new Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux DEB aarch64 Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux DEB aarch64 Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux DEB aarch64 Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux DEB aarch64 惠普企业 Hewlett Packard Enterprise 网络 Networking 服务器 Server 固件 - 网络 Firmware - Network 英语（美国） English (US) Updating firmware with rpm installed:

Install the DEB as: dpkg -i <deb_filename>.deb. This will extract the contents to the '/usr/lib/aarch64-linux-gun' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gun/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
To uninstall, run: dpkg --remove <deb_package_name>

]]> Updating firmware with rpm installed:

Install the DEB as: dpkg -i <deb_filename>.deb. This will extract the contents to the '/usr/lib/aarch64-linux-gun' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gun/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
To uninstall, run: dpkg --remove <deb_package_name>

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21)	22.46.3048	MT_0000000437

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21)	22.46.3048	MT_0000000437

]]> 15B3 101D 15B3 0042 15B3 101e 15B3 0042 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 3600 firmware:nic_mlnx_mcx623106as_cdat firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1_arm64.deb firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1_arm64.deb file://./packages/firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1/CP068330.xml ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1/acpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1/cpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1/fw-ConnectX6Dx-rel-22_46_3048-MCX623106AS-CDA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1/ilorest_chif.so ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1/mft-4.32.0-120.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1/mlxfwmanager ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068330.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068330.scexe ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-22.46.3048-1.1/hpsetup 79F0C163-0C13-4662-9DEA-09235FEF90CB MT_0000000437 10 .//fw-ConnectX6Dx-rel-22_46_3048-MCX623106AS-CDA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin 3600 1 True Firmware False a6b1a447-382a-5a4f-15b3-101d15b30042 22.46.3048 ComboFirmware RuntimeAgent new Integrated Smart Update Tools for Linux(Ubuntu) ARM64 Integrated Smart Update Tools for Linux(Ubuntu) ARM64 Integrated Smart Update Tools for Linux ARM64 Integrated Smart Update Tools for Linux ARM64 惠普企业 Hewlett Packard Enterprise Ubuntu 24.04 LTS ARM Ubuntu 22.04 LTS ARM Lights Out Lights Out 服务器 Server 应用程序 - 系统管理 Application - System Management 英语（美国） English (US) For prerequisite information, please see the iSUT Release Notes.

]]> For prerequisite information, please see the iSUT Release Notes.

]]> Download the deb package to a directory on your hard drive and change to that directory. Install by typing dpkg -i sut-XXX_arm64.deb

]]> 103C 3307 1590 00E4 103C 3307 0000 0000 103C 3306 1590 00E4 103C 3306 0000 0000 103c 3306 1590 03BA 103c 3307 1590 03BA 103c 3306 1590 3307 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:deb sut-6.5.0-13_arm64.deb Enter Polling interval in minutes. Minimum 5 minutes Maximum 1440 minutes. 0 12 0-9 * Mode in which SUT runs. 0 24 * * Enter the directory where the staging has to be done. The default path for staging directory is /var/tmp/sut/stagingdirectory. 0 255 0..9A..Z;a..z;-/ * sut-6.5.0-13_arm64.deb file://./packages/sut-6.5.0-13_arm64.deb ./README.txt ./opt/hp/hpsut/README.txt ./opt/sut/README.txt ./opt/sut/bin/gatherlogs.sh ./opt/sut/bin/hpsut ./opt/sut/bin/sut ./opt/sut/config/sut_cfg_default.dat ./opt/sut/doc/OnDemandHelp.txt ./opt/sut/schemas/SUT.json ./opt/sut/schemas/SUTProvider.json ./opt/sut/schemas/SUTProvider_Gen10.json ./opt/sut/schemas/SUTRegistryEN_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryEN_Redfish.json ./opt/sut/schemas/SUTRegistryEN_Redfish_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings.json ./opt/sut/schemas/SUTSettingsSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSettingsSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings_Gen10.json ./opt/sut/schemas/SUTSystemInventorySchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSystemInventorySchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTTasksettings.json ./opt/sut/schemas/SUTTasksettings_Legacy_zipped.json.gz ./opt/sut/schemas/SUTTasksettings_Redfish_zipped.json.gz ./opt/sut/schemas/SUT_Gen10.json ./opt/sut/scripts/sut.service ./opt/sut/scripts/sutd ./usr/share/doc/sut/changelog.gz ./usr/share/doc/sut/copyright ./usr/share/man/man8/sut.8.gz ./usr/share/smartupdate/sut/component.xml ./opt/sut/lib/x86_64-linux-gnu/libicudata.so.70 ./opt/sut/lib/x86_64-linux-gnu/libicui18n.so.70 ./opt/sut/lib/x86_64-linux-gnu/libicuuc.so.70 new Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux RPM aarch64 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 网络 Networking 服务器 Server 固件 - 网络 Firmware - Network 英语（美国） English (US) pdating firmware with rpm installed:

Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gnu' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gnu/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
To uninstall, run: rpm -e <rpm_package_name>

Updating firmware without installing rpm:

Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
This will extract the contents of the rpm to 'usr' folder in the current directory.
From the terminal, navigate to '/usr/lib/aarch64-linux-gnu/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

On Secure Boot Enable mode:

This product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
Also, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.

]]> pdating firmware with rpm installed:

Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gnu' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gnu/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
To uninstall, run: rpm -e <rpm_package_name>

Updating firmware without installing rpm:

Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
This will extract the contents of the rpm to 'usr' folder in the current directory.
From the terminal, navigate to '/usr/lib/aarch64-linux-gnu/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

On Secure Boot Enable mode:

]]> This software package contains the following firmware versions:

NVIDIA Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21)	26.46.3048	MT_0000000551

]]> This software package contains the following firmware versions:

NVIDIA Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21)	26.46.3048	MT_0000000551

]]> 15b3 101f 15b3 0007 15B3 101E 15B3 0007 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:nic_mlnx_mcx631432as_adai firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1.aarch64.rpm firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1.aarch64.rpm file://./packages/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1 ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/CP068335.xml ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/acpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/binx.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/fw-ConnectX6Lx-rel-26_46_3048-MCX631432AS-ADA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/ilorest_chif.so ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/mft-4.32.0-120.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/mlxfwmanager ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.46.3048-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068335.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068335.scexe 79F0C163-0C13-4662-9DEA-09235FEF90CB MT_0000000551 10 .//fw-ConnectX6Lx-rel-26_46_3048-MCX631432AS-ADA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin 600 1 True Firmware False a6b1a447-382a-5a4f-15b3-101f15b30012 26.46.3048 ComboFirmware RuntimeAgent new Online NVMe SSD Flash Component for Linux deb (arm64) - VV030720KYNYP Drive Online NVMe SSD Flash Component for Linux deb (arm64) - VV030720KYNYP Drive VV030720KYNYP Drive VV030720KYNYP Drive 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

Installing the firmware deb package does not update the firmware. It merely extracts the deb content to the local system. Updating the firmware on the local system requires following the above outlined steps.

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
     Online NVMe SSD Flash Component for Linux deb (arm64) - VV030720KYNYP Drive
Release Version and/or Date:
     HPK6
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
     None

Enhancements/New Features:

None

Problems Fixed:

HPK6 is a planned maintenance release that follows the HPK3 FW release for 30.72TB (8K IU) Solid State Drive. This is a recommended FW release.
For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00150459en_us

Known Issues:
None

Enhancements/New Features:

None

Problems Fixed:

HPK6 is a planned maintenance release that follows the HPK3 FW release for 30.72TB (8K IU) Solid State Drive. This is a recommended FW release.
For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00150459en_us

Known Issues:
None

]]> VV030720KYNYP CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware-hdd-399ac3ba76-0HPK6-1.1_arm64.deb firmware-hdd-399ac3ba76-0HPK6-1.1_arm64.deb file://./packages/firmware-hdd-399ac3ba76-0HPK6-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/CP069876.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/SP54308KHPK6.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/setup ./usr/lib/aarch64-linux-gnu/scexe-compat/CP069876.scexe ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP069876.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VV030720KYNYP 10 False SP54308KHPK6.rel 300 1 False Firmware False 562340a5-3056-3033-3732-304b594e5950 HPK6 Firmware RuntimeAgent new Online NVMe SSD Flash Component for Linux deb (arm64) - VR000480KXLXF Drive Online NVMe SSD Flash Component for Linux deb (arm64) - VR000480KXLXF Drive VR000480KXLXF Drive VR000480KXLXF Drive 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux deb (arm64) - VR000480KXLXF Drive

Release Version and/or Date:
HPK4

]]> VR000480KXLXF CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware-hdd-5adaf7ae6f-0HPK4-1.1_arm64.deb firmware-hdd-5adaf7ae6f-0HPK4-1.1_arm64.deb file://./packages/firmware-hdd-5adaf7ae6f-0HPK4-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/CP068505.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/GPM9A3SAHPK4.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/setup ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068505.scexe ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068505.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VR000480KXLXF 10 False GPM9A3SAHPK4.rel 300 1 False Firmware False 562340a5-3052-3030-3438-304b584c5846 HPK4 Firmware RuntimeAgent new Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux RPM aarch64 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 网络 Networking 服务器 Server 固件 - 网络 Firmware - Network 英语（美国） English (US) Updating firmware with rpm installed:

Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gun' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gun/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
To uninstall, run: rpm -e <rpm_package_name>

Updating firmware without installing rpm:

Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
This will extract the contents of the rpm to 'usr' folder in the current directory.
From the terminal, navigate to '/usr/lib/aarch64-linux-gun/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

]]> Updating firmware with rpm installed:

Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gun' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gun/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
To uninstall, run: rpm -e <rpm_package_name>

Updating firmware without installing rpm:

Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
This will extract the contents of the rpm to 'usr' folder in the current directory.
From the terminal, navigate to '/usr/lib/aarch64-linux-gun/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21)	22.46.3048	MT_0000000437

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21)	22.46.3048	MT_0000000437

]]> 15B3 101D 15B3 0042 15B3 101e 15B3 0042 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic_mlnx_mcx623106as_cdat firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1.aarch64.rpm firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1.aarch64.rpm file://./packages/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1 ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/CP068331.xml ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/acpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/binx.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/fw-ConnectX6Dx-rel-22_46_3048-MCX623106AS-CDA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/ilorest_chif.so ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/mft-4.32.0-120.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/mlxfwmanager ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.46.3048-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068331.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068331.scexe 79F0C163-0C13-4662-9DEA-09235FEF90CB MT_0000000437 10 .//fw-ConnectX6Dx-rel-22_46_3048-MCX623106AS-CDA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin 360 1 True Firmware False a6b1a447-382a-5a4f-15b3-101d15b30042 22.46.3048 ComboFirmware RuntimeAgent new Online NVMe SSD Flash Component for Linux deb (arm64) - VR000960YYXPR Drive Online NVMe SSD Flash Component for Linux deb (arm64) - VR000960YYXPR Drive VR000960YYXPR Drive VR000960YYXPR Drive 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux deb (arm64) - VR000960YYXPR Drive

Release Version and/or Date:
HPK2

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

]]> To flash this firmware package, use the following iLOrest command. See https://www.hpe.com/info/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

]]> 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system R11_1.80_01_09_2026_scp_2.10.20240201_appended_binded.fwpkg R11_1.80_01_09_2026_scp_2.10.20240201_appended_binded.fwpkg file://./packages/R11_1.80_01_09_2026_scp_2.10.20240201_appended_binded.fwpkg payload.json R11_1.80_01_09_2026_scp_2.10.20240201_appended_binded.xml R11_1.80_01_09_2026_scp_2.10.20240201_appended_binded_signed.bin 231cd606-a7f5-4ab6-bed8-823582227a3d BIOS_SCP BUNDLE 0 True R11_1.80_01_09_2026_scp_2.10.20240201_appended_binded_signed.bin 120 1 False True True False Firmware True 00000000-0000-0000-0000-000000000250 v1.80 (01/09/2026) FWPKG-v2 Firmware Bmc new Online NVMe SSD Flash Component for Linux (arm64) - VR000960YYXPR Drive Online NVMe SSD Flash Component for Linux (arm64) - VR000960YYXPR Drive VR000960YYXPR Drive VR000960YYXPR Drive 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

Installing the firmware rpm package does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux (arm64) - VR000960YYXPR Drive

Release Version and/or Date:
HPK2

]]> VR000960YYXPR CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware-hdd-1b87ca8270-HPK2-1.1.aarch64.rpm firmware-hdd-1b87ca8270-HPK2-1.1.aarch64.rpm file://./packages/firmware-hdd-1b87ca8270-HPK2-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-1b87ca8270-HPK2-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-1b87ca8270-HPK2-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-1b87ca8270-HPK2-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-1b87ca8270-HPK2-1.1/CP068510.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-1b87ca8270-HPK2-1.1/KPE9010SHPK2.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-1b87ca8270-HPK2-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-1b87ca8270-HPK2-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-1b87ca8270-HPK2-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-1b87ca8270-HPK2-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068510.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068510.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VR000960YYXPR 10 False KPE9010SHPK2.rel 300 1 False Firmware False 562340a5-3052-3030-3936-305959585052 HPK2 Firmware RuntimeAgent new Online NVMe SSD Flash Component for Linux (arm64) - VR000480KYXPQ, VR000960KYXQA and VR001920KYXQB Drive Online NVMe SSD Flash Component for Linux (arm64) - VR000480KYXPQ, VR000960KYXQA and VR001920KYXQB Drive VR000480KYXPQ, VR000960KYXQA and VR001920KYXQB Drive VR000480KYXPQ, VR000960KYXQA and VR001920KYXQB Drive 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux (arm64) - VR000480KYXPQ, VR000960KYXQA and VR001920KYXQB Drive

Release Version and/or Date:
HPK2

]]> VR000480KYXPQ VR000960KYXQA VR001920KYXQB CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-4b748c8174-HPK2-1.1.aarch64.rpm firmware-hdd-4b748c8174-HPK2-1.1.aarch64.rpm file://./packages/firmware-hdd-4b748c8174-HPK2-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/CP068508.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/KPE9010IHPK2.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068508.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068508.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VR000480KYXPQ 10 False KPE9010IHPK2.rel 300 1 False Firmware False 562340a5-3052-3030-3438-304b59585051 HPK2 VR000960KYXQA 10 False KPE9010IHPK2.rel 300 1 False Firmware False 562340a5-3052-3030-3936-304b59585141 HPK2 VR001920KYXQB 10 False KPE9010IHPK2.rel 300 1 False Firmware False 562340a5-3052-3130-3932-304b59585142 HPK2 Firmware RuntimeAgent new Online NVMe SSD Flash Component for Linux (arm64)MZXLR800HBHQ-000H3, MZXLR1T6HBJR-000H3, MZXLR3T2HBLS-000H3, MZXLR6T4HALA-000H3, MZXLR12THALA-000H3, MZXLR960HBHQ-000H3, MZXLR1T9HBJR-000H3, MZXLR3T8HBLS-000H3, MZXLR7T6HALA-000H3 and MZXLR15THALA-000H3 Drive Online NVMe SSD Flash Component for Linux (arm64)MZXLR800HBHQ-000H3, MZXLR1T6HBJR-000H3, MZXLR3T2HBLS-000H3, MZXLR6T4HALA-000H3, MZXLR12THALA-000H3, MZXLR960HBHQ-000H3, MZXLR1T9HBJR-000H3, MZXLR3T8HBLS-000H3, MZXLR7T6HALA-000H3 and MZXLR15THALA-000H3 Drive MZXLR800HBHQ-000H3, MZXLR1T6HBJR-000H3, MZXLR3T2HBLS-000H3, MZXLR6T4HALA-000H3, MZXLR12THALA-000H3, MZXLR960HBHQ-000H3, MZXLR1T9HBJR-000H3, MZXLR3T8HBLS-000H3, MZXLR7T6HALA-000H3 and MZXLR15THALA-000H MZXLR800HBHQ-000H3, MZXLR1T6HBJR-000H3, MZXLR3T2HBLS-000H3, MZXLR6T4HALA-000H3, MZXLR12THALA-000H3, MZXLR960HBHQ-000H3, MZXLR1T9HBJR-000H3, MZXLR3T8HBLS-000H3, MZXLR7T6HALA-000H3 and MZXLR15THALA-000H 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 10 for ARM Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,法语,意大利语,德语,西班牙语,日语 English (US),French,Italian,German,Spanish,Japanese On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux (arm64) - MZXLR800HBHQ-000H3, MZXLR1T6HBJR-000H3, MZXLR3T2HBLS-000H3, MZXLR6T4HALA-000H3, MZXLR12THALA-000H3, MZXLR960HBHQ-000H3, MZXLR1T9HBJR-000H3, MZXLR3T8HBLS-000H3, MZXLR7T6HALA-000H3 and MZXLR15THALA-000H3 Drives

Release Version and/or Date:
MPK7825Q

Last Recommended or Critical Version:
None

Previous Version of Firmware:
None

Firmware Dependency:
None

Enhancements/New Features :

None

Problem Fixed:

Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.

Known Issues:

None

Last Recommended or Critical Version:
None

Previous Version of Firmware:
None

Firmware Dependency:
None

Enhancements/New Features :

None

Problem Fixed:

Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.

Known Issues:

None

]]> MZXLR12THALA-000H3 MZXLR15THALA-000H3 MZXLR7T6HALA-000H3 MZXLR1T6HBJR-000H3 MZXLR800HBHQ-000H3 MZXLR3T2HBLS-000H3 MZXLR6T4HALA-000H3 MZXLR1T9HBJR-000H3 MZXLR3T8HBLS-000H3 MZXLR960HBHQ-000H3 CP043037.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-951aefd63e-MPK7825Q-1.1.aarch64.rpm firmware-hdd-951aefd63e-MPK7825Q-1.1.aarch64.rpm file://./packages/firmware-hdd-951aefd63e-MPK7825Q-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/CP069900.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/MPK7825Q.bin ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP069900.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP069900.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 MZXLR800HBHQ-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3830-3048c3876295 MPK7825Q MZXLR1T6HBJR-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3154-3648ddfaa3a6 MPK7825Q MZXLR3T2HBLS-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3354-3248a4bea716 MPK7825Q MZXLR6T4HALA-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3654-3448e7bd3d2a MPK7825Q MZXLR12THALA-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3132-544869b8df72 MPK7825Q MZXLR960HBHQ-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3936-3048d2d64915 MPK7825Q MZXLR1T9HBJR-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3154-3948cda93afa MPK7825Q MZXLR3T8HBLS-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3354-3848df400867 MPK7825Q MZXLR7T6HALA-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3754-36484bc80db1 MPK7825Q MZXLR15THALA-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3135-5448e88a517e MPK7825Q Firmware RuntimeAgent new Agentless Management Service (iLO 6) for SUSE Linux Enterprise Server 16 for ARM-based Systems Agentless Management Service (iLO 6) for SUSE Linux Enterprise Server 16 for ARM-based Systems Agentless Management Service (iLO 6) for SUSE Linux Enterprise Server 16 for ARM-based Systems Agentless Management Service (iLO 6) for SUSE Linux Enterprise Server 16 for ARM-based Systems 惠普企业 Hewlett Packard Enterprise SUSE Linux Enterprise Server 16 for ARM Lights Out Lights Out 服务器 Server 软件 - 系统管理 Software - System Management 英语（美国） English (US)

amsd supported on HPE Gen11 Servers and later generations

amsd provides information to the iLO 6 service providing SNMP support.

]]>

amsd supported on HPE Gen11 Servers and later generations

amsd provides information to the iLO 6 service providing SNMP support.

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:
- rpm -Uvh amsd-<version>.rpm
To check whether the package is loaded properly type:
- systemctl status amsd
- systemctl status smad
Additional help is available by typing:
- man amsd

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:
- rpm -Uvh amsd-<version>.rpm
To check whether the package is loaded properly type:
- systemctl status amsd
- systemctl status smad
Additional help is available by typing:
- man amsd

]]> 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 103c 3307 1590 00E4 103c 3306 1590 00E4 103C 3306 1590 00E4 103C 3307 1590 00E4 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm amsd-4.5.0-2120.2.sles16.aarch64.rpm amsd-4.5.0-2120.2.sles16.aarch64.rpm file://./packages/amsd-4.5.0-2120.2.sles16.aarch64.rpm ./etc/sysconfig/ahslog ./etc/sysconfig/amsd ./etc/sysconfig/amsd_rev ./etc/sysconfig/cpqFca ./etc/sysconfig/cpqFca_rev ./etc/sysconfig/cpqIde ./etc/sysconfig/cpqIde_rev ./etc/sysconfig/cpqiScsi ./etc/sysconfig/smad ./etc/sysconfig/smad_rev ./opt/amsd ./opt/amsd/amsd.license ./sbin/ahslog ./sbin/amscli ./sbin/cpqiScsi ./usr/lib/.build-id ./usr/lib/.build-id/30 ./usr/lib/.build-id/30/654d9848672c31a9050d26e9181975c43b37dc ./usr/lib/.build-id/55 ./usr/lib/.build-id/55/108fb81a2dbaf6d828fca4e9dd6651a78379d4 ./usr/lib/.build-id/55/108fb81a2dbaf6d828fca4e9dd6651a78379d4.1 ./usr/lib/.build-id/7d ./usr/lib/.build-id/7d/a075f57d5a6b1e02edabb35a12f63fc6674fb0 ./usr/lib/.build-id/7d/a075f57d5a6b1e02edabb35a12f63fc6674fb0.1 ./usr/lib/.build-id/88 ./usr/lib/.build-id/88/ac1a6d136e90f03a8c61d05168060cc2957e75 ./usr/lib/.build-id/ce ./usr/lib/.build-id/ce/573fa413ab3e697955d62ecfdc893426193fbb ./usr/lib/.build-id/ce/573fa413ab3e697955d62ecfdc893426193fbb.1 ./usr/lib/.build-id/ed ./usr/lib/.build-id/ed/a606fd8126446d8de0db6dbb539260ff40b392 ./usr/lib/.build-id/f5 ./usr/lib/.build-id/f5/d4670698dd06fe343246a1218ae856a92f4038 ./usr/lib/.build-id/f5/d4670698dd06fe343246a1218ae856a92f4038.1 ./usr/lib/systemd/system/ahslog.service ./usr/lib/systemd/system/amsd.service ./usr/lib/systemd/system/amsd_rev.service ./usr/lib/systemd/system/cpqFca.service ./usr/lib/systemd/system/cpqFca_rev.service ./usr/lib/systemd/system/cpqIde.service ./usr/lib/systemd/system/cpqIde_rev.service ./usr/lib/systemd/system/cpqiScsi.service ./usr/lib/systemd/system/smad.service ./usr/lib/systemd/system/smad_rev.service ./usr/lib/udev/rules.d/81-cpqFca.rules ./usr/lib/udev/rules.d/81-cpqiScsi.rules ./usr/share/man/man8/ahslog.8.gz ./usr/share/man/man8/amsd.8.gz ./usr/share/man/man8/cpqFca.8.gz ./usr/share/man/man8/cpqIde.8.gz ./usr/share/man/man8/cpqiScsi.8.gz ./usr/share/man/man8/smad.8.gz ./usr/share/smartupdate/amsd/component.xml ./sbin/amsd ./sbin/amsd_rev ./sbin/cpqFca ./sbin/cpqFca_rev ./sbin/cpqIde ./sbin/cpqIde_rev ./sbin/smad ./sbin/smad_rev new Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage 惠普企业 Hewlett Packard Enterprise 服务器选项 ServerOptions 服务器 Server 固件 - 系统 ROM Firmware - System 英语（美国） English (US)

iLO 6 version 1.62 or later is required for Gen12 servers

iLO 6 version 1.10 or later is required for Gen11 servers

iLO 5 version 2.72 or later is required for Gen10 Plus servers

]]>

iLO 6 version 1.62 or later is required for Gen12 servers

iLO 6 version 1.10 or later is required for Gen11 servers

iLO 5 version 2.72 or later is required for Gen10 Plus servers

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)

]]> 9675b54e-1c96-44c3-a7a1-901504000000 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:sd:ubm HPE_UBM4_1.24_G.fwpkg HPE_UBM4_1.24_G.fwpkg file://./packages/HPE_UBM4_1.24_G.fwpkg HPE_UBM4_1.24_G.HPb HPE_UBM4_1.24_G.xml payload.json 4149ebb7-d64b-4654-b679-4280f349ea50 UBM4 Backplane PIC 0 True HPE_UBM4_1.24_G.HPb 600 1 True False False True Firmware True 9675b54e-1c96-44c3-a7a1-901504000000 1.24 FWPKG-v2 Firmware Bmc new Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux DEB aarch64 Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux DEB aarch64 Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux DEB aarch64 Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux DEB aarch64 惠普企业 Hewlett Packard Enterprise 网络 Networking 服务器 Server 固件 - 网络 Firmware - Network 英语（美国） English (US) Updating firmware with rpm installed:

Install the DEB as: dpkg -i <deb_filename>.deb. This will extract the contents to the '/usr/lib/aarch64-linux-gun' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gun/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
To uninstall, run: dpkg --remove <deb_package_name>

On Secure Boot Enable mode:

]]> Updating firmware with rpm installed:

Install the DEB as: dpkg -i <deb_filename>.deb. This will extract the contents to the '/usr/lib/aarch64-linux-gun' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gun/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
To uninstall, run: dpkg --remove <deb_package_name>

On Secure Boot Enable mode:

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21)	26.46.3048	MT_0000000575

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21)	26.46.3048	MT_0000000575

]]> 15b3 101f 15b3 0012 15B3 101E 15B3 0012 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 3600 firmware:nic_mlnx_mcx631102as_adat firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1_arm64.deb firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1_arm64.deb file://./packages/firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1/CP068332.xml ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1/acpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1/cpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1/fw-ConnectX6Lx-rel-26_46_3048-MCX631102AS-ADA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1/ilorest_chif.so ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1/mft-4.32.0-120.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1/mlxfwmanager ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068332.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068332.scexe ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-26.46.3048-1.1/hpsetup 79F0C163-0C13-4662-9DEA-09235FEF90CB MT_0000000575 10 .//fw-ConnectX6Lx-rel-26_46_3048-MCX631102AS-ADA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin 3600 1 True Firmware False a6b1a447-382a-5a4f-15b3-101f15b30012 26.46.3048 ComboFirmware RuntimeAgent new Online HDD/SSD Flash Component for Linux deb (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives Online HDD/SSD Flash Component for Linux deb (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux deb (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives

Release Version and/or Date:
HPK8

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux deb (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives

Release Version and/or Date:
HPK8

]]> VV003840KXWBF VV007680KXWBL VV015360KXWBN CP043255.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware-hdd-48624e387b-0HPK8-1.1_arm64.deb firmware-hdd-48624e387b-0HPK8-1.1_arm64.deb file://./packages/firmware-hdd-48624e387b-0HPK8-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/CP069849.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/SP54304KHPK8.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/setup ./usr/lib/aarch64-linux-gnu/scexe-compat/CP069849.scexe ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP069849.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VV003840KXWBF 10 False SP54304KHPK8.rel 300 1 False Firmware False 562340a5-3056-3330-3834-304b58574246 HPK8 VV007680KXWBL 10 False SP54304KHPK8.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304b5857424c HPK8 VV015360KXWBN 10 False SP54304KHPK8.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304b5857424e HPK8 Firmware RuntimeAgent new Online NVMe SSD Flash Component for Linux (arm64) - MV003200LYJKH, MV006400LYJKK, VV007680LYJKF and VV015360LYXMT Drives Online NVMe SSD Flash Component for Linux (arm64) - MV003200LYJKH, MV006400LYJKK, VV007680LYJKF and VV015360LYXMT Drives MV003200LYJKH, MV006400LYJKK, VV007680LYJKF and VV015360LYXMT Drives MV003200LYJKH, MV006400LYJKK, VV007680LYJKF and VV015360LYXMT Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux (arm64) - MV003200LYJKH, MV006400LYJKK, VV007680LYJKF and VV015360LYXMT Drives

Release Version and/or Date:
HPK4

]]> MV003200LYJKH MV006400LYJKK VV007680LYJKF VV015360LYXMT CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-03eeb5f134-HPK4-1.1.aarch64.rpm firmware-hdd-03eeb5f134-HPK4-1.1.aarch64.rpm file://./packages/firmware-hdd-03eeb5f134-HPK4-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/CP068512.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/KACM7AEFHPK4.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068512.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068512.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 MV003200LYJKH 10 False KACM7AEFHPK4.rel 300 1 False Firmware False 4d2340a5-3056-3330-3230-304c594a4b48 HPK4 MV006400LYJKK 10 False KACM7AEFHPK4.rel 300 1 False Firmware False 4d2340a5-3056-3630-3430-304c594a4b4b HPK4 VV007680LYJKF 10 False KACM7AEFHPK4.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304c594a4b46 HPK4 VV015360LYXMT 10 False KACM7AEFHPK4.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304c59584d54 HPK4 Firmware RuntimeAgent new Online HDD/SSD Flash Component for Linux deb (arm64) - MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives Online HDD/SSD Flash Component for Linux deb (arm64) - MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives

Release Version and/or Date:
HPK3

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives

Release Version and/or Date:
HPK3

]]> VV007680LYCAV VV003840LYCAU VV001920LYCBR MV006400LYCBB MV003200LYCBA MV001600LYCBT VV015360LYHDC CP043255.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware-hdd-52215d9185-0HPK3-1.1_arm64.deb firmware-hdd-52215d9185-0HPK3-1.1_arm64.deb file://./packages/firmware-hdd-52215d9185-0HPK3-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/CP068503.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/KACD8ALEHPK3.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/setup ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068503.scexe ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068503.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 MV001600LYCBT 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 4d2340a5-3056-3130-3630-304c59434254 HPK3 MV003200LYCBA 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 4d2340a5-3056-3330-3230-304c59434241 HPK3 MV006400LYCBB 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 4d2340a5-3056-3630-3430-304c59434242 HPK3 VV015360LYHDC 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304c59484443 HPK3 VV001920LYCBR 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 562340a5-3056-3130-3932-304c59434252 HPK3 VV003840LYCAU 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 562340a5-3056-3330-3834-304c59434155 HPK3 VV007680LYCAV 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304c59434156 HPK3 Firmware RuntimeAgent new Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux RPM aarch64 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 网络 Networking 服务器 Server 固件 - 网络 Firmware - Network 英语（美国） English (US) pdating firmware with rpm installed:

Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gnu' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gnu/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
To uninstall, run: rpm -e <rpm_package_name>

Updating firmware without installing rpm:

Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
This will extract the contents of the rpm to 'usr' folder in the current directory.
From the terminal, navigate to '/usr/lib/aarch64-linux-gnu/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

On Secure Boot Enable mode:

]]> pdating firmware with rpm installed:

Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gnu' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gnu/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
To uninstall, run: rpm -e <rpm_package_name>

Updating firmware without installing rpm:

Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
This will extract the contents of the rpm to 'usr' folder in the current directory.
From the terminal, navigate to '/usr/lib/aarch64-linux-gnu/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

On Secure Boot Enable mode:

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21)	26.46.3048	MT_0000000575

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21)	26.46.3048	MT_0000000575

]]> 15b3 101f 15b3 0012 15B3 101E 15B3 0012 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic_mlnx_mcx631102as_adat firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1.aarch64.rpm firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1.aarch64.rpm file://./packages/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1 ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/CP068333.xml ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/acpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/binx.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/fw-ConnectX6Lx-rel-26_46_3048-MCX631102AS-ADA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/ilorest_chif.so ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/mft-4.32.0-120.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/mlxfwmanager ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.46.3048-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068333.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068333.scexe 79F0C163-0C13-4662-9DEA-09235FEF90CB MT_0000000575 10 .//fw-ConnectX6Lx-rel-26_46_3048-MCX631102AS-ADA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin 360 1 True Firmware False a6b1a447-382a-5a4f-15b3-101f15b30012 26.46.3048 ComboFirmware RuntimeAgent new Online HDD/SSD Flash Component for Linux (arm64) - MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives Online HDD/SSD Flash Component for Linux (arm64) - MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives

Release Version and/or Date:
HPK3

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - MV001600LYCBT, MV003200LYCBA, MV006400LYCBB, VV015360LYHDC, VV001920LYCBR, VV003840LYCAU and VV007680LYCAV Drives

Release Version and/or Date:
HPK3

]]> VV007680LYCAV VV003840LYCAU VV001920LYCBR MV006400LYCBB MV003200LYCBA MV001600LYCBT VV015360LYHDC CP043255.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware-hdd-52215d9185-HPK3-1.1.aarch64.rpm firmware-hdd-52215d9185-HPK3-1.1.aarch64.rpm file://./packages/firmware-hdd-52215d9185-HPK3-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/CP068502.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/KACD8ALEHPK3.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-52215d9185-HPK3-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068502.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068502.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 MV001600LYCBT 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 4d2340a5-3056-3130-3630-304c59434254 HPK3 MV003200LYCBA 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 4d2340a5-3056-3330-3230-304c59434241 HPK3 MV006400LYCBB 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 4d2340a5-3056-3630-3430-304c59434242 HPK3 VV015360LYHDC 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304c59484443 HPK3 VV001920LYCBR 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 562340a5-3056-3130-3932-304c59434252 HPK3 VV003840LYCAU 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 562340a5-3056-3330-3834-304c59434155 HPK3 VV007680LYCAV 10 False KACD8ALEHPK3.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304c59434156 HPK3 Firmware RuntimeAgent new Online HDD/SSD Flash Component for Linux (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives Online HDD/SSD Flash Component for Linux (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives

Release Version and/or Date:
HPK8

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives

Release Version and/or Date:
HPK8

]]> VV003840KXWBF VV007680KXWBL VV015360KXWBN CP043255.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware-hdd-48624e387b-HPK8-1.1.aarch64.rpm firmware-hdd-48624e387b-HPK8-1.1.aarch64.rpm file://./packages/firmware-hdd-48624e387b-HPK8-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/CP069848.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/SP54304KHPK8.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK8-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP069848.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP069848.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VV003840KXWBF 10 False SP54304KHPK8.rel 300 1 False Firmware False 562340a5-3056-3330-3834-304b58574246 HPK8 VV007680KXWBL 10 False SP54304KHPK8.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304b5857424c HPK8 VV015360KXWBN 10 False SP54304KHPK8.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304b5857424e HPK8 Firmware RuntimeAgent new Online ROM Flash Firmware Package - HPE Integrated Lights-Out 6 Online ROM Flash Firmware Package - HPE Integrated Lights-Out 6 HPE Integrated Lights-Out 6 HPE Integrated Lights-Out 6 惠普企业 Hewlett Packard Enterprise Lights Out Lights Out 服务器 Server 固件 - Lights-Out Management Firmware - Lights-Out Management 英语（美国） English (US) Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
for best performance:

RESTful Interface Tool (iLOREST) 6.3.0
HPQLOCFG v6.1.0
Lights-Out XML Scripting Sample bundle 6.00.0
HPONCFG Windows 6.0.0.0(B)
HPONCFG Linux 6.1.0.0(A)
LOCFG v6.00.0 or later
HPLOMIG 6.1.0
Schema extender 6.1.0
Snap-in (x86) 6.0.0
Snap-in (x64) 6.0.0

NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.

NOTE: Below Points are applicable only for Intel and AMD

•   Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
•   The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
•   The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).

Supported Utilities for RL300

Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0

NOTE: Below Points are applicable only for RL300

Updated utilities and system libraries are required to support the iLO in High Security and Production Modes.
CNSA and FIPS mode are currently not supported. See the iLO 6 User Guide for the steps on how to disable FIPS and CNSA mode.
iLO Amplifier Pack, HPE GreenLake Compute Ops Management (COM), HPE OneView, and HPE Infosight for Servers do not support HPE ProLiant RL300 Gen 11 platform.
RedHat Enterprise Linux 8.6 is supported on HPE ProLiant RL300 servers

For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide

]]> Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
for best performance:

RESTful Interface Tool (iLOREST) 6.3.0
HPQLOCFG v6.1.0
Lights-Out XML Scripting Sample bundle 6.00.0
HPONCFG Windows 6.0.0.0(B)
HPONCFG Linux 6.1.0.0(A)
LOCFG v6.00.0 or later
HPLOMIG 6.1.0
Schema extender 6.1.0
Snap-in (x86) 6.0.0
Snap-in (x64) 6.0.0

NOTE: Below Points are applicable only for Intel and AMD

Supported Utilities for RL300

Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0

NOTE: Below Points are applicable only for RL300

Updated utilities and system libraries are required to support the iLO in High Security and Production Modes.
CNSA and FIPS mode are currently not supported. See the iLO 6 User Guide for the steps on how to disable FIPS and CNSA mode.
iLO Amplifier Pack, HPE GreenLake Compute Ops Management (COM), HPE OneView, and HPE Infosight for Servers do not support HPE ProLiant RL300 Gen 11 platform.
RedHat Enterprise Linux 8.6 is supported on HPE ProLiant RL300 servers

For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide

]]> To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

]]> To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

]]>

iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

http://www.hpe.com/info/ilo-docs

Select your lights-out product, then support & documents, then manuals.

Check the online help for additional information about how to use features.
Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.

]]>

iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

http://www.hpe.com/info/ilo-docs

Select your lights-out product, then support & documents, then manuals.

Check the online help for additional information about how to use features.
Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.

]]> 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 103c 3307 1590 00E4 103c 3306 1590 00E4 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:ilo6 ilo6_174.fwpkg ilo6_174.fwpkg file://./packages/ilo6_174.fwpkg ilo6_174.bin ilo6_174.xml payload.json readme.txt 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 iLO 6 120 True ilo6_174.bin 600 1 False False False False Firmware False e6d3c844-14a6-4f1f-84a3-c06013910406 1.74 iLO 6 120 True ilo6_174.bin 600 1 False False False False Firmware False e6d3c844-14a6-4f1f-84a3-c06013910306 1.74 iLO 6 120 True ilo6_174.bin 600 1 False False False False Firmware False e6d3c844-14a6-4f1f-84a3-c06013910206 1.74 iLO 6 120 True ilo6_174.bin 600 1 False False False False Firmware False e6d3c844-14a6-4f1f-84a3-c06013910106 1.74 iLO 6 120 True ilo6_174.bin 600 1 False False False False Firmware False e6d3c844-14a6-4f1f-84a3-c06013910006 1.74 FWPKG-v2 ComboFirmware Bmc new Agentless Management Service (iLO 6) for Red Hat Enterprise Linux 10 Server for ARM-based Servers Agentless Management Service (iLO 6) for Red Hat Enterprise Linux 10 Server for ARM-based Servers Agentless Management Service (iLO 6) for Red Hat Enterprise Linux 10 Server for ARM-based Servers Agentless Management Service (iLO 6) for Red Hat Enterprise Linux 10 Server for ARM-based Servers 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 10 for ARM Lights Out Lights Out 服务器 Server 软件 - 系统管理 Software - System Management 英语（美国） English (US)

amsd supported on HPE Gen11 Servers and later generations

amsd provides information to the iLO 6 service providing SNMP support.

]]>

amsd supported on HPE Gen11 Servers and later generations

amsd provides information to the iLO 6 service providing SNMP support.

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:
- rpm -Uvh amsd-<version>.rpm
To check whether the package is loaded properly type:
- systemctl status amsd
- systemctl status smad
Additional help is available by typing:
- man amsd

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:
- rpm -Uvh amsd-<version>.rpm
To check whether the package is loaded properly type:
- systemctl status amsd
- systemctl status smad
Additional help is available by typing:
- man amsd

]]> 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 103c 3306 1590 3307 103c 3307 1590 3307 103C 3306 1590 00E4 103C 3307 1590 00E4 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm amsd-4.5.0-2120.1.rhel10.aarch64.rpm amsd-4.5.0-2120.1.rhel10.aarch64.rpm file://./packages/amsd-4.5.0-2120.1.rhel10.aarch64.rpm ./etc/sysconfig/ahslog ./etc/sysconfig/amsd ./etc/sysconfig/amsd_rev ./etc/sysconfig/cpqFca ./etc/sysconfig/cpqFca_rev ./etc/sysconfig/cpqIde ./etc/sysconfig/cpqIde_rev ./etc/sysconfig/cpqiScsi ./etc/sysconfig/smad ./etc/sysconfig/smad_rev ./opt/amsd ./opt/amsd/amsd.license ./sbin/ahslog ./sbin/amscli ./sbin/cpqiScsi ./usr/lib/.build-id ./usr/lib/.build-id/12 ./usr/lib/.build-id/12/ce292aac9739d9baf5589b1482e82bb7490c62 ./usr/lib/.build-id/12/ce292aac9739d9baf5589b1482e82bb7490c62.1 ./usr/lib/.build-id/56 ./usr/lib/.build-id/56/6b72f3ed181c7a50d9c68e1cfd354341a99bfd ./usr/lib/.build-id/56/6b72f3ed181c7a50d9c68e1cfd354341a99bfd.1 ./usr/lib/.build-id/7e ./usr/lib/.build-id/7e/0412442fa353b82ff561786734a4968202e844 ./usr/lib/.build-id/7e/0412442fa353b82ff561786734a4968202e844.1 ./usr/lib/.build-id/8e ./usr/lib/.build-id/8e/11c36ef5352aae2c7444a8210541461702455e ./usr/lib/.build-id/8e/11c36ef5352aae2c7444a8210541461702455e.1 ./usr/lib/.build-id/d0 ./usr/lib/.build-id/d0/1cdd177ea3ab34fe2ba50f87df425975742a2d ./usr/lib/.build-id/da ./usr/lib/.build-id/da/9afa901b10ccb3418d5524d51885ac9595cc1c ./usr/lib/.build-id/ec ./usr/lib/.build-id/ec/2cb63d98c9dcab3088b990e721fa427064ed3c ./usr/lib/systemd/system/ahslog.service ./usr/lib/systemd/system/amsd.service ./usr/lib/systemd/system/amsd_rev.service ./usr/lib/systemd/system/cpqFca.service ./usr/lib/systemd/system/cpqFca_rev.service ./usr/lib/systemd/system/cpqIde.service ./usr/lib/systemd/system/cpqIde_rev.service ./usr/lib/systemd/system/cpqiScsi.service ./usr/lib/systemd/system/smad.service ./usr/lib/systemd/system/smad_rev.service ./usr/lib/udev/rules.d/81-cpqFca.rules ./usr/lib/udev/rules.d/81-cpqiScsi.rules ./usr/share/man/man8/ahslog.8.gz ./usr/share/man/man8/amsd.8.gz ./usr/share/man/man8/cpqFca.8.gz ./usr/share/man/man8/cpqIde.8.gz ./usr/share/man/man8/cpqiScsi.8.gz ./usr/share/man/man8/smad.8.gz ./usr/share/smartupdate/amsd/component.xml ./sbin/amsd ./sbin/amsd_rev ./sbin/cpqFca ./sbin/cpqFca_rev ./sbin/cpqIde ./sbin/cpqIde_rev ./sbin/smad ./sbin/smad_rev new Online NVMe SSD Flash Component for Linux deb (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives Online NVMe SSD Flash Component for Linux deb (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives

Release Version and/or Date:
HPK6

]]> VV015360KXNTP VV007680KXNTN VV003840KXNTH CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-f20279bc06-0HPK6-1.1_arm64.deb firmware-hdd-f20279bc06-0HPK6-1.1_arm64.deb file://./packages/firmware-hdd-f20279bc06-0HPK6-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/CP062950.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/GPM1743HPK6.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/setup ./usr/lib/aarch64-linux-gnu/scexe-compat/CP062950.scexe ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062950.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VV003840KXNTH 10 False GPM1743HPK6.rel 300 1 False Firmware False 562340a5-3056-3330-3834-304b584e5448 HPK6 VV007680KXNTN 10 False GPM1743HPK6.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304b584e544e HPK6 VV015360KXNTP 10 False GPM1743HPK6.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304b584e5450 HPK6 Firmware RuntimeAgent new Online HDD/SSD Flash Component for Linux (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives Online HDD/SSD Flash Component for Linux (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives

Release Version and/or Date:
HPK4

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives

Release Version and/or Date:
HPK4

]]> VS001920KXNXF VR000480KXNXE VR000960KXNZU CP043255.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware-hdd-2ba844ae8c-HPK4-1.1.aarch64.rpm firmware-hdd-2ba844ae8c-HPK4-1.1.aarch64.rpm file://./packages/firmware-hdd-2ba844ae8c-HPK4-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/CP068506.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/M7450ALLHPK4.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068506.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068506.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VR000480KXNXE 10 False M7450ALLHPK4.rel 300 1 False Firmware False 562340a5-3052-3030-3438-304b584e5845 HPK4 VR000960KXNZU 10 False M7450ALLHPK4.rel 300 1 False Firmware False 562340a5-3052-3030-3936-304b584e5a55 HPK4 VS001920KXNXF 10 False M7450ALLHPK4.rel 300 1 False Firmware False 562340a5-3053-3130-3932-304b584e5846 HPK4 Firmware RuntimeAgent new Agentless Management Service (iLO 6) for Ubuntu 24.04 LTS aarch64 Agentless Management Service (iLO 6) for Ubuntu 24.04 LTS aarch64 Agentless Management Service (iLO 6) for Ubuntu 24.04 LTS aarch64 Agentless Management Service (iLO 6) for Ubuntu 24.04 LTS aarch64 Ubuntu 24.04 LTS ARM 服务器 Server 软件 - 管理 Software - Management 英语（美国） English (US) Download the component and run the command "dpkg -i amsd_3.1.0-1748-jammy_arm64.deb"

]]> Download the component and run the command "dpkg -i amsd_3.1.0-1748-jammy_arm64.deb"

]]> 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:deb amsd_4.5.0-2120.4-ubuntu24_arm64.deb amsd_4.5.0-2120.4-ubuntu24_arm64.deb file://./packages/amsd_4.5.0-2120.4-ubuntu24_arm64.deb ./etc/default/ahslog ./etc/default/amsd ./etc/default/amsd_rev ./etc/default/cpqIde ./etc/default/cpqScsi ./etc/default/cpqiScsi ./etc/default/mr_cpqScsi ./etc/default/smad ./etc/default/smad_rev ./lib/udev/rules.d/81-cpqFca.rules ./lib/udev/rules.d/81-cpqiScsi.rules ./sbin/ahslog ./sbin/amscli ./sbin/amsd ./sbin/amsd_rev ./sbin/cpqFca ./sbin/cpqIde ./sbin/cpqiScsi ./sbin/smad ./sbin/smad_rev ./usr/lib/systemd/system/ahslog.service ./usr/lib/systemd/system/amsd.service ./usr/lib/systemd/system/amsd_rev.service ./usr/lib/systemd/system/cpqFca.service ./usr/lib/systemd/system/cpqIde.service ./usr/lib/systemd/system/cpqScsi.service ./usr/lib/systemd/system/cpqiScsi.service ./usr/lib/systemd/system/mr_cpqScsi.service ./usr/lib/systemd/system/smad.service ./usr/lib/systemd/system/smad_rev.service ./usr/share/amsd/amsd.license ./usr/share/doc/amsd/README.Debian ./usr/share/doc/amsd/changelog.Debian.gz ./usr/share/doc/amsd/copyright ./usr/share/man/man1/ahslog.1m.gz ./usr/share/man/man1/smad.1m.gz ./usr/share/man/man8/amsd.8.gz ./usr/share/man/man8/cpqFca.8.gz ./usr/share/man/man8/cpqiScsi.8.gz ./usr/share/man/man8/mr_cpqScsi.8.gz ./usr/share/smartupdate/amsd/component.xml new Online NVMe SSD Flash Component for Linux deb (arm64) - MV003200LYJKH, MV006400LYJKK, VV007680LYJKF and VV015360LYXMT Drives Online NVMe SSD Flash Component for Linux deb (arm64) - MV003200LYJKH, MV006400LYJKK, VV007680LYJKF and VV015360LYXMT Drives MV003200LYJKH, MV006400LYJKK, VV007680LYJKF and VV015360LYXMT Drives MV003200LYJKH, MV006400LYJKK, VV007680LYJKF and VV015360LYXMT Drives 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux deb (arm64) - MV003200LYJKH, MV006400LYJKK, VV007680LYJKF and VV015360LYXMT Drives

Release Version and/or Date:
HPK4

]]> MV006400LYJKK VV007680LYJKF VV015360LYXMT MV003200LYJKH CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-03eeb5f134-0HPK4-1.1_arm64.deb firmware-hdd-03eeb5f134-0HPK4-1.1_arm64.deb file://./packages/firmware-hdd-03eeb5f134-0HPK4-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/CP068513.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/KACM7AEFHPK4.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-03eeb5f134-HPK4-1.1/setup ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068513.scexe ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068513.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 MV003200LYJKH 10 False KACM7AEFHPK4.rel 300 1 False Firmware False 4d2340a5-3056-3330-3230-304c594a4b48 HPK4 MV006400LYJKK 10 False KACM7AEFHPK4.rel 300 1 False Firmware False 4d2340a5-3056-3630-3430-304c594a4b4b HPK4 VV007680LYJKF 10 False KACM7AEFHPK4.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304c594a4b46 HPK4 VV015360LYXMT 10 False KACM7AEFHPK4.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304c59584d54 HPK4 Firmware RuntimeAgent new Agentless Management Service (iLO 6) for Ubuntu 22.04 LTS aarch64 Agentless Management Service (iLO 6) for Ubuntu 22.04 LTS aarch64 Agentless Management Service (iLO 6) for Ubuntu 22.04 LTS aarch64 Agentless Management Service (iLO 6) for Ubuntu 22.04 LTS aarch64 Ubuntu 22.04 LTS ARM 服务器 Server 软件 - 管理 Software - Management 英语（美国） English (US) Download the component and run the command "dpkg -i amsd_3.1.0-1748-jammy_arm64.deb"

]]> Download the component and run the command "dpkg -i amsd_3.1.0-1748-jammy_arm64.deb"

]]> 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:deb amsd_4.5.0-2120.2-ubuntu22_arm64.deb amsd_4.5.0-2120.2-ubuntu22_arm64.deb file://./packages/amsd_4.5.0-2120.2-ubuntu22_arm64.deb ./etc/default/ahslog ./etc/default/amsd ./etc/default/amsd_rev ./etc/default/cpqIde ./etc/default/cpqScsi ./etc/default/cpqiScsi ./etc/default/mr_cpqScsi ./etc/default/smad ./etc/default/smad_rev ./lib/systemd/system/ahslog.service ./lib/systemd/system/amsd.service ./lib/systemd/system/amsd_rev.service ./lib/systemd/system/cpqFca.service ./lib/systemd/system/cpqFca_rev.service ./lib/systemd/system/cpqIde.service ./lib/systemd/system/cpqIde_rev.service ./lib/systemd/system/cpqScsi.service ./lib/systemd/system/cpqiScsi.service ./lib/systemd/system/mr_cpqScsi.service ./lib/systemd/system/smad.service ./lib/systemd/system/smad_rev.service ./lib/udev/rules.d/81-cpqFca.rules ./lib/udev/rules.d/81-cpqiScsi.rules ./sbin/ahslog ./sbin/amscli ./sbin/amsd ./sbin/amsd_rev ./sbin/cpqFca ./sbin/cpqIde ./sbin/cpqiScsi ./sbin/smad ./sbin/smad_rev ./usr/share/amsd/amsd.license ./usr/share/doc/amsd/README.Debian ./usr/share/doc/amsd/changelog.Debian.gz ./usr/share/doc/amsd/copyright ./usr/share/man/man1/ahslog.1m.gz ./usr/share/man/man1/smad.1m.gz ./usr/share/man/man8/amsd.8.gz ./usr/share/man/man8/cpqFca.8.gz ./usr/share/man/man8/cpqiScsi.8.gz ./usr/share/man/man8/mr_cpqScsi.8.gz ./usr/share/smartupdate/amsd/component.xml new Online NVMe SSD Flash Component for Linux deb (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives Online NVMe SSD Flash Component for Linux deb (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives

Release Version and/or Date:
HPK6

]]> MO001600KYDMU MO006400KYDND VO015360KYDNB VO007680KYDNA MO003200KYDNC VO001920KYDMT VO003840KYDMV CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-a27c95663d-0HPK6-1.1_arm64.deb firmware-hdd-a27c95663d-0HPK6-1.1_arm64.deb file://./packages/firmware-hdd-a27c95663d-0HPK6-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/CP068495.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/GPM173XAHPK6.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/setup ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068495.scexe ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068495.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VO001920KYDMT 10 False GPM173XAHPK6.rel 300 1 False Firmware False 562340a5-304f-3130-3932-304b59444d54 HPK6 VO003840KYDMV 10 False GPM173XAHPK6.rel 300 1 False Firmware False 562340a5-304f-3330-3834-304b59444d56 HPK6 MO001600KYDMU 10 False GPM173XAHPK6.rel 300 1 False Firmware False 4d2340a5-304f-3130-3630-304b59444d55 HPK6 MO003200KYDNC 10 False GPM173XAHPK6.rel 300 1 False Firmware False 4d2340a5-304f-3330-3230-304b59444e43 HPK6 MO006400KYDND 10 False GPM173XAHPK6.rel 300 1 False Firmware False 4d2340a5-304f-3630-3430-304b59444e44 HPK6 VO007680KYDNA 10 False GPM173XAHPK6.rel 300 1 False Firmware False 562340a5-304f-3730-3638-304b59444e41 HPK6 VO015360KYDNB 10 False GPM173XAHPK6.rel 300 1 False Firmware False 562340a5-304f-3531-3336-304b59444e42 HPK6 Firmware RuntimeAgent new Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux DEB aarch64 Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux DEB aarch64 Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux DEB aarch64 Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux DEB aarch64 惠普企业 Hewlett Packard Enterprise 网络 Networking 服务器 Server 固件 - 网络 Firmware - Network 英语（美国） English (US) Updating firmware with rpm installed:

Install the DEB as: dpkg -i <deb_filename>.deb. This will extract the contents to the '/usr/lib/aarch64-linux-gun' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gun/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the deb installed).
To uninstall, run: dpkg --remove <deb_package_name>

On Secure Boot Enable mode:

]]> Updating firmware with rpm installed:

Install the DEB as: dpkg -i <deb_filename>.deb. This will extract the contents to the '/usr/lib/aarch64-linux-gun' location.
The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder.
From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gun/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the deb installed).
To uninstall, run: dpkg --remove <deb_package_name>

On Secure Boot Enable mode:

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21)	26.46.3048	MT_0000000551

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21)	26.46.3048	MT_0000000551

]]> 15b3 101f 15b3 0007 15B3 101E 15B3 0007 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 3600 firmware:nic_mlnx_mcx631432as_adai firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1_arm64.deb firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1_arm64.deb file://./packages/firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1/CP068334.xml ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1/acpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1/cpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1/fw-ConnectX6Lx-rel-26_46_3048-MCX631432AS-ADA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1/ilorest_chif.so ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1/mft-4.32.0-120.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1/mlxfwmanager ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068334.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068334.scexe ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-26.46.3048-1.1/hpsetup 79F0C163-0C13-4662-9DEA-09235FEF90CB MT_0000000551 10 .//fw-ConnectX6Lx-rel-26_46_3048-MCX631432AS-ADA_Ax-UEFI-14.39.14-FlexBoot-3.8.100.signed.bin 3600 1 True Firmware False a6b1a447-382a-5a4f-15b3-101f15b30012 26.46.3048 ComboFirmware RuntimeAgent new Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives

Release Version and/or Date:
HPK7

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives

Release Version and/or Date:
HPK7

]]> VV007680LXUJF VV015360LXUJH MV006400LXUJL VV003840LXUJE MV003200LXUJK CP043255.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware-hdd-44d456ce65-HPK7-1.1.aarch64.rpm firmware-hdd-44d456ce65-HPK7-1.1.aarch64.rpm file://./packages/firmware-hdd-44d456ce65-HPK7-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/CP068496.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/KACM7ALEHPK7.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068496.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068496.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 MV003200LXUJK 10 False KACM7ALEHPK7.rel 300 1 False Firmware False 4d2340a5-3056-3330-3230-304c58554a4b HPK7 MV006400LXUJL 10 False KACM7ALEHPK7.rel 300 1 False Firmware False 4d2340a5-3056-3630-3430-304c58554a4c HPK7 VV003840LXUJE 10 False KACM7ALEHPK7.rel 300 1 False Firmware False 562340a5-3056-3330-3834-304c58554a45 HPK7 VV007680LXUJF 10 False KACM7ALEHPK7.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304c58554a46 HPK7 VV015360LXUJH 10 False KACM7ALEHPK7.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304c58554a48 HPK7 Firmware RuntimeAgent new [Internal] Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage [Internal] Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage 惠普企业 Hewlett Packard Enterprise 服务器选项 ServerOptions 服务器 Server 固件 - 系统 ROM Firmware - System 英语（美国） English (US)

iLO 6 version 1.62 or later is required for Gen12 servers

iLO 6 version 1.10 or later is required for Gen11 servers

iLO 5 version 2.72 or later is required for Gen10P servers

]]>

iLO 6 version 1.62 or later is required for Gen12 servers

iLO 6 version 1.10 or later is required for Gen11 servers

iLO 5 version 2.72 or later is required for Gen10P servers

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)

]]> 9675b54e-1c96-44c3-a7a1-901506000000 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:sd:ubm HPE_UBM6_1.06_A.fwpkg HPE_UBM6_1.06_A.fwpkg file://./packages/HPE_UBM6_1.06_A.fwpkg HPE_UBM6_1.06_A.HPb HPE_UBM6_1.06_A.xml payload.json 4149ebb7-d64b-4654-b679-4280f349ea50 UBM6 Backplane PIC 0 True HPE_UBM6_1.06_A.HPb 600 1 True False False True Firmware False 9675b54e-1c96-44c3-a7a1-901506000000 1.06 FWPKG-v2 Firmware Bmc new Online NVMe SSD Flash Component for Linux (arm64)- VV030720KYNYP Drive Online NVMe SSD Flash Component for Linux (arm64)- VV030720KYNYP Drive VV030720KYNYP Drive VV030720KYNYP Drive 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 10 for ARM Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
     Online NVMe SSD Flash Component for Linux (arm64) - VV030720KYNYP Drive
Release Version and/or Date:
     HPK6
Last Recommended or Critical Version:
     None
Previous Version of Firmware:
     None
Firmware Dependency:
     None

Enhancements/New Features:

None

Problems Fixed:

HPK6 is a planned maintenance release that follows the HPK3 FW release for 30.72TB (8K IU) Solid State Drive. This is a recommended FW release.
For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00150459en_us

Known Issues:
None

Enhancements/New Features:

None

Problems Fixed:

HPK6 is a planned maintenance release that follows the HPK3 FW release for 30.72TB (8K IU) Solid State Drive. This is a recommended FW release.
For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00150459en_us

Known Issues:
None

]]> VV030720KYNYP CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware-hdd-399ac3ba76-HPK6-1.1.aarch64.rpm firmware-hdd-399ac3ba76-HPK6-1.1.aarch64.rpm file://./packages/firmware-hdd-399ac3ba76-HPK6-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/CP069875.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/SP54308KHPK6.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-399ac3ba76-HPK6-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP069875.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP069875.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VV030720KYNYP 10 False SP54308KHPK6.rel 300 1 False Firmware False 562340a5-3056-3033-3732-304b594e5950 HPK6 Firmware RuntimeAgent new Online HDD/SSD Flash Component for Linux deb (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives Online HDD/SSD Flash Component for Linux deb (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives

Release Version and/or Date:
HPK7

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives

Release Version and/or Date:
HPK7

]]> VV007680LXUJF VV015360LXUJH MV006400LXUJL VV003840LXUJE MV003200LXUJK CP043255.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware-hdd-44d456ce65-0HPK7-1.1_arm64.deb firmware-hdd-44d456ce65-0HPK7-1.1_arm64.deb file://./packages/firmware-hdd-44d456ce65-0HPK7-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/CP068497.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/KACM7ALEHPK7.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK7-1.1/setup ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068497.scexe ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068497.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 MV003200LXUJK 10 False KACM7ALEHPK7.rel 300 1 False Firmware False 4d2340a5-3056-3330-3230-304c58554a4b HPK7 MV006400LXUJL 10 False KACM7ALEHPK7.rel 300 1 False Firmware False 4d2340a5-3056-3630-3430-304c58554a4c HPK7 VV003840LXUJE 10 False KACM7ALEHPK7.rel 300 1 False Firmware False 562340a5-3056-3330-3834-304c58554a45 HPK7 VV007680LXUJF 10 False KACM7ALEHPK7.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304c58554a46 HPK7 VV015360LXUJH 10 False KACM7ALEHPK7.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304c58554a48 HPK7 Firmware RuntimeAgent new Integrated Smart Update Tools for Linux ARM64 Integrated Smart Update Tools for Linux ARM64 Integrated Smart Update Tools for Linux ARM64 Integrated Smart Update Tools for Linux ARM64 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM SUSE Linux Enterprise Server 16 for ARM Red Hat Enterprise Linux 10 for ARM Lights Out Lights Out 服务器 Server 应用程序 - 系统管理 Application - System Management 英语（美国） English (US) For prerequisite information, please see the iSUT Release Notes.

]]> For prerequisite information, please see the iSUT Release Notes.

]]> Download the rpm package to a directory on your hard drive and change to that directory. Install by typing rpm -Uvh sut-XXX.aarch64.rpm.

]]> 103C 3307 1590 00E4 103C 3307 0000 0000 103C 3306 1590 00E4 103C 3306 0000 0000 103c 3306 1590 03BA 103c 3307 1590 03BA 103c 3306 1590 3307 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm sut-6.5.0-38.linux.aarch64.rpm Enter Polling interval in minutes. Minimum 5 minutes Maximum 1440 minutes. 0 12 0-9 * Mode in which SUT runs. 0 24 * * Enter the directory where the staging has to be done. The default path for staging directory is /var/tmp/sut/stagingdirectory. 0 255 0..9A..Z;a..z;-/ * Enter Polling interval in minutes. Minimum 5 minutes Maximum 1440 minutes. 0 12 0-9 * Mode in which SUT runs. 0 24 * * Enter the directory where the staging has to be done. The default path for staging directory is /var/tmp/sut/stagingdirectory. 0 255 0..9A..Z;a..z;-/ * sut-6.5.0-38.linux.aarch64.rpm file://./packages/sut-6.5.0-38.linux.aarch64.rpm ./opt/hp/hpsut/README.txt ./opt/sut/README.txt ./opt/sut/bin/26C2B797.pub ./opt/sut/bin/74C3A4A2.pub ./opt/sut/bin/B1275EA3.pub ./opt/sut/bin/gatherlogs.sh ./opt/sut/bin/hpsut ./opt/sut/bin/sut ./opt/sut/bin/x64/sum_drop_table_x64 ./opt/sut/config/sut_cfg_default.dat ./opt/sut/doc/OnDemandHelp.txt ./opt/sut/schemas/SUT.json ./opt/sut/schemas/SUTProvider.json ./opt/sut/schemas/SUTProvider_Gen10.json ./opt/sut/schemas/SUTRegistryEN_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryEN_Redfish.json ./opt/sut/schemas/SUTRegistryEN_Redfish_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings.json ./opt/sut/schemas/SUTSettingsSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSettingsSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings_Gen10.json ./opt/sut/schemas/SUTSystemInventorySchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSystemInventorySchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTTasksettings.json ./opt/sut/schemas/SUTTasksettings_Legacy_zipped.json.gz ./opt/sut/schemas/SUTTasksettings_Redfish_zipped.json.gz ./opt/sut/schemas/SUT_Gen10.json ./opt/sut/scripts/sut.service ./opt/sut/scripts/sutd ./usr/lib/.build-id ./usr/lib/.build-id/57 ./usr/lib/.build-id/57/374c6b2b55c3ea60f4ebaa7dfd1667b9b459f6 ./usr/lib/.build-id/e9 ./usr/lib/.build-id/e9/17b7715889ae16280d152c259fe8d49ae235e3 ./usr/share/man/man8/sut.8.gz ./usr/share/smartupdate/sut/component.xml new Online NVMe SSD Flash Component for Linux (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives Online NVMe SSD Flash Component for Linux (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> MO001600KYDMU MO006400KYDND VO015360KYDNB VO007680KYDNA MO003200KYDNC VO001920KYDMT VO003840KYDMV CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-a27c95663d-HPK6-1.1.aarch64.rpm firmware-hdd-a27c95663d-HPK6-1.1.aarch64.rpm file://./packages/firmware-hdd-a27c95663d-HPK6-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/CP068494.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/GPM173XAHPK6.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK6-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068494.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068494.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VO001920KYDMT 10 False GPM173XAHPK6.rel 300 1 False Firmware False 562340a5-304f-3130-3932-304b59444d54 HPK6 VO003840KYDMV 10 False GPM173XAHPK6.rel 300 1 False Firmware False 562340a5-304f-3330-3834-304b59444d56 HPK6 MO001600KYDMU 10 False GPM173XAHPK6.rel 300 1 False Firmware False 4d2340a5-304f-3130-3630-304b59444d55 HPK6 MO003200KYDNC 10 False GPM173XAHPK6.rel 300 1 False Firmware False 4d2340a5-304f-3330-3230-304b59444e43 HPK6 MO006400KYDND 10 False GPM173XAHPK6.rel 300 1 False Firmware False 4d2340a5-304f-3630-3430-304b59444e44 HPK6 VO007680KYDNA 10 False GPM173XAHPK6.rel 300 1 False Firmware False 562340a5-304f-3730-3638-304b59444e41 HPK6 VO015360KYDNB 10 False GPM173XAHPK6.rel 300 1 False Firmware False 562340a5-304f-3531-3336-304b59444e42 HPK6 Firmware RuntimeAgent new Online NVMe SSD Flash Component for Linux (arm64) - VR000480KXLXF Drive Online NVMe SSD Flash Component for Linux (arm64) - VR000480KXLXF Drive VR000480KXLXF Drive VR000480KXLXF Drive 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux (arm64) - VR000480KXLXF Drive

Release Version and/or Date:
HPK4

]]> VR000480KXLXF CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware-hdd-5adaf7ae6f-HPK4-1.1.aarch64.rpm firmware-hdd-5adaf7ae6f-HPK4-1.1.aarch64.rpm file://./packages/firmware-hdd-5adaf7ae6f-HPK4-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/CP068504.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/GPM9A3SAHPK4.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-5adaf7ae6f-HPK4-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068504.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068504.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VR000480KXLXF 10 False GPM9A3SAHPK4.rel 300 1 False Firmware False 562340a5-3052-3030-3438-304b584c5846 HPK4 Firmware RuntimeAgent new Agentless Management Service (iLO 6) for Red Hat Enterprise Linux 9 Server for ARM-based Servers Agentless Management Service (iLO 6) for Red Hat Enterprise Linux 9 Server for ARM-based Servers Agentless Management Service (iLO 6) for Red Hat Enterprise Linux 9 Server for ARM-based Servers Agentless Management Service (iLO 6) for Red Hat Enterprise Linux 9 Server for ARM-based Servers 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM Lights Out Lights Out 服务器 Server 软件 - 系统管理 Software - System Management 英语（美国） English (US)

amsd supported on HPE Gen11 Servers and later generations

amsd provides information to the iLO 6 service providing SNMP support.

]]>

amsd supported on HPE Gen11 Servers and later generations

amsd provides information to the iLO 6 service providing SNMP support.

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:
- rpm -Uvh amsd-<version>.rpm
To check whether the package is loaded properly type:
- systemctl status amsd
- systemctl status smad
Additional help is available by typing:
- man amsd

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:
- rpm -Uvh amsd-<version>.rpm
To check whether the package is loaded properly type:
- systemctl status amsd
- systemctl status smad
Additional help is available by typing:
- man amsd

]]> 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 103c 3306 1590 3307 103c 3307 1590 3307 103C 3306 1590 00E4 103C 3307 1590 00E4 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm amsd-4.5.0-2120.1.rhel9.aarch64.rpm amsd-4.5.0-2120.1.rhel9.aarch64.rpm file://./packages/amsd-4.5.0-2120.1.rhel9.aarch64.rpm ./etc/sysconfig/ahslog ./etc/sysconfig/amsd ./etc/sysconfig/amsd_rev ./etc/sysconfig/cpqFca ./etc/sysconfig/cpqFca_rev ./etc/sysconfig/cpqIde ./etc/sysconfig/cpqIde_rev ./etc/sysconfig/cpqiScsi ./etc/sysconfig/smad ./etc/sysconfig/smad_rev ./opt/amsd ./opt/amsd/amsd.license ./sbin/ahslog ./sbin/amscli ./sbin/cpqiScsi ./usr/lib/.build-id ./usr/lib/.build-id/33 ./usr/lib/.build-id/33/7a3ad375586c3ecd547600bab042e9d24b0007 ./usr/lib/.build-id/33/7a3ad375586c3ecd547600bab042e9d24b0007.1 ./usr/lib/.build-id/51 ./usr/lib/.build-id/51/c23d59109d3a946004f35e64b66e3c5b819179 ./usr/lib/.build-id/69 ./usr/lib/.build-id/69/00066038ac41edc70af210b35e45dc6d5c27e9 ./usr/lib/.build-id/69/00066038ac41edc70af210b35e45dc6d5c27e9.1 ./usr/lib/.build-id/6b ./usr/lib/.build-id/6b/3f789f1e88b45cba9fd7d72bc92de645cafc7b ./usr/lib/.build-id/7f ./usr/lib/.build-id/7f/4f4d94f83454a099bdd2f990f565672c7f0780 ./usr/lib/.build-id/7f/4f4d94f83454a099bdd2f990f565672c7f0780.1 ./usr/lib/.build-id/8e ./usr/lib/.build-id/8e/8639e78618d8f9e0c5de4f93c134770da64455 ./usr/lib/.build-id/8e/8639e78618d8f9e0c5de4f93c134770da64455.1 ./usr/lib/.build-id/c6 ./usr/lib/.build-id/c6/cb54646745f69a128eae63de054d30666bfc85 ./usr/lib/systemd/system/ahslog.service ./usr/lib/systemd/system/amsd.service ./usr/lib/systemd/system/amsd_rev.service ./usr/lib/systemd/system/cpqFca.service ./usr/lib/systemd/system/cpqFca_rev.service ./usr/lib/systemd/system/cpqIde.service ./usr/lib/systemd/system/cpqIde_rev.service ./usr/lib/systemd/system/cpqiScsi.service ./usr/lib/systemd/system/smad.service ./usr/lib/systemd/system/smad_rev.service ./usr/lib/udev/rules.d/81-cpqFca.rules ./usr/lib/udev/rules.d/81-cpqiScsi.rules ./usr/share/man/man8/ahslog.8.gz ./usr/share/man/man8/amsd.8.gz ./usr/share/man/man8/cpqFca.8.gz ./usr/share/man/man8/cpqIde.8.gz ./usr/share/man/man8/cpqiScsi.8.gz ./usr/share/man/man8/smad.8.gz ./usr/share/smartupdate/amsd/component.xml ./sbin/amsd ./sbin/amsd_rev ./sbin/cpqFca ./sbin/cpqFca_rev ./sbin/cpqIde ./sbin/cpqIde_rev ./sbin/smad ./sbin/smad_rev new ROM Flash Firmware Package - HPE ProLiant Compute DL384 Gen12 (R13) Servers ROM Flash Firmware Package - HPE ProLiant Compute DL384 Gen12 (R13) Servers HPE DL384 Gen12 (R13) Servers HPE DL384 Gen12 (R13) Servers 惠普企业 Hewlett Packard Enterprise 服务器 Server BIOS - System ROM BIOS - System ROM 英语（美国） English (US) To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately.

]]> To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately.

]]> cpqsetup.exe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 300 firmware:system R13_1.30_02_05_2026.fwpkg R13_1.30_02_05_2026.fwpkg file://./packages/R13_1.30_02_05_2026.fwpkg payload.json R13_1.30_02_05_2026.signed.flash R13_1.30_02_05_2026.xml aa148d2e-6e09-453e-bc6f-63baa5f5ccc4 System BIOS - R13 0 True R13_1.30_02_05_2026.signed.flash 300 1 False True False False Firmware True 00000000-0000-0000-0000-000000000272 v1.30 (02/05/2026) FWPKG-v2 Firmware Bmc new Online NVMe SSD Flash Component for Linux (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives Online NVMe SSD Flash Component for Linux (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Red Hat Enterprise Linux 10 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On RPM-based Linux system:

Update firmware by installing the rpm:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>.rpm. This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory.
Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives

Release Version and/or Date:
HPK6

]]> VV015360KXNTP VV007680KXNTN VV003840KXNTH CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-f20279bc06-HPK6-1.1.aarch64.rpm firmware-hdd-f20279bc06-HPK6-1.1.aarch64.rpm file://./packages/firmware-hdd-f20279bc06-HPK6-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/CP062479.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/GPM1743HPK6.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK6-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062479.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP062479.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VV003840KXNTH 10 False GPM1743HPK6.rel 300 1 False Firmware False 562340a5-3056-3330-3834-304b584e5448 HPK6 VV007680KXNTN 10 False GPM1743HPK6.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304b584e544e HPK6 VV015360KXNTP 10 False GPM1743HPK6.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304b584e5450 HPK6 Firmware RuntimeAgent new Online NVMe SSD Flash Component for Linux deb (arm64) - VR000480KYXPQ, VR000960KYXQA and VR001920KYXQB Drive Online NVMe SSD Flash Component for Linux deb (arm64) - VR000480KYXPQ, VR000960KYXQA and VR001920KYXQB Drive VR000480KYXPQ, VR000960KYXQA and VR001920KYXQB Drive VR000480KYXPQ, VR000960KYXQA and VR001920KYXQB Drive 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component for Linux deb (arm64) - VR000480KYXPQ, VR000960KYXQA and VR001920KYXQB Drive

Release Version and/or Date:
HPK2

]]> VR000480KYXPQ VR000960KYXQA VR001920KYXQB CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-4b748c8174-0HPK2-1.1_arm64.deb firmware-hdd-4b748c8174-0HPK2-1.1_arm64.deb file://./packages/firmware-hdd-4b748c8174-0HPK2-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/CP068509.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/KPE9010IHPK2.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-4b748c8174-HPK2-1.1/setup ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068509.scexe ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068509.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VR000480KYXPQ 10 False KPE9010IHPK2.rel 300 1 False Firmware False 562340a5-3052-3030-3438-304b59585051 HPK2 VR000960KYXQA 10 False KPE9010IHPK2.rel 300 1 False Firmware False 562340a5-3052-3030-3936-304b59585141 HPK2 VR001920KYXQB 10 False KPE9010IHPK2.rel 300 1 False Firmware False 562340a5-3052-3130-3932-304b59585142 HPK2 Firmware RuntimeAgent new Online NVMe SSD Flash Component for Linux deb (arm64) - MZXLR800HBHQ-000H3, MZXLR1T6HBJR-000H3, MZXLR3T2HBLS-000H3, MZXLR6T4HALA-000H3, MZXLR12THALA-000H3, MZXLR960HBHQ-000H3, MZXLR1T9HBJR-000H3, MZXLR3T8HBLS-000H3 and MZXLR7T6HALA-000H3 Drive Online NVMe SSD Flash Component for Linux deb (arm64) - MZXLR800HBHQ-000H3, MZXLR1T6HBJR-000H3, MZXLR3T2HBLS-000H3, MZXLR6T4HALA-000H3, MZXLR12THALA-000H3, MZXLR960HBHQ-000H3, MZXLR1T9HBJR-000H3, MZXLR3T8HBLS-000H3 and MZXLR7T6HALA-000H3 Drive MZXLR800HBHQ-000H3, MZXLR1T6HBJR-000H3, MZXLR3T2HBLS-000H3, MZXLR6T4HALA-000H3, MZXLR12THALA-000H3, MZXLR960HBHQ-000H3, MZXLR1T9HBJR-000H3, MZXLR3T8HBLS-000H3, MZXLR7T6HALA-000H3 and MZXLR15THALA-000H MZXLR800HBHQ-000H3, MZXLR1T6HBJR-000H3, MZXLR3T2HBLS-000H3, MZXLR6T4HALA-000H3, MZXLR12THALA-000H3, MZXLR960HBHQ-000H3, MZXLR1T9HBJR-000H3, MZXLR3T8HBLS-000H3, MZXLR7T6HALA-000H3 and MZXLR15THALA-000H 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,法语,意大利语,德语,西班牙语,日语 English (US),French,Italian,German,Spanish,Japanese On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online NVMe SSD Flash Component ffor Linux deb (arm64) - MZXLR800HBHQ-000H3, MZXLR1T6HBJR-000H3, MZXLR3T2HBLS-000H3, MZXLR6T4HALA-000H3, MZXLR12THALA-000H3, MZXLR960HBHQ-000H3, MZXLR1T9HBJR-000H3, MZXLR3T8HBLS-000H3, MZXLR7T6HALA-000H3 and MZXLR15THALA-000H3 Drives
Release Version and/or Date:
MPK7825Q

Last Recommended or Critical Version:
None

Previous Version of Firmware:
None

Firmware Dependency:
None

Enhancements/New Features :

None

Problem Fixed:

Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.

Known Issues:

None

Last Recommended or Critical Version:
None

Previous Version of Firmware:
None

Firmware Dependency:
None

Enhancements/New Features :

None

Problem Fixed:

Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.

Known Issues:

None

]]> MZXLR12THALA-000H3 MZXLR15THALA-000H3 MZXLR7T6HALA-000H3 MZXLR1T6HBJR-000H3 MZXLR800HBHQ-000H3 MZXLR3T2HBLS-000H3 MZXLR6T4HALA-000H3 MZXLR1T9HBJR-000H3 MZXLR3T8HBLS-000H3 MZXLR960HBHQ-000H3 CP043037.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-951aefd63e-0MPK7825Q-1.1_arm64.deb firmware-hdd-951aefd63e-0MPK7825Q-1.1_arm64.deb file://./packages/firmware-hdd-951aefd63e-0MPK7825Q-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/CP069901.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/MPK7825Q.bin ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-951aefd63e-MPK7825Q-1.1/setup ./usr/lib/aarch64-linux-gnu/scexe-compat/CP069901.scexe ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP069901.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 MZXLR800HBHQ-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3830-3048c3876295 MPK7825Q MZXLR1T6HBJR-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3154-3648ddfaa3a6 MPK7825Q MZXLR3T2HBLS-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3354-3248a4bea716 MPK7825Q MZXLR6T4HALA-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3654-3448e7bd3d2a MPK7825Q MZXLR12THALA-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3132-544869b8df72 MPK7825Q MZXLR960HBHQ-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3936-3048d2d64915 MPK7825Q MZXLR1T9HBJR-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3154-3948cda93afa MPK7825Q MZXLR3T8HBLS-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3354-3848df400867 MPK7825Q MZXLR7T6HALA-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3754-36484bc80db1 MPK7825Q MZXLR15THALA-000H3 10 False MPK7825Q.bin 300 1 False Firmware False 4d2340a5-585a-524c-3135-5448e88a517e MPK7825Q Firmware RuntimeAgent new Online HDD/SSD Flash Component for Linux deb (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives Online HDD/SSD Flash Component for Linux deb (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives 惠普企业 Hewlett Packard Enterprise 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 英语（美国）,日语,德语,法语,意大利语,西班牙语 English (US),Japanese,German,French,Italian,Spanish On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> On DEB-based Linux system:

Updating firmware by installing the deb:

Install the firmware deb using the command: dpkg -i <deb_filename>.deb. This extracts the contents of the deb to the '/usr/lib/aarch64-linux-gnu' location.
The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.
To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
To uninstall the deb, run the command: dpkg --purge <deb_package_name>, which is the deb filename without the '.deb' extension.

Updating firmware without installing the deb:

Extract the contents of the deb using the command: dpkg-deb -R <deb_filename>.deb <target_folder>.This extracts the contents of the deb to <target_folder> folder.
Navigate to the '<target_folder>/usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux deb (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives

Release Version and/or Date:
HPK4

]]> Deliverable Name:
Online HDD/SSD Flash Component for Linux deb (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives

Release Version and/or Date:
HPK4

]]> VS001920KXNXF VR000480KXNXE VR000960KXNZU CP043255.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware-hdd-2ba844ae8c-0HPK4-1.1_arm64.deb firmware-hdd-2ba844ae8c-0HPK4-1.1_arm64.deb file://./packages/firmware-hdd-2ba844ae8c-0HPK4-1.1_arm64.deb ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/CP068507.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/M7450ALLHPK4.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK4-1.1/setup ./usr/lib/aarch64-linux-gnu/scexe-compat/CP068507.scexe ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP068507.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VR000480KXNXE 10 False M7450ALLHPK4.rel 300 1 False Firmware False 562340a5-3052-3030-3438-304b584e5845 HPK4 VR000960KXNZU 10 False M7450ALLHPK4.rel 300 1 False Firmware False 562340a5-3052-3030-3936-304b584e5a55 HPK4 VS001920KXNXF 10 False M7450ALLHPK4.rel 300 1 False Firmware False 562340a5-3053-3130-3932-304b584e5846 HPK4 Firmware RuntimeAgent new Agentless Management Service (iLO 6) for SUSE Linux Enterprise Server 15 for ARM-based Systems Agentless Management Service (iLO 6) for SUSE Linux Enterprise Server 15 for ARM-based Systems Agentless Management Service (iLO 6) for SUSE Linux Enterprise Server 15 for ARM-based Systems Agentless Management Service (iLO 6) for SUSE Linux Enterprise Server 15 for ARM-based Systems 惠普企业 Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 for ARM Lights Out Lights Out 服务器 Server 软件 - 系统管理 Software - System Management 英语（美国） English (US)

amsd supported on HPE Gen11 Servers and later generations

amsd provides information to the iLO 6 service providing SNMP support

]]>

amsd supported on HPE Gen11 Servers and later generations

amsd provides information to the iLO 6 service providing SNMP support

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:
- rpm -Uvh amsd-<version>.rpm
To check whether the package is loaded properly type:
- systemctl status amsd
- systemctl status smad
Additional help is available by typing:
- man amsd

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:
- rpm -Uvh amsd-<version>.rpm
To check whether the package is loaded properly type:
- systemctl status amsd
- systemctl status smad
Additional help is available by typing:
- man amsd

]]> 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 103c 3307 1590 00E4 103c 3306 1590 00E4 103C 3306 1590 00E4 103C 3307 1590 00E4 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm amsd-4.5.0-2120.2.sles15.aarch64.rpm amsd-4.5.0-2120.2.sles15.aarch64.rpm file://./packages/amsd-4.5.0-2120.2.sles15.aarch64.rpm ./etc/sysconfig/ahslog ./etc/sysconfig/amsd ./etc/sysconfig/amsd_rev ./etc/sysconfig/cpqFca ./etc/sysconfig/cpqFca_rev ./etc/sysconfig/cpqIde ./etc/sysconfig/cpqIde_rev ./etc/sysconfig/cpqiScsi ./etc/sysconfig/smad ./etc/sysconfig/smad_rev ./opt/amsd ./opt/amsd/amsd.license ./sbin/ahslog ./sbin/amscli ./sbin/cpqiScsi ./usr/lib/.build-id ./usr/lib/.build-id/01 ./usr/lib/.build-id/01/97a31ced82c2e51291eb349e47e51f20d65649 ./usr/lib/.build-id/01/97a31ced82c2e51291eb349e47e51f20d65649.1 ./usr/lib/.build-id/16 ./usr/lib/.build-id/16/3d177c0f06789f9ee36a6207d18523c91e7ede ./usr/lib/.build-id/16/3d177c0f06789f9ee36a6207d18523c91e7ede.1 ./usr/lib/.build-id/55 ./usr/lib/.build-id/55/677d5e9465786531a7133307d08bd13a402898 ./usr/lib/.build-id/c0 ./usr/lib/.build-id/c0/74219b5b8670b08eed0a5306b1d05193ac778e ./usr/lib/.build-id/dc ./usr/lib/.build-id/dc/dfd444f7986c7ec285af19d30f983a35519fd6 ./usr/lib/.build-id/dc/dfd444f7986c7ec285af19d30f983a35519fd6.1 ./usr/lib/.build-id/e2 ./usr/lib/.build-id/e2/be89a57d8d9d1fc75848899e764f948982319f ./usr/lib/.build-id/e5 ./usr/lib/.build-id/e5/8da478b252083235c6ac402ba6a92e7b415488 ./usr/lib/.build-id/e5/8da478b252083235c6ac402ba6a92e7b415488.1 ./usr/lib/systemd/system/ahslog.service ./usr/lib/systemd/system/amsd.service ./usr/lib/systemd/system/amsd_rev.service ./usr/lib/systemd/system/cpqFca.service ./usr/lib/systemd/system/cpqFca_rev.service ./usr/lib/systemd/system/cpqIde.service ./usr/lib/systemd/system/cpqIde_rev.service ./usr/lib/systemd/system/cpqiScsi.service ./usr/lib/systemd/system/smad.service ./usr/lib/systemd/system/smad_rev.service ./usr/lib/udev/rules.d/81-cpqFca.rules ./usr/lib/udev/rules.d/81-cpqiScsi.rules ./usr/share/man/man8/ahslog.8.gz ./usr/share/man/man8/amsd.8.gz ./usr/share/man/man8/cpqFca.8.gz ./usr/share/man/man8/cpqIde.8.gz ./usr/share/man/man8/cpqiScsi.8.gz ./usr/share/man/man8/smad.8.gz ./usr/share/smartupdate/amsd/component.xml ./sbin/amsd ./sbin/amsd_rev ./sbin/cpqFca ./sbin/cpqFca_rev ./sbin/cpqIde ./sbin/cpqIde_rev ./sbin/smad ./sbin/smad_rev new Firmware Package - UBM5 Backplane PIC PLDM Firmware for Gen11 servers usage Firmware Package - UBM5 Backplane PIC PLDM Firmware for Gen11 servers usage Firmware Package - UBM5 Backplane PIC PLDM Firmware for Gen11 servers usage Firmware Package - UBM5 Backplane PIC PLDM Firmware for Gen11 servers usage 惠普企业 Hewlett Packard Enterprise 服务器选项 ServerOptions 服务器 Server 固件 - 系统 ROM Firmware - System 英语（美国） English (US) iLO 6 version 1.10 or later is required.

]]> iLO 6 version 1.10 or later is required.

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)

]]> 9675b54e-1c96-44c3-a7a1-901505000000 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 1200 firmware:sd:ubm HPE_UBM5_1.16_A.fwpkg HPE_UBM5_1.16_A.fwpkg file://./packages/HPE_UBM5_1.16_A.fwpkg HPE_UBM5_1.16_A.HPb HPE_UBM5_1.16_A.xml payload.json 4149ebb7-d64b-4654-b679-4280f349ea50 UBM5 Backplane PIC 0 True HPE_UBM5_1.16_A.HPb 1200 1 True False False True Firmware True 9675b54e-1c96-44c3-a7a1-901505000000 1.16 FWPKG-v2 Firmware Bmc