RC drop 6.60.8.0.

]]> RC drop 6.60.8.0.

]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
  • Fixed an issue where the last failure reason was not listing on physical drives. 
  • Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode. 
  • Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume. 
  • Fixed an issue where a duplicate entry for the physical drive was displayed. 
    • ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
  • Fixed an issue where the last failure reason was not listing on physical drives. 
  • Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode. 
  • Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume. 
  • Fixed an issue where a duplicate entry for the physical drive was displayed. 
    • ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support ofRHEL 9.1 

    • Added support of SLES15 SP4

    ]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support ofRHEL 9.1 

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         For Jan 2026

    ]]>         For Jan 2026

    ]]>
  • Added SSD life expectancy monitoring. 
  • Added support to require privileged operations token for all RDE ACTION operations, including Drive.Reset and Storage.SetEncryptionKey, improving security for data-destructive actions. 
  • Added support to provide meaningful updateInterval values for Numeric Sensor PDRs, setting 5 seconds for controller temperature and 60 seconds for drive temperature sensors. 
  • Enhanced the calculation of CapacityBytes@Redfish.AllowableNumbers for Volume Capabilities. The maximum allowable value is now set to the larger of (a) the largest free space range on any existing array, or (b) the sum of unassigned drives with a common interface and media type. 
  • Enhanced DriveMetrics support by updating the schema version from 1.0.0 to 1.2.0, adding reporting for ReadIOKiBytes and WriteIOKiBytes properties. 
  • Added an enhancement to display drive vendor and model name as separate fields in the Disk Information menu, improving clarity and ease of drive identification. 
  • Added support to securely transfer encryption keys in remote key management mode. 
  • Enhanced drive writes cache status reporting in HII. 
    • ]]>
  • Added SSD life expectancy monitoring. 
  • Added support to require privileged operations token for all RDE ACTION operations, including Drive.Reset and Storage.SetEncryptionKey, improving security for data-destructive actions. 
  • Added support to provide meaningful updateInterval values for Numeric Sensor PDRs, setting 5 seconds for controller temperature and 60 seconds for drive temperature sensors. 
  • Enhanced the calculation of CapacityBytes@Redfish.AllowableNumbers for Volume Capabilities. The maximum allowable value is now set to the larger of (a) the largest free space range on any existing array, or (b) the sum of unassigned drives with a common interface and media type. 
  • Enhanced DriveMetrics support by updating the schema version from 1.0.0 to 1.2.0, adding reporting for ReadIOKiBytes and WriteIOKiBytes properties. 
  • Added an enhancement to display drive vendor and model name as separate fields in the Disk Information menu, improving clarity and ease of drive identification. 
  • Added support to securely transfer encryption keys in remote key management mode. 
  • Enhanced drive writes cache status reporting in HII. 
    • ]]>
  • Fixed an issue where SEDs reverting to foreign after controller reboot due to the otherwise owned flag not being saved to the datastore. 
  • Fixed an issue where firmware crash/lockup during NDSR (Non-Disruptive Software Reset) due to a NULL pointer reference when handling a failed drive during logical drive rebuilt. 
  • Fix 4Kn foreign SED being imported into a 512B logical drive due to incorrect failure handling, which could start a rebuild on an incompatible drive and ultimately fail. 
  • Fixed an issue where multiple logical drives incorrectly showing REBUILDING simultaneously due to rebuild status not being updated properly during queued transformation and rebuild processes 
  • Fixed an issue where master key change failure on Managed SED logical drives due to LU cache flush requests conflicting with the password update process. 
  • Fixed an issue where physical drive Predictive Failure status not reported correctly by tools and iLO. 
  • Fixed an issue where controller lockup during surface scan caused by stale internal resources when handling Unrecoverable Read Errors (UREs) in unmapped logical drive regions. 
  • Fixed an issue where uncorrectable DDR ECC errors could be reported at boot due to cache being accessed before initialization. 
  • Fixed an issue where the controller could lock up (0x3120C) when enabling MCP due to duplicate routing entries from flooded BMC requests. 
  • Fixed an issue where SATA drives could be incorrectly reported as hot-removed during spin-up by adjusting the dampen timer to align with vendor-specified TTR values. 
  • Fixed an issue where the controller could lock up (0x1E30) under high I/O workloads when configuration changes occurred simultaneously with a LUN reset. 
  • Fixed an issue where RAID 0 could hang with I/O timeouts and LUN resets during Predictive Spare Rebuild. 
  • Fixed an issue where the RAID controller could incorrectly report Online Firmware Activation as enabled. Firmware now checks support during PQI initialization and sets or clears the feature flags accordingly. 
  • Fixed an issue where drives in some enclosures could show bay number 255 after the enclosure was powered on and hot-plugged, by adding handling for additional SCSI not ready status codes until the enclosure becomes ready. 
  • Fixed an issue where Micron 6550 SED drives could fail to create a Secured Volume due to insufficient timeout during the TCG Revert process. 
  • Fixed an issue where the controller Health state from PLDM PDRs could differ from the Storage.Status.HealthRollup value in RDE, by synchronizing the reporting logic. 
  • Fixed an issue where SSD firmware updates could fail in dual path configurations due to PLDM errors, by sending Test Unit Ready commands to clear check conditions before SCSI passthrough operations. 
  • Fixed an issue where Battery Redfish Alerts contained an incorrect OriginOfCondition pointing to a StorageController instead of the Battery resource. 
  • Fixed an issue where RDE UPDATE operations on a Volume’s ReadCachePolicy could incorrectly appear successful during a CBE rekey, by adjusting the cache update logic to return accurate results regardless of cache status. 
  • Fixed an issue where the HotspareActivationPolicy allowable values incorrectly included OnDriveFailure for RAID 0 volumes with a dedicated spare, by adding configuration checks to ensure only valid values are shown. 
  • Fixed an issue where there is a mismatch in Overall Health State and Logical Volume State during RPI, with sensors reporting Warning (Overall Health) while RDE READs ( Logical Volume State) showed OK; reporting OK during RPI is exxpected behavior. 
  • Fixed an issue where ProtectedWriteBack could incorrectly appear as an allowable WriteCachePolicy in RDE READs even without a backup power source, by requiring the power source to be connected and fully charged before publishing the option. 
  • Fixed an issue where an RDE READ on certain unsupported Drive resources could cause a controller lockup, by adding bounds checking in the firmware API. 
  • Fixed an issue where deleting volumes through PLDM Type 6 could cause a controller lockup if other PLDM commands were sent simultaneously. These commands now return NOT_READY when a long-running RDE operation is in progress. 
  • Fixed an issue where disk utilities could display an invalid box number for drives after failing over to an alternative path, by ensuring only valid controller-provided information is shown. 
  • Fixed an issue where an incorrect error message was shown in HII when creating a logical drive on a locked SED, by updating the error message to correctly reflect SED encryption. 
    • ]]>
  • Fixed an issue where SEDs reverting to foreign after controller reboot due to the otherwise owned flag not being saved to the datastore. 
  • Fixed an issue where firmware crash/lockup during NDSR (Non-Disruptive Software Reset) due to a NULL pointer reference when handling a failed drive during logical drive rebuilt. 
  • Fix 4Kn foreign SED being imported into a 512B logical drive due to incorrect failure handling, which could start a rebuild on an incompatible drive and ultimately fail. 
  • Fixed an issue where multiple logical drives incorrectly showing REBUILDING simultaneously due to rebuild status not being updated properly during queued transformation and rebuild processes 
  • Fixed an issue where master key change failure on Managed SED logical drives due to LU cache flush requests conflicting with the password update process. 
  • Fixed an issue where physical drive Predictive Failure status not reported correctly by tools and iLO. 
  • Fixed an issue where controller lockup during surface scan caused by stale internal resources when handling Unrecoverable Read Errors (UREs) in unmapped logical drive regions. 
  • Fixed an issue where uncorrectable DDR ECC errors could be reported at boot due to cache being accessed before initialization. 
  • Fixed an issue where the controller could lock up (0x3120C) when enabling MCP due to duplicate routing entries from flooded BMC requests. 
  • Fixed an issue where SATA drives could be incorrectly reported as hot-removed during spin-up by adjusting the dampen timer to align with vendor-specified TTR values. 
  • Fixed an issue where the controller could lock up (0x1E30) under high I/O workloads when configuration changes occurred simultaneously with a LUN reset. 
  • Fixed an issue where RAID 0 could hang with I/O timeouts and LUN resets during Predictive Spare Rebuild. 
  • Fixed an issue where the RAID controller could incorrectly report Online Firmware Activation as enabled. Firmware now checks support during PQI initialization and sets or clears the feature flags accordingly. 
  • Fixed an issue where drives in some enclosures could show bay number 255 after the enclosure was powered on and hot-plugged, by adding handling for additional SCSI not ready status codes until the enclosure becomes ready. 
  • Fixed an issue where Micron 6550 SED drives could fail to create a Secured Volume due to insufficient timeout during the TCG Revert process. 
  • Fixed an issue where the controller Health state from PLDM PDRs could differ from the Storage.Status.HealthRollup value in RDE, by synchronizing the reporting logic. 
  • Fixed an issue where SSD firmware updates could fail in dual path configurations due to PLDM errors, by sending Test Unit Ready commands to clear check conditions before SCSI passthrough operations. 
  • Fixed an issue where Battery Redfish Alerts contained an incorrect OriginOfCondition pointing to a StorageController instead of the Battery resource. 
  • Fixed an issue where RDE UPDATE operations on a Volume’s ReadCachePolicy could incorrectly appear successful during a CBE rekey, by adjusting the cache update logic to return accurate results regardless of cache status. 
  • Fixed an issue where the HotspareActivationPolicy allowable values incorrectly included OnDriveFailure for RAID 0 volumes with a dedicated spare, by adding configuration checks to ensure only valid values are shown. 
  • Fixed an issue where there is a mismatch in Overall Health State and Logical Volume State during RPI, with sensors reporting Warning (Overall Health) while RDE READs ( Logical Volume State) showed OK; reporting OK during RPI is exxpected behavior. 
  • Fixed an issue where ProtectedWriteBack could incorrectly appear as an allowable WriteCachePolicy in RDE READs even without a backup power source, by requiring the power source to be connected and fully charged before publishing the option. 
  • Fixed an issue where an RDE READ on certain unsupported Drive resources could cause a controller lockup, by adding bounds checking in the firmware API. 
  • Fixed an issue where deleting volumes through PLDM Type 6 could cause a controller lockup if other PLDM commands were sent simultaneously. These commands now return NOT_READY when a long-running RDE operation is in progress. 
  • Fixed an issue where disk utilities could display an invalid box number for drives after failing over to an alternative path, by ensuring only valid controller-provided information is shown. 
  • Fixed an issue where an incorrect error message was shown in HII when creating a logical drive on a locked SED, by updating the error message to correctly reflect SED encryption. 
    • ]]>         The following new features and changes have been included in version 25.07-0.9.7.1:
     

    • Hardware Steering (HWS): Enabled HWS as a secondary option for the device steering mode. If Software Steering (SWS) is not supported, HWS will be used by default, assuming it is available. Firmware Steering (FW) will now serve as the default only when both SWS and HWS are unsupported.

    • Hardware-Managed Flow Steering (HMFS): HMFS is a new approach to managing steering rules, where STEs are written to the ICM by hardware instead of software (as in software-managed steering). This enables a higher rate of rule insertion.

    • Queue Affinity Bonding: Added support for 4-port bonding to allow users to add both p0 and p1 to a bond without requiring SSH access to the host or bringing down the driver beforehand.

    • Multiple Doorbells per PF: Increased the number of doorbells from 1 to 8, distributing them in a round-robin manner across channel send and receive queues. This enhancement improves scalability on multi-core systems with high packet rates by reducing MMIO contention on doorbell addresses. In high packet-rate scenarios, Sub-NUMA Clustering is also required to maintain consistent channel packet rates.

    • HQoS for Virtualization Solution: Added support for hierarchical group structures to enable multi-tier resource control, where parent groups enforce overall limits and child groups dynamically share available bandwidth. This design is essential for effective QoS enforcement, burst handling, and fair bandwidth allocation, ensuring workloads receive appropriate resources.

    • Number of lanes Configuration when Auto-Negotiation is Disabled: Added support for specifying the number of lanes (protocol width) when auto-negotiation is disabled. Since each combination of speed and lane count corresponds to a unique link mode, this allows the user to select a specific link mode when auto-negotiation is off. This change aligns with a recent firmware update that requires the driver to provide a single link mode, rather than a bitmap based on the user-defined speed.

    • Extend ODP Statistics with Operation Count: Added the following new page-granularity counters:
      • num_page_faults: counts the number of page fault events handled
      • num_invalidations: counts the number of page invalidation events handled
    ]]>         The following new features and changes have been included in version 25.07-0.9.7.1:
     

    • Hardware Steering (HWS): Enabled HWS as a secondary option for the device steering mode. If Software Steering (SWS) is not supported, HWS will be used by default, assuming it is available. Firmware Steering (FW) will now serve as the default only when both SWS and HWS are unsupported.

    • Hardware-Managed Flow Steering (HMFS): HMFS is a new approach to managing steering rules, where STEs are written to the ICM by hardware instead of software (as in software-managed steering). This enables a higher rate of rule insertion.

    • Queue Affinity Bonding: Added support for 4-port bonding to allow users to add both p0 and p1 to a bond without requiring SSH access to the host or bringing down the driver beforehand.

    • Multiple Doorbells per PF: Increased the number of doorbells from 1 to 8, distributing them in a round-robin manner across channel send and receive queues. This enhancement improves scalability on multi-core systems with high packet rates by reducing MMIO contention on doorbell addresses. In high packet-rate scenarios, Sub-NUMA Clustering is also required to maintain consistent channel packet rates.

    • HQoS for Virtualization Solution: Added support for hierarchical group structures to enable multi-tier resource control, where parent groups enforce overall limits and child groups dynamically share available bandwidth. This design is essential for effective QoS enforcement, burst handling, and fair bandwidth allocation, ensuring workloads receive appropriate resources.

    • Number of lanes Configuration when Auto-Negotiation is Disabled: Added support for specifying the number of lanes (protocol width) when auto-negotiation is disabled. Since each combination of speed and lane count corresponds to a unique link mode, this allows the user to select a specific link mode when auto-negotiation is off. This change aligns with a recent firmware update that requires the driver to provide a single link mode, rather than a bitmap based on the user-defined speed.

    • Extend ODP Statistics with Operation Count: Added the following new page-granularity counters:
      • num_page_faults: counts the number of page fault events handled
      • num_invalidations: counts the number of page invalidation events handled
    ]]>         The following issues have been fixed in version  25.07-0.9.7.1:

    • OFED installation caused CIFS to break in RHEL 8.4 and above. A dummy module was added so that CIFS will be disabled after OFED installation in RHEL 8.4 and above.
    • Performance degradation on older kernel versions using RX cache, particularly on slower ARM CPUs with larger RX buffers. The issue was caused by the driver attempting to allocate new RX pages too quickly, leading to head-of-line blocking in the RX cache. The fix improves RX cache usage by triggering page allocation for a bulk of at least 2 WQEs, allowing the application more time to process packets and return buffers to the RX cache, thereby reducing blocking and enhancing performance.
    • VF behavior was not aligned with /sys/class/net/<interface-name>/device/sriov_numvfs (silently ignore attempts to set the same number of VFs, and prevent changing the number of VFs until existing VFs are removed).
    • On BlueField-3 devices running linux-bluefield kernel versions 5.15.0-1050 or 5.15.0-1060, a kernel crash occurred due to a NULL pointer dereference in the cls_api network scheduler.
    ]]>         The following issues have been fixed in version  25.07-0.9.7.1:

    • OFED installation caused CIFS to break in RHEL 8.4 and above. A dummy module was added so that CIFS will be disabled after OFED installation in RHEL 8.4 and above.
    • Performance degradation on older kernel versions using RX cache, particularly on slower ARM CPUs with larger RX buffers. The issue was caused by the driver attempting to allocate new RX pages too quickly, leading to head-of-line blocking in the RX cache. The fix improves RX cache usage by triggering page allocation for a bulk of at least 2 WQEs, allowing the application more time to process packets and return buffers to the RX cache, thereby reducing blocking and enhancing performance.
    • VF behavior was not aligned with /sys/class/net/<interface-name>/device/sriov_numvfs (silently ignore attempts to set the same number of VFs, and prevent changing the number of VFs until existing VFs are removed).
    • On BlueField-3 devices running linux-bluefield kernel versions 5.15.0-1050 or 5.15.0-1060, a kernel crash occurred due to a NULL pointer dereference in the cls_api network scheduler.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         Fix build tool certification issue.

    ]]>         Fix build tool certification issue.

    ]]>         Support Gen10P ML30 server and Gen10 DL360/DL380 servers

    ]]>         Support Gen10P ML30 server and Gen10 DL360/DL380 servers

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00150197en_us.
    • ]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00150197en_us.
    • ]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
    • ]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         There are no enhancements in the current HPE iLO 5 v3.17 release.

    ]]>         There are no enhancements in the current HPE iLO 5 v3.17 release.

    ]]>         Fixed an issue where an improper shutdown was detected in the OS after HPE iLO firmware upgrade through COM.

    ]]>         Fixed an issue where an improper shutdown was detected in the OS after HPE iLO firmware upgrade through COM.

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    ]]>         Fixed the following :

    SFP Parameters value decimal part is truncated

    ]]>         Fixed the following :

    SFP Parameters value decimal part is truncated

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    ]]>         Added ESXi 9.1 Supported Environment

    ]]>         Added ESXi 9.1 Supported Environment

    ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number.
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
     
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number.
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
     
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number.
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
     
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number.
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
     
    • ]]>         Updated driver version to 9.4.11.20.

    ]]>         Updated driver version to 9.4.11.20.

    ]]>         Updated Driver and Installer Digital Signature Validity

    ]]>         Updated Driver and Installer Digital Signature Validity

    ]]>         This is the first driver for Windows 2025 . The driver version is 9.4.11.20.

    ]]>         This is the first driver for Windows 2025 . The driver version is 9.4.11.20.

    ]]>
  • Modified the SSACLI component version format to meet the new requirement from VMware ESXi for 9.1
  • Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares
  • Modified the default strip size for NVMe drives based on the Maximum Data Transfer Size (MDTS), and tools will set the default strip size to the minimum supported MDTS value when creating or migrating a logical drive
    • ]]>
  • Modified the SSACLI component version format to meet the new requirement from VMware ESXi for 9.1
  • Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares
  • Modified the default strip size for NVMe drives based on the Maximum Data Transfer Size (MDTS), and tools will set the default strip size to the minimum supported MDTS value when creating or migrating a logical drive
    • ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
  • Fixed an issue where the last failure reason was not listing on physical drives. 
  • Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode. 
  • Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume. 
  • Fixed an issue where a duplicate entry for the physical drive was displayed. 
    • ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
  • Fixed an issue where the last failure reason was not listing on physical drives. 
  • Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode. 
  • Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume. 
  • Fixed an issue where a duplicate entry for the physical drive was displayed. 
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • 8.16 AV2 PR2 GCA
    • ]]>
  • 8.16 AV2 PR2 GCA
    • ]]>
  • Change the backplane bay count information to the actual bay that is connected to controller.
  • Add support for users to clear NVRAM using Factory Repurpose operation
  • Re-order LSA GUI buttons
    • Move the Rebuild button to the top before Make Online button
    • Add the Rebuild button in the Offline Drive warning session
  • Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.
    • ]]>
  • Change the backplane bay count information to the actual bay that is connected to controller.
  • Add support for users to clear NVRAM using Factory Repurpose operation
  • Re-order LSA GUI buttons
    • Move the Rebuild button to the top before Make Online button
    • Add the Rebuild button in the Offline Drive warning session
  • Change the recommended action for Degarded Volume to “Make sure all the participating drives are connected and rebuild is complete”.
    • ]]>
  • Fix MRSA issue in a00150411en_us Advisory: HPE Compute MR Controllers - HPE MR Storage Administrator (MRSA) Launch Issue and Storage Command Line Interface (StorCLI) Installation Warning Message Observed With Red Hat Enterprise Linux Server 10
    • ]]>
  • Fix MRSA issue in a00150411en_us Advisory: HPE Compute MR Controllers - HPE MR Storage Administrator (MRSA) Launch Issue and Storage Command Line Interface (StorCLI) Installation Warning Message Observed With Red Hat Enterprise Linux Server 10
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>
  • Verified the UNMAP command and confirmed that the Block Limits VPD page data is correct with the latest firmware.
    • ]]>
  • Verified the UNMAP command and confirmed that the Block Limits VPD page data is correct with the latest firmware.
    • ]]>
  • Fix a potential mutex deadlock between reset and event handling thread. The issue may happen when there is heavy IO, device add/delete and SCSI rescan running in the same time.
    • ]]>
  • Fix a potential mutex deadlock between reset and event handling thread. The issue may happen when there is heavy IO, device add/delete and SCSI rescan running in the same time.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>         Added Support for RHEL 10

    ]]>         Added Support for RHEL 10

    ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during  Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during  Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
    • ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Fix drive flash issue when drive behind the controller in a specific scenario.
    • ]]>
  • Fix drive flash issue when drive behind the controller in a specific scenario.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>         Important Notes:

    Ver. 0.2.3.0(H) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision H if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 0.2.3.0(H) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision H if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 0.2.3.0(F) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision F if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 0.2.3.0(F) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision F if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.1.4(H) contains updates to the firmware packaging and is functionally equivalent to ver. 1.1.4. It is not necessary to upgrade with Revision H if a previous component revision was used to upgrade the firmware to version 1.1.4.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.1.4(H) contains updates to the firmware packaging and is functionally equivalent to ver. 1.1.4. It is not necessary to upgrade with Revision H if a previous component revision was used to upgrade the firmware to version 1.1.4.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Updated Driver version 10.02.14.00-k1

    ]]>         Updated Driver version 10.02.14.00-k1

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>
  • This product enhanced traffic flow in queue map rebalance.
  • This product enhanced  media type detection over PHY logic.
    • ]]>
  • This product enhanced traffic flow in queue map rebalance.
  • This product enhanced  media type detection over PHY logic.
    • ]]>         This product fixed the system event logging.

    ]]>         This product fixed the system event logging.

    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.8002:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Changes included in product version 1.0.2(A):

    • Support added for VMWare ESXi 9.1.

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.8002:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Changes included in product version 1.0.2(A):

    • Support added for VMWare ESXi 9.1.

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.8002:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.8002:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>
  • This product now supports Red Hat Enterprise Linux 9.7
    • ]]>
  • This product now supports Red Hat Enterprise Linux 9.7
    • ]]>
  • This product now supports Red Hat Enterprise Linux 9.6.
  • This product adds support for 25G AOC transceiver in link capability to support ethtool report.
    • ]]>
  • This product now supports Red Hat Enterprise Linux 9.6.
  • This product adds support for 25G AOC transceiver in link capability to support ethtool report.
    • ]]>         to be added

    ]]>         to be added

    ]]>         to be added

    ]]>         to be added

    ]]>         None

    ]]>         None

    ]]>         Fixed an issue where hponcfg was failing on Linux operating system with OpenSSL 3.X

    ]]>         Fixed an issue where hponcfg was failing on Linux operating system with OpenSSL 3.X

    ]]>
  • 7.36 Aero PR11 GCA
    • ]]>
  • 7.36 Aero PR11 GCA
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
    • ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>         Regular FW fix on assert, time-out, error log several fixes.

    ]]>         Regular FW fix on assert, time-out, error log several fixes.

    ]]>
  • Fix FW assert and other regular fixes
    • ]]>
  • Fix FW assert and other regular fixes
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>         Added ESXi 9.1 Supported Environment

    ]]>         Added ESXi 9.1 Supported Environment

    ]]>
  • This product fixed an HII defect where the “functionless default” overwrote modification information for the same flag field.
  • This product fixed an issue where BIOS failed to preserve greyed‑out options, preventing unintended writes.
    • ]]>
  • This product fixed an HII defect where the “functionless default” overwrote modification information for the same flag field.
  • This product fixed an issue where BIOS failed to preserve greyed‑out options, preventing unintended writes.
    • ]]>         This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

    ]]>         This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

    ]]>         Added support for vSphere 9.1 OS

    ]]>         Added support for vSphere 9.1 OS

    ]]>         Implement MSI interrupt in the ilo driver to fix PSOD due to interrupt storm and to fix snmpwalk delays.

    ]]>         Implement MSI interrupt in the ilo driver to fix PSOD due to interrupt storm and to fix snmpwalk delays.

    ]]>         Initial version

    ]]>         Initial version

    ]]>         Support Windows 2016 only.

    ]]>         Support Windows 2016 only.

    ]]>
  • Fixed the inconsistent I/O errors observed in MPIO enabled physical drives during cable plug/unplug events in multipath scenarios.
    • ]]>
  • Fixed the inconsistent I/O errors observed in MPIO enabled physical drives during cable plug/unplug events in multipath scenarios.
    • ]]>         Fix build tool certification issue.

    ]]>         Fix build tool certification issue.

    ]]>
  • Fix an issue that system may crash when importing Logical Drive.
    • ]]>
  • Fix an issue that system may crash when importing Logical Drive.
    • ]]>         Private release for specific customers.

    ]]>         Private release for specific customers.

    ]]>         Support SY480 Gen12 server.

    ]]>         Support SY480 Gen12 server.

    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>         Added Support for RHEL 10

    ]]>         Added Support for RHEL 10

    ]]>
  • Disabled Latency Tolerance Reporting Feature 
  • Drop MCTP command when interrupted by a Function Level Reset (FLR) 
    • ]]>
  • Disabled Latency Tolerance Reporting Feature 
  • Drop MCTP command when interrupted by a Function Level Reset (FLR) 
    • ]]>
  • Changes have been made in the 7500 firmware HPK6 over the previous firmware release to address Uncorrectable PCIe errors that are reported as ACS violations when Function Level Resets (FLR) are issued to the drive.
    If this firmware is not updated, errors will be reported in HPE’s iLO logging but there is no risk to user data or drive reliability. 
    • ]]>
  • Changes have been made in the 7500 firmware HPK6 over the previous firmware release to address Uncorrectable PCIe errors that are reported as ACS violations when Function Level Resets (FLR) are issued to the drive.
    If this firmware is not updated, errors will be reported in HPE’s iLO logging but there is no risk to user data or drive reliability. 
    • ]]>
  • Changes and improvements made in HPK1 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.
    • ]]>
  • Changes and improvements made in HPK1 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.01.05.105 should be paired with System ROM 3.40 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.01.05.105 should be paired with System ROM 3.40 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated supported environments
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>
  • This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.
  • This product fixed hang issue when run SCT tool with DriverModelTest.
    • ]]>
  • This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.
  • This product fixed hang issue when run SCT tool with DriverModelTest.
    • ]]>         TBD

    ]]>         TBD

    ]]>         This product added support to new Gen11 servers.

    ]]>         This product added support to new Gen11 servers.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         New features and changes included in version 22.46.3048:

    • Added support for RSS with crypto offload enabling the NIC to parallelize packet processing across CPU cores while performing encryption/decryption in hardware. Additionally, introduced a new l4_type_ext parameter with values: 0 (None), 1 (TCP), 2 (UDP), 3 (ICMP).
    • Added an extra validation for the payload_len field in incoming NC-SI messages. Previously, invalid packets might have been accepted; now, such packets are silently dropped.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 22.46.3048:

    • Added support for RSS with crypto offload enabling the NIC to parallelize packet processing across CPU cores while performing encryption/decryption in hardware. Additionally, introduced a new l4_type_ext parameter with values: 0 (None), 1 (TCP), 2 (UDP), 3 (ICMP).
    • Added an extra validation for the payload_len field in incoming NC-SI messages. Previously, invalid packets might have been accepted; now, such packets are silently dropped.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 22.46.3048:

    • Configuring a small MTU led to fragmentation of packets critical for the PXE boot process. As a result, the PXE boot filters mistakenly discarded these packets, causing the PXE boot to fail.
    ]]>         The following issues have been fixed in version 22.46.3048:

    • Configuring a small MTU led to fragmentation of packets critical for the PXE boot process. As a result, the PXE boot filters mistakenly discarded these packets, causing the PXE boot to fail.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No new features and changes have been included in version 22.45.1020.

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No new features and changes have been included in version 22.45.1020.

    ]]>         The following issues have been fixed in version 22.45.1020:

    • PCC_CNP_COUNT could not be reset using the pcc_counter.sh script in the DOCA tools.
    • VQoS algorithm issue related to learning when an element is active and when it begins sending traffic.
    • A race condition that would prevent the application from transmitting when VQoS was enabled.
    • Bandwidth would drop when unbinding multiple VFs with VQoS enabled.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         The following issues have been fixed in version 22.45.1020:

    • PCC_CNP_COUNT could not be reset using the pcc_counter.sh script in the DOCA tools.
    • VQoS algorithm issue related to learning when an element is active and when it begins sending traffic.
    • A race condition that would prevent the application from transmitting when VQoS was enabled.
    • Bandwidth would drop when unbinding multiple VFs with VQoS enabled.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Added SUSE Linux 15 for COM support

    ]]>         Added SUSE Linux 15 for COM support

    ]]>         Added SUSE Linux 15 for COM support

    ]]>         Added SUSE Linux 15 for COM support

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • ESXi9.1 support
    • ]]>
  • ESXi9.1 support
    • ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>         The following enhancement has been added in this version:

    • Added support of Ubuntu 22.04 LTS

    • Added support of Ubuntu 24.04 LTS.

    ]]>         The following enhancement has been added in this version:

    • Added support of Ubuntu 22.04 LTS

    • Added support of Ubuntu 24.04 LTS.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         New drop for 6.60.8.0

    ]]>         New drop for 6.60.8.0

    ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
  • Fixed an issue where the last failure reason was not listing on physical drives. 
  • Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode. 
  • Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume. 
  • Fixed an issue where a duplicate entry for the physical drive was displayed. 
    • ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
  • Fixed an issue where the last failure reason was not listing on physical drives. 
  • Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode. 
  • Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume. 
  • Fixed an issue where a duplicate entry for the physical drive was displayed. 
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Added Azure Local 24H2 OS support.
    • ]]>
  • Added Azure Local 24H2 OS support.
    • ]]>
  • Support Azure Stack HCI 23H2.
    • ]]>
  • Support Azure Stack HCI 23H2.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>         Added Support for RHEL 10

    ]]>         Added Support for RHEL 10

    ]]>
  • Corrective actions to fix potential background media scan issue.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Corrective actions to fix potential background media scan issue.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.8002:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.8002:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4506:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4506:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us with the estimated effective date 2024/8/9
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us with the estimated effective date 2024/8/9
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us with the estimated effective date 2024/8/9
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us with the estimated effective date 2024/8/9
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 04.01.05.201 should be paired with System ROM 3.60 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 04.01.05.201 should be paired with System ROM 3.60 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 04.01.05.201 should be paired with System ROM 3.60 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 04.01.05.201 should be paired with System ROM 3.60 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • SR 2.10.2/SR 3.5.2 RC
    • ]]>
  • SR 2.10.2/SR 3.5.2 RC
    • ]]>
  • Fix windows tool cert expire issue.
     
    • ]]>
  • Fix windows tool cert expire issue.
     
    • ]]>
  • Optimize thermal maximum continuous operation temperature values
    • ]]>
  • Optimize thermal maximum continuous operation temperature values
    • ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product fixed the ESXi 9.1 supported issue.

    ]]>         This product fixed the ESXi 9.1 supported issue.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>         This product now supports Red Hat Enterprise Linux 9.7

    ]]>         This product now supports Red Hat Enterprise Linux 9.7

    ]]>         This product now supports Red Hat Enterprise Linux 9.6.

    ]]>         This product now supports Red Hat Enterprise Linux 9.6.

    ]]>         This product fixes an issue where the error msg "kernel BUG at mm/vmalloc.c:2727!" appears.

    ]]>         This product fixes an issue where the error msg "kernel BUG at mm/vmalloc.c:2727!" appears.

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Initial release

    ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         RC drop 6.60.8.0.

    ]]>         RC drop 6.60.8.0.

    ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
    • ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
    • ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Initial version

    ]]>         Initial version

    ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
    • ]]>
  • Implements FW-based VPD.
  • ARP setting is changed from “Capable & Discoverable” to “Fixed & Discoverable”.
  • A minor tweak to the Foreground Media Scan (FMS) algorithm to ensure critical variables are initialized properly.
    • ]]>
  • Implements FW-based VPD.
  • ARP setting is changed from “Capable & Discoverable” to “Fixed & Discoverable”.
  • A minor tweak to the Foreground Media Scan (FMS) algorithm to ensure critical variables are initialized properly.
    • ]]>         Initial version

    ]]>         Initial version

    ]]>
  • This firmware release provides additional protection against command timeouts.
    • ]]>
  • This firmware release provides additional protection against command timeouts.
    • ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Improve the FW about data mismatch after SPL issued
    • ]]>
  • Improve the FW about data mismatch after SPL issued
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fixed an incompatibility issue in MCTP over PCIe VDM function
  • Updated WCTEMP value for thermal throttling threshold
  • Fixed CA https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00130699en_us
    • ]]>
  • Fixed an incompatibility issue in MCTP over PCIe VDM function
  • Updated WCTEMP value for thermal throttling threshold
  • Fixed CA https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00130699en_us
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Updated Supported Environments
    • ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • Support Gen12 servers.
    • ]]>
  • Support Gen12 servers.
    • ]]>         For Gen11 PR3 & 2023 March MSB

    ]]>         For Gen11 PR3 & 2023 March MSB

    ]]>
  • Improve the FW about data mismatch after SPL
    • ]]>
  • Improve the FW about data mismatch after SPL
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>         This product now supports Azure Local 24H2.

    ]]>         This product now supports Azure Local 24H2.

    ]]>         Add Windows Server 2025 support.

    ]]>         Add Windows Server 2025 support.

    ]]>         Initial version

    ]]>         Initial version

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>
  • This product fixes the issue where, in breakout mode, a cable remove or insert failed to bring the link up because the module did not exit the DPDeactivated (Data Path Deactivated) state in time.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
    • ]]>
  • This product fixes the issue where, in breakout mode, a cable remove or insert failed to bring the link up because the module did not exit the DPDeactivated (Data Path Deactivated) state in time.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
    • ]]>
  • This product fixes the issue where, in breakout mode, a cable remove or insert failed to bring the link up because the module did not exit the DPDeactivated (Data Path Deactivated) state in time.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
    • ]]>
  • This product fixes the issue where, in breakout mode, a cable remove or insert failed to bring the link up because the module did not exit the DPDeactivated (Data Path Deactivated) state in time.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
    • ]]>         For windows 2019 driver only.

    ]]>         For windows 2019 driver only.

    ]]>
  • Added support for Windows Server 2025.
  • Added support to enable DMA remapping feature for Windows Server 2025.
    • ]]>
  • Added support for Windows Server 2025.
  • Added support to enable DMA remapping feature for Windows Server 2025.
    • ]]>
  • Fixed the issue that memory dump sometimes cannot be captured when Remote Key Management mode is enabled.
    • ]]>
  • Fixed the issue that memory dump sometimes cannot be captured when Remote Key Management mode is enabled.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixes an issue where the High EnsNetWorlds CPU usage occurs for ens-interrupt mode with no network traffic.

    ]]>         This product fixes an issue where the High EnsNetWorlds CPU usage occurs for ens-interrupt mode with no network traffic.

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

    ]]>         This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

    ]]>         This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

    ]]>         This product fixes to update the INF file to enable the DmaRemappingCompatible feature with a value of 2.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    Ver. 1.0.0.22(F) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision F if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(F) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision F if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>
  • Regular FW fix on assert, time-out, error log several fixes.
    • ]]>
  • Regular FW fix on assert, time-out, error log several fixes.
    • ]]>
  • FW assert fix and other regular maintenance release.
    • ]]>
  • FW assert fix and other regular maintenance release.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product added E610 VF device ID.

    ]]>         This product added E610 VF device ID.

    ]]>         Changes included in product version 1.0.3(A):

    • Support added for VMWare ESXi 9.1.

     

    New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Changes included in product version 1.0.3(A):

    • Support added for VMWare ESXi 9.1.

     

    New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>
  • 7.36 (Aero PR11 Alpha).
    • ]]>
  • 7.36 (Aero PR11 Alpha).
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         Added ESXi 9.1 Supported Environment

    ]]>         Added ESXi 9.1 Supported Environment

    ]]>
  • This product fixed an HII defect where the “functionless default” overwrote modification information for the same flag field.
  • This product fixed an issue where BIOS failed to preserve greyed‑out options, preventing unintended writes.
    • ]]>
  • This product fixed an HII defect where the “functionless default” overwrote modification information for the same flag field.
  • This product fixed an issue where BIOS failed to preserve greyed‑out options, preventing unintended writes.
    • ]]>         This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

    ]]>         This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

    ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Updated to driver version 14.4.624.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Updated to driver version 14.4.624.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Updated installer digital signature validity

    ]]>         Updated installer digital signature validity

    ]]>         Updated to driver version 14.4.624.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Updated to driver version 14.4.624.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>
  • ESXi9.1 support.
    • ]]>
  • ESXi9.1 support.
    • ]]>
  • Support ESXi9.0 OS.
    • ]]>
  • Support ESXi9.0 OS.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>
  • A minor reliability enhancement involving an extra head cleaning operation
  • Preventive corner-case and situational adjustments for a potential Read hang, rare weak read and some “housekeeping” items (display, command outputs, delay on power-up and log maintenance)
    • ]]>
  • A minor reliability enhancement involving an extra head cleaning operation
  • Preventive corner-case and situational adjustments for a potential Read hang, rare weak read and some “housekeeping” items (display, command outputs, delay on power-up and log maintenance)
    • ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         Firmware for the following devices has been updated to 20.43.2566:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No changes or new features have been included in version 20.43.2566.

    ]]>         Firmware for the following devices has been updated to 20.43.2566:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         BCM235_GCA2

    ]]>         BCM235_GCA2

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
    • ]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>         New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    ]]>         No fixes are included in version 14.32.1908.

    ]]>         Firmware for the following device has been updated to 14.32.1904:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

    ]]>         Firmware for the following device has been updated to 14.32.1904:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.
    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Red Hat Enterprise Linux 9.6

    Updated Driver version 10.02.14.00-k1

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Red Hat Enterprise Linux 9.6

    Updated Driver version 10.02.14.00-k1

    ]]>         New features and changes included in version 26.46.3048:

    • Added support for RSS with crypto offload enabling the NIC to parallelize packet processing across CPU cores while performing encryption/decryption in hardware. Additionally, introduced a new l4_type_ext parameter with values: 0 (None), 1 (TCP), 2 (UDP), 3 (ICMP).
    • Added an extra validation for the payload_len field in incoming NC-SI messages. Previously, invalid packets might have been accepted; now, such packets are silently dropped.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 26.46.3048:

    • Added support for RSS with crypto offload enabling the NIC to parallelize packet processing across CPU cores while performing encryption/decryption in hardware. Additionally, introduced a new l4_type_ext parameter with values: 0 (None), 1 (TCP), 2 (UDP), 3 (ICMP).
    • Added an extra validation for the payload_len field in incoming NC-SI messages. Previously, invalid packets might have been accepted; now, such packets are silently dropped.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 26.46.3048:

    • Configuring a small MTU led to fragmentation of packets critical for the PXE boot process. As a result, the PXE boot filters mistakenly discarded these packets, causing the PXE boot to fail.
    ]]>         The following issues have been fixed in version 26.46.3048:

    • Configuring a small MTU led to fragmentation of packets critical for the PXE boot process. As a result, the PXE boot filters mistakenly discarded these packets, causing the PXE boot to fail.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    No new features and changes have been included in version 26.45.1020.

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    No new features and changes have been included in version 26.45.1020.

    ]]>         The following issues have been fixed in version 26.45.1020:

    • Configuring PHY_RATE_MASK for 10G in NV settings incorrectly disabled 10G capabilities.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         The following issues have been fixed in version 26.45.1020:

    • Configuring PHY_RATE_MASK for 10G in NV settings incorrectly disabled 10G capabilities.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • To fix - Frequent insertion of low priority commands during IO execution may lead to drive offline randomly.

    • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00141941en_us 

    ]]>
  • To fix - Frequent insertion of low priority commands during IO execution may lead to drive offline randomly.

    • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00141941en_us 

    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Red Hat Enterprise Linux 9.6

    Updated Driver version 10.02.14.00-k1

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Red Hat Enterprise Linux 9.6

    Updated Driver version 10.02.14.00-k1

    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Added support for:

    Red Hat Enterprise Linux 10.1

    Updated to version 14.4.731.6

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.1

    Updated to version 14.4.731.6

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>
  • This product fixed the system event logging on Windows Server 2022.
  • This product fixed the BSOD during the RX queue initialization.
    • ]]>
  • This product fixed the system event logging on Windows Server 2022.
  • This product fixed the BSOD during the RX queue initialization.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

    ]]>         This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

    ]]>
  • 8.16 AV2 PR2 GCA
    • ]]>
  • 8.16 AV2 PR2 GCA
    • ]]>
  • Updated component metadata.
    • ]]>
  • Updated component metadata.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us.
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us.
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us which will be active on 18-Aug-2025.
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us which will be active on 18-Aug-2025.
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixes the issue where the Firmeare update failed on 4 MB flash cards.
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixes the issue where the Firmeare update failed on 4 MB flash cards.
    • ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixes the issue where the Firmeare update failed on 4 MB flash cards.
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixes the issue where the Firmeare update failed on 4 MB flash cards.
    • ]]>         TBD

    ]]>         TBD

    ]]>         This product is updated to maintain compatibility with the latest firmware.

    ]]>         This product is updated to maintain compatibility with the latest firmware.

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         There are no enhancements in the current HPE iLO 5 v3.17 release.

    ]]>         There are no enhancements in the current HPE iLO 5 v3.17 release.

    ]]>         Fixed an issue where an improper shutdown was detected in the OS after HPE iLO firmware upgrade through COM.

    ]]>         Fixed an issue where an improper shutdown was detected in the OS after HPE iLO firmware upgrade through COM.

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>         The following new features and changes have been included in version 25.07-0.9.7.1:
     

    • Hardware Steering (HWS): Enabled HWS as a secondary option for the device steering mode. If Software Steering (SWS) is not supported, HWS will be used by default, assuming it is available. Firmware Steering (FW) will now serve as the default only when both SWS and HWS are unsupported.

    • Hardware-Managed Flow Steering (HMFS): HMFS is a new approach to managing steering rules, where STEs are written to the ICM by hardware instead of software (as in software-managed steering). This enables a higher rate of rule insertion.

    • Queue Affinity Bonding: Added support for 4-port bonding to allow users to add both p0 and p1 to a bond without requiring SSH access to the host or bringing down the driver beforehand.

    • Multiple Doorbells per PF: Increased the number of doorbells from 1 to 8, distributing them in a round-robin manner across channel send and receive queues. This enhancement improves scalability on multi-core systems with high packet rates by reducing MMIO contention on doorbell addresses. In high packet-rate scenarios, Sub-NUMA Clustering is also required to maintain consistent channel packet rates.

    • HQoS for Virtualization Solution: Added support for hierarchical group structures to enable multi-tier resource control, where parent groups enforce overall limits and child groups dynamically share available bandwidth. This design is essential for effective QoS enforcement, burst handling, and fair bandwidth allocation, ensuring workloads receive appropriate resources.

    • Number of lanes Configuration when Auto-Negotiation is Disabled: Added support for specifying the number of lanes (protocol width) when auto-negotiation is disabled. Since each combination of speed and lane count corresponds to a unique link mode, this allows the user to select a specific link mode when auto-negotiation is off. This change aligns with a recent firmware update that requires the driver to provide a single link mode, rather than a bitmap based on the user-defined speed.

    • Extend ODP Statistics with Operation Count: Added the following new page-granularity counters:
      • num_page_faults: counts the number of page fault events handled
      • num_invalidations: counts the number of page invalidation events handled
    ]]>         The following new features and changes have been included in version 25.07-0.9.7.1:
     

    • Hardware Steering (HWS): Enabled HWS as a secondary option for the device steering mode. If Software Steering (SWS) is not supported, HWS will be used by default, assuming it is available. Firmware Steering (FW) will now serve as the default only when both SWS and HWS are unsupported.

    • Hardware-Managed Flow Steering (HMFS): HMFS is a new approach to managing steering rules, where STEs are written to the ICM by hardware instead of software (as in software-managed steering). This enables a higher rate of rule insertion.

    • Queue Affinity Bonding: Added support for 4-port bonding to allow users to add both p0 and p1 to a bond without requiring SSH access to the host or bringing down the driver beforehand.

    • Multiple Doorbells per PF: Increased the number of doorbells from 1 to 8, distributing them in a round-robin manner across channel send and receive queues. This enhancement improves scalability on multi-core systems with high packet rates by reducing MMIO contention on doorbell addresses. In high packet-rate scenarios, Sub-NUMA Clustering is also required to maintain consistent channel packet rates.

    • HQoS for Virtualization Solution: Added support for hierarchical group structures to enable multi-tier resource control, where parent groups enforce overall limits and child groups dynamically share available bandwidth. This design is essential for effective QoS enforcement, burst handling, and fair bandwidth allocation, ensuring workloads receive appropriate resources.

    • Number of lanes Configuration when Auto-Negotiation is Disabled: Added support for specifying the number of lanes (protocol width) when auto-negotiation is disabled. Since each combination of speed and lane count corresponds to a unique link mode, this allows the user to select a specific link mode when auto-negotiation is off. This change aligns with a recent firmware update that requires the driver to provide a single link mode, rather than a bitmap based on the user-defined speed.

    • Extend ODP Statistics with Operation Count: Added the following new page-granularity counters:
      • num_page_faults: counts the number of page fault events handled
      • num_invalidations: counts the number of page invalidation events handled
    ]]>         The following issues have been fixed in version  25.07-0.9.7.1:

    • OFED installation caused CIFS to break in RHEL 8.4 and above. A dummy module was added so that CIFS will be disabled after OFED installation in RHEL 8.4 and above.
    • Performance degradation on older kernel versions using RX cache, particularly on slower ARM CPUs with larger RX buffers. The issue was caused by the driver attempting to allocate new RX pages too quickly, leading to head-of-line blocking in the RX cache. The fix improves RX cache usage by triggering page allocation for a bulk of at least 2 WQEs, allowing the application more time to process packets and return buffers to the RX cache, thereby reducing blocking and enhancing performance.
    • VF behavior was not aligned with /sys/class/net/<interface-name>/device/sriov_numvfs (silently ignore attempts to set the same number of VFs, and prevent changing the number of VFs until existing VFs are removed).
    • On BlueField-3 devices running linux-bluefield kernel versions 5.15.0-1050 or 5.15.0-1060, a kernel crash occurred due to a NULL pointer dereference in the cls_api network scheduler.
    ]]>         The following issues have been fixed in version  25.07-0.9.7.1:

    • OFED installation caused CIFS to break in RHEL 8.4 and above. A dummy module was added so that CIFS will be disabled after OFED installation in RHEL 8.4 and above.
    • Performance degradation on older kernel versions using RX cache, particularly on slower ARM CPUs with larger RX buffers. The issue was caused by the driver attempting to allocate new RX pages too quickly, leading to head-of-line blocking in the RX cache. The fix improves RX cache usage by triggering page allocation for a bulk of at least 2 WQEs, allowing the application more time to process packets and return buffers to the RX cache, thereby reducing blocking and enhancing performance.
    • VF behavior was not aligned with /sys/class/net/<interface-name>/device/sriov_numvfs (silently ignore attempts to set the same number of VFs, and prevent changing the number of VFs until existing VFs are removed).
    • On BlueField-3 devices running linux-bluefield kernel versions 5.15.0-1050 or 5.15.0-1060, a kernel crash occurred due to a NULL pointer dereference in the cls_api network scheduler.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>
  • Fixed an incompatibility issue in MCTP over PCIe VDM function
  • Updated WCTEMP value for thermal throttling threshold
    • ]]>
  • Fixed an incompatibility issue in MCTP over PCIe VDM function
  • Updated WCTEMP value for thermal throttling threshold
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
  • Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration.
    • ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
  • Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration.
    • ]]>         Updated to driver version 14.2.537.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2016

     

     

    ]]>         Updated to driver version 14.2.537.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2016

     

     

    ]]>         Updated Installer Digital signature validity

    ]]>         Updated Installer Digital signature validity

    ]]>         Updated to driver version 14.2.537.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2016

     

     

    ]]>         Updated to driver version 14.2.537.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2016

     

     

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixes the issue where the Firmeare update failed on BCM57416 4 MB flash cards .
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixes the issue where the Firmeare update failed on BCM57416 4 MB flash cards .
    • ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixes the issue where the Firmeare update failed on BCM57416 4 MB flash cards .
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixes the issue where the Firmeare update failed on BCM57416 4 MB flash cards .
    • ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product fixed the ESXi 9.1 supported issue.

    ]]>         This product fixed the ESXi 9.1 supported issue.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         BCM235_GCA2

    ]]>         BCM235_GCA2

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
    • ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>         Feature Change: Removal of virtualization/SRIOV feature.

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • 8.16 AV2 PR2 GCA
    • ]]>
  • 8.16 AV2 PR2 GCA
    • ]]>
  • Added new OS support for SUSE Linux Enterprise Server 16.
    • ]]>
  • Added new OS support for SUSE Linux Enterprise Server 16.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Initial version

    ]]>         Initial version

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
    • ]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0

     

    Added Following Enhancements:

    [Redfish]:HPE specific SFP Data - Predicted days for non working stage

    [Redfish]: API to read SFP Data
     

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0

     

    Added Following Enhancements:

    [Redfish]:HPE specific SFP Data - Predicted days for non working stage

    [Redfish]: API to read SFP Data
     

    ]]>         Fixed the following:

    SPDM - Get Certificate response returns out of bound values

    ]]>         Fixed the following:

    SPDM - Get Certificate response returns out of bound values

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product added E610 VF device ID.

    ]]>         This product added E610 VF device ID.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Added support for:

    Red Hat Enterprise Linux 9.7

    Updated to version 14.4.731.6

    ]]>         Added support for:

    Red Hat Enterprise Linux 9.7

    Updated to version 14.4.731.6

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>         New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Initial version

    ]]>         Initial version

    ]]>         Added SLES16 Support Environment

    ]]>         Added SLES16 Support Environment

    ]]>         Initial version for Red Hat Enterprise Linux 10 support.

    ]]>         Initial version for Red Hat Enterprise Linux 10 support.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         TBD

    ]]>         TBD

    ]]>
  • This product fixes the issue where ESXi Datastore not seen when NPAR is enabled.
  • This product fixes the issue where PSOD is seen when enable NPAR using 2 NICs.
    • ]]>
  • This product fixes the issue where ESXi Datastore not seen when NPAR is enabled.
  • This product fixes the issue where PSOD is seen when enable NPAR using 2 NICs.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None

    ]]>         Added SLES16 support

    ]]>         Added SLES16 support

    ]]>
  • Added RHEL10 support
    • ]]>
  • Added RHEL10 support
    • ]]>
  • 7.36 (Aero PR11 Alpha).
    • ]]>
  • 7.36 (Aero PR11 Alpha).
    • ]]>
  • Added new OS support for SUSE Linux Enterprise Server 16.
    • ]]>
  • Added new OS support for SUSE Linux Enterprise Server 16.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    ]]>         Fixed the following :

    SFP Parameters value decimal part is truncated

    ]]>         Fixed the following :

    SFP Parameters value decimal part is truncated

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    ]]>         Initial version

    ]]>         Initial version

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • This is a maintenance release that contains code improvements for CAP.TO and LED behavior.
    • ]]>
  • This is a maintenance release that contains code improvements for CAP.TO and LED behavior.
    • ]]>          This is an initial FW.

    ]]>          This is an initial FW.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • 7.36 (Aero PR11 PA3)
    • ]]>
  • 7.36 (Aero PR11 PA3)
    • ]]>
  • Added Azure Local 24H2 OS support
    • ]]>
  • Added Azure Local 24H2 OS support
    • ]]>

  • Fix windows tool cert expire issue.

    • ]]>

  • Fix windows tool cert expire issue.

    • ]]>
  • ESXi 9.1 support
    • ]]>
  • ESXi 9.1 support
    • ]]>
  • Added ESXi9.0 support.
    • ]]>
  • Added ESXi9.0 support.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Updated to version 9.4.11.20

    ]]>         Updated to version 9.4.11.20

    ]]>         Updated Driver and installer Digital signature validity 

    ]]>         Updated Driver and installer Digital signature validity 

    ]]>         Updated to version 9.4.11.20

    ]]>         Updated to version 9.4.11.20

    ]]>         Changes included in product version 1.0.2(A):

    • Support added for VMWare ESXi 9.1.

     

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Changes included in product version 1.0.2(A):

    • Support added for VMWare ESXi 9.1.

     

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    ]]>         No fixes are included in version 14.32.1908.

    ]]>         New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    ]]>         No fixes are included in version 14.32.1908.

    ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product added ethtool flags to disable MAC/VF source pruning in legacy mode.

    ]]>         This product added ethtool flags to disable MAC/VF source pruning in legacy mode.

    ]]>
  • This product fixed observed call trace during unloading driver when ts2phc is running.
  • This product fixed observed call trace with wrong unregistering devlink instance during removing driver.
    • ]]>
  • This product fixed observed call trace during unloading driver when ts2phc is running.
  • This product fixed observed call trace with wrong unregistering devlink instance during removing driver.
    • ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixed an intermittent traffic failure issue from a virtual function.

    ]]>         This product fixed an intermittent traffic failure issue from a virtual function.

    ]]>
  • This product now supports Red Hat Enterprise Linux 10.1
    • ]]>
  • This product now supports Red Hat Enterprise Linux 10.1
    • ]]>
  • This product now supports Red Hat Enterprise Linux 10.
  • This product adds support for 25G AOC transceiver in link capability to support ethtool report.
    • ]]>
  • This product now supports Red Hat Enterprise Linux 10.
  • This product adds support for 25G AOC transceiver in link capability to support ethtool report.
    • ]]>
  • RSOD issue fixed. RSOD was occurred during server power-on if enable the VROC.
    • ]]>
  • RSOD issue fixed. RSOD was occurred during server power-on if enable the VROC.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.01.05.105 should be paired with System ROM 3.40 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.01.05.105 should be paired with System ROM 3.40 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>         MarSpp2026

    ]]>         MarSpp2026

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         This product enhanced the compatibility with firmware.

    ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Updated SBOM requirement
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         Added support for EL8000s

    ]]>         Added support for EL8000s

    ]]>         SHA384 fix

    ]]>         SHA384 fix

    ]]>
  • Signed with SHA384
    • ]]>
  • Signed with SHA384
    • ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.8002:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
       

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

       

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.8002:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
       

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

       

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4506:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4506:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>
  • This product fixed the system event logging on Windows Server 2022.
  • This product fixed the BSOD during the RX queue initialization.
    • ]]>
  • This product fixed the system event logging on Windows Server 2022.
  • This product fixed the BSOD during the RX queue initialization.
    • ]]>         New features and changes included in version 28.47.1026:

    • Added Scaling Factor "read" field. To obtain correct values in mlxlink, MFT version 4.33.0 or later is required.
    • Added a recovery mechanism for I²C failures. In case of an I²C communication failure, the system now automatically attempts to recover and reinitialize the I/O expander to maintain continuous operation.
    • Added support for multiple lossless buffer configurations in PFC. The firmware now automatically calculates buffer sizes and maps priorities to their respective buffers.
    • Access control was added to ensure that only the VHCA instance that created a DPA partition is permitted to modify or delete it.
    • DPA TIMER functionality has been exposed through the MTCTR access register, allowing direct access by applications.
    • A new DPA Manifest mechanism was introduced to define and manage application permissions.
    • Enabled seamless metadata propagation across layers, allowing flow steering rules and packet processing logic to share contextual information such as flow identifiers, source context, or policy tags. It improves coordination between NIC and E-Switch pipelines, enabling more flexible traffic handling and advanced offload capabilities.
    • Added support for parallel suspend operations across multiple VFs.
    • Added the ability to enable or disable ECN in the upstream by allowing the MODIFY_CONG_STATUS and QUERY_CONG_STATUS commands in mlx5_fwctl.
    • Firmware now allows the ADP-RETX timeout profile to be configured even when there are open QPs.
    • Added support for using the real-time clock to fill the request and response timestamps in hardware-generated RTT packets. To enable this feature, set REAL_TIME_CLOCK_ENABLE in mlxconfig and configure ROCE_CC_RTT_TIMESTAMP_FORMAT to 0x02 (REAL_TIME).
    • The SPDM (Security Protocol and Data Model) measurements reporting mechanism has been updated to comply with version 1.2.0 of the SPDM specification. For further information refer to https://docs.nvidia.com/networking/display/dpunicattestation/connectx-7+measurements
    • Added support for warm boot when UPT VMs are active, allowing the system to reboot without requiring a full shutdown of running VMs.
    ]]>         New features and changes included in version 28.47.1026:

    • Added Scaling Factor "read" field. To obtain correct values in mlxlink, MFT version 4.33.0 or later is required.
    • Added a recovery mechanism for I²C failures. In case of an I²C communication failure, the system now automatically attempts to recover and reinitialize the I/O expander to maintain continuous operation.
    • Added support for multiple lossless buffer configurations in PFC. The firmware now automatically calculates buffer sizes and maps priorities to their respective buffers.
    • Access control was added to ensure that only the VHCA instance that created a DPA partition is permitted to modify or delete it.
    • DPA TIMER functionality has been exposed through the MTCTR access register, allowing direct access by applications.
    • A new DPA Manifest mechanism was introduced to define and manage application permissions.
    • Enabled seamless metadata propagation across layers, allowing flow steering rules and packet processing logic to share contextual information such as flow identifiers, source context, or policy tags. It improves coordination between NIC and E-Switch pipelines, enabling more flexible traffic handling and advanced offload capabilities.
    • Added support for parallel suspend operations across multiple VFs.
    • Added the ability to enable or disable ECN in the upstream by allowing the MODIFY_CONG_STATUS and QUERY_CONG_STATUS commands in mlx5_fwctl.
    • Firmware now allows the ADP-RETX timeout profile to be configured even when there are open QPs.
    • Added support for using the real-time clock to fill the request and response timestamps in hardware-generated RTT packets. To enable this feature, set REAL_TIME_CLOCK_ENABLE in mlxconfig and configure ROCE_CC_RTT_TIMESTAMP_FORMAT to 0x02 (REAL_TIME).
    • The SPDM (Security Protocol and Data Model) measurements reporting mechanism has been updated to comply with version 1.2.0 of the SPDM specification. For further information refer to https://docs.nvidia.com/networking/display/dpunicattestation/connectx-7+measurements
    • Added support for warm boot when UPT VMs are active, allowing the system to reboot without requiring a full shutdown of running VMs.
    ]]>         The following issues have been fixed in version 28.47.1026:

    • The ZTR_RTTCC algorithm parameters AI and HAI did not support a sufficient range.
    • Coalescing regular SX events with SX RTT events under ZTR_RTTCC would keep improper event fields, which would impact congestion control behavior.
    • Issue in the ZTR_RTTCC algorithm where probe-abortion handling would behave improperly under high-stress network conditions, affecting proper congestion control and stable traffic performance.
    • An assertion failure that would occur with the E-Switch uplink in specific configurations where the e-switch was disabled and Path Migration was active or GVMIs were using SRQ loopback in SQs. The issue occurred because the firmware attempted to perform cleanup operations when the uplink configuration lacked sufficient capacity. Now, when the E-Switch is disabled and no actions are available in the uplink STE, the firmware connects to the uplink STE instead of copying it.
    • MCTP SMBus configuration issue which affected proper initialization and reliable communication between firmware components using the SMBus transport.
    • During failover or restart, the SM sending a PortInfo MAD to the HCA firmware triggered reinitialization of port buffers, momentarily halting ingress traffic and causing packet drops. The firmware now avoids reconfiguring port buffers when the new configuration matches the current one.
    • Under the ZTR_RTTCC algorithm, a flow that reached its minimum rate due to heavy congestion would not recover its rate once the congestion cleared.
    • Destroying or modifying a DPA partition from a non-owner VHCA was incorrectly allowed, such actions are now properly disallowed.
    • PTP was not supported when the port speed was configured to 1G.
    ]]>         The following issues have been fixed in version 28.47.1026:

    • The ZTR_RTTCC algorithm parameters AI and HAI did not support a sufficient range.
    • Coalescing regular SX events with SX RTT events under ZTR_RTTCC would keep improper event fields, which would impact congestion control behavior.
    • Issue in the ZTR_RTTCC algorithm where probe-abortion handling would behave improperly under high-stress network conditions, affecting proper congestion control and stable traffic performance.
    • An assertion failure that would occur with the E-Switch uplink in specific configurations where the e-switch was disabled and Path Migration was active or GVMIs were using SRQ loopback in SQs. The issue occurred because the firmware attempted to perform cleanup operations when the uplink configuration lacked sufficient capacity. Now, when the E-Switch is disabled and no actions are available in the uplink STE, the firmware connects to the uplink STE instead of copying it.
    • MCTP SMBus configuration issue which affected proper initialization and reliable communication between firmware components using the SMBus transport.
    • During failover or restart, the SM sending a PortInfo MAD to the HCA firmware triggered reinitialization of port buffers, momentarily halting ingress traffic and causing packet drops. The firmware now avoids reconfiguring port buffers when the new configuration matches the current one.
    • Under the ZTR_RTTCC algorithm, a flow that reached its minimum rate due to heavy congestion would not recover its rate once the congestion cleared.
    • Destroying or modifying a DPA partition from a non-owner VHCA was incorrectly allowed, such actions are now properly disallowed.
    • PTP was not supported when the port speed was configured to 1G.
    ]]>         New features and changes included in version 28.46.3048:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 28.46.3048:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following fixes have been included in version 28.46.3048:

    • The adapter card would drop NC-SI over MCTP commands when padding bytes were present after the NC-SI checksum.
    ]]>         The following fixes have been included in version 28.46.3048:

    • The adapter card would drop NC-SI over MCTP commands when padding bytes were present after the NC-SI checksum.
    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         This product enhanced the compatibility with firmware.

    ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         The following enhancement has been added in this version:

    • Added support of Ubuntu 22.04 LTS

    • Added support of Ubuntu 24.04 LTS.

    ]]>         The following enhancement has been added in this version:

    • Added support of Ubuntu 22.04 LTS

    • Added support of Ubuntu 24.04 LTS.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         This product now supports Azure Local 24H2.

    ]]>         This product now supports Azure Local 24H2.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None

    ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • This firmware contains a fix for a data integrity issue that could occur during a power cycle while the drive is processing write commands. 
    • ]]>
  • This firmware contains a fix for a data integrity issue that could occur during a power cycle while the drive is processing write commands. 
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         Initial Build

    ]]>         Initial Build

    ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated Supported Environments
  • Updated Supported Platforms
    • ]]>
  • Updated Supported Environments
  • Updated Supported Platforms
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product added SUSE Linux Enterprise Server 15 SP7 supported.

    ]]>         This product added SUSE Linux Enterprise Server 15 SP7 supported.

    ]]>         This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

    ]]>         This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

    ]]>         New features and changes included in version 28.47.1026:

    • Added Scaling Factor "read" field. To obtain correct values in mlxlink, MFT version 4.33.0 or later is required.
    • Added a recovery mechanism for I²C failures. In case of an I²C communication failure, the system now automatically attempts to recover and reinitialize the I/O expander to maintain continuous operation.
    • Added support for multiple lossless buffer configurations in PFC. The firmware now automatically calculates buffer sizes and maps priorities to their respective buffers.
    • Access control was added to ensure that only the VHCA instance that created a DPA partition is permitted to modify or delete it.
    • DPA TIMER functionality has been exposed through the MTCTR access register, allowing direct access by applications.
    • A new DPA Manifest mechanism was introduced to define and manage application permissions.
    • Enabled seamless metadata propagation across layers, allowing flow steering rules and packet processing logic to share contextual information such as flow identifiers, source context, or policy tags. It improves coordination between NIC and E-Switch pipelines, enabling more flexible traffic handling and advanced offload capabilities.
    • Added support for parallel suspend operations across multiple VFs.
    • Added the ability to enable or disable ECN in the upstream by allowing the MODIFY_CONG_STATUS and QUERY_CONG_STATUS commands in mlx5_fwctl.
    • Firmware now allows the ADP-RETX timeout profile to be configured even when there are open QPs.
    • Added support for using the real-time clock to fill the request and response timestamps in hardware-generated RTT packets. To enable this feature, set REAL_TIME_CLOCK_ENABLE in mlxconfig and configure ROCE_CC_RTT_TIMESTAMP_FORMAT to 0x02 (REAL_TIME).
    • The SPDM (Security Protocol and Data Model) measurements reporting mechanism has been updated to comply with version 1.2.0 of the SPDM specification. For further information refer to https://docs.nvidia.com/networking/display/dpunicattestation/connectx-7+measurements
    • Added support for warm boot when UPT VMs are active, allowing the system to reboot without requiring a full shutdown of running VMs.
    ]]>         New features and changes included in version 28.47.1026:

    • Added Scaling Factor "read" field. To obtain correct values in mlxlink, MFT version 4.33.0 or later is required.
    • Added a recovery mechanism for I²C failures. In case of an I²C communication failure, the system now automatically attempts to recover and reinitialize the I/O expander to maintain continuous operation.
    • Added support for multiple lossless buffer configurations in PFC. The firmware now automatically calculates buffer sizes and maps priorities to their respective buffers.
    • Access control was added to ensure that only the VHCA instance that created a DPA partition is permitted to modify or delete it.
    • DPA TIMER functionality has been exposed through the MTCTR access register, allowing direct access by applications.
    • A new DPA Manifest mechanism was introduced to define and manage application permissions.
    • Enabled seamless metadata propagation across layers, allowing flow steering rules and packet processing logic to share contextual information such as flow identifiers, source context, or policy tags. It improves coordination between NIC and E-Switch pipelines, enabling more flexible traffic handling and advanced offload capabilities.
    • Added support for parallel suspend operations across multiple VFs.
    • Added the ability to enable or disable ECN in the upstream by allowing the MODIFY_CONG_STATUS and QUERY_CONG_STATUS commands in mlx5_fwctl.
    • Firmware now allows the ADP-RETX timeout profile to be configured even when there are open QPs.
    • Added support for using the real-time clock to fill the request and response timestamps in hardware-generated RTT packets. To enable this feature, set REAL_TIME_CLOCK_ENABLE in mlxconfig and configure ROCE_CC_RTT_TIMESTAMP_FORMAT to 0x02 (REAL_TIME).
    • The SPDM (Security Protocol and Data Model) measurements reporting mechanism has been updated to comply with version 1.2.0 of the SPDM specification. For further information refer to https://docs.nvidia.com/networking/display/dpunicattestation/connectx-7+measurements
    • Added support for warm boot when UPT VMs are active, allowing the system to reboot without requiring a full shutdown of running VMs.
    ]]>         The following issues have been fixed in version 28.47.1026:

    • The ZTR_RTTCC algorithm parameters AI and HAI did not support a sufficient range.
    • Coalescing regular SX events with SX RTT events under ZTR_RTTCC would keep improper event fields, which would impact congestion control behavior.
    • Issue in the ZTR_RTTCC algorithm where probe-abortion handling would behave improperly under high-stress network conditions, affecting proper congestion control and stable traffic performance.
    • An assertion failure that would occur with the E-Switch uplink in specific configurations where the e-switch was disabled and Path Migration was active or GVMIs were using SRQ loopback in SQs. The issue occurred because the firmware attempted to perform cleanup operations when the uplink configuration lacked sufficient capacity. Now, when the E-Switch is disabled and no actions are available in the uplink STE, the firmware connects to the uplink STE instead of copying it.
    • MCTP SMBus configuration issue which affected proper initialization and reliable communication between firmware components using the SMBus transport.
    • During failover or restart, the SM sending a PortInfo MAD to the HCA firmware triggered reinitialization of port buffers, momentarily halting ingress traffic and causing packet drops. The firmware now avoids reconfiguring port buffers when the new configuration matches the current one.
    • Under the ZTR_RTTCC algorithm, a flow that reached its minimum rate due to heavy congestion would not recover its rate once the congestion cleared.
    • Destroying or modifying a DPA partition from a non-owner VHCA was incorrectly allowed, such actions are now properly disallowed.
    • PTP was not supported when the port speed was configured to 1G.
    ]]>         The following issues have been fixed in version 28.47.1026:

    • The ZTR_RTTCC algorithm parameters AI and HAI did not support a sufficient range.
    • Coalescing regular SX events with SX RTT events under ZTR_RTTCC would keep improper event fields, which would impact congestion control behavior.
    • Issue in the ZTR_RTTCC algorithm where probe-abortion handling would behave improperly under high-stress network conditions, affecting proper congestion control and stable traffic performance.
    • An assertion failure that would occur with the E-Switch uplink in specific configurations where the e-switch was disabled and Path Migration was active or GVMIs were using SRQ loopback in SQs. The issue occurred because the firmware attempted to perform cleanup operations when the uplink configuration lacked sufficient capacity. Now, when the E-Switch is disabled and no actions are available in the uplink STE, the firmware connects to the uplink STE instead of copying it.
    • MCTP SMBus configuration issue which affected proper initialization and reliable communication between firmware components using the SMBus transport.
    • During failover or restart, the SM sending a PortInfo MAD to the HCA firmware triggered reinitialization of port buffers, momentarily halting ingress traffic and causing packet drops. The firmware now avoids reconfiguring port buffers when the new configuration matches the current one.
    • Under the ZTR_RTTCC algorithm, a flow that reached its minimum rate due to heavy congestion would not recover its rate once the congestion cleared.
    • Destroying or modifying a DPA partition from a non-owner VHCA was incorrectly allowed, such actions are now properly disallowed.
    • PTP was not supported when the port speed was configured to 1G.
    ]]>         New features and changes included in version 28.46.3048:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 28.46.3048:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following fixes have been included in version 28.46.3048:

    • The adapter card would drop NC-SI over MCTP commands when padding bytes were present after the NC-SI checksum.
    ]]>         The following fixes have been included in version 28.46.3048:

    • The adapter card would drop NC-SI over MCTP commands when padding bytes were present after the NC-SI checksum.
    ]]>         Added SLES16 Support Environment

    ]]>         Added SLES16 Support Environment

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    Ver. 0.2.3.0(B) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 0.2.3.0(B) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>
  • This product now supports SUSE Linux Enterprise Server 15 SP7
    • ]]>
  • This product now supports SUSE Linux Enterprise Server 15 SP7
    • ]]>
  • This product now supports SUSE Linux Enterprise Server 15 SP7.
  • This product adds support for 25G AOC transceiver in link capability to support ethtool report.
    • ]]>
  • This product now supports SUSE Linux Enterprise Server 15 SP7.
  • This product adds support for 25G AOC transceiver in link capability to support ethtool report.
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions..
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions..
    • ]]>
  • This is a maintenance release that contains code fix improvements and drive function enhancements. Upgrading from HPK1 to HPK2 requires power cycle.
    • ]]>
  • This is a maintenance release that contains code fix improvements and drive function enhancements. Upgrading from HPK1 to HPK2 requires power cycle.
    • ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.8002:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.8002:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4506:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    No new Features and changes included in version 12.28.2302.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4506:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    No new Features and changes included in version 12.28.2302.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         No new fixes have been added in version 12.28.2302.

     

    The following issues have been fixed in version 16.35.4506:

     

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         No new fixes have been added in version 12.28.2302.

     

    The following issues have been fixed in version 16.35.4506:

     

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • This fix is for unrecovered errors may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>
  • This fix is for unrecovered errors may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Updated to driver version 25.4.50020.0

    ]]>         Updated to driver version 25.4.50020.0

    ]]>         Updated Installer Digital signature validity

    ]]>         Updated Installer Digital signature validity

    ]]>         Updated to driver version 25.4.50020.0

    ]]>         Updated to driver version 25.4.50020.0

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>
  • This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.
  • This product enhanced media type detection function on PHY on 100G adapter.
    • ]]>
  • This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.
  • This product enhanced media type detection function on PHY on 100G adapter.
    • ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         Initial Build

    ]]>         There are no enhancements in the current HPE iLO 5 v3.17 release.

    ]]>         There are no enhancements in the current HPE iLO 5 v3.17 release.

    ]]>         Fixed an issue where an improper shutdown was detected in the OS after HPE iLO firmware upgrade through COM.

    ]]>         Fixed an issue where an improper shutdown was detected in the OS after HPE iLO firmware upgrade through COM.

    ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Initial version

    ]]>         Initial version

    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us.
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us.
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us which will be active on 18-Aug-2025.
    • ]]>
  • This is a firmware maintenance release. It addresses a potential data loss issue, along with other bug fixes and improvements.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00150711en_us which will be active on 18-Aug-2025.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • SR 2.10.2/SR 3.5.2 RC drop.
    • ]]>
  • SR 2.10.2/SR 3.5.2 RC drop.
    • ]]>
  • Added a timeout value to RAID path requests to physical devices.
    • ]]>
  • Added a timeout value to RAID path requests to physical devices.
    • ]]>
  • Fixed an issue where the kernel call trace when calling smp_processor_id() in real-time kernel. 
  • Fixed an issue of accessing NULL SCSI device pointer caused by a rare race condition. 
  • Fixed a system crash issue caused by a divide-by-zero condition. 
  • Fixed an issue where after a device has been removed, it's possible for a previously scheduled work item for a LUN reset to be executed. 
    • ]]>
  • Fixed an issue where the kernel call trace when calling smp_processor_id() in real-time kernel. 
  • Fixed an issue of accessing NULL SCSI device pointer caused by a rare race condition. 
  • Fixed a system crash issue caused by a divide-by-zero condition. 
  • Fixed an issue where after a device has been removed, it's possible for a previously scheduled work item for a LUN reset to be executed. 
    • ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery.
    • ]]>
  • This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Instead of using sed command, using awk command to fetch the right column name

    ]]>         Instead of using sed command, using awk command to fetch the right column name

    ]]>         Instead of using sed command, using awk command to fetch the right column name

    ]]>         Instead of using sed command, using awk command to fetch the right column name

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • This firmware contains a fix for a data integrity issue that could occur during a power cycle while the drive is processing write commands.
    • ]]>
  • This firmware contains a fix for a data integrity issue that could occur during a power cycle while the drive is processing write commands.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product VMware ESXi 9 supported.

    ]]>         This product VMware ESXi 9 supported.

    ]]>
  • Fixes a false indication of rare capacitor test failure
    • ]]>
  • Fixes a false indication of rare capacitor test failure
    • ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>         TBD

    ]]>         TBD

    ]]>         This product fixes issue where link disconnected with the latest Out-of-Box (OOB) Driver.

    ]]>         This product fixes issue where link disconnected with the latest Out-of-Box (OOB) Driver.

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>
  • Improves performance in certain file systems and implements fixes for several of the previous firmware’s shortcomings.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Improves performance in certain file systems and implements fixes for several of the previous firmware’s shortcomings.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>
  • This product enhanced traffic flow in queue map rebalance.
  • This product enhanced  media type detection over PHY logic.
    • ]]>
  • This product enhanced traffic flow in queue map rebalance.
  • This product enhanced  media type detection over PHY logic.
    • ]]>         This product fixed the system event logging.

    ]]>         This product fixed the system event logging.

    ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • RC drop 6.60.8.0
    • ]]>
  • RC drop 6.60.8.0
    • ]]>
  • Fix windows tool cert expire issue.
     
    • ]]>
  • Fix windows tool cert expire issue.
     
    • ]]>         Added ESXi 9.1 Supported Environment

    ]]>         Added ESXi 9.1 Supported Environment

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixes the issue where the Firmeare update failed on BCM57416 4 MB flash cards .
     
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixes the issue where the Firmeare update failed on BCM57416 4 MB flash cards .
     
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixes the issue where the Firmeare update failed on BCM57416 4 MB flash cards .
     
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixes the issue where the Firmeare update failed on BCM57416 4 MB flash cards .
     
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.8002:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.8002:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.4506:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.4506:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         No new issues have been fixed in version 12.28.2302.

     

    The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         No new issues have been fixed in version 12.28.2302.

     

    The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>
  • Improves data integrity. 
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide a minor performance improvement.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Improves data integrity. 
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide a minor performance improvement.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support of RHEL 9.1

    • Added support of SLES15 SP4

    ]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support of RHEL 9.1

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • This FW release modifies drive's behavior from "returning error" to "silently discard" if a request is received by drive from the host during FLR.
    • ]]>
  • This FW release modifies drive's behavior from "returning error" to "silently discard" if a request is received by drive from the host during FLR.
    • ]]>
  • This FW update contains the fix for false ILO message of temporary drive "degraded" status.
    • ]]>
  • This FW update contains the fix for false ILO message of temporary drive "degraded" status.
    • ]]>         The following new features and changes have been included in version 25.07-0.9.7.1:
     

    • Hardware Steering (HWS): Enabled HWS as a secondary option for the device steering mode. If Software Steering (SWS) is not supported, HWS will be used by default, assuming it is available. Firmware Steering (FW) will now serve as the default only when both SWS and HWS are unsupported.

    • Hardware-Managed Flow Steering (HMFS): HMFS is a new approach to managing steering rules, where STEs are written to the ICM by hardware instead of software (as in software-managed steering). This enables a higher rate of rule insertion.

    • Queue Affinity Bonding: Added support for 4-port bonding to allow users to add both p0 and p1 to a bond without requiring SSH access to the host or bringing down the driver beforehand.

    • Multiple Doorbells per PF: Increased the number of doorbells from 1 to 8, distributing them in a round-robin manner across channel send and receive queues. This enhancement improves scalability on multi-core systems with high packet rates by reducing MMIO contention on doorbell addresses. In high packet-rate scenarios, Sub-NUMA Clustering is also required to maintain consistent channel packet rates.

    • HQoS for Virtualization Solution: Added support for hierarchical group structures to enable multi-tier resource control, where parent groups enforce overall limits and child groups dynamically share available bandwidth. This design is essential for effective QoS enforcement, burst handling, and fair bandwidth allocation, ensuring workloads receive appropriate resources.

    • Number of lanes Configuration when Auto-Negotiation is Disabled: Added support for specifying the number of lanes (protocol width) when auto-negotiation is disabled. Since each combination of speed and lane count corresponds to a unique link mode, this allows the user to select a specific link mode when auto-negotiation is off. This change aligns with a recent firmware update that requires the driver to provide a single link mode, rather than a bitmap based on the user-defined speed.

    • Extend ODP Statistics with Operation Count: Added the following new page-granularity counters:
      • num_page_faults: counts the number of page fault events handled
      • num_invalidations: counts the number of page invalidation events handled
    ]]>         The following new features and changes have been included in version 25.07-0.9.7.1:
     

    • Hardware Steering (HWS): Enabled HWS as a secondary option for the device steering mode. If Software Steering (SWS) is not supported, HWS will be used by default, assuming it is available. Firmware Steering (FW) will now serve as the default only when both SWS and HWS are unsupported.

    • Hardware-Managed Flow Steering (HMFS): HMFS is a new approach to managing steering rules, where STEs are written to the ICM by hardware instead of software (as in software-managed steering). This enables a higher rate of rule insertion.

    • Queue Affinity Bonding: Added support for 4-port bonding to allow users to add both p0 and p1 to a bond without requiring SSH access to the host or bringing down the driver beforehand.

    • Multiple Doorbells per PF: Increased the number of doorbells from 1 to 8, distributing them in a round-robin manner across channel send and receive queues. This enhancement improves scalability on multi-core systems with high packet rates by reducing MMIO contention on doorbell addresses. In high packet-rate scenarios, Sub-NUMA Clustering is also required to maintain consistent channel packet rates.

    • HQoS for Virtualization Solution: Added support for hierarchical group structures to enable multi-tier resource control, where parent groups enforce overall limits and child groups dynamically share available bandwidth. This design is essential for effective QoS enforcement, burst handling, and fair bandwidth allocation, ensuring workloads receive appropriate resources.

    • Number of lanes Configuration when Auto-Negotiation is Disabled: Added support for specifying the number of lanes (protocol width) when auto-negotiation is disabled. Since each combination of speed and lane count corresponds to a unique link mode, this allows the user to select a specific link mode when auto-negotiation is off. This change aligns with a recent firmware update that requires the driver to provide a single link mode, rather than a bitmap based on the user-defined speed.

    • Extend ODP Statistics with Operation Count: Added the following new page-granularity counters:
      • num_page_faults: counts the number of page fault events handled
      • num_invalidations: counts the number of page invalidation events handled
    ]]>         The following issues have been fixed in version  25.07-0.9.7.1:

    • OFED installation caused CIFS to break in RHEL 8.4 and above. A dummy module was added so that CIFS will be disabled after OFED installation in RHEL 8.4 and above.
    • Performance degradation on older kernel versions using RX cache, particularly on slower ARM CPUs with larger RX buffers. The issue was caused by the driver attempting to allocate new RX pages too quickly, leading to head-of-line blocking in the RX cache. The fix improves RX cache usage by triggering page allocation for a bulk of at least 2 WQEs, allowing the application more time to process packets and return buffers to the RX cache, thereby reducing blocking and enhancing performance.
    • VF behavior was not aligned with /sys/class/net/<interface-name>/device/sriov_numvfs (silently ignore attempts to set the same number of VFs, and prevent changing the number of VFs until existing VFs are removed).
    • On BlueField-3 devices running linux-bluefield kernel versions 5.15.0-1050 or 5.15.0-1060, a kernel crash occurred due to a NULL pointer dereference in the cls_api network scheduler.
    ]]>         The following issues have been fixed in version  25.07-0.9.7.1:

    • OFED installation caused CIFS to break in RHEL 8.4 and above. A dummy module was added so that CIFS will be disabled after OFED installation in RHEL 8.4 and above.
    • Performance degradation on older kernel versions using RX cache, particularly on slower ARM CPUs with larger RX buffers. The issue was caused by the driver attempting to allocate new RX pages too quickly, leading to head-of-line blocking in the RX cache. The fix improves RX cache usage by triggering page allocation for a bulk of at least 2 WQEs, allowing the application more time to process packets and return buffers to the RX cache, thereby reducing blocking and enhancing performance.
    • VF behavior was not aligned with /sys/class/net/<interface-name>/device/sriov_numvfs (silently ignore attempts to set the same number of VFs, and prevent changing the number of VFs until existing VFs are removed).
    • On BlueField-3 devices running linux-bluefield kernel versions 5.15.0-1050 or 5.15.0-1060, a kernel crash occurred due to a NULL pointer dereference in the cls_api network scheduler.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Initial release

    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
    • ]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.43.1014:

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.43.1014:

    ]]>         The following issues have been fixed in version 26.43.1014:

    ]]>         The following issues have been fixed in version 26.43.1014:

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.41.1001:

    • Implemented Deterministic Random Bit Generator (DRBG) algorithm on top of firmware TRNG (the source for raw data input) in accordance with NIST SP800-90A.
    • Added support for vDPA virtual queue state change from suspend to ready, and discrete mkey for descriptor. vDPA Live Migration uses these two new capabilities to reduce downtime since vq can go back to ready state for traffic and descriptor-only-mkey can help reduce mkey mapping time.
    • Added a new NVConfig option to copy AR bit from the BTH header to the DHCP header.
    • Added the option to provide field's offset and length in Steering add_action option.
    • Added support for steering match on packet l4_type through FTG/FTE.
    • Extended Flex Parser merge mechanism to support hardware capabilities.
    • Enabled the option to disable the native parser when the parse graph node is configured with the same conditions.
    • Added support for father/son headers parsing.
    • Added support for tunnel_offload in LRO.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.41.1001:

    • Implemented Deterministic Random Bit Generator (DRBG) algorithm on top of firmware TRNG (the source for raw data input) in accordance with NIST SP800-90A.
    • Added support for vDPA virtual queue state change from suspend to ready, and discrete mkey for descriptor. vDPA Live Migration uses these two new capabilities to reduce downtime since vq can go back to ready state for traffic and descriptor-only-mkey can help reduce mkey mapping time.
    • Added a new NVConfig option to copy AR bit from the BTH header to the DHCP header.
    • Added the option to provide field's offset and length in Steering add_action option.
    • Added support for steering match on packet l4_type through FTG/FTE.
    • Extended Flex Parser merge mechanism to support hardware capabilities.
    • Enabled the option to disable the native parser when the parse graph node is configured with the same conditions.
    • Added support for father/son headers parsing.
    • Added support for tunnel_offload in LRO.
    ]]>         The following issues have been fixed in version 26.41.1001:

    • Traffic failure occurred when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic.
    • The second mkey index returned even if it was not set in the creation of the virtio q when querying virtio q object.
    • Traffic loss occurred after performing Live Migration with virtio vq "frozen-ready" feature.

    Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.

    ]]>         The following issues have been fixed in version 26.41.1001:

    • Traffic failure occurred when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic.
    • The second mkey index returned even if it was not set in the creation of the virtio q when querying virtio q object.
    • Traffic loss occurred after performing Live Migration with virtio vq "frozen-ready" feature.

    Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.

    ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
     
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
     
    • ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>         Added Support for RHEL 10.

    ]]>         Added Support for RHEL 10.

    ]]>         Added support of ESXi 9.0

    Removed support of ESXi 7.0

    ]]>         Added support of ESXi 9.0

    Removed support of ESXi 7.0

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Reliability enhancements and VENDOR IDENTIFICATION field change from “HP” to HPE”.
    • ]]>
  • Reliability enhancements and VENDOR IDENTIFICATION field change from “HP” to HPE”.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None

    ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fixing Maximum Temperature Reporting in system log
    • ]]>
  • Fixing Maximum Temperature Reporting in system log
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated Software Category
    • ]]>
  • Updated Software Category
    • ]]>
  • Updated installer.dll
    • ]]>
  • Updated installer.dll
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Added support for EL8000s

    ]]>         Added support for EL8000s

    ]]>         Allowed to update chassis controller firmware when iLO security mode is set to CNSA

    ]]>         Allowed to update chassis controller firmware when iLO security mode is set to CNSA

    ]]>
  • Allowed to update chassis controller firmware when iLO security mode is set to CNSA
  • Signed with SHA384
    • ]]>
  • Allowed to update chassis controller firmware when iLO security mode is set to CNSA
  • Signed with SHA384
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>         Updated to version 14.4.731.6

    ]]>         Updated to version 14.4.731.6

    ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fixes a false indication of rare capacitor test failure
    • ]]>
  • Fixes a false indication of rare capacitor test failure
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated supported environments
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • This firmware version fixes a bug with the unmap command that may cause a drive hang
    • ]]>
  • This firmware version fixes a bug with the unmap command that may cause a drive hang
    • ]]>         Updated to version 9.4.11.20

    ]]>         Updated to version 9.4.11.20

    ]]>         Updated Driver and Installer Digital Signature validity

    ]]>         Updated Driver and Installer Digital Signature validity

    ]]>         Updated to version 9.4.11.20

    ]]>         Updated to version 9.4.11.20

    ]]>         This product enhances to update PNP ID table（Plug and Play Identifier）

    ]]>         This product enhances to update PNP ID table（Plug and Play Identifier）

    ]]>         This product enhances to update PNP ID table. (Plug and Play Identifier)

    ]]>         This product enhances to update PNP ID table. (Plug and Play Identifier)

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixing Maximum Temperature Reporting in system log.
    • ]]>
  • Fixing Maximum Temperature Reporting in system log.
    • ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    ]]>         Fixed the following :

    SFP Parameters value decimal part is truncated

    ]]>         Fixed the following :

    SFP Parameters value decimal part is truncated

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.09

    09.15.15

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.09 09.15.15 7.39 0.0
    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>
  • This product added ethtool flags to disable MAC/VF source pruning in legacy mode.
  • This product added SUSE Linux Enterprise Server 15 SP7 supported.
    • ]]>
  • This product added ethtool flags to disable MAC/VF source pruning in legacy mode.
  • This product added SUSE Linux Enterprise Server 15 SP7 supported.
    • ]]>
  • This product fixed observed call trace during unloading driver when ts2phc is running.
  • This product fixed observed call trace with wrong unregistering devlink instance during removing driver.
    • ]]>
  • This product fixed observed call trace during unloading driver when ts2phc is running.
  • This product fixed observed call trace with wrong unregistering devlink instance during removing driver.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         Firmware for the following devices has been updated to 20.43.2566:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No changes or new features have been included in version 20.43.2566.

    ]]>         Firmware for the following devices has been updated to 20.43.2566:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         RC drop 6.60.8.0.

    ]]>         RC drop 6.60.8.0.

    ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
  • Fixed an issue where the last failure reason was not listing on physical drives. 
  • Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode. 
  • Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume. 
  • Fixed an issue where a duplicate entry for the physical drive was displayed. 
    • ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
  • Fixed an issue where the last failure reason was not listing on physical drives. 
  • Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode. 
  • Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume. 
  • Fixed an issue where a duplicate entry for the physical drive was displayed. 
    • ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
  • "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:

    •            – Drive Resource — Rebuild/Sanitize/Encrypt

               – Volume Resource — Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.

               The legacy OperationName property remains available and is now marked as deprecated."

    • Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
    • Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.
    ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>
  • Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
  • Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
  • Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
  • Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
  • Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
  • Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
  • Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
  • Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
  • Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
  • Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
  • Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
  • Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.
    • ]]>         Driver version 91.5.5.86.0
    This driver is only supported on VMware ESXi 9.1

     

    ]]>         Driver version 91.5.5.86.0
    This driver is only supported on VMware ESXi 9.1

     

    ]]>         Updated to driver version 14.4.624.1

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

     

    Added following Enhancement:

    Reverted IRQ count to 128 from 240 in inf file to avoid resource constraints on low end server configurations

    ]]>         Updated to driver version 14.4.624.1

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

     

    Added following Enhancement:

    Reverted IRQ count to 128 from 240 in inf file to avoid resource constraints on low end server configurations

    ]]>         Updated to driver version 14.4.624.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Updated to driver version 14.4.624.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Initial release

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>
  • Added Azure Local 24H2 OS support.
    • ]]>
  • Added Azure Local 24H2 OS support.
    • ]]>         Support Azure Stack HCI 23H2.

    ]]>         Support Azure Stack HCI 23H2.

    ]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         TBD

    ]]>         TBD

    ]]>         This product fixed the failed while setting LFC for PF.

    ]]>         This product fixed the failed while setting LFC for PF.

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         TBD

    ]]>         TBD

    ]]>         This product VMware ESXi 9 supported.

    ]]>         This product VMware ESXi 9 supported.

    ]]>         New features and changes included in version 26.46.3048:

    • Added support for RSS with crypto offload enabling the NIC to parallelize packet processing across CPU cores while performing encryption/decryption in hardware. Additionally, introduced a new l4_type_ext parameter with values: 0 (None), 1 (TCP), 2 (UDP), 3 (ICMP).
    • Added an extra validation for the payload_len field in incoming NC-SI messages. Previously, invalid packets might have been accepted; now, such packets are silently dropped.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 26.46.3048:

    • Added support for RSS with crypto offload enabling the NIC to parallelize packet processing across CPU cores while performing encryption/decryption in hardware. Additionally, introduced a new l4_type_ext parameter with values: 0 (None), 1 (TCP), 2 (UDP), 3 (ICMP).
    • Added an extra validation for the payload_len field in incoming NC-SI messages. Previously, invalid packets might have been accepted; now, such packets are silently dropped.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 26.46.3048:

    • Configuring a small MTU led to fragmentation of packets critical for the PXE boot process. As a result, the PXE boot filters mistakenly discarded these packets, causing the PXE boot to fail.
    ]]>         The following issues have been fixed in version 26.46.3048:

    • Configuring a small MTU led to fragmentation of packets critical for the PXE boot process. As a result, the PXE boot filters mistakenly discarded these packets, causing the PXE boot to fail.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    No new features and changes have been included in version 26.45.1020.

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    No new features and changes have been included in version 26.45.1020.

    ]]>         The following issues have been fixed in version 26.45.1020:

    • Configuring PHY_RATE_MASK for 10G in NV settings incorrectly disabled 10G capabilities.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         The following issues have been fixed in version 26.45.1020:

    • Configuring PHY_RATE_MASK for 10G in NV settings incorrectly disabled 10G capabilities.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         TBD

    ]]>         TBD

    ]]>         This product fixed to prevent BSOD issue.

    ]]>         This product fixed to prevent BSOD issue.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>
  • This product enhanced traffic flow in queue map rebalance.
  • This product enhanced  media type detection over PHY logic.
    • ]]>
  • This product enhanced traffic flow in queue map rebalance.
  • This product enhanced  media type detection over PHY logic.
    • ]]>         This product fixed the system event logging.

    ]]>         This product fixed the system event logging.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         Firmware for the following devices has been updated to 20.43.2566:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No changes or new features have been included in version 20.43.2566.

    ]]>         Firmware for the following devices has been updated to 20.43.2566:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         Added SLES16 support

    ]]>         Added SLES16 support

    ]]>
  • Added RHEL10 support
    • ]]>
  • Added RHEL10 support
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • This FW update contains the fix for false ILO message of temporary drive "degraded" status.
  • After the FW update, if the latest drive FW version is not correctly reflected in iLO under the scenarios outlined below, a system reboot or iLO reset may be required.
    • HPK2 -> HPK4 (or later version)
    • HPK3 -> HPK4 (or later version)
    • ]]>
  • This FW update contains the fix for false ILO message of temporary drive "degraded" status.
  • After the FW update, if the latest drive FW version is not correctly reflected in iLO under the scenarios outlined below, a system reboot or iLO reset may be required.
    • HPK2 -> HPK4 (or later version)
    • HPK3 -> HPK4 (or later version)
    • ]]>
  • This FW update contains the fix for false ILO message of temporary drive "degraded" status.
    • ]]>
  • This FW update contains the fix for false ILO message of temporary drive "degraded" status.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>
  • This is a maintenance release that contains code fix improvements and drive function enhancements.
    • ]]>
  • This is a maintenance release that contains code fix improvements and drive function enhancements.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Updated the default Secure Boot dbx to mitigate CVE-2025-3052.

    ]]>         Updated the default Secure Boot dbx to mitigate CVE-2025-3052.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.R for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where changing BIOS settings via Redfish would fail if a BIOS update was performed during the same boot.

    Remove Expired SUSE and VMware Certificates.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.R for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where changing BIOS settings via Redfish would fail if a BIOS update was performed during the same boot.

    Remove Expired SUSE and VMware Certificates.

    Known Issues:

    None]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         Updated the kit to version 6.0.0.1-4

    ]]>         Updated the kit to version 6.0.0.1-4

    ]]>         Updated the kit to version 6.0.0.1-4

    ]]>         Updated the kit to version 6.0.0.1-4

    ]]>         Driver version 5.5.86.0
    This driver is only supported on VMware ESXi 9.0

     

    ]]>         Driver version 5.5.86.0
    This driver is only supported on VMware ESXi 9.0

     

    ]]>         Driver version 5.5.85.0
    This driver is only supported on VMware ESXi 9.0

     

    ]]>         Driver version 5.5.85.0
    This driver is only supported on VMware ESXi 9.0

     

    ]]>
  • Corrective actions to fix potential background media scan issue.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>
  • Corrective actions to fix potential background media scan issue.
  • Support firmware flash in OS FIPS enabled mode.
    • ]]>         Initial Build

    ]]>         Initial Build

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • 7.36 Aero PR11 GCA
    • ]]>
  • 7.36 Aero PR11 GCA
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0.
    • ]]>
  • Added support for ESXi 9.0.
    • ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
     
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
     
    • ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
     
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
     
    • ]]>
  • Improve FW handling on capacitor charge timeout mechanism
  • Change the sense code during download microcode (0E)
    • ]]>
  • Improve FW handling on capacitor charge timeout mechanism
  • Change the sense code during download microcode (0E)
    • ]]>         This is initial release

    ]]>         This is initial release

    ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Updated Supported Environments
    • ]]>         The following new features and changes have been included in version 25.07-0.9.7.1:
     

    • Hardware Steering (HWS): Enabled HWS as a secondary option for the device steering mode. If Software Steering (SWS) is not supported, HWS will be used by default, assuming it is available. Firmware Steering (FW) will now serve as the default only when both SWS and HWS are unsupported.

    • Hardware-Managed Flow Steering (HMFS): HMFS is a new approach to managing steering rules, where STEs are written to the ICM by hardware instead of software (as in software-managed steering). This enables a higher rate of rule insertion.

    • Queue Affinity Bonding: Added support for 4-port bonding to allow users to add both p0 and p1 to a bond without requiring SSH access to the host or bringing down the driver beforehand.

    • Multiple Doorbells per PF: Increased the number of doorbells from 1 to 8, distributing them in a round-robin manner across channel send and receive queues. This enhancement improves scalability on multi-core systems with high packet rates by reducing MMIO contention on doorbell addresses. In high packet-rate scenarios, Sub-NUMA Clustering is also required to maintain consistent channel packet rates.

    • HQoS for Virtualization Solution: Added support for hierarchical group structures to enable multi-tier resource control, where parent groups enforce overall limits and child groups dynamically share available bandwidth. This design is essential for effective QoS enforcement, burst handling, and fair bandwidth allocation, ensuring workloads receive appropriate resources.

    • Number of lanes Configuration when Auto-Negotiation is Disabled: Added support for specifying the number of lanes (protocol width) when auto-negotiation is disabled. Since each combination of speed and lane count corresponds to a unique link mode, this allows the user to select a specific link mode when auto-negotiation is off. This change aligns with a recent firmware update that requires the driver to provide a single link mode, rather than a bitmap based on the user-defined speed.

    • Extend ODP Statistics with Operation Count: Added the following new page-granularity counters:
      • num_page_faults: counts the number of page fault events handled
      • num_invalidations: counts the number of page invalidation events handled
    ]]>         The following new features and changes have been included in version 25.07-0.9.7.1:
     

    • Hardware Steering (HWS): Enabled HWS as a secondary option for the device steering mode. If Software Steering (SWS) is not supported, HWS will be used by default, assuming it is available. Firmware Steering (FW) will now serve as the default only when both SWS and HWS are unsupported.

    • Hardware-Managed Flow Steering (HMFS): HMFS is a new approach to managing steering rules, where STEs are written to the ICM by hardware instead of software (as in software-managed steering). This enables a higher rate of rule insertion.

    • Queue Affinity Bonding: Added support for 4-port bonding to allow users to add both p0 and p1 to a bond without requiring SSH access to the host or bringing down the driver beforehand.

    • Multiple Doorbells per PF: Increased the number of doorbells from 1 to 8, distributing them in a round-robin manner across channel send and receive queues. This enhancement improves scalability on multi-core systems with high packet rates by reducing MMIO contention on doorbell addresses. In high packet-rate scenarios, Sub-NUMA Clustering is also required to maintain consistent channel packet rates.

    • HQoS for Virtualization Solution: Added support for hierarchical group structures to enable multi-tier resource control, where parent groups enforce overall limits and child groups dynamically share available bandwidth. This design is essential for effective QoS enforcement, burst handling, and fair bandwidth allocation, ensuring workloads receive appropriate resources.

    • Number of lanes Configuration when Auto-Negotiation is Disabled: Added support for specifying the number of lanes (protocol width) when auto-negotiation is disabled. Since each combination of speed and lane count corresponds to a unique link mode, this allows the user to select a specific link mode when auto-negotiation is off. This change aligns with a recent firmware update that requires the driver to provide a single link mode, rather than a bitmap based on the user-defined speed.

    • Extend ODP Statistics with Operation Count: Added the following new page-granularity counters:
      • num_page_faults: counts the number of page fault events handled
      • num_invalidations: counts the number of page invalidation events handled
    ]]>         The following issues have been fixed in version  25.07-0.9.7.1:

    • OFED installation caused CIFS to break in RHEL 8.4 and above. A dummy module was added so that CIFS will be disabled after OFED installation in RHEL 8.4 and above.
    • Performance degradation on older kernel versions using RX cache, particularly on slower ARM CPUs with larger RX buffers. The issue was caused by the driver attempting to allocate new RX pages too quickly, leading to head-of-line blocking in the RX cache. The fix improves RX cache usage by triggering page allocation for a bulk of at least 2 WQEs, allowing the application more time to process packets and return buffers to the RX cache, thereby reducing blocking and enhancing performance.
    • VF behavior was not aligned with /sys/class/net/<interface-name>/device/sriov_numvfs (silently ignore attempts to set the same number of VFs, and prevent changing the number of VFs until existing VFs are removed).
    • On BlueField-3 devices running linux-bluefield kernel versions 5.15.0-1050 or 5.15.0-1060, a kernel crash occurred due to a NULL pointer dereference in the cls_api network scheduler.
    ]]>         The following issues have been fixed in version  25.07-0.9.7.1:

    • OFED installation caused CIFS to break in RHEL 8.4 and above. A dummy module was added so that CIFS will be disabled after OFED installation in RHEL 8.4 and above.
    • Performance degradation on older kernel versions using RX cache, particularly on slower ARM CPUs with larger RX buffers. The issue was caused by the driver attempting to allocate new RX pages too quickly, leading to head-of-line blocking in the RX cache. The fix improves RX cache usage by triggering page allocation for a bulk of at least 2 WQEs, allowing the application more time to process packets and return buffers to the RX cache, thereby reducing blocking and enhancing performance.
    • VF behavior was not aligned with /sys/class/net/<interface-name>/device/sriov_numvfs (silently ignore attempts to set the same number of VFs, and prevent changing the number of VFs until existing VFs are removed).
    • On BlueField-3 devices running linux-bluefield kernel versions 5.15.0-1050 or 5.15.0-1060, a kernel crash occurred due to a NULL pointer dereference in the cls_api network scheduler.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following new features and changes have been included in version 25.04-0.6.1.1:

    • Trust Lockdown Health Syndrome: Added a new health syndrome for trust lockdown and expose the CRR bit in the health buffer. When the CRR bit is set, it indicates that the syndrome requires a cold reset for recovery.
    • A Single PTP Device per Hardware Clock: PHC is typically shared across multiple functions. Currently, the driver creates a separate PTP device for each network interface sharing the same PHC, resulting in redundancy and added complexity. To address this, a single PTP device is now created to represent the shared PHC when operating in real-time mode.
    • Log IB State Transitions: Enhanced visibility into IB device state transitions by adding log messages to the kernel log (dmesg). Each time an IB device changes state, a corresponding message will be logged. For example: "mlx5_0: Port: 1 Link DOWN".
    • Optional-counters Binding Support and New Packets/bytes Counters: Previously, optional counters were available only on a per-link basis. This release introduces the ability to bind optional counters to a specific counter object, enabling users to track optional counters across a specific QP group. Support is provided for both automatic and manual binding modes. In both cases, the optional counters that are bound to the QP are those currently configured on the link at the time of binding. Additionally, four new optional counters that track RDMA ingress and egress traffic are introduced: rdma_tx_bytes; rdma_tx_packets; rdma_rx_bytes; rdma_rx_packets. This functionality is exposed to users via the iproute2 package, which must be updated to support this feature.
    • User CAPability (UCAP) API: The User CAPability (UCAP) API introduces a mechanism for creating user contexts with specific firmware privileges. It offers fine-grained control over firmware features by exposing each capability as a character device with root-level read-write access. Root processes can grant users these privileges by allowing access to the corresponding character devices. When a user context is created using a UCAP file descriptor, it inherits the associated privileges. For mlx5, two UCAP character devices are provided, and any user context opened with at least one of them is treated as privileged. To guarantee the execution of privileged commands, non-privileged commands are restricted when a privileged user is active on the device.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>         The following issues have been fixed in version  25.04-0.6.1.1:

    • Buffer initialization became a performance bottleneck during the allocation of large buffers, typically when using a high number of QPs with large message sizes. The root cause was the inefficient use of rand(). This has been resolved by replacing it with a faster pseudo-random algorithm.
    • A potential deadlock that could occur during the handling of peer memory registration failures.
    • The following error occurred when switching to SwitchDev mode: "mlx5_core 0000:03:00.0: mlx5_cmd_out_err:835:(pid 24362): CREATE_FLOW_GROUP(0x933) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x4065f0), err(-22); mlx5_core 0000:03:00.0: E-Switch: Failed to create peer miss flow group err(-22)"
    • A sysfs issue that occurred when accessing hardware counters from within a namespace.
    • "ibstat" would fail and crash when encountering a non-RoCE/IB device, preventing it from displaying information for the remaining valid RoCE/IB devices.
    • Bandwidth degradation in cases of high number of QPs, where polling only 16 CQEs per iteration may not be sufficient to process all completions in time.
    • A race condition between firmware syndrome report and driver initialization during boot.
    • The driver failed to load when a firmware syndrome was detected during boot.
    • The mlnx_tune -l command did not list several operating systems that were in fact supported.
    • The kernel did not define TCA_TUNNEL_KEY_ENC_SRC_PORT. To align offload behavior with non-offload, the OVS community introduced a commit ( netdev-offload-tc: Fix offload of tunnel key tp_src) that causes offload to fail if this tunnel attribute is used. Now, any rule with a tunnel set action that includes a tunnel source port can no longer be offloaded.
    • LLDP traffic from VFs or BF host PFs was not reaching the representor kernel interfaces.
    • Flows where both the inner and outer destination (dst) and/or source (src) MAC addresses were rewritten to the same value, the outer MAC address rewrite was ignored, leading to an outer MAC address of 00:00:00:00:00:00.
    • Enabling sFlow with OVN caused OVS to crash.
    • OVS crashed unexpectedly after DPUs repeatedly broadcast the error message “packet with own source address.”
    • Changing the hw-offload setting from true to false while ports were configured led to errors reported in the OVS log.
    ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Updated the default Secure Boot dbx to mitigate CVE-2025-3052.

    ]]>         Updated the default Secure Boot dbx to mitigate CVE-2025-3052.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.R for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where changing BIOS settings via Redfish would fail if a BIOS update was performed during the same boot.

    Remove Expired SUSE and VMware Certificates.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.R for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where changing BIOS settings via Redfish would fail if a BIOS update was performed during the same boot.

    Remove Expired SUSE and VMware Certificates.

    Known Issues:

    None]]>
  • Initial version for UBM FWPKG.
  • Support RHEL9 and ESXi8.0
    • ]]>
  • Initial version for UBM FWPKG.
  • Support RHEL9 and ESXi8.0
    • ]]>
  • Initial version for UBM FWPKG.
  • Support RHEL9 and ESXi8.0
    • ]]>
  • Initial version for UBM FWPKG.
  • Support RHEL9 and ESXi8.0
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during  Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during  Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
    • ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

    ]]>         Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

    ]]>         Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

    ]]>         Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

    ]]>         Updated to version 14.4.731.6

    ]]>         Updated to version 14.4.731.6

    ]]>         Added support for:

    SuSE Linux Enterprise 15 SP 7

    Updated to version 14.4.473.26

    ]]>         Added support for:

    SuSE Linux Enterprise 15 SP 7

    Updated to version 14.4.473.26

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>
  • 7.36 (Aero PR11 Alpha).
    • ]]>
  • 7.36 (Aero PR11 Alpha).
    • ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • This product addressed the multicast traffic handling on PF0.
  • This product addressed the per-queue statistics for native mode.
    • ]]>
  • This product addressed the multicast traffic handling on PF0.
  • This product addressed the per-queue statistics for native mode.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Optimize thermal maximum continuous operation temperature values
    • ]]>
  • Optimize thermal maximum continuous operation temperature values
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         TBD

    ]]>         TBD

    ]]>         This product fixes issue where link disconnected with the latest Out-of-Box (OOB) Driver.

    ]]>         This product fixes issue where link disconnected with the latest Out-of-Box (OOB) Driver.

    ]]>         Updated to version 9.4.11.20

    ]]>         Updated to version 9.4.11.20

    ]]>         Updated Driver and installer Digital Signature validity

    ]]>         Updated Driver and installer Digital Signature validity

    ]]>         Updated to version 9.4.11.20

    ]]>         Updated to version 9.4.11.20

    ]]>
  • Regular FW maintenance release for sanitize, DRAM and log page fix.
    • ]]>
  • Regular FW maintenance release for sanitize, DRAM and log page fix.
    • ]]>
  • Fix for PCIe link length drop in AMD x2 system configuration
  • Fix for drive detection after hot re-insert on Windows
  • Fix for other regular FW patch release
    • ]]>
  • Fix for PCIe link length drop in AMD x2 system configuration
  • Fix for drive detection after hot re-insert on Windows
  • Fix for other regular FW patch release
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product added ethtool flags to disable MAC/VF source pruning in legacy mode.

    ]]>         This product added ethtool flags to disable MAC/VF source pruning in legacy mode.

    ]]>
  • This product fixed observed call trace during unloading driver when ts2phc is running.
  • This product fixed observed call trace with wrong unregistering devlink instance during removing driver.
    • ]]>
  • This product fixed observed call trace during unloading driver when ts2phc is running.
  • This product fixed observed call trace with wrong unregistering devlink instance during removing driver.
    • ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         Support new Gen12 servers.

    ]]>         Support new Gen12 servers.

    ]]>         Support new ML110 and DL560 Gen11 servers

    ]]>         Support new ML110 and DL560 Gen11 servers

    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 8.7 

    • Added support of Rhel 9.1 

    • Added support of SLES15 SP4

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 8.7 

    • Added support of Rhel 9.1 

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fixes a rare link loss issue and adds enhancements for drive reliability.
  • After HPG5 firmware is downloaded to the drive, the new HPG5 firmware will be active on the drive.
  • The new drive bootloader code will be activated after the next drive power cycle.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00072768en_us
    • ]]>
  • Fixes a rare link loss issue and adds enhancements for drive reliability.
  • After HPG5 firmware is downloaded to the drive, the new HPG5 firmware will be active on the drive.
  • The new drive bootloader code will be activated after the next drive power cycle.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00072768en_us
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery.
    • ]]>
  • This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>         Added Support for RHEL 10

    ]]>         Added Support for RHEL 10

    ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.8002:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.8002:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4506:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    No new Features and changes included in version 12.28.2302.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4506:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    No new Features and changes included in version 12.28.2302.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         No new fixes have been added in version 12.28.2302.

     

    The following issues have been fixed in version 16.35.4506:

     

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         No new fixes have been added in version 12.28.2302.

     

    The following issues have been fixed in version 16.35.4506:

     

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

    •  

    ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

    •  

    ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         The following enhancement has been added in this version:

    • Added support of Ubuntu 22.04 LTS

    • Added support of Ubuntu 24.04 LTS.

    ]]>         The following enhancement has been added in this version:

    • Added support of Ubuntu 22.04 LTS

    • Added support of Ubuntu 24.04 LTS.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • This product enhances the Windows driver to support PCIe compliance configuration by enabling pass-through firmware commands with long input message sizes.
  • This product enhances adding new event log warning message.
    • ]]>
  • This product enhances the Windows driver to support PCIe compliance configuration by enabling pass-through firmware commands with long input message sizes.
  • This product enhances adding new event log warning message.
    • ]]>
  • This product enhances to improve user mode RDMA abortive cleanup.
  • This product enhances FW logging to host to work across device reset.
    • ]]>
  • This product enhances to improve user mode RDMA abortive cleanup.
  • This product enhances FW logging to host to work across device reset.
    • ]]>
  • This product fixes issue where BSOD (Blue Screen of Death) occurs when install Windows Server 2025 OS on ISCSI LUN.
  • This product fixes issue where packet drops is seen when jumbo frame is enabled.
    • ]]>
  • This product fixes issue where BSOD (Blue Screen of Death) occurs when install Windows Server 2025 OS on ISCSI LUN.
  • This product fixes issue where packet drops is seen when jumbo frame is enabled.
    • ]]>         Latest FW 9.20

    ]]>         Latest FW 9.20

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.11

    09.15.15

    7.39

    NA
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.11 09.15.15 7.39 NA
    ]]>         Fixed the following :

    SFP Parameters value decimal part is truncated

    ]]>         Fixed the following :

    SFP Parameters value decimal part is truncated

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.01

    09.15.05

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.01

    09.15.05

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.01 09.15.05 7.39 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.05.01

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.01

    09.15.05

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.11.01

    09.15.05

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.11.01 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.11.01 09.15.05 7.39 0.0
    ]]>         Fixed the following:

    1. Windows BitLocker causes the system boot due to ROM signature failure during POST.
    2. Increase an internal timeout value for SPI/Flash read.
    ]]>         Fixed the following:

    1. Windows BitLocker causes the system boot due to ROM signature failure during POST.
    2. Increase an internal timeout value for SPI/Flash read.
    ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • To fix 1) chip kill -The host IO CMD may get timed out and shows SNS=04/40/C2 and 2) garbage collection checking for performance recovery.
    • ]]>
  • To fix 1) chip kill -The host IO CMD may get timed out and shows SNS=04/40/C2 and 2) garbage collection checking for performance recovery.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00146367en_us which will be active on 20-Mar-2025.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00146367en_us which will be active on 20-Mar-2025.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2026.1 guidance. This version of the SPS 04.04.04.925 (2.60_12_05_2025) should be paired with System ROM 2.60 (2026/02/05) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2026.1 guidance. This version of the SPS 04.04.04.925 (2.60_12_05_2025) should be paired with System ROM 2.60 (2026/02/05) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 04.04.04.802 (2.50_07_24_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 04.04.04.802 (2.50_07_24_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         To Do

    ]]>         To Do

    ]]>         To Do

    ]]>         To Do

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.8002:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.8002:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4506:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4506:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>
  • RSOD issue fixed. RSOD was occurred during server power-on if enable the VROC.
    • ]]>
  • RSOD issue fixed. RSOD was occurred during server power-on if enable the VROC.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product fixed the BSOD during the RX queue initialization.

    ]]>         This product fixed the BSOD during the RX queue initialization.

    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Improvement in mixed READ/WRITE performance, which was causing a field issue at an HPE customer - Improve random mix performance in TL=2048k and 512k
    • ]]>
  • Improvement in mixed READ/WRITE performance, which was causing a field issue at an HPE customer - Improve random mix performance in TL=2048k and 512k
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Added support of ESXi 9.0

    Removed support of ESXi 7.0

    ]]>         Added support of ESXi 9.0

    Removed support of ESXi 7.0

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • RC drop 6.60.8.0
    • ]]>
  • RC drop 6.60.8.0
    • ]]>
  • Fix windows tool cert expire issue.
    • ]]>
  • Fix windows tool cert expire issue.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • Firmware changes aligned for FIPS code release and one assert fix
    • ]]>
  • Firmware changes aligned for FIPS code release and one assert fix
    • ]]>         1) Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
    2) Adding other logging and FW enhancements.

    ]]>         1) Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
    2) Adding other logging and FW enhancements.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixed an intermittent traffic failure issue from a virtual function.

    ]]>         This product fixed an intermittent traffic failure issue from a virtual function.

    ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • SR 2.10.2/SR 3.5.2 RC drop
    • ]]>
  • SR 2.10.2/SR 3.5.2 RC drop
    • ]]>
  • Enhanced functionality to expose the NVMe drive form factor based on the NVMe-MI specification 
  • Optimized drive temperature checking for expander-based topologies. 
  • Added support to write transformation backup data to an additional drive that is part of a fault-tolerant RAID volume to ensure data redundancy. 
  • Added SSD life expectancy monitoring. 
  • Added support to require privileged operations token for all RDE ACTION operations, including Drive.Reset and Storage.SetEncryptionKey, improving security for data-destructive actions. 
  • Added support to provide meaningful update Interval values for Numeric Sensor PDRs, setting 5 seconds for controller temperature and 60 seconds for drive temperature sensors. 
  • Enhanced the calculation of CapacityBytes@Redfish.AllowableNumbers for Volume Capabilities. The maximum allowable value is now set to the larger of (a) the largest free space range on any existing array, or (b) the sum of unassigned drives with a common interface and media type. 
  • Enhanced DriveMetrics support by updating the schema version from 1.0.0 to 1.2.0, adding reporting for ReadIOKiBytes and WriteIOKiBytes properties. 
  • Added an enhancement to display drive vendor and model name as separate fields in the Disk Information menu, improving clarity and ease of drive identification. 
  • Added support to securely transfer encryption keys in remote key management mode. 
  • Enhanced drive writes cache status reporting in HII.
    • ]]>
  • Enhanced functionality to expose the NVMe drive form factor based on the NVMe-MI specification 
  • Optimized drive temperature checking for expander-based topologies. 
  • Added support to write transformation backup data to an additional drive that is part of a fault-tolerant RAID volume to ensure data redundancy. 
  • Added SSD life expectancy monitoring. 
  • Added support to require privileged operations token for all RDE ACTION operations, including Drive.Reset and Storage.SetEncryptionKey, improving security for data-destructive actions. 
  • Added support to provide meaningful update Interval values for Numeric Sensor PDRs, setting 5 seconds for controller temperature and 60 seconds for drive temperature sensors. 
  • Enhanced the calculation of CapacityBytes@Redfish.AllowableNumbers for Volume Capabilities. The maximum allowable value is now set to the larger of (a) the largest free space range on any existing array, or (b) the sum of unassigned drives with a common interface and media type. 
  • Enhanced DriveMetrics support by updating the schema version from 1.0.0 to 1.2.0, adding reporting for ReadIOKiBytes and WriteIOKiBytes properties. 
  • Added an enhancement to display drive vendor and model name as separate fields in the Disk Information menu, improving clarity and ease of drive identification. 
  • Added support to securely transfer encryption keys in remote key management mode. 
  • Enhanced drive writes cache status reporting in HII.
    • ]]>
  • Fixed an issue where SEDs reverting to foreign after controller reboot due to the otherwise owned flag not being saved to the datastore. 
  • Fixed an issue where multiple logical drives incorrectly showing REBUILDING simultaneously due to rebuild status not being updated properly during queued transformation and rebuild processes 
  • Fixed an issue where master key change failure on Managed SED logical drives due to LU cache flush requests conflicting with the password update process. 
  • Fixed an issue where physical drive Predictive Failure status not reported correctly by tools and iLO. 
  • Fixed an issue where controller lockup during surface scan caused by stale internal resources when handling Unrecoverable Read Errors (UREs) in unmapped logical drive regions. 
  • Fixed an issue where drives being incorrectly failed during hot-plug due to UBM backplane misreporting drive status, with firmware workaround to wait for corrected reporting. 
  • Fixed an issue where drive LED was being changed unexpectedly by preventing redundant LED commands when the current state already matches the target state. 
  • Fixed an issue where NVMe drives being dropped after SEP firmware update and reset in mixed SAS/SATA and NVMe topologies due to missed hot plug events. 
  • Fixed an issue where SATA drives could be incorrectly reported as hot-removed during spin-up by adjusting the dampen timer to align with vendor-specified TTR values. 
  • Fixed an issue that could cause NVMe drive discovery to report incorrect information due to VPD read data length and device handle conversion errors. 
  • Fixed an issue where the controller could lock up after a warm boot following a SAS Expander firmware update. 
  • Fixed an issue where Micron 6550 SED drives could fail to create a Secured Volume due to insufficient timeout during the TCG Revert process. 
  • Fixed an issue where the controller could lock up (0x1E30) under high I/O workloads when configuration changes occurred simultaneously with a LUN reset. 
  • Fixed an issue where RAID 0 could hang with I/O timeouts and LUN resets during Predictive Spare Rebuild. 
  • Fixed an issue where the controller Health state from PLDM PDRs could differ from the Storage.Status.HealthRollup value in RDE, by synchronizing the reporting logic. 
  • Fixed an issue where SSD firmware updates could fail in dual path configurations due to PLDM errors, by sending Test Unit Ready commands to clear check conditions before SCSI passthrough operations. 
  • Fixed an issue where Battery Redfish Alerts contained an incorrect OriginOfCondition pointing to a StorageController instead of the Battery resource. 
  • Fixed an issue where RDE UPDATE operations on a Volume’s ReadCachePolicy could incorrectly appear successful during a CBE rekey, by adjusting the cache update logic to return accurate results regardless of cache status. 
  • Fixed an issue where the HotspareActivationPolicy allowable values incorrectly included OnDriveFailure for RAID 0 volumes with a dedicated spare, by adding configuration checks to ensure only valid values are shown. 
  • Fixed an issue where there is a mismatch in Overall Health State and Logical Volume State during RPI, with sensors reporting Warning (Overall Health) while RDE READs ( Logical Volume State) showed OK; reporting OK during RPI is expected behavior. 
  • Fixed an issue where firmware updates on SR932 Gen11 controllers could get stuck in the APPLY state when using PLDM Type 5. The firmware now pauses background activities during image flashing to ensure timely completion. 
  • Fixed an issue where ProtectedWriteBack could incorrectly appear as an allowable WriteCachePolicy in RDE READs even without a backup power source, by requiring the power source to be connected and fully charged before publishing the option. 
  • Fixed an issue where an RDE READ on certain unsupported Drive resources could cause a controller lockup, by adding bounds checking in the firmware API. 
  • Fixed an issue where deleting volumes through PLDM Type 6 could cause a controller lockup if other PLDM commands were sent simultaneously. These commands now return NOT_READY when a long-running RDE operation is in progress. 
  • Fixed an issue where disk utilities could display an invalid box number for drives after failing over to an alternative path, by ensuring only valid controller-provided information is shown. 
  • Fixed an issue where an incorrect error message was shown in HII when creating a logical drive on a locked SED, by updating the error message to correctly reflect SED encryption. 
    • ]]>
  • Fixed an issue where SEDs reverting to foreign after controller reboot due to the otherwise owned flag not being saved to the datastore. 
  • Fixed an issue where multiple logical drives incorrectly showing REBUILDING simultaneously due to rebuild status not being updated properly during queued transformation and rebuild processes 
  • Fixed an issue where master key change failure on Managed SED logical drives due to LU cache flush requests conflicting with the password update process. 
  • Fixed an issue where physical drive Predictive Failure status not reported correctly by tools and iLO. 
  • Fixed an issue where controller lockup during surface scan caused by stale internal resources when handling Unrecoverable Read Errors (UREs) in unmapped logical drive regions. 
  • Fixed an issue where drives being incorrectly failed during hot-plug due to UBM backplane misreporting drive status, with firmware workaround to wait for corrected reporting. 
  • Fixed an issue where drive LED was being changed unexpectedly by preventing redundant LED commands when the current state already matches the target state. 
  • Fixed an issue where NVMe drives being dropped after SEP firmware update and reset in mixed SAS/SATA and NVMe topologies due to missed hot plug events. 
  • Fixed an issue where SATA drives could be incorrectly reported as hot-removed during spin-up by adjusting the dampen timer to align with vendor-specified TTR values. 
  • Fixed an issue that could cause NVMe drive discovery to report incorrect information due to VPD read data length and device handle conversion errors. 
  • Fixed an issue where the controller could lock up after a warm boot following a SAS Expander firmware update. 
  • Fixed an issue where Micron 6550 SED drives could fail to create a Secured Volume due to insufficient timeout during the TCG Revert process. 
  • Fixed an issue where the controller could lock up (0x1E30) under high I/O workloads when configuration changes occurred simultaneously with a LUN reset. 
  • Fixed an issue where RAID 0 could hang with I/O timeouts and LUN resets during Predictive Spare Rebuild. 
  • Fixed an issue where the controller Health state from PLDM PDRs could differ from the Storage.Status.HealthRollup value in RDE, by synchronizing the reporting logic. 
  • Fixed an issue where SSD firmware updates could fail in dual path configurations due to PLDM errors, by sending Test Unit Ready commands to clear check conditions before SCSI passthrough operations. 
  • Fixed an issue where Battery Redfish Alerts contained an incorrect OriginOfCondition pointing to a StorageController instead of the Battery resource. 
  • Fixed an issue where RDE UPDATE operations on a Volume’s ReadCachePolicy could incorrectly appear successful during a CBE rekey, by adjusting the cache update logic to return accurate results regardless of cache status. 
  • Fixed an issue where the HotspareActivationPolicy allowable values incorrectly included OnDriveFailure for RAID 0 volumes with a dedicated spare, by adding configuration checks to ensure only valid values are shown. 
  • Fixed an issue where there is a mismatch in Overall Health State and Logical Volume State during RPI, with sensors reporting Warning (Overall Health) while RDE READs ( Logical Volume State) showed OK; reporting OK during RPI is expected behavior. 
  • Fixed an issue where firmware updates on SR932 Gen11 controllers could get stuck in the APPLY state when using PLDM Type 5. The firmware now pauses background activities during image flashing to ensure timely completion. 
  • Fixed an issue where ProtectedWriteBack could incorrectly appear as an allowable WriteCachePolicy in RDE READs even without a backup power source, by requiring the power source to be connected and fully charged before publishing the option. 
  • Fixed an issue where an RDE READ on certain unsupported Drive resources could cause a controller lockup, by adding bounds checking in the firmware API. 
  • Fixed an issue where deleting volumes through PLDM Type 6 could cause a controller lockup if other PLDM commands were sent simultaneously. These commands now return NOT_READY when a long-running RDE operation is in progress. 
  • Fixed an issue where disk utilities could display an invalid box number for drives after failing over to an alternative path, by ensuring only valid controller-provided information is shown. 
  • Fixed an issue where an incorrect error message was shown in HII when creating a logical drive on a locked SED, by updating the error message to correctly reflect SED encryption. 
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fixes a rare link loss issue and adds enhancements for drive reliability.
  • After HPG5 firmware is downloaded to the drive, the new HPG5 firmware will be active on the drive.
  • The new drive bootloader code will be activated after the next drive power cycle.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00072768en_us
    • ]]>
  • Fixes a rare link loss issue and adds enhancements for drive reliability.
  • After HPG5 firmware is downloaded to the drive, the new HPG5 firmware will be active on the drive.
  • The new drive bootloader code will be activated after the next drive power cycle.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00072768en_us
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         This product now supports Azure Local 24H2.

    ]]>         This product now supports Azure Local 24H2.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.8002:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.8002:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.4506:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.4506:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         No new issues have been fixed in version 12.28.2302.

     

    The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         No new issues have been fixed in version 12.28.2302.

     

    The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>         Updated to version 14.4.731.6

    ]]>         Updated to version 14.4.731.6

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>
  • This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.
  • This product enhanced media type detection function on PHY on 100G adapter.
    • ]]>
  • This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.
  • This product enhanced media type detection function on PHY on 100G adapter.
    • ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • SR 2.10.2/SR 3.5.2 RC
    • ]]>
  • SR 2.10.2/SR 3.5.2 RC
    • ]]>
  • Fixed PSOD indicates a divide-by-zero happened. 
  • Fixed an issue where the driver's controller structure field was too small for the full ASCII firmware version. 
  • Fixed an issue where a message from a periodic check on the controller heartbeat appeared as a system error instead of an informational message. 
  • Fixed an issue where firmware versioning information was incorrect or blank on some of the controllers. 
  • Fixed an issue where in a specific scenario, the device removal handler attempts to remove a device that has already been removed by the normal device discovery flow.
    • ]]>
  • Fixed PSOD indicates a divide-by-zero happened. 
  • Fixed an issue where the driver's controller structure field was too small for the full ASCII firmware version. 
  • Fixed an issue where a message from a periodic check on the controller heartbeat appeared as a system error instead of an informational message. 
  • Fixed an issue where firmware versioning information was incorrect or blank on some of the controllers. 
  • Fixed an issue where in a specific scenario, the device removal handler attempts to remove a device that has already been removed by the normal device discovery flow.
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated supported environments
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Improve the FW about data mismatch after SPL
    • ]]>
  • Improve the FW about data mismatch after SPL
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2026.1 guidance. This version of the SPS 04.04.04.925 (2.60_12_05_2025) should be paired with System ROM 2.60 (2026/02/05) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2026.1 guidance. This version of the SPS 04.04.04.925 (2.60_12_05_2025) should be paired with System ROM 2.60 (2026/02/05) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 04.04.04.802 (2.50_07_24_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 04.04.04.802 (2.50_07_24_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.8002:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.8002:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4506:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    No new Features and changes included in version 12.28.2302.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4506:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    No new Features and changes included in version 12.28.2302.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         No new fixes have been added in version 12.28.2302.

     

    The following issues have been fixed in version 16.35.4506:

     

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         No new fixes have been added in version 12.28.2302.

     

    The following issues have been fixed in version 16.35.4506:

     

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>         Added Support for RHEL 10

    ]]>         Added Support for RHEL 10

    ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>         Updated with XD220 and XD295 nodes

    ]]>         Updated with XD220 and XD295 nodes

    ]]>         Initial release

    ]]>         Initial release

    ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         This product now supports Azure Local 24H2.

    ]]>         This product now supports Azure Local 24H2.

    ]]>         Add Azure support.

    ]]>         Add Azure support.

    ]]>         Important Notes:

    Ver. 1.0.0.22(I) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision I if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(I) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision I if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(F) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision F if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(F) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision F if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    This Linux component is compatible with Service Pack for ProLiant 2024.11.00.00.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>
  • ESXi 9.1 support
    • ]]>
  • ESXi 9.1 support
    • ]]>
  • Added ESXi9.0 support.
    • ]]>
  • Added ESXi9.0 support.
    • ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         TBD

    ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         This product enhanced the compatibility with firmware.

    ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>
  • A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number.
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
     
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number.
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
     
    • ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>         TBD

    ]]>         TBD

    ]]>
  • This product fixes the issue where ESXi Datastore not seen when NPAR is enabled.
  • This product fixes the issue where PSOD is seen when enable NPAR using 2 NICs.

    •  

    ]]>
  • This product fixes the issue where ESXi Datastore not seen when NPAR is enabled.
  • This product fixes the issue where PSOD is seen when enable NPAR using 2 NICs.

    •  

    ]]>
  • RC drop 6.60.8.0
    • ]]>
  • RC drop 6.60.8.0
    • ]]>
  • Fix windows tool cert expire issue.
    • ]]>
  • Fix windows tool cert expire issue.
    • ]]>         Initial release

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Upgraded to version 26.45.1020

    ]]>         Upgraded to version 26.45.1020

    ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.8002:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

     

    Changes included in product version 1.0.2(A):

    • Support added for VMWare ESXi 9.1.

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.8002:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

     

    Changes included in product version 1.0.2(A):

    • Support added for VMWare ESXi 9.1.

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.8002:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 12.28.4704:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.8002:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.4704:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

     

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 12.28.4704.

     

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>
  • SR 2.10.2/SR 3.5.2 RC drop.
    • ]]>
  • SR 2.10.2/SR 3.5.2 RC drop.
    • ]]>
  • Added a timeout value to RAID path requests to physical devices.
    • ]]>
  • Added a timeout value to RAID path requests to physical devices.
    • ]]>
  • Fixed an issue where the kernel call trace when calling smp_processor_id() in real-time kernel. 
  • Fixed an issue of accessing NULL SCSI device pointer caused by a rare race condition. 
  • Fixed a system crash issue caused by a divide-by-zero condition. 
  • Fixed an issue where after a device has been removed, it's possible for a previously scheduled work item for a LUN reset to be executed. 
    • ]]>
  • Fixed an issue where the kernel call trace when calling smp_processor_id() in real-time kernel. 
  • Fixed an issue of accessing NULL SCSI device pointer caused by a rare race condition. 
  • Fixed a system crash issue caused by a divide-by-zero condition. 
  • Fixed an issue where after a device has been removed, it's possible for a previously scheduled work item for a LUN reset to be executed. 
    • ]]>
  • 7.36 Aero PR11 GCA
    • ]]>
  • 7.36 Aero PR11 GCA
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • 7.36 (Aero PR11 PA3)
    • ]]>
  • 7.36 (Aero PR11 PA3)
    • ]]>
  • Fix windows tool cert expire issue.
    • ]]>
  • Fix windows tool cert expire issue.
    • ]]>
  • To fix chip kill -The host IO CMD may get timed out and shows SNS=04/40/C2.
    • ]]>
  • To fix chip kill -The host IO CMD may get timed out and shows SNS=04/40/C2.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00146367en_us which will be active on 20-Mar-2025.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00146367en_us which will be active on 20-Mar-2025.
    • ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Updated the default Secure Boot dbx to mitigate CVE-2025-3052.

    ]]>         Updated the default Secure Boot dbx to mitigate CVE-2025-3052.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.R for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where changing BIOS settings via Redfish would fail if a BIOS update was performed during the same boot.

    Remove Expired SUSE and VMware Certificates.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.R for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where changing BIOS settings via Redfish would fail if a BIOS update was performed during the same boot.

    Remove Expired SUSE and VMware Certificates.

    Known Issues:

    None]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
  • This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.0
    • ]]>
  • Added Support for ESXi 9.0
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0

     

    Added Following Enhancements:

    [Redfish]:HPE specific SFP Data - Predicted days for non working stage

    [Redfish]: API to read SFP Data

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0

     

    Added Following Enhancements:

    [Redfish]:HPE specific SFP Data - Predicted days for non working stage

    [Redfish]: API to read SFP Data

    ]]>         Fixed the following:

    SPDM - Get Certificate response returns out of bound values

    ]]>         Fixed the following:

    SPDM - Get Certificate response returns out of bound values

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    ]]>         N/A.

    ]]>         N/A.

    ]]>         N/A.

    ]]>         N/A.

    ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>
  • Fix a00145710en_us: HPE MR Gen11 and Gen10 Plus Storage Controllers - Purple Screen of Death (PSOD) May Be Observed When Updating Controller Firmware Via Service Pack for ProLiant (SPP) in Remote Deployment Mode With a VMware ESXi OS
    • ]]>
  • Fix a00145710en_us: HPE MR Gen11 and Gen10 Plus Storage Controllers - Purple Screen of Death (PSOD) May Be Observed When Updating Controller Firmware Via Service Pack for ProLiant (SPP) in Remote Deployment Mode With a VMware ESXi OS
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixed an intermittent traffic failure issue from a virtual function.

    ]]>         This product fixed an intermittent traffic failure issue from a virtual function.

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation "Rome" EPYC processors.

    Addressed an issue where the iLO Remote Console could become unresponsive when a warning message appeared in the RBSU menu.

    Known Issues:

    None]]>         Updated the default Secure Boot dbx to mitigate CVE-2025-3052.

    ]]>         Updated the default Secure Boot dbx to mitigate CVE-2025-3052.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.R for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where changing BIOS settings via Redfish would fail if a BIOS update was performed during the same boot.

    Remove Expired SUSE and VMware Certificates.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.R for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where changing BIOS settings via Redfish would fail if a BIOS update was performed during the same boot.

    Remove Expired SUSE and VMware Certificates.

    Known Issues:

    None]]>         Firmware for the following devices has been updated to 14.32.1908:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.8002:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
       

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

       

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.8002:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
       

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

       

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4506:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4506:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Whitley IPU2026.1 RC update. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support of RHEL 9.1 

    • Added support of SLES15 SP4

    ]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support of RHEL 9.1 

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>         Added support for EL8000s

    ]]>         Added support for EL8000s

    ]]>         Added support for EL8000s

    ]]>         Added support for EL8000s

    ]]>
  • Firmware changes aligned for FIPS code release and one assert fix
    • ]]>
  • Firmware changes aligned for FIPS code release and one assert fix
    • ]]>         1.Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
    2. Adding other logging and FW enhancements.

    ]]>         1.Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
    2. Adding other logging and FW enhancements.

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0

     

    Added Following Enhancements:

    [RedFish]:HPE specific SFP Data - Predicted days for non working stage

    [Redfish]: API to read SFP Data
     

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0

     

    Added Following Enhancements:

    [RedFish]:HPE specific SFP Data - Predicted days for non working stage

    [Redfish]: API to read SFP Data
     

    ]]>         Fixed the following:

    SPDM - Get Certificate response returns out of bound values

    ]]>         Fixed the following:

    SPDM - Get Certificate response returns out of bound values

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Modified the SSACLI component version format to meet the new requirement from VMware ESXi for 9.1
  • Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares
  • Modified the default strip size for NVMe drives based on the Maximum Data Transfer Size (MDTS), and tools will set the default strip size to the minimum supported MDTS value when creating or migrating a logical drive
    • ]]>
  • Modified the SSACLI component version format to meet the new requirement from VMware ESXi for 9.1
  • Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares
  • Modified the default strip size for NVMe drives based on the Maximum Data Transfer Size (MDTS), and tools will set the default strip size to the minimum supported MDTS value when creating or migrating a logical drive
    • ]]>
  • Modified the SSACLI component version format to meet the new requirement from VMware ESXi for 9.1
  • Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares
  • Modified the default strip size for NVMe drives based on the Maximum Data Transfer Size (MDTS), and tools will set the default strip size to the minimum supported MDTS value when creating or migrating a logical drive
    • ]]>
  • Modified the SSACLI component version format to meet the new requirement from VMware ESXi for 9.1
  • Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares
  • Modified the default strip size for NVMe drives based on the Maximum Data Transfer Size (MDTS), and tools will set the default strip size to the minimum supported MDTS value when creating or migrating a logical drive
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • This firmware contains a fix for a data integrity issue that could occur during a power cycle while the drive is processing write commands. 
    • ]]>
  • This firmware contains a fix for a data integrity issue that could occur during a power cycle while the drive is processing write commands. 
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>         Added support for:

    SUSE Linux Enterprise Server 16

    Updated to version 14.4.731.6

    ]]>         Added support for:

    SUSE Linux Enterprise Server 16

    Updated to version 14.4.731.6

    ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Updated Supported Environments
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>
  • This product fixes the issue where 10Gb SFP (SP7053-HPE) adapters are unable to establish a link after rebooting with BCM 57504 and 5741x adapters
  • This product fixes the issue where BCM5741x NICs no longer connect after firmware 228.x FW with 10Gb-RJ45 Transceivers
    • ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         Important Notes:

    Ver. 0.2.3.0(E) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision E if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 0.2.3.0(E) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision E if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 0.2.3.0(B) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 0.2.3.0(B) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Red Hat Enterprise Linux 9.6

    Updated Driver version 10.02.14.00-k1

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Red Hat Enterprise Linux 9.6

    Updated Driver version 10.02.14.00-k1

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         TBD

    ]]>         TBD

    ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>
  • Fix a00145710en_us: HPE MR Gen11 and Gen10 Plus Storage Controllers - Purple Screen of Death (PSOD) May Be Observed When Updating Controller Firmware Via Service Pack for ProLiant (SPP) in Remote Deployment Mode With a VMware ESXi OS
    • ]]>
  • Fix a00145710en_us: HPE MR Gen11 and Gen10 Plus Storage Controllers - Purple Screen of Death (PSOD) May Be Observed When Updating Controller Firmware Via Service Pack for ProLiant (SPP) in Remote Deployment Mode With a VMware ESXi OS
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced the compatibility with firmware.

    ]]>         This product enhanced the compatibility with firmware.

    ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00150197en_us.
    • ]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00150197en_us.
    • ]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
    • ]]>
  • This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
    • ]]>
  • Fixed issues described in Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00111900en_us.
    • ]]>
  • Fixed issues described in Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00111900en_us.
    • ]]>
  • SR 2.10.2/SR 3.5.2 RC
    • ]]>
  • SR 2.10.2/SR 3.5.2 RC
    • ]]>
  • Fixed PSOD indicates a divide-by-zero happened. 
  • Fixed an issue where the driver's controller structure field was too small for the full ASCII firmware version. 
  • Fixed an issue where a message from a periodic check on the controller heartbeat appeared as a system error instead of an informational message. 
  • Fixed an issue where firmware versioning information was incorrect or blank on some of the controllers. 
  • Fixed an issue where in a specific scenario, the device removal handler attempts to remove a device that has already been removed by the normal device discovery flow.
    • ]]>
  • Fixed PSOD indicates a divide-by-zero happened. 
  • Fixed an issue where the driver's controller structure field was too small for the full ASCII firmware version. 
  • Fixed an issue where a message from a periodic check on the controller heartbeat appeared as a system error instead of an informational message. 
  • Fixed an issue where firmware versioning information was incorrect or blank on some of the controllers. 
  • Fixed an issue where in a specific scenario, the device removal handler attempts to remove a device that has already been removed by the normal device discovery flow.
    • ]]>         Resolves an issue where, with very low probability, PCIe access conflicts can result in a system hang. A signature of this failure may be found in BMC or BIOS error logs showing CPU IERR and/or CATERR reports

    ]]>         Resolves an issue where, with very low probability, PCIe access conflicts can result in a system hang. A signature of this failure may be found in BMC or BIOS error logs showing CPU IERR and/or CATERR reports

    ]]>         Latest FW Version 9.20

    ]]>         Latest FW Version 9.20

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142174en_us
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142174en_us
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142174en_us
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142174en_us
    • ]]>         The following enhancement has been added in this version:

    • Added support of Ubuntu 22.04 LTS

    • Added support of Ubuntu 24.04 LTS.

    ]]>         The following enhancement has been added in this version:

    • Added support of Ubuntu 22.04 LTS

    • Added support of Ubuntu 24.04 LTS.

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.
    • ]]>
  • This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.
    • ]]>         This product enhances to update PNP ID table（Plug and Play Identifier）

    ]]>         This product enhances to update PNP ID table（Plug and Play Identifier）

    ]]>         This product enhances to update PNP ID table. (Plug and Play Identifier)

    ]]>         This product enhances to update PNP ID table. (Plug and Play Identifier)

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Regular FW maintenance release.
    • ]]>
  • Regular FW maintenance release.
    • ]]>         Support new Gen12 servers.

    ]]>         Support new Gen12 servers.

    ]]>         Support both Gen10P and Gen11 servers

    ]]>         Support both Gen10P and Gen11 servers

    ]]>
  • This product fixes the issue where, in breakout mode, a cable remove or insert failed to bring the link up because the module did not exit the DPDeactivated (Data Path Deactivated) state in time.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
    • ]]>
  • This product fixes the issue where, in breakout mode, a cable remove or insert failed to bring the link up because the module did not exit the DPDeactivated (Data Path Deactivated) state in time.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
    • ]]>
  • This product fixes the issue where, in breakout mode, a cable remove or insert failed to bring the link up because the module did not exit the DPDeactivated (Data Path Deactivated) state in time.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
    • ]]>
  • This product fixes the issue where, in breakout mode, a cable remove or insert failed to bring the link up because the module did not exit the DPDeactivated (Data Path Deactivated) state in time.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
    • ]]>
  • This product enhances the Windows driver to support PCIe compliance configuration by enabling pass-through firmware commands with long input message sizes.
  • This product enhances adding new event log warning message.
    • ]]>
  • This product enhances the Windows driver to support PCIe compliance configuration by enabling pass-through firmware commands with long input message sizes.
  • This product enhances adding new event log warning message.
    • ]]>
  • This product enhances to improve user mode RDMA abortive cleanup.
  • This product enhances FW logging to host to work across device reset.
    • ]]>
  • This product enhances to improve user mode RDMA abortive cleanup.
  • This product enhances FW logging to host to work across device reset.
    • ]]>         This product fixes issue where packet drops is seen when jumbo frame is enabled.

    ]]>         This product fixes issue where packet drops is seen when jumbo frame is enabled.

    ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • SR 2.10.2/SR 3.5.2 RC drop.
    • ]]>
  • SR 2.10.2/SR 3.5.2 RC drop.
    • ]]>
  • Added a timeout value to RAID path requests to physical devices.
    • ]]>
  • Added a timeout value to RAID path requests to physical devices.
    • ]]>
  • Fixed an issue where the kernel call trace when calling smp_processor_id() in real-time kernel. 
  • Fixed an issue of accessing NULL SCSI device pointer caused by a rare race condition. 
  • Fixed a system crash issue caused by a divide-by-zero condition. 
  • Fixed an issue where after a device has been removed, it's possible for a previously scheduled work item for a LUN reset to be executed. 
    • ]]>
  • Fixed an issue where the kernel call trace when calling smp_processor_id() in real-time kernel. 
  • Fixed an issue of accessing NULL SCSI device pointer caused by a rare race condition. 
  • Fixed a system crash issue caused by a divide-by-zero condition. 
  • Fixed an issue where after a device has been removed, it's possible for a previously scheduled work item for a LUN reset to be executed. 
    • ]]>         Added SLES16 support

    ]]>         Added SLES16 support

    ]]>
  • Added RHEL10 support
    • ]]>
  • Added RHEL10 support
    • ]]>         Added support of ESXi 9.0

    Removed support of ESXi 7.0

    ]]>         Added support of ESXi 9.0

    Removed support of ESXi 7.0

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the SEV/SNP feature would not function correctly on the DL325 Gen10 Plus server.

    Known Issues:

    None]]>         Important Notes:

    Ver. 1.0.0.22(B) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(B) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Added ESXi 9.1 Supported Environment

    ]]>         Added ESXi 9.1 Supported Environment

    ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during  Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during  Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during  Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
    • ]]>
  • This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
  • This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during  Reboot.
  • This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed
    • ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.8002:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
       

    Changes included in product version 1.0.2(A):

    • Support added for VMWare ESXi 9.1.

     

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

       

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.8002:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
       

    Changes included in product version 1.0.2(A):

    • Support added for VMWare ESXi 9.1.

     

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

       

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.8002:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
       

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

       

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.8002:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
       

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

       

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • The issue affects SSDs with an HPE firmware version prior to 4ICRHPK3 that may result in SSD failure starting at 4,700 hours of operation, neither the SSD nor the data can be recovered, after the SSD failure occurs.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00111900en_us
  • Fixed CA https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00126514en_us
    • ]]>
  • The issue affects SSDs with an HPE firmware version prior to 4ICRHPK3 that may result in SSD failure starting at 4,700 hours of operation, neither the SSD nor the data can be recovered, after the SSD failure occurs.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00111900en_us
  • Fixed CA https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00126514en_us
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>
  • Verified the UNMAP command and confirmed that the Block Limits VPD page data is correct with the latest firmware.
    • ]]>
  • Verified the UNMAP command and confirmed that the Block Limits VPD page data is correct with the latest firmware.
    • ]]>
  • Fix a potential mutex deadlock between reset and event handling thread. The issue may happen when there is heavy IO, device add/delete and SCSI rescan running in the same time.
    • ]]>
  • Fix a potential mutex deadlock between reset and event handling thread. The issue may happen when there is heavy IO, device add/delete and SCSI rescan running in the same time.
    • ]]>
  • Added Azure Local 24H2 OS support.
    • ]]>
  • Added Azure Local 24H2 OS support.
    • ]]>
  • Fix windows tool cert expire issue.
    • ]]>
  • Fix windows tool cert expire issue.
    • ]]>         Fixed online force flash issue on OneView.

    ]]>         Fixed online force flash issue on OneView.

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2026.1 guidance. This version of the SPS 04.04.04.925 (2.60_12_05_2025) should be paired with System ROM 2.60 (2026/02/05) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2026.1 guidance. This version of the SPS 04.04.04.925 (2.60_12_05_2025) should be paired with System ROM 2.60 (2026/02/05) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 04.04.04.802 (2.50_07_24_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 04.04.04.802 (2.50_07_24_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         TBD

    ]]>         TBD

    ]]>
  • This product corrects an issue which fix TSO (TCP Segmentation Offload) issue when single segment is larger than pkt length.
  • This product corrects an issue which PSOD while freeing DMA during 'esxcli qlfastlinq qcc' command execution.
    • ]]>
  • This product corrects an issue which fix TSO (TCP Segmentation Offload) issue when single segment is larger than pkt length.
  • This product corrects an issue which PSOD while freeing DMA during 'esxcli qlfastlinq qcc' command execution.
    • ]]>
  • This product enhances the Windows driver to support PCIe compliance configuration by enabling pass-through firmware commands with long input message sizes.
  • This product enhances adding new event log warning message.
    • ]]>
  • This product enhances the Windows driver to support PCIe compliance configuration by enabling pass-through firmware commands with long input message sizes.
  • This product enhances adding new event log warning message.
    • ]]>
  • This product enhances to improve user mode RDMA abortive cleanup.
  • This product enhances FW logging to host to work across device reset.
    • ]]>
  • This product enhances to improve user mode RDMA abortive cleanup.
  • This product enhances FW logging to host to work across device reset.
    • ]]>         This product fixes issue where packet drops is seen when jumbo frame is enabled.

    ]]>         This product fixes issue where packet drops is seen when jumbo frame is enabled.

    ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00138902en_us which will be active on 24-April-2024.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00138902en_us which will be active on 24-April-2024.
    • ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>         Regular Firmware changes included:

    •     corner case performance enhance.
    •     Servo change that resolves issue with early heat application from Idle sweep seek terminated that may cause read errors.
    ]]>         This product now supports Azure Local 24H2.

    ]]>         This product now supports Azure Local 24H2.

    ]]>         Add Windows Server 2025 support.

    ]]>         Add Windows Server 2025 support.

    ]]>         This product resolves possible memory leak found in code scanning.

    ]]>         This product resolves possible memory leak found in code scanning.

    ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated supported environments
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Fix drive flash issue when drive behind the controller in a specific scenario.
    • ]]>
  • Fix drive flash issue when drive behind the controller in a specific scenario.
    • ]]>
  • Fix drive flash issue when drive behind the controller in a specific scenario.
    • ]]>
  • Fix drive flash issue when drive behind the controller in a specific scenario.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Reliability enhancements and VENDOR IDENTIFICATION field change from “HP” to HPE”.
    • ]]>
  • Reliability enhancements and VENDOR IDENTIFICATION field change from “HP” to HPE”.
    • ]]>         Driver version 5.4.86.0-1
    This driver is only supported on VMware ESXi 8.0u3

     

    ]]>         Driver version 5.4.86.0-1
    This driver is only supported on VMware ESXi 8.0u3

     

    ]]>         Driver version 5.4.85.0-1
    This driver is only supported on VMware ESXi 8.0u3

     

    ]]>         Driver version 5.4.85.0-1
    This driver is only supported on VMware ESXi 8.0u3

     

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • 7.36 (Aero PR11 Alpha).
    • ]]>
  • 7.36 (Aero PR11 Alpha).
    • ]]>

  • Fix windows tool cert expire issue.

    • ]]>

  • Fix windows tool cert expire issue.

    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Implements FW-based VPD.
  • ARP setting is changed from “Capable & Discoverable” to “Fixed & Discoverable”.
  • A minor tweak to the Foreground Media Scan (FMS) algorithm to ensure critical variables are initialized properly.
    • ]]>
  • Implements FW-based VPD.
  • ARP setting is changed from “Capable & Discoverable” to “Fixed & Discoverable”.
  • A minor tweak to the Foreground Media Scan (FMS) algorithm to ensure critical variables are initialized properly.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.0
    • ]]>
  • Added Support for ESXi 9.0
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product fixed the BSOD during the RX queue initialization.

    ]]>         This product fixed the BSOD during the RX queue initialization.

    ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up
    • ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up
    • ]]>
  • 7.36 (Aero PR11 Alpha).
    • ]]>
  • 7.36 (Aero PR11 Alpha).
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>
  • Add support for users to clear NVRAM using Factory Repurpose operation
    • Command: storcli /cx set factory repurpose
    • ]]>         New features and changes included in version 22.46.3048:

    • Added support for RSS with crypto offload enabling the NIC to parallelize packet processing across CPU cores while performing encryption/decryption in hardware. Additionally, introduced a new l4_type_ext parameter with values: 0 (None), 1 (TCP), 2 (UDP), 3 (ICMP).
    • Added an extra validation for the payload_len field in incoming NC-SI messages. Previously, invalid packets might have been accepted; now, such packets are silently dropped.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 22.46.3048:

    • Added support for RSS with crypto offload enabling the NIC to parallelize packet processing across CPU cores while performing encryption/decryption in hardware. Additionally, introduced a new l4_type_ext parameter with values: 0 (None), 1 (TCP), 2 (UDP), 3 (ICMP).
    • Added an extra validation for the payload_len field in incoming NC-SI messages. Previously, invalid packets might have been accepted; now, such packets are silently dropped.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 22.46.3048:

    • Configuring a small MTU led to fragmentation of packets critical for the PXE boot process. As a result, the PXE boot filters mistakenly discarded these packets, causing the PXE boot to fail.
    ]]>         The following issues have been fixed in version 22.46.3048:

    • Configuring a small MTU led to fragmentation of packets critical for the PXE boot process. As a result, the PXE boot filters mistakenly discarded these packets, causing the PXE boot to fail.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No new features and changes have been included in version 22.45.1020.

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    No new features and changes have been included in version 22.45.1020.

    ]]>         The following issues have been fixed in version 22.45.1020:

    • PCC_CNP_COUNT could not be reset using the pcc_counter.sh script in the DOCA tools.
    • VQoS algorithm issue related to learning when an element is active and when it begins sending traffic.
    • A race condition that would prevent the application from transmitting when VQoS was enabled.
    • Bandwidth would drop when unbinding multiple VFs with VQoS enabled.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         The following issues have been fixed in version 22.45.1020:

    • PCC_CNP_COUNT could not be reset using the pcc_counter.sh script in the DOCA tools.
    • VQoS algorithm issue related to learning when an element is active and when it begins sending traffic.
    • A race condition that would prevent the application from transmitting when VQoS was enabled.
    • Bandwidth would drop when unbinding multiple VFs with VQoS enabled.
    • RTT packets with any destination MAC address were incorrectly treated as having a valid destination MAC. The new firmware now discards RTT packets if their destination MAC does not match the port's MAC.
    ]]>         Added support for Windows 2025

    ]]>         Added support for Windows 2025

    ]]>         None.

    ]]>         None.

    ]]>         Added support for Windows 2025

    ]]>         Added support for Windows 2025

    ]]>         None.

    ]]>         None.

    ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • This is a planned maintenance release covering bug fixes. This firmware includes updates to improve PLI circuit reliability.
    • ]]>
  • This is a planned maintenance release covering bug fixes. This firmware includes updates to improve PLI circuit reliability.
    • ]]>
  • HPG3 is a planned maintenance release covering bug fixes for 2.5” and M.2. There are no critical functional updates, and risk is low for customers who do not upgrade, especially if drives are not stored without power for a long period of time (~2 years).
    • ]]>
  • HPG3 is a planned maintenance release covering bug fixes for 2.5” and M.2. There are no critical functional updates, and risk is low for customers who do not upgrade, especially if drives are not stored without power for a long period of time (~2 years).
    • ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.8002:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.8002:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4506:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4506:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Updated Driver version 10.02.15.00-k1

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Red Hat Enterprise Linux 9.6

    Updated Driver version 10.02.14.00-k1

    ]]>         Added Support For:

    Red Hat Enterprise Linux 10

    Red Hat Enterprise Linux 9.6

    Updated Driver version 10.02.14.00-k1

    ]]>
  • Improvements to our out-of-band message handling to ensure robust device management capabilities
  • Changes to improve our PCIe link compatibility as well as device reliability
  • This firmware update is recommended as it improves our system interoperability and prevents specific scenarios that could cause the drive to become unresponsive.
    • ]]>
  • Improvements to our out-of-band message handling to ensure robust device management capabilities
  • Changes to improve our PCIe link compatibility as well as device reliability
  • This firmware update is recommended as it improves our system interoperability and prevents specific scenarios that could cause the drive to become unresponsive.
    • ]]>
  • Improvements to our out-of-band message handling to ensure robust device management capabilities
  • Changes to improve our PCIe link compatibility as well as device reliability
  • This firmware update is recommended as it improves our system interoperability and prevents specific scenarios that could cause the drive to become unresponsive.
    • ]]>
  • Improvements to our out-of-band message handling to ensure robust device management capabilities
  • Changes to improve our PCIe link compatibility as well as device reliability
  • This firmware update is recommended as it improves our system interoperability and prevents specific scenarios that could cause the drive to become unresponsive.
    • ]]>         New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    ]]>         No fixes are included in version 14.32.1908.

    ]]>         Firmware for the following device has been updated to 14.32.1904:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

    ]]>         Firmware for the following device has been updated to 14.32.1904:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.
    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product added PHY-based PTP for Intel E610 OCP.

    ]]>         This product added PHY-based PTP for Intel E610 OCP.

    ]]>         This product fixed Intel E610 OCP Firmware OROM version display in Linux environment.

    ]]>         This product fixed Intel E610 OCP Firmware OROM version display in Linux environment.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>         This product fixes an issue where the VM traffic may not working when VF driver disabled or not installed.

    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 20.43.8002:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         The following issues have been fixed in version 20.43.8002:

    • Enabling DIM led to high IRQ/s in certain scenarios.
    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         No changes or new features have been included in version 20.43.2566.

    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>         The following issues have been fixed in version 20.43.2566:

    • Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.
    ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         BCM235_GCA2 

    ]]>         BCM235_GCA2 

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         HPE signing key cert update

    ]]>         HPE signing key cert update

    ]]>         Initial release

    ]]>         Initial release

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product correct an issue which fixes high EnsNetWorlds CPU utilization

    ]]>         This product correct an issue which fixes high EnsNetWorlds CPU utilization

    ]]>
  • Modified the SSACLI component version format to meet the new requirement from VMware ESXi for 9.1
  • Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares
  • Modified the default strip size for NVMe drives based on the Maximum Data Transfer Size (MDTS), and tools will set the default strip size to the minimum supported MDTS value when creating or migrating a logical drive
    • ]]>
  • Modified the SSACLI component version format to meet the new requirement from VMware ESXi for 9.1
  • Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares
  • Modified the default strip size for NVMe drives based on the Maximum Data Transfer Size (MDTS), and tools will set the default strip size to the minimum supported MDTS value when creating or migrating a logical drive
    • ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
  • Fixed an issue where the last failure reason was not listing on physical drives. 
  • Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode. 
  • Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume. 
  • Fixed an issue where a duplicate entry for the physical drive was displayed. 
    • ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
  • Fixed an issue where the last failure reason was not listing on physical drives. 
  • Fixed an issue where SSAScripting failed to create an encrypted volume while in express local mode. 
  • Fixed an issue where an error/warning message was not being generated correctly while expanding a RAID 1+0 volume. 
  • Fixed an issue where a duplicate entry for the physical drive was displayed. 
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated supported environments
    • ]]>         Updated to version 14.4.731.6

    ]]>         Updated to version 14.4.731.6

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>         Added support for:

    Red Hat Enterprise Linux 10.0

    Updated to version 14.4.473.24

    ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

    ]]>         This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.

    ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         TBD

    ]]>         TBD

    ]]>         Initial version for VMware 9.0.

    ]]>         Initial version for VMware 9.0.

    ]]>         correct deb comsig file issue.

    ]]>         correct deb comsig file issue.

    ]]>         Initial release

    ]]>         Initial release

    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
     
    • ]]>
  • Added support for Azure Stack HCI 23H2.
     
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         This prodcut has a minor change on updating the package scripts.

    ]]>         This prodcut has a minor change on updating the package scripts.

    ]]>         This prodcut has a minor change on updating the package scripts.

    ]]>         This prodcut has a minor change on updating the package scripts.

    ]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>         Support ESXi8.0

    ]]>         Support ESXi8.0

    ]]>
  • Support HPE ProLiant DL325 Gen10 Plus Server
    • ]]>
  • Support HPE ProLiant DL325 Gen10 Plus Server
    • ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Added support of ESXi 9.0

    Removed support of ESXi 7.0

    ]]>         Added support of ESXi 9.0

    Removed support of ESXi 7.0

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • This product enhances the Windows driver to support PCIe compliance configuration by enabling pass-through firmware commands with long input message sizes.
  • This product enhances adding new event log warning message.
     
    • ]]>
  • This product enhances the Windows driver to support PCIe compliance configuration by enabling pass-through firmware commands with long input message sizes.
  • This product enhances adding new event log warning message.
     
    • ]]>
  • This product enhances to improve user mode RDMA abortive cleanup.
  • This product enhances FW logging to host to work across device reset.
    • ]]>
  • This product enhances to improve user mode RDMA abortive cleanup.
  • This product enhances FW logging to host to work across device reset.
    • ]]>         This product fixes issue where packet drops is seen when jumbo frame is enabled.

    ]]>         This product fixes issue where packet drops is seen when jumbo frame is enabled.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product added PHY-based PTP for Intel E610 OCP.

    ]]>         This product added PHY-based PTP for Intel E610 OCP.

    ]]>         This product fixed Intel E610 OCP Firmware OROM version display in Linux environment.

    ]]>         This product fixed Intel E610 OCP Firmware OROM version display in Linux environment.

    ]]>
  • 7.36 Aero PR11 GCA
    • ]]>
  • 7.36 Aero PR11 GCA
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements
    • Redfish Volume Transformation Support
      • POST #Volume.ChangeRAIDLayout: RAID Layout Change. Change in the RAID Layout is achieved by providing the target RAIDType and the list of the drives in the input JSON body.
      • POST #Volume.ChangeRAIDLayout: Resize. ChangeRAIDLayout can be used to resize the volume by adding new Unconfigured Good drives without changing the RAIDType. In such cases RAIDType must not be provided in the input JSON body but the full drive list must be provided accordingly.
      • PATCH Volume[CapacityBytes]: This operation is used for resizing the volume when there is unused size available in the volume. There is no scope for adding any new drives here
      • POST #Volume.CheckConsistency: This operation starts Consistency Check operation on the volume. No input is expected for this operation.
    • Redfish Metrics GET Support
      • StorageControllerMetrics: UncorrectableECCErrorCount, CorrectableECCErrorCount, CorrectableParityErrorCount, StateChangeCount
      • PortMetrics: SAS.InvalidDwordCount, SAS.LossOfDwordSynchronizationCount, SAS.RunningDisparityErrorCount, PCIeErrors.CorrectableErrorCount, PCIeErrors.FatalErrorCount, PCIeErrors.NonFatalErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or Redfish ResetToDefaults.ResetAll.
  • Add support for users to clear NVRAM using MRSA and storcli Factory Repurpose operation.
    • Clear NVRAM operation is not allowed if there is any configuration present on the controller or if there is any pinned cache.
    • After clearing NVRAM, controller FW performs Online Controller Reset (OCR). If for some reason OCR cannot be performed, then the user will be notified to perform a system reboot.
    • The Clear NVRAM operation is equivalent to Redfish ResetToDefaults.ResetAll operation functionally.
  • Change the backplane bay count information to the actual bay that is connected to controller. For non-hotplug configuration, controller always shows 16 bays.
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>
  • Fix a00143124en_us Advisory: HPE MR Gen11 Controller - MR Gen11 Controllers on HPE Gen11 Servers May Fail to Generate "WriteCacheDataLoss" in the IML
  • Fix a00148035en_us Advisory: HPE MR Gen11 Controllers - The Bay And Box NVMe Drive Location Is Not Displayed in the One-Time Boot Menu
  • Fix an issue that Read/Write transfers over 128KB on LTO fail in Linux OS
  • Fix an issue that Backup Exec doesn’t work with LTO
  • Fix an issue that controller might be dropped by the iLO in server boot up when there are 240 Logical Drives are configured
  • Fix a rare issue that server health shows critical temporally when remove drive continuously.
  • Fix an issue that unexpected PCIConfiglink page events, Task management to the virtual SES device time out messages are logged in snapdump
  • Fix an issue that Slot capable protocol is missing for empty bay
  • Fix an issue that Link Speed for LTO connected to controller shows Unknown
  • Fix an issue that Request Sense command causes task management on the drive where sanitization is in progress.
  • Fix an issue that Redfish PATCH StorageController[ControllerRates] silently sets random values when the value beyond 255 is used.
  • Fix an issue that incorrect controller error event may be logged when controller is configured as passthrough and do vm reboot
  • Fix an issue that active width, current speed are wrong in Redfish Fabric port when two backplanes connected to same storage port.
  • Fix a rare issue that NVMe drive link status may fail after reboot 
  • Fix a rare issue that controller may assert when there are multiple drives removed and inserted in a short time
  • Fix an issue that sanitize percentage does not progress on SATA drives if there is SATA passthrough command running
  • Fix an issue that sanitize percentage does not progress on NVMe drives
  • Fix a rare issue that IO timeout and device reset may occur with stress test of Read/Write and Non-Read/Write commands
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>         This product adds Automatic Link on Startup option under the NIC Configuration in HPE RBSU menu.

    ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • This product fixed PXE Boot does not work when MS secured-core enabled with HPE ProLiant Gen11 AMD platform server.
  • This product fixed Link Speed selection under NIC Configuration in HPE RBSU menu.
     
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H for AMD 3rd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC processors.

    Known Issues:

    None]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Fixed Reset issue and regular maintenance firmware update.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         To mitigate the symptom - After an HPE NS204i device firmware update to version 1.2.14.1022 or later, the Drive Messages may appear for HPE Gen11 or Gen12 Server Systems with NVMe SSDs Attached to HPE NS204i Devices.

    ]]>         To mitigate the symptom - After an HPE NS204i device firmware update to version 1.2.14.1022 or later, the Drive Messages may appear for HPE Gen11 or Gen12 Server Systems with NVMe SSDs Attached to HPE NS204i Devices.

    ]]>         This product resolves the issue of controllers showing up as failed intermittently.

    ]]>         This product resolves the issue of controllers showing up as failed intermittently.

    ]]>
  • Addresses a hot plug reporting concern
  • Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration
    • ]]>
  • Addresses a hot plug reporting concern
  • Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration
    • ]]>         New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>
  • Firmware changes aligned for future FIPS code release and one assert fix.
    • ]]>         NMST version 4.31.0.150

     

    This version is supported on VMware ESXi 8.0 Update 3 only.

    ]]>         NMST version 4.31.0.150

     

    This version is supported on VMware ESXi 8.0 Update 3 only.

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product fixed the BSOD during the RX queue initialization.

    ]]>         This product fixed the BSOD during the RX queue initialization.

    ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>
  • 7.36 (Aero PR11 GCA)
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0

     

     

    Added Following Enhancements:

    [Redfish]:HPE specific SFP Data - Predicted days for non working stage

    [Redfish]: API to read SFP Data

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.10

    14.4.731.10

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.10 14.4.731.10 14.4.716.0 14.4.718.0

     

     

    Added Following Enhancements:

    [Redfish]:HPE specific SFP Data - Predicted days for non working stage

    [Redfish]: API to read SFP Data

    ]]>         Fixed the following:

    SPDM - Get Certificate response returns out of bound values

    ]]>         Fixed the following:

    SPDM - Get Certificate response returns out of bound values

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.731.5

    14.4.731.5

    14.4.716.0

    14.4.718.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.731.5 14.4.731.5 14.4.716.0 14.4.718.0
    ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • An error was found in the queue fullhandling process that results in the FUA bit not getting properly set, which could lead to the drive self-initiated reset
  • The FW fix is to resolve the handling of FUA bit during the queue full handling process has been implemented
  • The FW was confirmed to resolve the issue of drives resetting under queue full handling situations.
    • ]]>
  • An error was found in the queue fullhandling process that results in the FUA bit not getting properly set, which could lead to the drive self-initiated reset
  • The FW fix is to resolve the handling of FUA bit during the queue full handling process has been implemented
  • The FW was confirmed to resolve the issue of drives resetting under queue full handling situations.
    • ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>
  • Added support for SLES16.
    • ]]>
  • Added support for SLES16.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>         New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    ]]>         No fixes are included in version 14.32.1908.

    ]]>         Firmware for the following device has been updated to 14.32.1904:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

    ]]>         Firmware for the following device has been updated to 14.32.1904:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.
    ]]>         NMST version 4.34.1.11

     

     

    ]]>         NMST version 4.34.1.11

     

     

    ]]>         NMST version 4.31.0.150

     

    This version is supported on VMware ESXi 9 Update 0 only.

    ]]>         NMST version 4.31.0.150

     

    This version is supported on VMware ESXi 9 Update 0 only.

    ]]>         Upgraded to version 22.45.1020

    ]]>         Upgraded to version 22.45.1020

    ]]>         Upgraded to version 26.43.1014

    ]]>         Upgraded to version 26.43.1014

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>         Feature Change: Removal of virtualization from E1R driver.

    ]]>
  • Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares
  • Modified the default strip size for NVMe drives based on the Maximum Data Transfer Size (MDTS), and tools will set the default strip size to the minimum supported MDTS value when creating or migrating a logical drive
    • ]]>
  • Added spare type decoding in Array Diagnostic Utility (ADU) reports to indicate whether a logical drive uses dedicated or auto-replace spares
  • Modified the default strip size for NVMe drives based on the Maximum Data Transfer Size (MDTS), and tools will set the default strip size to the minimum supported MDTS value when creating or migrating a logical drive
    • ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
    • ]]>
  • Fixed the “Parity Initialization Method” information displayed for non-parity RAID levels. 
  • Fixed an issue where users were unable to clear the controller’s configuration when a foreign volume was present. 
  • Fixed an issue where a foreign-owned SED drive was being listed for array creation. 
    • ]]>
  • Improve the FW about data mismatch after SPL issued.
    • ]]>
  • Improve the FW about data mismatch after SPL issued.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         This version is in compliance with IPU 2025.3 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 05.01.05.103 should be paired with System ROM 3.70 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2025-20067. This issue is not unique to HPE servers.

    Known Issues:

    None]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>         Initial version

    ]]>         Initial version

    ]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         This product fixed an issue where the Relaxed Ordering feature was incorrectly disabled when using firmware versions newer than XX.36.2024.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>         Added support for the DOCA Telemetry Library on Windows.

    ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>
  • This product fixed an issue that could cause a BSOD during the suspend/resume process when the firmware is not functional.
  • This product fixed an issue where "Mlx5Cmd -Stat" displayed incorrect physical location information on multi-segment PCI machines when the adapter was disabled.
  • This product fixed an issue where Event 399 displayed incorrect information.
  • This product fixed an issue that triggered Error events 410 and 304 when enabling or disabling pktmon on an adapter operating in VMQ/SR-IOV mode.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         Initial Build

    ]]>         Initial Build

    ]]>
  • Reliability enhancements and VENDOR IDENTIFICATION field change from “HP” to HPE”.
    • ]]>
  • Reliability enhancements and VENDOR IDENTIFICATION field change from “HP” to HPE”.
    • ]]>
  • RPM data missing from iLO GUI
    • ]]>
  • RPM data missing from iLO GUI
    • ]]>
  • Regular FW fix on assert, time-out, error log several fixes
    • ]]>
  • Regular FW fix on assert, time-out, error log several fixes
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • Added Support for ESXi 9.1
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves overall drive performance.
  • The risk of not upgrading to this firmware is the increased possibility of Drive hang-up in certain error and timing conditions.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Regular FW maintenance release for sanitize, DRAM and log page fix.
    • ]]>
  • Regular FW maintenance release for sanitize, DRAM and log page fix.
    • ]]>
  • Fix for PCIe link length drop in AMD x2 system configuration
  • Fix for drive detection after hot re-insert on Windows
  • Fix for other regular FW patch release
    • ]]>
  • Fix for PCIe link length drop in AMD x2 system configuration
  • Fix for drive detection after hot re-insert on Windows
  • Fix for other regular FW patch release
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance. This version of the SPS 06.00.03.708 (2.60_01_28_2026) should be paired with System ROM 2.60 (02/05/2026) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2026.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System ROM 2.50 (08/06/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.3 guidance.

    Known Issues:

    None]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
    • ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system PXE boot in legacy mode might fail when using the Intel I350-T4 OCP NIC.

    Addressed an issue where the system might display spurious interrupt message during Linux boot up.

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Firmware for the following devices has been updated to 14.32.1908:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.8002:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
       

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

       

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         Firmware for the following devices has been updated to 14.32.1908:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.8002:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
       

    New features and changes included in version 14.32.1908:

    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.

       

    New features and changes included in version 16.35.8002:

    • Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
    • This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         No fixes are included in version 14.32.1908.

    The following issues have been fixed in version 16.35.8002:

    • Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4506:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         Firmware for the following devices has been updated to 14.32.1904:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4506:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1904.

     

    New features and changes included in version 16.35.4506:

    • Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         The following issues have been fixed in firmware version 14.32.1904:

    • Missing QoS settings caused connectivity disruptions and packet drops.

     

    The following issues have been fixed in firmware version 16.35.4506:

    • Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.
    ]]>         TBD

    ]]>         TBD

    ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product added PHY-based PTP for Intel E610 OCP.

    ]]>         This product added PHY-based PTP for Intel E610 OCP.

    ]]>         This product fixed Intel E610 OCP Firmware OROM version display in Linux environment.

    ]]>         This product fixed Intel E610 OCP Firmware OROM version display in Linux environment.

    ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • Added fix to address a rare case where drive health queries can trigger false drive predictive failure.
    • ]]>
  • This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery.
    • ]]>
  • This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery.
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         MarSPP2026

    ]]>         MarSPP2026

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>         This product enhanced traffic flow in queue map rebalance.

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where BIOS would not retry power calibration when requested by iLO in cases where power samples were incorrect, preventing dynamic power capping from being enabled or accessed.

    Known Issues:

    None]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Added a new RBSU service option for supporting MMCFG base at 1.5GB

    Updated the warning message wording of "Intelligent Provisioning" for OEM.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.201.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU

    Known Issues:

    None]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated setup utility dependencies
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2..
    • ]]>
  • Added support for Azure Stack HCI 23H2..
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
    • ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for RHEL10.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • RPM data missing from iLO GUI
    • ]]>
  • RPM data missing from iLO GUI
    • ]]>
  • Regular FW fix on assert, time-out, error log several fixes
    • ]]>
  • Regular FW fix on assert, time-out, error log several fixes
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • This firmware contains a fix for a data integrity issue that could occur during a power cycle while the drive is processing write commands.
    • ]]>
  • This firmware contains a fix for a data integrity issue that could occur during a power cycle while the drive is processing write commands.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for SLES16
    • ]]>
  • Added support for SLES16
    • ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
    • ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added support for RHEL 10.
    • ]]>
  • Added Azure Local 24H2 OS support.
    • ]]>
  • Added Azure Local 24H2 OS support.
    • ]]>
  • Support Azure Stack HCI 23H2. 
    • ]]>
  • Support Azure Stack HCI 23H2. 
    • ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>         This product enhancement enables a self-shutdown feature to prevent overheating when certain monitoring features are disabled. 
    It applies only to newer hardware that originally shipped with firmware version 223.1.135.7 or higher and is not enabled on earlier revisions.

    ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>
  • This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
  • This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
  • This product fixes the issue where the adapter is unable to establish link after rebooting when using the “HPE 10GBASE-T SFP+ 30m RJ45 Transceiver” HPE PN 813874-B21 with vendor PN SP7053-HPE.
  • This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Local 24H2
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.1
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Added support for ESXi 9.0
    • ]]>         Updated to driver version 14.4.624.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019



     

     

    ]]>         Updated to driver version 14.4.624.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019



     

     

    ]]>         Updated Installer digital signature validity

    ]]>         Updated Installer digital signature validity

    ]]>         Updated to driver version 14.4.624.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019



     

     

    ]]>         Updated to driver version 14.4.624.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019



     

     

    ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Local 24H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Update setup utility dependencies.
    • ]]>
  • Update setup utility dependencies.
    • ]]>
  • Driver update
  • Updated supported platforms
    • ]]>
  • Driver update
  • Updated supported platforms
    • ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         This version is in compliance with IPU 2026.1 guidance.

    Enabled PXE boot capability for certain USB NICs, which will appear in the One Time Boot Menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2026.1 guidance.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems configured with Secure Boot may experience a Red Screen of Death upon removal of Microsoft Windows Production PCA certificates from the Secure Boot database.

    Known Issues:

    None]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Added new knob to set MMCFG base at 1.5GB in RBSU service menu.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system iLO Remote Console could become unresponsive when a warning message appeared in RBSU.

    Known Issues:

    None

    ]]>         Added SLES16 Support Environment

    ]]>         Added SLES16 Support Environment

    ]]>         Initial version for Red Hat Enterprise Linux 10 support.

    ]]>         Initial version for Red Hat Enterprise Linux 10 support.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>
  • This firmware provides bug fixes for the P5620/P5520.
    • ]]>
  • This firmware provides bug fixes for the P5620/P5520.
    • ]]>