SFP28アダプター)
817753-B21 (HPE Ethernet 25Gb 2ポート640SFP28アダプター)

次のデバイス用のファームウェアが16.35.8002にアップデートされました。

874253-B21（HPE Ethernet 100Gb 1ポート842QSFP28アダプター）

バージョン14.32.1908には、以下の新機能と変更が含まれます。

このリリースには、重要な信頼性の向上とセキュリティ強化の機能強化が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨しています。

バージョン16.35.8002には、以下の新機能と変更が含まれます。

ファームウェア例外パス処理のパフォーマンスが向上し、構成されたSR-IOVインスタンスの数の増加をより適切にサポートできるようになりました。
このリリースには、重要な信頼性の向上とセキュリティ強化の機能強化が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨しています。

]]> Firmware for the following devices has been updated to 14.32.1908:

817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

Firmware for the following device has been updated to 16.35.8002:

874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

New features and changes included in version 14.32.1908:

This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

New features and changes included in version 16.35.8002:

Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> バージョン14.32.1908には修正は含まれていません。

以下の問題点がバージョン16.35.8002で修正されました。

FWがCQ回復モードに入った後、ファームウェアはPFの正しいCQをスキャンできませんでした。その結果、PFのCQが回復されませんでした。

]]> No fixes are included in version 14.32.1908.

The following issues have been fixed in version 16.35.8002:

Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.

]]> 次のデバイス用のファームウェアが14.32.1904にアップデートされました。

817749-B21 (HPE Ethernet 25Gb 2ポート640FLR-SFP28アダプター)
817753-B21 (HPE Ethernet 25Gb 2ポート640SFP28アダプター)

次のデバイス用のファームウェアが16.35.4506にアップデートされました。

874253-B21（HPE Ethernet 100Gb 1ポート842QSFP28アダプター）

セキュリティ強化の機能改善
このリリースには、重要な信頼性の向上とセキュリティ強化の機能改善が含まれています。NVIDIAでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨しています。

ファームウェアバージョン14.32.1904には、新機能や変更は含まれていません。

バージョン16.35.4506には、以下の新機能と変更が含まれます。

MLNX OEM CMD 0x0032 (デバッグ情報の取得) に、4バイト境界となるようにアドレス検証を追加しました。

]]> Firmware for the following devices has been updated to 14.32.1904:

817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

Firmware for the following device has been updated to 16.35.4506:

874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

Security Hardening Enhancements
This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

No new features or changes have been included in firmware version 14.32.1904.

New features and changes included in version 16.35.4506:

Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.

]]> 以下の問題点がファームウェアのバージョン14.32.1904で修正されました：

QoS設定がないと、接続が中断され、パケットがドロップされます。

以下の問題点がファームウェアのバージョン16.35.4506で修正されました：

GLOBAL一時停止機能が無効になっている場合、不正なMPLSパケット破棄フローが発生していました。

]]> The following issues have been fixed in firmware version 14.32.1904:

Missing QoS settings caused connectivity disruptions and packet drops.

The following issues have been fixed in firmware version 16.35.4506:

Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.

]]>

Added support for Azure Local 24H2.

]]>

Added support for Azure Local 24H2.

]]>

POHが6.5年を超えた後に発生する可能性のあるドライブハングの問題を修正しました。ご不便をおかけしないためにも、できるだけ早くFWをアップデートすることをお勧めします。

詳しくは、推定発効日2024年8月9日のHPE Customer Bulletin（https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us）を参照してください。

]]>

Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.

For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us with the estimated effective date 2024/8/9

]]>

Azure Stack HCI 23H2のサポートを追加しました

]]>

Added support for Azure Stack HCI 23H2.

]]>

詳しくは、推定発効日2024年8月9日のHPE Customer Bulletin（https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us）を参照してください。

]]>

Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.

For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us with the estimated effective date 2024/8/9

]]> 重要な注意：

このバージョンのServer Platform Services (SPS) ファームウェアには、Intel製品アップデート (IPU) バージョンIPU.2025.3ガイダンスに沿ったアップデートが含まれています。このバージョンのSPS 04.01.05.201は、システムROM 3.60 (08/06/2025) 以降と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

このバージョンは、IPU 2025.3ガイダンスに準拠しています。

既知の問題点：

なし]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 04.01.05.201 should be paired with System ROM 3.60 (08/06/2025) or later.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2025.3 guidance.

Known Issues:

None]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

このバージョンは、IPU 2025.3ガイダンスに準拠しています。

既知の問題点：

なし]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2025.3 guidance.

Known Issues:

None]]> The following fixes were incorporated in this version:

Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
PSU version is showing as "No Ver" after inserted the New bel power PSU.
GEM_5_2 Coverity defect fix.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]> The following fixes were incorporated in this version:

Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
PSU version is showing as "No Ver" after inserted the New bel power PSU.
GEM_5_2 Coverity defect fix.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]> The following fixes were incorporated in this version:

Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
PSU version is showing as "No Ver" after inserted the New bel power PSU.
GEM_5_2 Coverity defect fix.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]> The following fixes were incorporated in this version:

Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
PSU version is showing as "No Ver" after inserted the New bel power PSU.
GEM_5_2 Coverity defect fix.

Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

]]>

Added Support for ESXi 9.1

]]>

Added Support for ESXi 9.1

]]>

ESXi 9.0のサポートを追加しました

]]>

Added support for ESXi 9.0

]]>

SR 2.10.2/SR 3.5.2 RC

]]>

SR 2.10.2/SR 3.5.2 RC

]]>

Fix windows tool cert expire issue.

]]>

Fix windows tool cert expire issue.

]]>

Optimize thermal maximum continuous operation temperature values

]]>

Optimize thermal maximum continuous operation temperature values

]]> この製品は、ドライバーとの互換性を強化しました。

]]> This product enhanced the compatibility with drivers.

]]> This product fixed the ESXi 9.1 supported issue.

]]> この製品は、ドライバーとの互換性を強化しました。

]]> This product enhanced the compatibility with drivers.

]]> この製品は、新しいファームウェアとの互換性を強化しました。

]]> This product enhanced the compatibility with the new firmware.

]]> この製品は、新しいファームウェアとの互換性を強化しました。

]]> This product enhanced the compatibility with the new firmware.

]]>

Firmware addresses a hot plug reporting concern

]]>

Firmware addresses a hot plug reporting concern

]]> This product now supports Red Hat Enterprise Linux 9.7

]]> この製品は、現在Red Hat Enterprise Linux 9.6をサポートします。

]]> This product now supports Red Hat Enterprise Linux 9.6.

]]> この製品は、エラーメッセージ「kernel BUG at mm/vmalloc.c:2727!」が表示される問題を修正します。

]]> This product fixes an issue where the error msg "kernel BUG at mm/vmalloc.c:2727!" appears.

]]> 最初のリリースです

]]> Initial release

]]> 最初のリリースです

]]> Initial release

]]>

Added support for Azure Local 24H2

]]>

Added support for Azure Local 24H2

]]>

Azure Stack HCI 23H2のサポートを追加しました

]]>

Added support for Azure Stack HCI 23H2.

]]> RC drop 6.60.8.0.

]]>

Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels.

Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present.

Fixed an issue where a foreign-owned SED drive was being listed for array creation.

]]>

Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels.

Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present.

Fixed an issue where a foreign-owned SED drive was being listed for array creation.

]]> システムROMのこのリビジョンには、AMD第2世代EPYCプロセッサー用のAMDリファレンスコードRomePI 1.0.0.Pが含まれています。

システムROMのこのリビジョンには、AMD第1世代EPYCプロセッサー用のAMDリファレンスコードNaplesPI 1.0.0.Sが含まれています。

]]> This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

]]> 重要な注意：

システムROMのこのリビジョンには、AMD第2世代EPYCプロセッサー用のAMDリファレンスコードRomePI 1.0.0.Pが含まれています。システムROMのこのリビジョンには、AMD第1世代EPYCプロセッサー用のAMDリファレンスコードNaplesPI 1.0.0.Sが含まれています。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題：

AMD第2世代「Rome」EPYCプロセッサーでSEV-SNP機能が失敗する問題に対処しました。

iLOのリモートコンソールが、RBSUメニューに警告メッセージが表示された場合に、応答しなくなる問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

Known Issues:

None]]> システムROMのこのリビジョンには、AMD第2世代EPYCプロセッサー用のAMDリファレンスコードRomePI 1.0.0.Pが含まれています。

システムROMのこのリビジョンには、AMD第1世代EPYCプロセッサー用のAMDリファレンスコードNaplesPI 1.0.0.Sが含まれています。

]]> This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの依存関係：

なし

修正された問題：

AMD第2世代「Rome」EPYCプロセッサーでSEV-SNP機能が失敗する問題に対処しました。

iLOのリモートコンソールが、RBSUメニューに警告メッセージが表示された場合に、応答しなくなる問題に対処しました。

既知の問題点：

なし]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

Known Issues:

None]]> Initial version

]]> Initial version

]]>

Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.

]]>

Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.

]]>

Implements FW-based VPD.

ARP setting is changed from “Capable & Discoverable” to “Fixed & Discoverable”.

A minor tweak to the Foreground Media Scan (FMS) algorithm to ensure critical variables are initialized properly.

]]>

Implements FW-based VPD.

ARP setting is changed from “Capable & Discoverable” to “Fixed & Discoverable”.

A minor tweak to the Foreground Media Scan (FMS) algorithm to ensure critical variables are initialized properly.

]]> Initial version

]]>

This firmware release provides additional protection against command timeouts.

]]>

This firmware release provides additional protection against command timeouts.

]]> Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

Known Issues:

None]]> 重要な注意：

このバージョンのシステムROMには、インテル製品アップデート（IPU）バージョンIPU.2025.3ガイダンスに沿ったアップデートが含まれています。このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア05.01.05.103と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

このバージョンは、IPU 2025.3ガイダンスに準拠しています。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2025.3 guidance.

Known Issues:

None]]> Feature Change: Removal of virtualization/SRIOV feature.

]]> Feature Change: Removal of virtualization/SRIOV feature.

]]>

This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters

This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers

]]>

This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters

This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers

]]>

This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters

This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers

]]>

This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters

This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers

]]> 重要な注意：

このバージョンのServer Platform Services (SPS) ファームウェアには、Intel製品アップデート (IPU) バージョンIPU.2025.1ガイダンスに沿ったアップデートが含まれています。このバージョンのSPS 05.01.05.005は、システムROM 3.50 (01/16/2025) 以降と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの関連性：

なし

機能強化/新しい機能:

このバージョンは、IPU.2025.1ガイダンスに準拠しています。

既知の問題点：

なし]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2025.1 guidance.

Known Issues:

None]]>

Added support for SLES16

]]>

Added support for SLES16

]]>

Improve the FW about data mismatch after SPL issued

]]>

Improve the FW about data mismatch after SPL issued

]]>

RHEL10のサポートを追加しました。

]]>

Added support for RHEL10.

]]>

Added support for SLES16

]]>

Added support for SLES16

]]>

Fixed an incompatibility issue in MCTP over PCIe VDM function

Updated WCTEMP value for thermal throttling threshold

Fixed CA https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00130699en_us

]]>

Fixed an incompatibility issue in MCTP over PCIe VDM function

Updated WCTEMP value for thermal throttling threshold

Fixed CA https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00130699en_us

]]>

RHEL 10のサポートを追加しました。

]]>

Added support for RHEL 10.

]]>

Updated setup utility dependencies

]]>

Updated setup utility dependencies

]]>

サポート環境をアップデートしました

]]>

Updated Supported Environments

]]> This version is in compliance with IPU 2025.3 guidance.

]]> Important Notes:

This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

Known Issues:

None]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、リンクセキュリティ報告ライブラリ | HPEサポートを参照してください。

ファームウェアの関連性：

なし

機能強化/新しい機能:

このバージョンは、IPU.2025.1ガイダンスに準拠しています。

既知の問題点：

なし]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2025.1 guidance.

Known Issues:

None]]> MarSPP2026

]]> MarSPP2026

]]> This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

]]>

This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters

This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers

]]>

This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters

This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers

]]>

This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters

This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers

]]>

This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters

This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers

]]>

Support Gen12 servers.

]]>

Support Gen12 servers.

]]> For Gen11 PR3 & 2023 March MSB

]]>

Improve the FW about data mismatch after SPL

]]>

Improve the FW about data mismatch after SPL

]]>

Firmware changes aligned for future FIPS code release and one assert fix.

]]>

Firmware changes aligned for future FIPS code release and one assert fix.

]]> この製品は、Azure Local 24H2 をサポートします。

]]> This product now supports Azure Local 24H2.

]]> Windows Server 2025のサポートを追加

]]> Add Windows Server 2025 support.

]]> Initial version

]]>

Added support for ESXi 9.1

]]>

Added support for ESXi 9.1

]]>

ESXi 9.0のサポートを追加しました

]]>

Added support for ESXi 9.0

]]> New features and changes included in version 20.43.8002:

This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> New features and changes included in version 20.43.8002:

This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> The following issues have been fixed in version 20.43.8002:

Enabling DIM led to high IRQ/s in certain scenarios.

]]> The following issues have been fixed in version 20.43.8002:

Enabling DIM led to high IRQ/s in certain scenarios.

]]> バージョン20.43.2566には、変更も新機能も含まれていません。

]]> No changes or new features have been included in version 20.43.2566.

]]> 以下の問題点がバージョン20.43.2566で修正されました：

SMPアクセスレジスターMADの使用時にSLRGレジスターが読み取り不能になる問題を解決しました。

]]> The following issues have been fixed in version 20.43.2566:

Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.

]]> このバージョンは、IPU 2025.3ガイダンスに準拠しています。

]]> This version is in compliance with IPU 2025.3 guidance.

]]> 重要な注意：

このバージョンのServer Platform Services (SPS) ファームウェアには、Intel製品アップデート (IPU) バージョンIPU.2025.3ガイダンスに沿ったアップデートが含まれています。このバージョンのSPS 05.01.05.103は、システムROM 3.70 (08/06/2025) 以降と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

修正された問題点:

Server Platform Servicesファームウェアのこのリビジョンは、CVE-2025-20067として文書化されているセキュリティ上の脆弱性を緩和します。この問題は、HPEサーバーに固有のものではありません。

既知の問題点：

なし]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

Known Issues:

None]]> このバージョンは、IPU 2025.3ガイダンスに準拠しています。

]]> This version is in compliance with IPU 2025.3 guidance.

]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

修正された問題点:

既知の問題点：

なし]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

Known Issues:

None]]>

この製品は、ブレークアウトモードで、モジュールが時間内にDPDeactivated (データパス非アクティブ化) 状態を終了しなかったために、ケーブルの取り外しまたは挿入によってリンクが起動できなかった問題を修正しました。

この製品は、ベンダーPN SP7053-HPE と「HPE 10GBASE-T SFP+ 30m RJ45 トランシーバー」HPE PN 813874-B21を使用しているときに、再起動後にアダプターがリンクを確立できない問題を修正します。

]]>

This product fixes the issue where, in breakout mode, a cable remove or insert failed to bring the link up because the module did not exit the DPDeactivated (Data Path Deactivated) state in time.

This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.

]]>

This product fixes the issue where, in breakout mode, a cable remove or insert failed to bring the link up because the module did not exit the DPDeactivated (Data Path Deactivated) state in time.

This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.

]]> For windows 2019 driver only.

]]>

Windows Server 2025のサポートを追加しました。

Windows Server 2025のDMA再マッピング機能を有効にするサポートが追加されました。

]]>

Added support for Windows Server 2025.

Added support to enable DMA remapping feature for Windows Server 2025.

]]>

リモートキー管理モードが有効になっている場合にメモリダンプをキャプチャーできない場合がある問題を修正しました。

]]>

Fixed the issue that memory dump sometimes cannot be captured when Remote Key Management mode is enabled.

]]> MarSPP2026

]]> この製品は、ネットワークトラフィックのないens-interruptモードでEnsNetWorlds CPU使用率が高くなる問題を修正します。

]]> This product fixes an issue where the High EnsNetWorlds CPU usage occurs for ens-interrupt mode with no network traffic.

]]>

Added support for Azure Local 24H2.

]]>

Added support for Azure Local 24H2.

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]>

Azure Stack HCI 23H2のサポートを追加しました

]]>

Added support for Azure Stack HCI 23H2

]]>

コントローラーライブラリの互換性の問題を修正しました。

]]>

Fix the controller library compatible issue.

]]> MarSPP2026

]]>

Fixes Maximum Temperature Reporting in system log.

]]>

Fixes Maximum Temperature Reporting in system log.

]]>

Added Support for ESXi 9.1

]]>

Added Support for ESXi 9.1

]]>

Added support for ESXi 9.0

]]>

Added support for ESXi 9.0

]]> この製品は、INF ファイルをアップデートして、DmaRemappingcompatible 機能を値 2 で有効にするように修正します。

]]> This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

]]> この製品は、INF ファイルをアップデートして、DmaRemappingcompatible 機能を値 2 で有効にするように修正します。

]]> This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

]]> MarSPP2026

]]> This product enhanced traffic flow in queue map rebalance.

]]>

Added support for ESXi 9.1

]]>

Added support for ESXi 9.1

]]>

ESXi 9.0のサポートを追加しました

]]>

Added support for ESXi 9.0

]]>

直接接続されたNVMeファームウェアのフラッシュの表示メッセージを修正し、OSによるFWアクティベーションの結果を揃えます。

]]>

Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

Known Issues:

None]]> 1.5GBのMMCFGベースをサポートするための新しいRBSUサービスオプションを追加しました

OEM向け「Intelligent Provisioning」の警告メッセージの文言をアップデートしました。

システム構成 > BIOS/プラットフォーム構成 (RBSU) > 電力およびパフォーマンスオプションにCPU C1自動降格/自動降格解除オプションを追加しました。

]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア04.04.04.802（2.50_07_24_2025）と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

修正された問題：

Intel I350-T4 OCP NICを使用しているときに、レガシーモードでのシステムPXEブートが失敗する可能性がある問題に対処しました。

Linuxの起動中にシステムが誤った割り込みメッセージを表示する可能性がある問題に対処しました。

システムiLOのリモートコンソールが、RBSUに警告メッセージが表示された場合に、応答しなくなる問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

Addressed an issue where the system might display spurious interrupt message during Linux boot up.

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> 1.5GBのMMCFGベースをサポートするための新しいRBSUサービスオプションを追加しました

OEM向け「Intelligent Provisioning」の警告メッセージの文言をアップデートしました。

]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> 重要な注意：

このバージョンのシステムROMは、Server Platform Services（SPS）ファームウェア04.01.05.201と組み合わせる必要があります。

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

修正された問題：

システムiLOのリモートコンソールが、RBSUに警告メッセージが表示された場合に、応答しなくなる問題に対処しました。

既知の問題点：

なし]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]> Important Notes:

Ver. 1.0.0.22(F) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision F if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

Known Issues:

None

]]> Important Notes:

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

Known Issues:

None

]]> 重要な注意：

Ver 1.0.0.22(C)には、ファームウェアのパッケージングに対するアップデートが含まれており、機能的にver 1.0.0.22と同等です。ファームウェアをバージョン1.0.0.22にアップグレードするために以前のリビジョンのコンポーネントが使われた場合は、リビジョンCにアップグレードする必要はありません。

ファームウェアの依存関係:

なし

修正された問題点：

Innovation Engine（IE）が24時間ごとに不適切にリセットされる可能性がある問題に対処しました。

既知の問題点:

なし

]]> Important Notes:

Ver. 1.0.0.22(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

Known Issues:

None

]]>

Regular FW fix on assert, time-out, error log several fixes.

]]>

Regular FW fix on assert, time-out, error log several fixes.

]]>

FWアサートの修正およびその他の定期的なメンテナンスリリース。

]]>

FW assert fix and other regular maintenance release.

]]> MarSPP2026

]]> This product added E610 VF device ID.

]]> Changes included in product version 1.0.3(A):

Support added for VMWare ESXi 9.1.

New features and changes included in version 20.43.8002:

This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> Changes included in product version 1.0.3(A):

Support added for VMWare ESXi 9.1.

New features and changes included in version 20.43.8002:

This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> 以下の問題点がバージョン20.43.8002で修正されました：

DIMを有効にすると、特定のシナリオでIRQ/sが高くなります。

]]> The following issues have been fixed in version 20.43.8002:

Enabling DIM led to high IRQ/s in certain scenarios.

]]> バージョン20.43.8002には、以下の新機能と変更が含まれます。

このリリースには、重要な信頼性の向上とセキュリティ強化の機能強化が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨しています。

]]> New features and changes included in version 20.43.8002:

This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> 以下の問題点がバージョン20.43.8002で修正されました：

DIMを有効にすると、特定のシナリオでIRQ/sが高くなります。

]]> The following issues have been fixed in version 20.43.8002:

Enabling DIM led to high IRQ/s in certain scenarios.

]]>

7.36 (Aero PR11 Alpha).

]]>

7.36 (Aero PR11 Alpha).

]]>

工場再目的化操作を使用してユーザーがNVRAMをクリアするためのサポートを追加

コマンド: storcli /cx set factory repurpose

]]>

Add support for users to clear NVRAM using Factory Repurpose operation

Command: storcli /cx set factory repurpose

]]> 今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> 今回のリリースで解決した問題については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the issues resolved in this release.

]]> 今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> 今回のリリースで解決した問題については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the issues resolved in this release.

]]> Added ESXi 9.1 Supported Environment

]]>

This product fixed an HII defect where the “functionless default” overwrote modification information for the same flag field.

This product fixed an issue where BIOS failed to preserve greyed‑out options, preventing unintended writes.

]]>

This product fixed an HII defect where the “functionless default” overwrote modification information for the same flag field.

This product fixed an issue where BIOS failed to preserve greyed‑out options, preventing unintended writes.

]]> This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

]]> Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

Known Issues:

None]]> 重要な注意：

報告されたセキュリティ脆弱性とその緩和策の詳細については、次のリンクを参照してください。セキュリティ報告ライブラリ | HPE サポート。

ファームウェアの依存関係：

なし

機能強化/新しい機能：

このバージョンは、IPU 2025.3ガイダンスに準拠しています。

既知の問題点：

なし]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Enhancements/New Features:

This version is in compliance with IPU 2025.3 guidance.

Known Issues:

None]]>

Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.

For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us

]]>

Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.

For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us

]]>

Added support for ESXi 9.1

]]>

Added support for ESXi 9.1

]]>

ESXi 9.0のサポートを追加しました

]]>

Added support for ESXi 9.0

]]> MarSPP2026

]]> この製品は、ファームウェアとの互換性を強化しました。

]]> This product enhanced the compatibility with firmware.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]> ドライバーバージョン14.4.624.0にアップデートしました

rawドライバーファイルは、Smartコンポーネントを解凍し、その後Emulexインストーラーを解凍することによって取得することができます。次のコマンドを使用します。

elxdrvr-fc-version.exe /q2 extract=2

解凍されたファイルは次に置かれます。

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。例、

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]> Updated to driver version 14.4.624.0

The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer. Use this command:

elxdrvr-fc-version.exe /q2 extract=2

The extracted files are located:

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

Each kit folder has subsequent architecture folders with subsequent OS folders. For example,

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]> Updated installer digital signature validity

]]> ドライバーバージョン14.4.624.0にアップデートしました

elxdrvr-fc-version.exe /q2 extract=2

解凍されたファイルは次に置かれます。

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

各キットのフォルダーは、それに続くアーキテクチャーとOSフォルダーを持ちます。例、

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]> Updated to driver version 14.4.624.0

The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer. Use this command:

elxdrvr-fc-version.exe /q2 extract=2

The extracted files are located:

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

Each kit folder has subsequent architecture folders with subsequent OS folders. For example,

C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

]]>

ESXi9.1 support.

]]>

ESXi9.1 support.

]]>

ESXi9.0 OSをサポートします。

]]>

Support ESXi9.0 OS.

]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

Known Issues:

None]]> Important Notes:

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

Known Issues:

None]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

Addressed an issue where the system might display spurious interrupt message during Linux boot up.

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

Addressed an issue where the system might display spurious interrupt message during Linux boot up.

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]> Updated Driver version 10.02.15.00-k1

]]> Updated Driver version 10.02.15.00-k1

]]>

A minor reliability enhancement involving an extra head cleaning operation

Preventive corner-case and situational adjustments for a potential Read hang, rare weak read and some “housekeeping” items (display, command outputs, delay on power-up and log maintenance)

]]>

A minor reliability enhancement involving an extra head cleaning operation

Preventive corner-case and situational adjustments for a potential Read hang, rare weak read and some “housekeeping” items (display, command outputs, delay on power-up and log maintenance)

]]> 今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> 今回のリリースで解決した問題については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the issues resolved in this release.

]]> 今回のリリースで機能強化された内容については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the enhancements in this release.

]]> 今回のリリースで解決した問題については、AMSリリースノートを参照してください。

]]> See the AMS Release Notes for information about the issues resolved in this release.

]]> New features and changes included in version 20.43.8002:

This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> New features and changes included in version 20.43.8002:

This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

]]> The following issues have been fixed in version 20.43.8002:

Enabling DIM led to high IRQ/s in certain scenarios.

]]> The following issues have been fixed in version 20.43.8002:

Enabling DIM led to high IRQ/s in certain scenarios.

]]> 次のデバイス用のファームウェアが20.43.2566にアップデートされました。

HPE InfiniBand HDR/Ethernet 200Gb 1ポートQSFP56 PCIe3 x16 MCX653105A-HDATアダプター- P06154-B21
HPE InfiniBand HDR100/Ethernet 100Gb 1ポートQSFP56 PCIe3 x16 MCX653105A-ECATアダプター- P06250-B21
HPE InfiniBand HDR100/Ethernet 100Gb 2ポートQSFP56 PCIe3 x16 MCX653106A-ECATアダプター- P06251-B21

セキュリティ強化の機能改善 - このリリースには、重要な信頼性の向上とセキュリティ強化の機能改善が含まれています。HPEでは、デバイスのファームウェアのセキュリティと信頼性を向上させるために、デバイスのファームウェアをこのリリースにアップグレードすることを推奨します。

バージョン20.43.2566には、変更も新機能も含まれていません。

]]> Firmware for the following devices has been updated to 20.43.2566:

HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

No changes or new features have been included in version 20.43.2566.

]]> 以下の問題点がバージョン20.43.2566で修正されました：

SMPアクセスレジスターMADの使用時にSLRGレジスターが読み取り不能になる問題を解決しました。

]]> The following issues have been fixed in version 20.43.2566:

Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

Known Issues:

None]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> Added a new RBSU service option for supporting MMCFG base at 1.5GB

Updated the warning message wording of "Intelligent Provisioning" for OEM.

]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]> Important Notes:

This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

Firmware Dependencies:

None

Problems Fixed:

Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

Known Issues:

None]]>

Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.

"Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

– Drive Resource — Rebuild/Sanitize/Encrypt

– Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

The legacy OperationName property remains available and is now marked as deprecated."

Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.

]]>

Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.

"Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

– Drive Resource — Rebuild/Sanitize/Encrypt

– Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

The legacy OperationName property remains available and is now marked as deprecated."

Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.